| ===== General Properties ===== |
| |
| What: /sys/class/power_supply/<supply_name>/manufacturer |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the name of the device manufacturer. |
| |
| Access: Read |
| Valid values: Represented as string |
| |
| What: /sys/class/power_supply/<supply_name>/model_name |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the name of the device model. |
| |
| Access: Read |
| Valid values: Represented as string |
| |
| What: /sys/class/power_supply/<supply_name>/serial_number |
| Date: January 2008 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the serial number of the device. |
| |
| Access: Read |
| Valid values: Represented as string |
| |
| What: /sys/class/power_supply/<supply_name>/type |
| Date: May 2010 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Describes the main type of the supply. |
| |
| Access: Read |
| Valid values: "Battery", "UPS", "Mains", "USB" |
| |
| ===== Battery Properties ===== |
| |
| What: /sys/class/power_supply/<supply_name>/capacity |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Fine grain representation of battery capacity. |
| Access: Read |
| Valid values: 0 - 100 (percent) |
| |
| What: /sys/class/power_supply/<supply_name>/capacity_alert_max |
| Date: July 2012 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Maximum battery capacity trip-wire value where the supply will |
| notify user-space of the event. This is normally used for the |
| battery discharging scenario where user-space needs to know the |
| battery has dropped to an upper level so it can take |
| appropriate action (e.g. warning user that battery level is |
| low). |
| |
| Access: Read, Write |
| Valid values: 0 - 100 (percent) |
| |
| What: /sys/class/power_supply/<supply_name>/capacity_alert_min |
| Date: July 2012 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Minimum battery capacity trip-wire value where the supply will |
| notify user-space of the event. This is normally used for the |
| battery discharging scenario where user-space needs to know the |
| battery has dropped to a lower level so it can take |
| appropriate action (e.g. warning user that battery level is |
| critically low). |
| |
| Access: Read, Write |
| Valid values: 0 - 100 (percent) |
| |
| What: /sys/class/power_supply/<supply_name>/capacity_level |
| Date: June 2009 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Coarse representation of battery capacity. |
| |
| Access: Read |
| Valid values: "Unknown", "Critical", "Low", "Normal", "High", |
| "Full" |
| |
| What: /sys/class/power_supply/<supply_name>/current_avg |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports an average IBAT current reading for the battery, over a |
| fixed period. Normally devices will provide a fixed interval in |
| which they average readings to smooth out the reported value. |
| |
| Access: Read |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/current_max |
| Date: October 2010 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the maximum IBAT current allowed into the battery. |
| |
| Access: Read |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/current_now |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports an instant, single IBAT current reading for the battery. |
| This value is not averaged/smoothed. |
| |
| Access: Read |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/charge_control_limit |
| Date: Oct 2012 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Maximum allowable charging current. Used for charge rate |
| throttling for thermal cooling or improving battery health. |
| |
| Access: Read, Write |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/charge_control_limit_max |
| Date: Oct 2012 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Maximum legal value for the charge_control_limit property. |
| |
| Access: Read |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/charge_control_start_threshold |
| Date: April 2019 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Represents a battery percentage level, below which charging will |
| begin. |
| |
| Access: Read, Write |
| Valid values: 0 - 100 (percent) |
| |
| What: /sys/class/power_supply/<supply_name>/charge_control_end_threshold |
| Date: April 2019 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Represents a battery percentage level, above which charging will |
| stop. |
| |
| Access: Read, Write |
| Valid values: 0 - 100 (percent) |
| |
| What: /sys/class/power_supply/<supply_name>/charge_type |
| Date: July 2009 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Represents the type of charging currently being applied to the |
| battery. "Trickle", "Fast", and "Standard" all mean different |
| charging speeds. "Adaptive" means that the charger uses some |
| algorithm to adjust the charge rate dynamically, without |
| any user configuration required. "Custom" means that the charger |
| uses the charge_control_* properties as configuration for some |
| different algorithm. |
| |
| Access: Read, Write |
| Valid values: "Unknown", "N/A", "Trickle", "Fast", "Standard", |
| "Adaptive", "Custom" |
| |
| What: /sys/class/power_supply/<supply_name>/charge_term_current |
| Date: July 2014 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the charging current value which is used to determine |
| when the battery is considered full and charging should end. |
| |
| Access: Read |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/health |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the health of the battery or battery side of charger |
| functionality. |
| |
| Access: Read |
| Valid values: "Unknown", "Good", "Overheat", "Dead", |
| "Over voltage", "Unspecified failure", "Cold", |
| "Watchdog timer expire", "Safety timer expire", |
| "Over current" |
| |
| What: /sys/class/power_supply/<supply_name>/precharge_current |
| Date: June 2017 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the charging current applied during pre-charging phase |
| for a battery charge cycle. |
| |
| Access: Read |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/present |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports whether a battery is present or not in the system. |
| |
| Access: Read |
| Valid values: |
| 0: Absent |
| 1: Present |
| |
| What: /sys/class/power_supply/<supply_name>/status |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Represents the charging status of the battery. Normally this |
| is read-only reporting although for some supplies this can be |
| used to enable/disable charging to the battery. |
| |
| Access: Read, Write |
| Valid values: "Unknown", "Charging", "Discharging", |
| "Not charging", "Full" |
| |
| What: /sys/class/power_supply/<supply_name>/technology |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Describes the battery technology supported by the supply. |
| |
| Access: Read |
| Valid values: "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", |
| "NiCd", "LiMn" |
| |
| What: /sys/class/power_supply/<supply_name>/temp |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the current TBAT battery temperature reading. |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/temp_alert_max |
| Date: July 2012 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Maximum TBAT temperature trip-wire value where the supply will |
| notify user-space of the event. This is normally used for the |
| battery charging scenario where user-space needs to know the |
| battery temperature has crossed an upper threshold so it can |
| take appropriate action (e.g. warning user that battery level is |
| critically high, and charging has stopped). |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/temp_alert_min |
| Date: July 2012 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Minimum TBAT temperature trip-wire value where the supply will |
| notify user-space of the event. This is normally used for the |
| battery charging scenario where user-space needs to know the |
| battery temperature has crossed a lower threshold so it can take |
| appropriate action (e.g. warning user that battery level is |
| high, and charging current has been reduced accordingly to |
| remedy the situation). |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/temp_max |
| Date: July 2014 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the maximum allowed TBAT battery temperature for |
| charging. |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/temp_min |
| Date: July 2014 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the minimum allowed TBAT battery temperature for |
| charging. |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/voltage_avg, |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports an average VBAT voltage reading for the battery, over a |
| fixed period. Normally devices will provide a fixed interval in |
| which they average readings to smooth out the reported value. |
| |
| Access: Read |
| Valid values: Represented in microvolts |
| |
| What: /sys/class/power_supply/<supply_name>/voltage_max, |
| Date: January 2008 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the maximum safe VBAT voltage permitted for the battery, |
| during charging. |
| |
| Access: Read |
| Valid values: Represented in microvolts |
| |
| What: /sys/class/power_supply/<supply_name>/voltage_min, |
| Date: January 2008 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the minimum safe VBAT voltage permitted for the battery, |
| during discharging. |
| |
| Access: Read |
| Valid values: Represented in microvolts |
| |
| What: /sys/class/power_supply/<supply_name>/voltage_now, |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports an instant, single VBAT voltage reading for the battery. |
| This value is not averaged/smoothed. |
| |
| Access: Read |
| Valid values: Represented in microvolts |
| |
| ===== USB Properties ===== |
| |
| What: /sys/class/power_supply/<supply_name>/current_avg |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports an average IBUS current reading over a fixed period. |
| Normally devices will provide a fixed interval in which they |
| average readings to smooth out the reported value. |
| |
| Access: Read |
| Valid values: Represented in microamps |
| |
| |
| What: /sys/class/power_supply/<supply_name>/current_max |
| Date: October 2010 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the maximum IBUS current the supply can support. |
| |
| Access: Read |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/current_now |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the IBUS current supplied now. This value is generally |
| read-only reporting, unless the 'online' state of the supply |
| is set to be programmable, in which case this value can be set |
| within the reported min/max range. |
| |
| Access: Read, Write |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/input_current_limit |
| Date: July 2014 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Details the incoming IBUS current limit currently set in the |
| supply. Normally this is configured based on the type of |
| connection made (e.g. A configured SDP should output a maximum |
| of 500mA so the input current limit is set to the same value). |
| Use preferably input_power_limit, and for problems that can be |
| solved using power limit use input_current_limit. |
| |
| Access: Read, Write |
| Valid values: Represented in microamps |
| |
| What: /sys/class/power_supply/<supply_name>/input_voltage_limit |
| Date: May 2019 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| This entry configures the incoming VBUS voltage limit currently |
| set in the supply. Normally this is configured based on |
| system-level knowledge or user input (e.g. This is part of the |
| Pixel C's thermal management strategy to effectively limit the |
| input power to 5V when the screen is on to meet Google's skin |
| temperature targets). Note that this feature should not be |
| used for safety critical things. |
| Use preferably input_power_limit, and for problems that can be |
| solved using power limit use input_voltage_limit. |
| |
| Access: Read, Write |
| Valid values: Represented in microvolts |
| |
| What: /sys/class/power_supply/<supply_name>/input_power_limit |
| Date: May 2019 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| This entry configures the incoming power limit currently set |
| in the supply. Normally this is configured based on |
| system-level knowledge or user input. Use preferably this |
| feature to limit the incoming power and use current/voltage |
| limit only for problems that can be solved using power limit. |
| |
| Access: Read, Write |
| Valid values: Represented in microwatts |
| |
| What: /sys/class/power_supply/<supply_name>/online, |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Indicates if VBUS is present for the supply. When the supply is |
| online, and the supply allows it, then it's possible to switch |
| between online states (e.g. Fixed -> Programmable for a PD_PPS |
| USB supply so voltage and current can be controlled). |
| |
| Access: Read, Write |
| Valid values: |
| 0: Offline |
| 1: Online Fixed - Fixed Voltage Supply |
| 2: Online Programmable - Programmable Voltage Supply |
| |
| What: /sys/class/power_supply/<supply_name>/temp |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the current supply temperature reading. This would |
| normally be the internal temperature of the device itself (e.g |
| TJUNC temperature of an IC) |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/temp_alert_max |
| Date: July 2012 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Maximum supply temperature trip-wire value where the supply will |
| notify user-space of the event. This is normally used for the |
| charging scenario where user-space needs to know the supply |
| temperature has crossed an upper threshold so it can take |
| appropriate action (e.g. warning user that the supply |
| temperature is critically high, and charging has stopped to |
| remedy the situation). |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/temp_alert_min |
| Date: July 2012 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Minimum supply temperature trip-wire value where the supply will |
| notify user-space of the event. This is normally used for the |
| charging scenario where user-space needs to know the supply |
| temperature has crossed a lower threshold so it can take |
| appropriate action (e.g. warning user that the supply |
| temperature is high, and charging current has been reduced |
| accordingly to remedy the situation). |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/temp_max |
| Date: July 2014 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the maximum allowed supply temperature for operation. |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/temp_min |
| Date: July 2014 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the mainimum allowed supply temperature for operation. |
| |
| Access: Read |
| Valid values: Represented in 1/10 Degrees Celsius |
| |
| What: /sys/class/power_supply/<supply_name>/usb_type |
| Date: March 2018 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports what type of USB connection is currently active for |
| the supply, for example it can show if USB-PD capable source |
| is attached. |
| |
| Access: Read-Only |
| Valid values: "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD", |
| "PD_DRP", "PD_PPS", "BrickID" |
| |
| What: /sys/class/power_supply/<supply_name>/voltage_max |
| Date: January 2008 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the maximum VBUS voltage the supply can support. |
| |
| Access: Read |
| Valid values: Represented in microvolts |
| |
| What: /sys/class/power_supply/<supply_name>/voltage_min |
| Date: January 2008 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the minimum VBUS voltage the supply can support. |
| |
| Access: Read |
| Valid values: Represented in microvolts |
| |
| What: /sys/class/power_supply/<supply_name>/voltage_now |
| Date: May 2007 |
| Contact: linux-pm@vger.kernel.org |
| Description: |
| Reports the VBUS voltage supplied now. This value is generally |
| read-only reporting, unless the 'online' state of the supply |
| is set to be programmable, in which case this value can be set |
| within the reported min/max range. |
| |
| Access: Read, Write |
| Valid values: Represented in microvolts |
| |
| ===== Device Specific Properties ===== |
| |
| What: /sys/class/power/ds2760-battery.*/charge_now |
| Date: May 2010 |
| KernelVersion: 2.6.35 |
| Contact: Daniel Mack <daniel@caiaq.de> |
| Description: |
| This file is writeable and can be used to set the current |
| coloumb counter value inside the battery monitor chip. This |
| is needed for unavoidable corrections of aging batteries. |
| A userspace daemon can monitor the battery charging logic |
| and once the counter drops out of considerable bounds, take |
| appropriate action. |
| |
| What: /sys/class/power/ds2760-battery.*/charge_full |
| Date: May 2010 |
| KernelVersion: 2.6.35 |
| Contact: Daniel Mack <daniel@caiaq.de> |
| Description: |
| This file is writeable and can be used to set the assumed |
| battery 'full level'. As batteries age, this value has to be |
| amended over time. |
| |
| What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer |
| Date: October 2014 |
| KernelVersion: 3.18.0 |
| Contact: Krzysztof Kozlowski <krzk@kernel.org> |
| Description: |
| This entry shows and sets the maximum time the max14577 |
| charger operates in fast-charge mode. When the timer expires |
| the device will terminate fast-charge mode (charging current |
| will drop to 0 A) and will trigger interrupt. |
| |
| Valid values: |
| - 5, 6 or 7 (hours), |
| - 0: disabled. |
| |
| What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer |
| Date: January 2015 |
| KernelVersion: 3.19.0 |
| Contact: Krzysztof Kozlowski <krzk@kernel.org> |
| Description: |
| This entry shows and sets the maximum time the max77693 |
| charger operates in fast-charge mode. When the timer expires |
| the device will terminate fast-charge mode (charging current |
| will drop to 0 A) and will trigger interrupt. |
| |
| Valid values: |
| - 4 - 16 (hours), step by 2 (rounded down) |
| - 0: disabled. |
| |
| What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current |
| Date: January 2015 |
| KernelVersion: 3.19.0 |
| Contact: Krzysztof Kozlowski <krzk@kernel.org> |
| Description: |
| This entry shows and sets the charging current threshold for |
| entering top-off charging mode. When charging current in fast |
| charge mode drops below this value, the charger will trigger |
| interrupt and start top-off charging mode. |
| |
| Valid values: |
| - 100000 - 200000 (microamps), step by 25000 (rounded down) |
| - 200000 - 350000 (microamps), step by 50000 (rounded down) |
| - 0: disabled. |
| |
| What: /sys/class/power_supply/max77693-charger/device/top_off_timer |
| Date: January 2015 |
| KernelVersion: 3.19.0 |
| Contact: Krzysztof Kozlowski <krzk@kernel.org> |
| Description: |
| This entry shows and sets the maximum time the max77693 |
| charger operates in top-off charge mode. When the timer expires |
| the device will terminate top-off charge mode (charging current |
| will drop to 0 A) and will trigger interrupt. |
| |
| Valid values: |
| - 0 - 70 (minutes), step by 10 (rounded down) |
| |
| What: /sys/class/power_supply/bq24257-charger/ovp_voltage |
| Date: October 2015 |
| KernelVersion: 4.4.0 |
| Contact: Andreas Dannenberg <dannenberg@ti.com> |
| Description: |
| This entry configures the overvoltage protection feature of bq24257- |
| type charger devices. This feature protects the device and other |
| components against damage from overvoltage on the input supply. See |
| device datasheet for details. |
| |
| Valid values: |
| - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000, |
| 10500000 (all uV) |
| |
| What: /sys/class/power_supply/bq24257-charger/in_dpm_voltage |
| Date: October 2015 |
| KernelVersion: 4.4.0 |
| Contact: Andreas Dannenberg <dannenberg@ti.com> |
| Description: |
| This entry configures the input dynamic power path management voltage of |
| bq24257-type charger devices. Once the supply drops to the configured |
| voltage, the input current limit is reduced down to prevent the further |
| drop of the supply. When the IC enters this mode, the charge current is |
| lower than the set value. See device datasheet for details. |
| |
| Valid values: |
| - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000, |
| 4760000 (all uV) |
| |
| What: /sys/class/power_supply/bq24257-charger/high_impedance_enable |
| Date: October 2015 |
| KernelVersion: 4.4.0 |
| Contact: Andreas Dannenberg <dannenberg@ti.com> |
| Description: |
| This entry allows enabling the high-impedance mode of bq24257-type |
| charger devices. If enabled, it places the charger IC into low power |
| standby mode with the switch mode controller disabled. When disabled, |
| the charger operates normally. See device datasheet for details. |
| |
| Valid values: |
| - 1: enabled |
| - 0: disabled |
| |
| What: /sys/class/power_supply/bq24257-charger/sysoff_enable |
| Date: October 2015 |
| KernelVersion: 4.4.0 |
| Contact: Andreas Dannenberg <dannenberg@ti.com> |
| Description: |
| This entry allows enabling the sysoff mode of bq24257-type charger |
| devices. If enabled and the input is removed, the internal battery FET |
| is turned off in order to reduce the leakage from the BAT pin to less |
| than 1uA. Note that on some devices/systems this disconnects the battery |
| from the system. See device datasheet for details. |
| |
| Valid values: |
| - 1: enabled |
| - 0: disabled |
