Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml - linux - Git at Google

 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#

 title: ARM Generic Interrupt Controller, version 3

 maintainers:
   - Marc Zyngier <maz@kernel.org>

 description: |
   AArch64 SMP cores are often associated with a GICv3, providing Private
   Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
   Software Generated Interrupts (SGI), and Locality-specific Peripheral
   Interrupts (LPI).

 allOf:
   - $ref: /schemas/interrupt-controller.yaml#

 properties:
   compatible:
     oneOf:
       - items:
           - enum:
               - qcom,msm8996-gic-v3
           - const: arm,gic-v3
       - const: arm,gic-v3

   interrupt-controller: true

   "#address-cells":
     enum: [ 0, 1, 2 ]
   "#size-cells":
     enum: [ 1, 2 ]

   ranges: true

   "#interrupt-cells":
     description: |
       Specifies the number of cells needed to encode an interrupt source.
       Must be a single cell with a value of at least 3.
       If the system requires describing PPI affinity, then the value must
       be at least 4.

       The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
       interrupts, 2 for interrupts in the Extended SPI range, 3 for the
       Extended PPI range. Other values are reserved for future use.

       The 2nd cell contains the interrupt number for the interrupt type.
       SPI interrupts are in the range [0-987]. PPI interrupts are in the
       range [0-15]. Extended SPI interrupts are in the range [0-1023].
       Extended PPI interrupts are in the range [0-127].

       The 3rd cell is the flags, encoded as follows:
       bits[3:0] trigger type and level flags.
         1 = edge triggered
         4 = level triggered

       The 4th cell is a phandle to a node describing a set of CPUs this
       interrupt is affine to. The interrupt must be a PPI, and the node
       pointed must be a subnode of the "ppi-partitions" subnode. For
       interrupt types other than PPI or PPIs that are not partitionned,
       this cell must be zero. See the "ppi-partitions" node description
       below.

       Cells 5 and beyond are reserved for future use and must have a value
       of 0 if present.
     enum: [ 3, 4 ]

   reg:
     description: |
       Specifies base physical address(s) and size of the GIC
       registers, in the following order:
       - GIC Distributor interface (GICD)
       - GIC Redistributors (GICR), one range per redistributor region
       - GIC CPU interface (GICC)
       - GIC Hypervisor interface (GICH)
       - GIC Virtual CPU interface (GICV)

       GICC, GICH and GICV are optional, but must be described if the CPUs
       support them. Examples of such CPUs are ARM's implementations of the
       ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
       A73 (this list is not exhaustive).

     minItems: 2
     maxItems: 4096   # Should be enough?

   interrupts:
     description:
       Interrupt source of the VGIC maintenance interrupt.
     maxItems: 1

   redistributor-stride:
     description:
       If using padding pages, specifies the stride of consecutive
       redistributors. Must be a multiple of 64kB.
     $ref: /schemas/types.yaml#/definitions/uint64
     multipleOf: 0x10000
     exclusiveMinimum: 0

   "#redistributor-regions":
     description:
       The number of independent contiguous regions occupied by the
       redistributors. Required if more than one such region is present.
     $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 4096

   dma-noncoherent:
     description:
       Present if the GIC redistributors permit programming shareability
       and cacheability attributes but are connected to a non-coherent
       downstream interconnect.

   msi-controller:
     description:
       Only present if the Message Based Interrupt functionality is
       being exposed by the HW, and the mbi-ranges property present.

   mbi-ranges:
     description:
       A list of pairs <intid span>, where "intid" is the first SPI of a range
       that can be used an MBI, and "span" the size of that range. Multiple
       ranges can be provided.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
     items:
       minItems: 2
       maxItems: 2

   mbi-alias:
     description:
       Address property. Base address of an alias of the GICD region containing
       only the {SET,CLR}SPI registers to be used if isolation is required,
       and if supported by the HW.
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       minItems: 1
       maxItems: 2

   ppi-partitions:
     type: object
     additionalProperties: false
     description:
       PPI affinity can be expressed as a single "ppi-partitions" node,
       containing a set of sub-nodes.
     patternProperties:
       "^interrupt-partition-[0-9]+$":
         type: object
         additionalProperties: false
         properties:
           affinity:
             $ref: /schemas/types.yaml#/definitions/phandle-array
             items:
               maxItems: 1
             description:
               Should be a list of phandles to CPU nodes (as described in
               Documentation/devicetree/bindings/arm/cpus.yaml).

         required:
           - affinity

   clocks:
     maxItems: 1

   clock-names:
     items:
       - const: aclk

   power-domains:
     maxItems: 1

   resets:
     maxItems: 1

   mediatek,broken-save-restore-fw:
     type: boolean
     description:
       Asserts that the firmware on this device has issues saving and restoring
       GICR registers when the GIC redistributors are powered off.

 dependencies:
   mbi-ranges: [ msi-controller ]
   msi-controller: [ mbi-ranges ]

 required:
   - compatible
   - reg

 patternProperties:
   "^gic-its@": false
   "^interrupt-controller@[0-9a-f]+$": false
   # msi-controller is preferred, but allow other names
   "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$":
     type: object
     description:
       GICv3 has one or more Interrupt Translation Services (ITS) that are
       used to route Message Signalled Interrupts (MSI) to the CPUs.
     properties:
       compatible:
         const: arm,gic-v3-its

       dma-noncoherent:
         description:
           Present if the GIC ITS permits programming shareability and
           cacheability attributes but is connected to a non-coherent
           downstream interconnect.

       msi-controller: true

       "#msi-cells":
         description:
           The single msi-cell is the DeviceID of the device which will generate
           the MSI.
         const: 1

       reg:
         description:
           Specifies the base physical address and size of the ITS registers.
         maxItems: 1

       socionext,synquacer-pre-its:
         description:
           (u32, u32) tuple describing the untranslated
           address and size of the pre-ITS window.
         $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
           minItems: 2
           maxItems: 2

     required:
       - compatible
       - msi-controller
       - "#msi-cells"
       - reg

     additionalProperties: false

 additionalProperties: false

 examples:
   - |
     gic: interrupt-controller@2cf00000 {
       compatible = "arm,gic-v3";
       #interrupt-cells = <3>;
       #address-cells = <1>;
       #size-cells = <1>;
       ranges;
       interrupt-controller;
       reg = <0x2f000000 0x10000>,  // GICD
             <0x2f100000 0x200000>,  // GICR
             <0x2c000000 0x2000>,  // GICC
             <0x2c010000 0x2000>,  // GICH
             <0x2c020000 0x2000>;  // GICV
       interrupts = <1 9 4>;

       msi-controller;
       mbi-ranges = <256 128>;

       msi-controller@2c200000 {
         compatible = "arm,gic-v3-its";
         msi-controller;
         #msi-cells = <1>;
         reg = <0x2c200000 0x20000>;
       };
     };

   - |
     interrupt-controller@2c010000 {
       compatible = "arm,gic-v3";
       #interrupt-cells = <4>;
       #address-cells = <1>;
       #size-cells = <1>;
       ranges;
       interrupt-controller;
       redistributor-stride = <0x0 0x40000>;  // 256kB stride
       #redistributor-regions = <2>;
       reg = <0x2c010000 0x10000>,  // GICD
             <0x2d000000 0x800000>,  // GICR 1: CPUs 0-31
             <0x2e000000 0x800000>,  // GICR 2: CPUs 32-63
             <0x2c040000 0x2000>,  // GICC
             <0x2c060000 0x2000>,  // GICH
             <0x2c080000 0x2000>;  // GICV
       interrupts = <1 9 4 0>;

       msi-controller@2c200000 {
         compatible = "arm,gic-v3-its";
         msi-controller;
         #msi-cells = <1>;
         reg = <0x2c200000 0x20000>;
       };

       msi-controller@2c400000 {
         compatible = "arm,gic-v3-its";
         msi-controller;
         #msi-cells = <1>;
         reg = <0x2c400000 0x20000>;
       };

       ppi-partitions {
         part0: interrupt-partition-0 {
           affinity = <&cpu0>, <&cpu2>;
         };

         part1: interrupt-partition-1 {
           affinity = <&cpu1>, <&cpu3>;
         };
       };
     };


     device@0 {
       reg = <0 4>;
       interrupts = <1 1 4 &part0>;
     };

 ...
	# SPDX-License-Identifier: GPL-2.0
	%YAML 1.2
	---
	$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
	$schema: http://devicetree.org/meta-schemas/core.yaml#

	title: ARM Generic Interrupt Controller, version 3

	maintainers:
	- Marc Zyngier <maz@kernel.org>

	description: \|
	AArch64 SMP cores are often associated with a GICv3, providing Private
	Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
	Software Generated Interrupts (SGI), and Locality-specific Peripheral
	Interrupts (LPI).

	allOf:
	- $ref: /schemas/interrupt-controller.yaml#

	properties:
	compatible:
	oneOf:
	- items:
	- enum:
	- qcom,msm8996-gic-v3
	- const: arm,gic-v3
	- const: arm,gic-v3

	interrupt-controller: true

	"#address-cells":
	enum: [ 0, 1, 2 ]
	"#size-cells":
	enum: [ 1, 2 ]

	ranges: true

	"#interrupt-cells":
	description: \|
	Specifies the number of cells needed to encode an interrupt source.
	Must be a single cell with a value of at least 3.
	If the system requires describing PPI affinity, then the value must
	be at least 4.

	The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
	interrupts, 2 for interrupts in the Extended SPI range, 3 for the
	Extended PPI range. Other values are reserved for future use.

	The 2nd cell contains the interrupt number for the interrupt type.
	SPI interrupts are in the range [0-987]. PPI interrupts are in the
	range [0-15]. Extended SPI interrupts are in the range [0-1023].
	Extended PPI interrupts are in the range [0-127].

	The 3rd cell is the flags, encoded as follows:
	bits[3:0] trigger type and level flags.
	1 = edge triggered
	4 = level triggered

	The 4th cell is a phandle to a node describing a set of CPUs this
	interrupt is affine to. The interrupt must be a PPI, and the node
	pointed must be a subnode of the "ppi-partitions" subnode. For
	interrupt types other than PPI or PPIs that are not partitionned,
	this cell must be zero. See the "ppi-partitions" node description
	below.

	Cells 5 and beyond are reserved for future use and must have a value
	of 0 if present.
	enum: [ 3, 4 ]

	reg:
	description: \|
	Specifies base physical address(s) and size of the GIC
	registers, in the following order:
	- GIC Distributor interface (GICD)
	- GIC Redistributors (GICR), one range per redistributor region
	- GIC CPU interface (GICC)
	- GIC Hypervisor interface (GICH)
	- GIC Virtual CPU interface (GICV)

	GICC, GICH and GICV are optional, but must be described if the CPUs
	support them. Examples of such CPUs are ARM's implementations of the
	ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
	A73 (this list is not exhaustive).

	minItems: 2
	maxItems: 4096 # Should be enough?

	interrupts:
	description:
	Interrupt source of the VGIC maintenance interrupt.
	maxItems: 1

	redistributor-stride:
	description:
	If using padding pages, specifies the stride of consecutive
	redistributors. Must be a multiple of 64kB.
	$ref: /schemas/types.yaml#/definitions/uint64
	multipleOf: 0x10000
	exclusiveMinimum: 0

	"#redistributor-regions":
	description:
	The number of independent contiguous regions occupied by the
	redistributors. Required if more than one such region is present.
	$ref: /schemas/types.yaml#/definitions/uint32
	maximum: 4096

	dma-noncoherent:
	description:
	Present if the GIC redistributors permit programming shareability
	and cacheability attributes but are connected to a non-coherent
	downstream interconnect.

	msi-controller:
	description:
	Only present if the Message Based Interrupt functionality is
	being exposed by the HW, and the mbi-ranges property present.

	mbi-ranges:
	description:
	A list of pairs <intid span>, where "intid" is the first SPI of a range
	that can be used an MBI, and "span" the size of that range. Multiple
	ranges can be provided.
	$ref: /schemas/types.yaml#/definitions/uint32-matrix
	items:
	minItems: 2
	maxItems: 2

	mbi-alias:
	description:
	Address property. Base address of an alias of the GICD region containing
	only the {SET,CLR}SPI registers to be used if isolation is required,
	and if supported by the HW.
	$ref: /schemas/types.yaml#/definitions/uint32-array
	items:
	minItems: 1
	maxItems: 2

	ppi-partitions:
	type: object
	additionalProperties: false
	description:
	PPI affinity can be expressed as a single "ppi-partitions" node,
	containing a set of sub-nodes.
	patternProperties:
	"^interrupt-partition-[0-9]+$":
	type: object
	additionalProperties: false
	properties:
	affinity:
	$ref: /schemas/types.yaml#/definitions/phandle-array
	items:
	maxItems: 1
	description:
	Should be a list of phandles to CPU nodes (as described in
	Documentation/devicetree/bindings/arm/cpus.yaml).

	required:
	- affinity

	clocks:
	maxItems: 1

	clock-names:
	items:
	- const: aclk

	power-domains:
	maxItems: 1

	resets:
	maxItems: 1

	mediatek,broken-save-restore-fw:
	type: boolean
	description:
	Asserts that the firmware on this device has issues saving and restoring
	GICR registers when the GIC redistributors are powered off.

	dependencies:
	mbi-ranges: [ msi-controller ]
	msi-controller: [ mbi-ranges ]

	required:
	- compatible
	- reg

	patternProperties:
	"^gic-its@": false
	"^interrupt-controller@[0-9a-f]+$": false
	# msi-controller is preferred, but allow other names
	"^(msi-controller\|gic-its\|interrupt-controller)@[0-9a-f]+$":
	type: object
	description:
	GICv3 has one or more Interrupt Translation Services (ITS) that are
	used to route Message Signalled Interrupts (MSI) to the CPUs.
	properties:
	compatible:
	const: arm,gic-v3-its

	dma-noncoherent:
	description:
	Present if the GIC ITS permits programming shareability and
	cacheability attributes but is connected to a non-coherent
	downstream interconnect.

	msi-controller: true

	"#msi-cells":
	description:
	The single msi-cell is the DeviceID of the device which will generate
	the MSI.
	const: 1

	reg:
	description:
	Specifies the base physical address and size of the ITS registers.
	maxItems: 1

	socionext,synquacer-pre-its:
	description:
	(u32, u32) tuple describing the untranslated
	address and size of the pre-ITS window.
	$ref: /schemas/types.yaml#/definitions/uint32-array
	items:
	minItems: 2
	maxItems: 2

	required:
	- compatible
	- msi-controller
	- "#msi-cells"
	- reg

	additionalProperties: false

	additionalProperties: false

	examples:
	- \|
	gic: interrupt-controller@2cf00000 {
	compatible = "arm,gic-v3";
	#interrupt-cells = <3>;
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;
	interrupt-controller;
	reg = <0x2f000000 0x10000>, // GICD
	<0x2f100000 0x200000>, // GICR
	<0x2c000000 0x2000>, // GICC
	<0x2c010000 0x2000>, // GICH
	<0x2c020000 0x2000>; // GICV
	interrupts = <1 9 4>;

	msi-controller;
	mbi-ranges = <256 128>;

	msi-controller@2c200000 {
	compatible = "arm,gic-v3-its";
	msi-controller;
	#msi-cells = <1>;
	reg = <0x2c200000 0x20000>;
	};
	};

	- \|
	interrupt-controller@2c010000 {
	compatible = "arm,gic-v3";
	#interrupt-cells = <4>;
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;
	interrupt-controller;
	redistributor-stride = <0x0 0x40000>; // 256kB stride
	#redistributor-regions = <2>;
	reg = <0x2c010000 0x10000>, // GICD
	<0x2d000000 0x800000>, // GICR 1: CPUs 0-31
	<0x2e000000 0x800000>, // GICR 2: CPUs 32-63
	<0x2c040000 0x2000>, // GICC
	<0x2c060000 0x2000>, // GICH
	<0x2c080000 0x2000>; // GICV
	interrupts = <1 9 4 0>;

	msi-controller@2c200000 {
	compatible = "arm,gic-v3-its";
	msi-controller;
	#msi-cells = <1>;
	reg = <0x2c200000 0x20000>;
	};

	msi-controller@2c400000 {
	compatible = "arm,gic-v3-its";
	msi-controller;
	#msi-cells = <1>;
	reg = <0x2c400000 0x20000>;
	};

	ppi-partitions {
	part0: interrupt-partition-0 {
	affinity = <&cpu0>, <&cpu2>;
	};

	part1: interrupt-partition-1 {
	affinity = <&cpu1>, <&cpu3>;
	};
	};
	};


	device@0 {
	reg = <0 4>;
	interrupts = <1 1 4 &part0>;
	};

	...