| // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 |
| /* Copyright (c) 2018 Mellanox Technologies. All rights reserved */ |
| |
| #include <linux/netdevice.h> |
| #include <linux/netlink.h> |
| #include <linux/random.h> |
| #include <net/vxlan.h> |
| |
| #include "reg.h" |
| #include "spectrum_nve.h" |
| |
| /* Eth (18B) | IPv6 (40B) | UDP (8B) | VxLAN (8B) | Eth (14B) | IPv6 (40B) |
| * |
| * In the worst case - where we have a VLAN tag on the outer Ethernet |
| * header and IPv6 in overlay and underlay - we need to parse 128 bytes |
| */ |
| #define MLXSW_SP_NVE_VXLAN_PARSING_DEPTH 128 |
| #define MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH 96 |
| |
| #define MLXSW_SP_NVE_VXLAN_SUPPORTED_FLAGS VXLAN_F_UDP_ZERO_CSUM_TX |
| |
| static bool mlxsw_sp1_nve_vxlan_can_offload(const struct mlxsw_sp_nve *nve, |
| const struct net_device *dev, |
| struct netlink_ext_ack *extack) |
| { |
| struct vxlan_dev *vxlan = netdev_priv(dev); |
| struct vxlan_config *cfg = &vxlan->cfg; |
| |
| if (cfg->saddr.sa.sa_family != AF_INET) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: Only IPv4 underlay is supported"); |
| return false; |
| } |
| |
| if (vxlan_addr_multicast(&cfg->remote_ip)) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: Multicast destination IP is not supported"); |
| return false; |
| } |
| |
| if (vxlan_addr_any(&cfg->saddr)) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: Source address must be specified"); |
| return false; |
| } |
| |
| if (cfg->remote_ifindex) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: Local interface is not supported"); |
| return false; |
| } |
| |
| if (cfg->port_min || cfg->port_max) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: Only default UDP source port range is supported"); |
| return false; |
| } |
| |
| if (cfg->tos != 1) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: TOS must be configured to inherit"); |
| return false; |
| } |
| |
| if (cfg->flags & VXLAN_F_TTL_INHERIT) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: TTL must not be configured to inherit"); |
| return false; |
| } |
| |
| if (cfg->flags & VXLAN_F_LEARN) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: Learning is not supported"); |
| return false; |
| } |
| |
| if (!(cfg->flags & VXLAN_F_UDP_ZERO_CSUM_TX)) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: UDP checksum is not supported"); |
| return false; |
| } |
| |
| if (cfg->flags & ~MLXSW_SP_NVE_VXLAN_SUPPORTED_FLAGS) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: Unsupported flag"); |
| return false; |
| } |
| |
| if (cfg->ttl == 0) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: TTL must not be configured to 0"); |
| return false; |
| } |
| |
| if (cfg->label != 0) { |
| NL_SET_ERR_MSG_MOD(extack, "VxLAN: Flow label must be configured to 0"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void mlxsw_sp_nve_vxlan_config(const struct mlxsw_sp_nve *nve, |
| const struct net_device *dev, |
| struct mlxsw_sp_nve_config *config) |
| { |
| struct vxlan_dev *vxlan = netdev_priv(dev); |
| struct vxlan_config *cfg = &vxlan->cfg; |
| |
| config->type = MLXSW_SP_NVE_TYPE_VXLAN; |
| config->ttl = cfg->ttl; |
| config->flowlabel = cfg->label; |
| config->learning_en = cfg->flags & VXLAN_F_LEARN ? 1 : 0; |
| config->ul_tb_id = RT_TABLE_MAIN; |
| config->ul_proto = MLXSW_SP_L3_PROTO_IPV4; |
| config->ul_sip.addr4 = cfg->saddr.sin.sin_addr.s_addr; |
| config->udp_dport = cfg->dst_port; |
| } |
| |
| static int mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp, |
| unsigned int parsing_depth, |
| __be16 udp_dport) |
| { |
| char mprs_pl[MLXSW_REG_MPRS_LEN]; |
| |
| mlxsw_reg_mprs_pack(mprs_pl, parsing_depth, be16_to_cpu(udp_dport)); |
| return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(mprs), mprs_pl); |
| } |
| |
| static int |
| mlxsw_sp1_nve_vxlan_config_set(struct mlxsw_sp *mlxsw_sp, |
| const struct mlxsw_sp_nve_config *config) |
| { |
| char tngcr_pl[MLXSW_REG_TNGCR_LEN]; |
| u16 ul_vr_id; |
| u8 udp_sport; |
| int err; |
| |
| err = mlxsw_sp_router_tb_id_vr_id(mlxsw_sp, config->ul_tb_id, |
| &ul_vr_id); |
| if (err) |
| return err; |
| |
| mlxsw_reg_tngcr_pack(tngcr_pl, MLXSW_REG_TNGCR_TYPE_VXLAN, true, |
| config->ttl); |
| /* VxLAN driver's default UDP source port range is 32768 (0x8000) |
| * to 60999 (0xee47). Set the upper 8 bits of the UDP source port |
| * to a random number between 0x80 and 0xee |
| */ |
| get_random_bytes(&udp_sport, sizeof(udp_sport)); |
| udp_sport = (udp_sport % (0xee - 0x80 + 1)) + 0x80; |
| mlxsw_reg_tngcr_nve_udp_sport_prefix_set(tngcr_pl, udp_sport); |
| mlxsw_reg_tngcr_learn_enable_set(tngcr_pl, config->learning_en); |
| mlxsw_reg_tngcr_underlay_virtual_router_set(tngcr_pl, ul_vr_id); |
| mlxsw_reg_tngcr_usipv4_set(tngcr_pl, be32_to_cpu(config->ul_sip.addr4)); |
| |
| return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(tngcr), tngcr_pl); |
| } |
| |
| static void mlxsw_sp1_nve_vxlan_config_clear(struct mlxsw_sp *mlxsw_sp) |
| { |
| char tngcr_pl[MLXSW_REG_TNGCR_LEN]; |
| |
| mlxsw_reg_tngcr_pack(tngcr_pl, MLXSW_REG_TNGCR_TYPE_VXLAN, false, 0); |
| |
| mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(tngcr), tngcr_pl); |
| } |
| |
| static int mlxsw_sp1_nve_vxlan_rtdp_set(struct mlxsw_sp *mlxsw_sp, |
| unsigned int tunnel_index) |
| { |
| char rtdp_pl[MLXSW_REG_RTDP_LEN]; |
| |
| mlxsw_reg_rtdp_pack(rtdp_pl, MLXSW_REG_RTDP_TYPE_NVE, tunnel_index); |
| |
| return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rtdp), rtdp_pl); |
| } |
| |
| static int mlxsw_sp1_nve_vxlan_init(struct mlxsw_sp_nve *nve, |
| const struct mlxsw_sp_nve_config *config) |
| { |
| struct mlxsw_sp *mlxsw_sp = nve->mlxsw_sp; |
| int err; |
| |
| err = mlxsw_sp_nve_parsing_set(mlxsw_sp, |
| MLXSW_SP_NVE_VXLAN_PARSING_DEPTH, |
| config->udp_dport); |
| if (err) |
| return err; |
| |
| err = mlxsw_sp1_nve_vxlan_config_set(mlxsw_sp, config); |
| if (err) |
| goto err_config_set; |
| |
| err = mlxsw_sp1_nve_vxlan_rtdp_set(mlxsw_sp, nve->tunnel_index); |
| if (err) |
| goto err_rtdp_set; |
| |
| err = mlxsw_sp_router_nve_promote_decap(mlxsw_sp, config->ul_tb_id, |
| config->ul_proto, |
| &config->ul_sip, |
| nve->tunnel_index); |
| if (err) |
| goto err_promote_decap; |
| |
| return 0; |
| |
| err_promote_decap: |
| err_rtdp_set: |
| mlxsw_sp1_nve_vxlan_config_clear(mlxsw_sp); |
| err_config_set: |
| mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH, |
| config->udp_dport); |
| return err; |
| } |
| |
| static void mlxsw_sp1_nve_vxlan_fini(struct mlxsw_sp_nve *nve) |
| { |
| struct mlxsw_sp_nve_config *config = &nve->config; |
| struct mlxsw_sp *mlxsw_sp = nve->mlxsw_sp; |
| |
| mlxsw_sp_router_nve_demote_decap(mlxsw_sp, config->ul_tb_id, |
| config->ul_proto, &config->ul_sip); |
| mlxsw_sp1_nve_vxlan_config_clear(mlxsw_sp); |
| mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH, |
| config->udp_dport); |
| } |
| |
| const struct mlxsw_sp_nve_ops mlxsw_sp1_nve_vxlan_ops = { |
| .type = MLXSW_SP_NVE_TYPE_VXLAN, |
| .can_offload = mlxsw_sp1_nve_vxlan_can_offload, |
| .nve_config = mlxsw_sp_nve_vxlan_config, |
| .init = mlxsw_sp1_nve_vxlan_init, |
| .fini = mlxsw_sp1_nve_vxlan_fini, |
| }; |
| |
| static bool mlxsw_sp2_nve_vxlan_can_offload(const struct mlxsw_sp_nve *nve, |
| const struct net_device *dev, |
| struct netlink_ext_ack *extack) |
| { |
| return false; |
| } |
| |
| static int mlxsw_sp2_nve_vxlan_init(struct mlxsw_sp_nve *nve, |
| const struct mlxsw_sp_nve_config *config) |
| { |
| return -EOPNOTSUPP; |
| } |
| |
| static void mlxsw_sp2_nve_vxlan_fini(struct mlxsw_sp_nve *nve) |
| { |
| } |
| |
| const struct mlxsw_sp_nve_ops mlxsw_sp2_nve_vxlan_ops = { |
| .type = MLXSW_SP_NVE_TYPE_VXLAN, |
| .can_offload = mlxsw_sp2_nve_vxlan_can_offload, |
| .nve_config = mlxsw_sp_nve_vxlan_config, |
| .init = mlxsw_sp2_nve_vxlan_init, |
| .fini = mlxsw_sp2_nve_vxlan_fini, |
| }; |