| .. SPDX-License-Identifier: GPL-2.0+ |
| |
| ======================================================== |
| Linux Driver for the Pensando(R) Ethernet adapter family |
| ======================================================== |
| |
| Pensando Linux Ethernet driver. |
| Copyright(c) 2019 Pensando Systems, Inc |
| |
| Contents |
| ======== |
| |
| - Identifying the Adapter |
| - Support |
| |
| Identifying the Adapter |
| ======================= |
| |
| To find if one or more Pensando PCI Ethernet devices are installed on the |
| host, check for the PCI devices:: |
| |
| $ lspci -d 1dd8: |
| b5:00.0 Ethernet controller: Device 1dd8:1002 |
| b6:00.0 Ethernet controller: Device 1dd8:1002 |
| |
| If such devices are listed as above, then the ionic.ko driver should find |
| and configure them for use. There should be log entries in the kernel |
| messages such as these:: |
| |
| $ dmesg | grep ionic |
| ionic Pensando Ethernet NIC Driver, ver 0.15.0-k |
| ionic 0000:b5:00.0 enp181s0: renamed from eth0 |
| ionic 0000:b6:00.0 enp182s0: renamed from eth0 |
| |
| Support |
| ======= |
| For general Linux networking support, please use the netdev mailing |
| list, which is monitored by Pensando personnel:: |
| |
| netdev@vger.kernel.org |
| |
| For more specific support needs, please use the Pensando driver support |
| email:: |
| |
| drivers@pensando.io |
