| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ulpi.c - USB ULPI PHY bus |
| * |
| * Copyright (C) 2015 Intel Corporation |
| * |
| * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| */ |
| |
| #include <linux/ulpi/interface.h> |
| #include <linux/ulpi/driver.h> |
| #include <linux/ulpi/regs.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/acpi.h> |
| #include <linux/debugfs.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/clk/clk-conf.h> |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| int ulpi_read(struct ulpi *ulpi, u8 addr) |
| { |
| return ulpi->ops->read(ulpi->dev.parent, addr); |
| } |
| EXPORT_SYMBOL_GPL(ulpi_read); |
| |
| int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) |
| { |
| return ulpi->ops->write(ulpi->dev.parent, addr, val); |
| } |
| EXPORT_SYMBOL_GPL(ulpi_write); |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| static int ulpi_match(struct device *dev, struct device_driver *driver) |
| { |
| struct ulpi_driver *drv = to_ulpi_driver(driver); |
| struct ulpi *ulpi = to_ulpi_dev(dev); |
| const struct ulpi_device_id *id; |
| |
| /* |
| * Some ULPI devices don't have a vendor id |
| * or provide an id_table so rely on OF match. |
| */ |
| if (ulpi->id.vendor == 0 || !drv->id_table) |
| return of_driver_match_device(dev, driver); |
| |
| for (id = drv->id_table; id->vendor; id++) |
| if (id->vendor == ulpi->id.vendor && |
| id->product == ulpi->id.product) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env) |
| { |
| struct ulpi *ulpi = to_ulpi_dev(dev); |
| int ret; |
| |
| ret = of_device_uevent_modalias(dev, env); |
| if (ret != -ENODEV) |
| return ret; |
| |
| if (add_uevent_var(env, "MODALIAS=ulpi:v%04xp%04x", |
| ulpi->id.vendor, ulpi->id.product)) |
| return -ENOMEM; |
| return 0; |
| } |
| |
| static int ulpi_probe(struct device *dev) |
| { |
| struct ulpi_driver *drv = to_ulpi_driver(dev->driver); |
| int ret; |
| |
| ret = of_clk_set_defaults(dev->of_node, false); |
| if (ret < 0) |
| return ret; |
| |
| return drv->probe(to_ulpi_dev(dev)); |
| } |
| |
| static void ulpi_remove(struct device *dev) |
| { |
| struct ulpi_driver *drv = to_ulpi_driver(dev->driver); |
| |
| if (drv->remove) |
| drv->remove(to_ulpi_dev(dev)); |
| } |
| |
| static struct bus_type ulpi_bus = { |
| .name = "ulpi", |
| .match = ulpi_match, |
| .uevent = ulpi_uevent, |
| .probe = ulpi_probe, |
| .remove = ulpi_remove, |
| }; |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int len; |
| struct ulpi *ulpi = to_ulpi_dev(dev); |
| |
| len = of_device_modalias(dev, buf, PAGE_SIZE); |
| if (len != -ENODEV) |
| return len; |
| |
| return sprintf(buf, "ulpi:v%04xp%04x\n", |
| ulpi->id.vendor, ulpi->id.product); |
| } |
| static DEVICE_ATTR_RO(modalias); |
| |
| static struct attribute *ulpi_dev_attrs[] = { |
| &dev_attr_modalias.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group ulpi_dev_attr_group = { |
| .attrs = ulpi_dev_attrs, |
| }; |
| |
| static const struct attribute_group *ulpi_dev_attr_groups[] = { |
| &ulpi_dev_attr_group, |
| NULL |
| }; |
| |
| static void ulpi_dev_release(struct device *dev) |
| { |
| of_node_put(dev->of_node); |
| kfree(to_ulpi_dev(dev)); |
| } |
| |
| static const struct device_type ulpi_dev_type = { |
| .name = "ulpi_device", |
| .groups = ulpi_dev_attr_groups, |
| .release = ulpi_dev_release, |
| }; |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| /** |
| * __ulpi_register_driver - register a driver with the ULPI bus |
| * @drv: driver being registered |
| * @module: ends up being THIS_MODULE |
| * |
| * Registers a driver with the ULPI bus. |
| */ |
| int __ulpi_register_driver(struct ulpi_driver *drv, struct module *module) |
| { |
| if (!drv->probe) |
| return -EINVAL; |
| |
| drv->driver.owner = module; |
| drv->driver.bus = &ulpi_bus; |
| |
| return driver_register(&drv->driver); |
| } |
| EXPORT_SYMBOL_GPL(__ulpi_register_driver); |
| |
| /** |
| * ulpi_unregister_driver - unregister a driver with the ULPI bus |
| * @drv: driver to unregister |
| * |
| * Unregisters a driver with the ULPI bus. |
| */ |
| void ulpi_unregister_driver(struct ulpi_driver *drv) |
| { |
| driver_unregister(&drv->driver); |
| } |
| EXPORT_SYMBOL_GPL(ulpi_unregister_driver); |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| static int ulpi_of_register(struct ulpi *ulpi) |
| { |
| struct device_node *np = NULL, *child; |
| struct device *parent; |
| |
| /* Find a ulpi bus underneath the parent or the grandparent */ |
| parent = ulpi->dev.parent; |
| if (parent->of_node) |
| np = of_get_child_by_name(parent->of_node, "ulpi"); |
| else if (parent->parent && parent->parent->of_node) |
| np = of_get_child_by_name(parent->parent->of_node, "ulpi"); |
| if (!np) |
| return 0; |
| |
| child = of_get_next_available_child(np, NULL); |
| of_node_put(np); |
| if (!child) |
| return -EINVAL; |
| |
| ulpi->dev.of_node = child; |
| |
| return 0; |
| } |
| |
| static int ulpi_read_id(struct ulpi *ulpi) |
| { |
| int ret; |
| |
| /* Test the interface */ |
| ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa); |
| if (ret < 0) |
| goto err; |
| |
| ret = ulpi_read(ulpi, ULPI_SCRATCH); |
| if (ret < 0) |
| return ret; |
| |
| if (ret != 0xaa) |
| goto err; |
| |
| ulpi->id.vendor = ulpi_read(ulpi, ULPI_VENDOR_ID_LOW); |
| ulpi->id.vendor |= ulpi_read(ulpi, ULPI_VENDOR_ID_HIGH) << 8; |
| |
| ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW); |
| ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8; |
| |
| /* Some ULPI devices don't have a vendor id so rely on OF match */ |
| if (ulpi->id.vendor == 0) |
| goto err; |
| |
| request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product); |
| return 0; |
| err: |
| of_device_request_module(&ulpi->dev); |
| return 0; |
| } |
| |
| static int ulpi_regs_read(struct seq_file *seq, void *data) |
| { |
| struct ulpi *ulpi = seq->private; |
| |
| #define ulpi_print(name, reg) do { \ |
| int ret = ulpi_read(ulpi, reg); \ |
| if (ret < 0) \ |
| return ret; \ |
| seq_printf(seq, name " %.02x\n", ret); \ |
| } while (0) |
| |
| ulpi_print("Vendor ID Low ", ULPI_VENDOR_ID_LOW); |
| ulpi_print("Vendor ID High ", ULPI_VENDOR_ID_HIGH); |
| ulpi_print("Product ID Low ", ULPI_PRODUCT_ID_LOW); |
| ulpi_print("Product ID High ", ULPI_PRODUCT_ID_HIGH); |
| ulpi_print("Function Control ", ULPI_FUNC_CTRL); |
| ulpi_print("Interface Control ", ULPI_IFC_CTRL); |
| ulpi_print("OTG Control ", ULPI_OTG_CTRL); |
| ulpi_print("USB Interrupt Enable Rising ", ULPI_USB_INT_EN_RISE); |
| ulpi_print("USB Interrupt Enable Falling", ULPI_USB_INT_EN_FALL); |
| ulpi_print("USB Interrupt Status ", ULPI_USB_INT_STS); |
| ulpi_print("USB Interrupt Latch ", ULPI_USB_INT_LATCH); |
| ulpi_print("Debug ", ULPI_DEBUG); |
| ulpi_print("Scratch Register ", ULPI_SCRATCH); |
| ulpi_print("Carkit Control ", ULPI_CARKIT_CTRL); |
| ulpi_print("Carkit Interrupt Delay ", ULPI_CARKIT_INT_DELAY); |
| ulpi_print("Carkit Interrupt Enable ", ULPI_CARKIT_INT_EN); |
| ulpi_print("Carkit Interrupt Status ", ULPI_CARKIT_INT_STS); |
| ulpi_print("Carkit Interrupt Latch ", ULPI_CARKIT_INT_LATCH); |
| ulpi_print("Carkit Pulse Control ", ULPI_CARKIT_PLS_CTRL); |
| ulpi_print("Transmit Positive Width ", ULPI_TX_POS_WIDTH); |
| ulpi_print("Transmit Negative Width ", ULPI_TX_NEG_WIDTH); |
| ulpi_print("Receive Polarity Recovery ", ULPI_POLARITY_RECOVERY); |
| |
| return 0; |
| } |
| |
| static int ulpi_regs_open(struct inode *inode, struct file *f) |
| { |
| struct ulpi *ulpi = inode->i_private; |
| |
| return single_open(f, ulpi_regs_read, ulpi); |
| } |
| |
| static const struct file_operations ulpi_regs_ops = { |
| .owner = THIS_MODULE, |
| .open = ulpi_regs_open, |
| .release = single_release, |
| .read = seq_read, |
| .llseek = seq_lseek |
| }; |
| |
| #define ULPI_ROOT debugfs_lookup(KBUILD_MODNAME, NULL) |
| |
| static int ulpi_register(struct device *dev, struct ulpi *ulpi) |
| { |
| int ret; |
| struct dentry *root; |
| |
| ulpi->dev.parent = dev; /* needed early for ops */ |
| ulpi->dev.bus = &ulpi_bus; |
| ulpi->dev.type = &ulpi_dev_type; |
| dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev)); |
| |
| ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev)); |
| |
| ret = ulpi_of_register(ulpi); |
| if (ret) |
| return ret; |
| |
| ret = ulpi_read_id(ulpi); |
| if (ret) { |
| of_node_put(ulpi->dev.of_node); |
| return ret; |
| } |
| |
| ret = device_register(&ulpi->dev); |
| if (ret) { |
| put_device(&ulpi->dev); |
| return ret; |
| } |
| |
| root = debugfs_create_dir(dev_name(dev), ULPI_ROOT); |
| debugfs_create_file("regs", 0444, root, ulpi, &ulpi_regs_ops); |
| |
| dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n", |
| ulpi->id.vendor, ulpi->id.product); |
| |
| return 0; |
| } |
| |
| /** |
| * ulpi_register_interface - instantiate new ULPI device |
| * @dev: USB controller's device interface |
| * @ops: ULPI register access |
| * |
| * Allocates and registers a ULPI device and an interface for it. Called from |
| * the USB controller that provides the ULPI interface. |
| */ |
| struct ulpi *ulpi_register_interface(struct device *dev, |
| const struct ulpi_ops *ops) |
| { |
| struct ulpi *ulpi; |
| int ret; |
| |
| ulpi = kzalloc(sizeof(*ulpi), GFP_KERNEL); |
| if (!ulpi) |
| return ERR_PTR(-ENOMEM); |
| |
| ulpi->ops = ops; |
| |
| ret = ulpi_register(dev, ulpi); |
| if (ret) { |
| kfree(ulpi); |
| return ERR_PTR(ret); |
| } |
| |
| return ulpi; |
| } |
| EXPORT_SYMBOL_GPL(ulpi_register_interface); |
| |
| /** |
| * ulpi_unregister_interface - unregister ULPI interface |
| * @ulpi: struct ulpi_interface |
| * |
| * Unregisters a ULPI device and it's interface that was created with |
| * ulpi_create_interface(). |
| */ |
| void ulpi_unregister_interface(struct ulpi *ulpi) |
| { |
| debugfs_remove_recursive(debugfs_lookup(dev_name(&ulpi->dev), |
| ULPI_ROOT)); |
| device_unregister(&ulpi->dev); |
| } |
| EXPORT_SYMBOL_GPL(ulpi_unregister_interface); |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| static int __init ulpi_init(void) |
| { |
| int ret; |
| struct dentry *root; |
| |
| root = debugfs_create_dir(KBUILD_MODNAME, NULL); |
| ret = bus_register(&ulpi_bus); |
| if (ret) |
| debugfs_remove(root); |
| return ret; |
| } |
| subsys_initcall(ulpi_init); |
| |
| static void __exit ulpi_exit(void) |
| { |
| bus_unregister(&ulpi_bus); |
| debugfs_remove_recursive(ULPI_ROOT); |
| } |
| module_exit(ulpi_exit); |
| |
| MODULE_AUTHOR("Intel Corporation"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("USB ULPI PHY bus"); |