| /* |
| * UniNorth AGPGART routines. |
| */ |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/pagemap.h> |
| #include <linux/agp_backend.h> |
| #include <linux/delay.h> |
| #include <linux/vmalloc.h> |
| #include <asm/uninorth.h> |
| #include <asm/prom.h> |
| #include <asm/pmac_feature.h> |
| #include "agp.h" |
| |
| /* |
| * NOTES for uninorth3 (G5 AGP) supports : |
| * |
| * There maybe also possibility to have bigger cache line size for |
| * agp (see pmac_pci.c and look for cache line). Need to be investigated |
| * by someone. |
| * |
| * PAGE size are hardcoded but this may change, see asm/page.h. |
| * |
| * Jerome Glisse <j.glisse@gmail.com> |
| */ |
| static int uninorth_rev; |
| static int is_u3; |
| static u32 scratch_value; |
| |
| #define DEFAULT_APERTURE_SIZE 256 |
| #define DEFAULT_APERTURE_STRING "256" |
| static char *aperture = NULL; |
| |
| static int uninorth_fetch_size(void) |
| { |
| int i, size = 0; |
| struct aper_size_info_32 *values = |
| A_SIZE_32(agp_bridge->driver->aperture_sizes); |
| |
| if (aperture) { |
| char *save = aperture; |
| |
| size = memparse(aperture, &aperture) >> 20; |
| aperture = save; |
| |
| for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) |
| if (size == values[i].size) |
| break; |
| |
| if (i == agp_bridge->driver->num_aperture_sizes) { |
| dev_err(&agp_bridge->dev->dev, "invalid aperture size, " |
| "using default\n"); |
| size = 0; |
| aperture = NULL; |
| } |
| } |
| |
| if (!size) { |
| for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) |
| if (values[i].size == DEFAULT_APERTURE_SIZE) |
| break; |
| } |
| |
| agp_bridge->previous_size = |
| agp_bridge->current_size = (void *)(values + i); |
| agp_bridge->aperture_size_idx = i; |
| return values[i].size; |
| } |
| |
| static void uninorth_tlbflush(struct agp_memory *mem) |
| { |
| u32 ctrl = UNI_N_CFG_GART_ENABLE; |
| |
| if (is_u3) |
| ctrl |= U3_N_CFG_GART_PERFRD; |
| pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, |
| ctrl | UNI_N_CFG_GART_INVAL); |
| pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, ctrl); |
| |
| if (!mem && uninorth_rev <= 0x30) { |
| pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, |
| ctrl | UNI_N_CFG_GART_2xRESET); |
| pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, |
| ctrl); |
| } |
| } |
| |
| static void uninorth_cleanup(void) |
| { |
| u32 tmp; |
| |
| pci_read_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, &tmp); |
| if (!(tmp & UNI_N_CFG_GART_ENABLE)) |
| return; |
| tmp |= UNI_N_CFG_GART_INVAL; |
| pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, tmp); |
| pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, 0); |
| |
| if (uninorth_rev <= 0x30) { |
| pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, |
| UNI_N_CFG_GART_2xRESET); |
| pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, |
| 0); |
| } |
| } |
| |
| static int uninorth_configure(void) |
| { |
| struct aper_size_info_32 *current_size; |
| |
| current_size = A_SIZE_32(agp_bridge->current_size); |
| |
| dev_info(&agp_bridge->dev->dev, "configuring for size idx: %d\n", |
| current_size->size_value); |
| |
| /* aperture size and gatt addr */ |
| pci_write_config_dword(agp_bridge->dev, |
| UNI_N_CFG_GART_BASE, |
| (agp_bridge->gatt_bus_addr & 0xfffff000) |
| | current_size->size_value); |
| |
| /* HACK ALERT |
| * UniNorth seem to be buggy enough not to handle properly when |
| * the AGP aperture isn't mapped at bus physical address 0 |
| */ |
| agp_bridge->gart_bus_addr = 0; |
| #ifdef CONFIG_PPC64 |
| /* Assume U3 or later on PPC64 systems */ |
| /* high 4 bits of GART physical address go in UNI_N_CFG_AGP_BASE */ |
| pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_AGP_BASE, |
| (agp_bridge->gatt_bus_addr >> 32) & 0xf); |
| #else |
| pci_write_config_dword(agp_bridge->dev, |
| UNI_N_CFG_AGP_BASE, agp_bridge->gart_bus_addr); |
| #endif |
| |
| if (is_u3) { |
| pci_write_config_dword(agp_bridge->dev, |
| UNI_N_CFG_GART_DUMMY_PAGE, |
| page_to_phys(agp_bridge->scratch_page_page) >> 12); |
| } |
| |
| return 0; |
| } |
| |
| static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start, int type) |
| { |
| int i, num_entries; |
| void *temp; |
| u32 *gp; |
| int mask_type; |
| |
| if (type != mem->type) |
| return -EINVAL; |
| |
| mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type); |
| if (mask_type != 0) { |
| /* We know nothing of memory types */ |
| return -EINVAL; |
| } |
| |
| if (mem->page_count == 0) |
| return 0; |
| |
| temp = agp_bridge->current_size; |
| num_entries = A_SIZE_32(temp)->num_entries; |
| |
| if ((pg_start + mem->page_count) > num_entries) |
| return -EINVAL; |
| |
| gp = (u32 *) &agp_bridge->gatt_table[pg_start]; |
| for (i = 0; i < mem->page_count; ++i) { |
| if (gp[i] != scratch_value) { |
| dev_info(&agp_bridge->dev->dev, |
| "uninorth_insert_memory: entry 0x%x occupied (%x)\n", |
| i, gp[i]); |
| return -EBUSY; |
| } |
| } |
| |
| for (i = 0; i < mem->page_count; i++) { |
| if (is_u3) |
| gp[i] = (page_to_phys(mem->pages[i]) >> PAGE_SHIFT) | 0x80000000UL; |
| else |
| gp[i] = cpu_to_le32((page_to_phys(mem->pages[i]) & 0xFFFFF000UL) | |
| 0x1UL); |
| flush_dcache_range((unsigned long)__va(page_to_phys(mem->pages[i])), |
| (unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000); |
| } |
| mb(); |
| uninorth_tlbflush(mem); |
| |
| return 0; |
| } |
| |
| int uninorth_remove_memory(struct agp_memory *mem, off_t pg_start, int type) |
| { |
| size_t i; |
| u32 *gp; |
| int mask_type; |
| |
| if (type != mem->type) |
| return -EINVAL; |
| |
| mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type); |
| if (mask_type != 0) { |
| /* We know nothing of memory types */ |
| return -EINVAL; |
| } |
| |
| if (mem->page_count == 0) |
| return 0; |
| |
| gp = (u32 *) &agp_bridge->gatt_table[pg_start]; |
| for (i = 0; i < mem->page_count; ++i) { |
| gp[i] = scratch_value; |
| } |
| mb(); |
| uninorth_tlbflush(mem); |
| |
| return 0; |
| } |
| |
| static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode) |
| { |
| u32 command, scratch, status; |
| int timeout; |
| |
| pci_read_config_dword(bridge->dev, |
| bridge->capndx + PCI_AGP_STATUS, |
| &status); |
| |
| command = agp_collect_device_status(bridge, mode, status); |
| command |= PCI_AGP_COMMAND_AGP; |
| |
| if (uninorth_rev == 0x21) { |
| /* |
| * Darwin disable AGP 4x on this revision, thus we |
| * may assume it's broken. This is an AGP2 controller. |
| */ |
| command &= ~AGPSTAT2_4X; |
| } |
| |
| if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) { |
| /* |
| * We need to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1, |
| * 2.2 and 2.3, Darwin do so. |
| */ |
| if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7) |
| command = (command & ~AGPSTAT_RQ_DEPTH) |
| | (7 << AGPSTAT_RQ_DEPTH_SHIFT); |
| } |
| |
| uninorth_tlbflush(NULL); |
| |
| timeout = 0; |
| do { |
| pci_write_config_dword(bridge->dev, |
| bridge->capndx + PCI_AGP_COMMAND, |
| command); |
| pci_read_config_dword(bridge->dev, |
| bridge->capndx + PCI_AGP_COMMAND, |
| &scratch); |
| } while ((scratch & PCI_AGP_COMMAND_AGP) == 0 && ++timeout < 1000); |
| if ((scratch & PCI_AGP_COMMAND_AGP) == 0) |
| dev_err(&bridge->dev->dev, "can't write UniNorth AGP " |
| "command register\n"); |
| |
| if (uninorth_rev >= 0x30) { |
| /* This is an AGP V3 */ |
| agp_device_command(command, (status & AGPSTAT_MODE_3_0) != 0); |
| } else { |
| /* AGP V2 */ |
| agp_device_command(command, false); |
| } |
| |
| uninorth_tlbflush(NULL); |
| } |
| |
| #ifdef CONFIG_PM |
| /* |
| * These Power Management routines are _not_ called by the normal PCI PM layer, |
| * but directly by the video driver through function pointers in the device |
| * tree. |
| */ |
| static int agp_uninorth_suspend(struct pci_dev *pdev) |
| { |
| struct agp_bridge_data *bridge; |
| u32 cmd; |
| u8 agp; |
| struct pci_dev *device = NULL; |
| |
| bridge = agp_find_bridge(pdev); |
| if (bridge == NULL) |
| return -ENODEV; |
| |
| /* Only one suspend supported */ |
| if (bridge->dev_private_data) |
| return 0; |
| |
| /* turn off AGP on the video chip, if it was enabled */ |
| for_each_pci_dev(device) { |
| /* Don't touch the bridge yet, device first */ |
| if (device == pdev) |
| continue; |
| /* Only deal with devices on the same bus here, no Mac has a P2P |
| * bridge on the AGP port, and mucking around the entire PCI |
| * tree is source of problems on some machines because of a bug |
| * in some versions of pci_find_capability() when hitting a dead |
| * device |
| */ |
| if (device->bus != pdev->bus) |
| continue; |
| agp = pci_find_capability(device, PCI_CAP_ID_AGP); |
| if (!agp) |
| continue; |
| pci_read_config_dword(device, agp + PCI_AGP_COMMAND, &cmd); |
| if (!(cmd & PCI_AGP_COMMAND_AGP)) |
| continue; |
| dev_info(&pdev->dev, "disabling AGP on device %s\n", |
| pci_name(device)); |
| cmd &= ~PCI_AGP_COMMAND_AGP; |
| pci_write_config_dword(device, agp + PCI_AGP_COMMAND, cmd); |
| } |
| |
| /* turn off AGP on the bridge */ |
| agp = pci_find_capability(pdev, PCI_CAP_ID_AGP); |
| pci_read_config_dword(pdev, agp + PCI_AGP_COMMAND, &cmd); |
| bridge->dev_private_data = (void *)(long)cmd; |
| if (cmd & PCI_AGP_COMMAND_AGP) { |
| dev_info(&pdev->dev, "disabling AGP on bridge\n"); |
| cmd &= ~PCI_AGP_COMMAND_AGP; |
| pci_write_config_dword(pdev, agp + PCI_AGP_COMMAND, cmd); |
| } |
| /* turn off the GART */ |
| uninorth_cleanup(); |
| |
| return 0; |
| } |
| |
| static int agp_uninorth_resume(struct pci_dev *pdev) |
| { |
| struct agp_bridge_data *bridge; |
| u32 command; |
| |
| bridge = agp_find_bridge(pdev); |
| if (bridge == NULL) |
| return -ENODEV; |
| |
| command = (long)bridge->dev_private_data; |
| bridge->dev_private_data = NULL; |
| if (!(command & PCI_AGP_COMMAND_AGP)) |
| return 0; |
| |
| uninorth_agp_enable(bridge, command); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static struct { |
| struct page **pages_arr; |
| } uninorth_priv; |
| |
| static int uninorth_create_gatt_table(struct agp_bridge_data *bridge) |
| { |
| char *table; |
| char *table_end; |
| int size; |
| int page_order; |
| int num_entries; |
| int i; |
| void *temp; |
| struct page *page; |
| |
| /* We can't handle 2 level gatt's */ |
| if (bridge->driver->size_type == LVL2_APER_SIZE) |
| return -EINVAL; |
| |
| table = NULL; |
| i = bridge->aperture_size_idx; |
| temp = bridge->current_size; |
| size = page_order = num_entries = 0; |
| |
| do { |
| size = A_SIZE_32(temp)->size; |
| page_order = A_SIZE_32(temp)->page_order; |
| num_entries = A_SIZE_32(temp)->num_entries; |
| |
| table = (char *) __get_free_pages(GFP_KERNEL, page_order); |
| |
| if (table == NULL) { |
| i++; |
| bridge->current_size = A_IDX32(bridge); |
| } else { |
| bridge->aperture_size_idx = i; |
| } |
| } while (!table && (i < bridge->driver->num_aperture_sizes)); |
| |
| if (table == NULL) |
| return -ENOMEM; |
| |
| uninorth_priv.pages_arr = kmalloc((1 << page_order) * sizeof(struct page*), GFP_KERNEL); |
| if (uninorth_priv.pages_arr == NULL) |
| goto enomem; |
| |
| table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1); |
| |
| for (page = virt_to_page(table), i = 0; page <= virt_to_page(table_end); |
| page++, i++) { |
| SetPageReserved(page); |
| uninorth_priv.pages_arr[i] = page; |
| } |
| |
| bridge->gatt_table_real = (u32 *) table; |
| /* Need to clear out any dirty data still sitting in caches */ |
| flush_dcache_range((unsigned long)table, |
| (unsigned long)table_end + 1); |
| bridge->gatt_table = vmap(uninorth_priv.pages_arr, (1 << page_order), 0, PAGE_KERNEL_NCG); |
| |
| if (bridge->gatt_table == NULL) |
| goto enomem; |
| |
| bridge->gatt_bus_addr = virt_to_phys(table); |
| |
| if (is_u3) |
| scratch_value = (page_to_phys(agp_bridge->scratch_page_page) >> PAGE_SHIFT) | 0x80000000UL; |
| else |
| scratch_value = cpu_to_le32((page_to_phys(agp_bridge->scratch_page_page) & 0xFFFFF000UL) | |
| 0x1UL); |
| for (i = 0; i < num_entries; i++) |
| bridge->gatt_table[i] = scratch_value; |
| |
| return 0; |
| |
| enomem: |
| kfree(uninorth_priv.pages_arr); |
| if (table) |
| free_pages((unsigned long)table, page_order); |
| return -ENOMEM; |
| } |
| |
| static int uninorth_free_gatt_table(struct agp_bridge_data *bridge) |
| { |
| int page_order; |
| char *table, *table_end; |
| void *temp; |
| struct page *page; |
| |
| temp = bridge->current_size; |
| page_order = A_SIZE_32(temp)->page_order; |
| |
| /* Do not worry about freeing memory, because if this is |
| * called, then all agp memory is deallocated and removed |
| * from the table. |
| */ |
| |
| vunmap(bridge->gatt_table); |
| kfree(uninorth_priv.pages_arr); |
| table = (char *) bridge->gatt_table_real; |
| table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1); |
| |
| for (page = virt_to_page(table); page <= virt_to_page(table_end); page++) |
| ClearPageReserved(page); |
| |
| free_pages((unsigned long) bridge->gatt_table_real, page_order); |
| |
| return 0; |
| } |
| |
| void null_cache_flush(void) |
| { |
| mb(); |
| } |
| |
| /* Setup function */ |
| |
| static const struct aper_size_info_32 uninorth_sizes[] = |
| { |
| {256, 65536, 6, 64}, |
| {128, 32768, 5, 32}, |
| {64, 16384, 4, 16}, |
| {32, 8192, 3, 8}, |
| {16, 4096, 2, 4}, |
| {8, 2048, 1, 2}, |
| {4, 1024, 0, 1} |
| }; |
| |
| /* |
| * Not sure that u3 supports that high aperture sizes but it |
| * would strange if it did not :) |
| */ |
| static const struct aper_size_info_32 u3_sizes[] = |
| { |
| {512, 131072, 7, 128}, |
| {256, 65536, 6, 64}, |
| {128, 32768, 5, 32}, |
| {64, 16384, 4, 16}, |
| {32, 8192, 3, 8}, |
| {16, 4096, 2, 4}, |
| {8, 2048, 1, 2}, |
| {4, 1024, 0, 1} |
| }; |
| |
| const struct agp_bridge_driver uninorth_agp_driver = { |
| .owner = THIS_MODULE, |
| .aperture_sizes = (void *)uninorth_sizes, |
| .size_type = U32_APER_SIZE, |
| .num_aperture_sizes = ARRAY_SIZE(uninorth_sizes), |
| .configure = uninorth_configure, |
| .fetch_size = uninorth_fetch_size, |
| .cleanup = uninorth_cleanup, |
| .tlb_flush = uninorth_tlbflush, |
| .mask_memory = agp_generic_mask_memory, |
| .masks = NULL, |
| .cache_flush = null_cache_flush, |
| .agp_enable = uninorth_agp_enable, |
| .create_gatt_table = uninorth_create_gatt_table, |
| .free_gatt_table = uninorth_free_gatt_table, |
| .insert_memory = uninorth_insert_memory, |
| .remove_memory = uninorth_remove_memory, |
| .alloc_by_type = agp_generic_alloc_by_type, |
| .free_by_type = agp_generic_free_by_type, |
| .agp_alloc_page = agp_generic_alloc_page, |
| .agp_alloc_pages = agp_generic_alloc_pages, |
| .agp_destroy_page = agp_generic_destroy_page, |
| .agp_destroy_pages = agp_generic_destroy_pages, |
| .agp_type_to_mask_type = agp_generic_type_to_mask_type, |
| .cant_use_aperture = true, |
| .needs_scratch_page = true, |
| }; |
| |
| const struct agp_bridge_driver u3_agp_driver = { |
| .owner = THIS_MODULE, |
| .aperture_sizes = (void *)u3_sizes, |
| .size_type = U32_APER_SIZE, |
| .num_aperture_sizes = ARRAY_SIZE(u3_sizes), |
| .configure = uninorth_configure, |
| .fetch_size = uninorth_fetch_size, |
| .cleanup = uninorth_cleanup, |
| .tlb_flush = uninorth_tlbflush, |
| .mask_memory = agp_generic_mask_memory, |
| .masks = NULL, |
| .cache_flush = null_cache_flush, |
| .agp_enable = uninorth_agp_enable, |
| .create_gatt_table = uninorth_create_gatt_table, |
| .free_gatt_table = uninorth_free_gatt_table, |
| .insert_memory = uninorth_insert_memory, |
| .remove_memory = uninorth_remove_memory, |
| .alloc_by_type = agp_generic_alloc_by_type, |
| .free_by_type = agp_generic_free_by_type, |
| .agp_alloc_page = agp_generic_alloc_page, |
| .agp_alloc_pages = agp_generic_alloc_pages, |
| .agp_destroy_page = agp_generic_destroy_page, |
| .agp_destroy_pages = agp_generic_destroy_pages, |
| .agp_type_to_mask_type = agp_generic_type_to_mask_type, |
| .cant_use_aperture = true, |
| .needs_scratch_page = true, |
| }; |
| |
| static struct agp_device_ids uninorth_agp_device_ids[] = { |
| { |
| .device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP, |
| .chipset_name = "UniNorth", |
| }, |
| { |
| .device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP_P, |
| .chipset_name = "UniNorth/Pangea", |
| }, |
| { |
| .device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP15, |
| .chipset_name = "UniNorth 1.5", |
| }, |
| { |
| .device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP2, |
| .chipset_name = "UniNorth 2", |
| }, |
| { |
| .device_id = PCI_DEVICE_ID_APPLE_U3_AGP, |
| .chipset_name = "U3", |
| }, |
| { |
| .device_id = PCI_DEVICE_ID_APPLE_U3L_AGP, |
| .chipset_name = "U3L", |
| }, |
| { |
| .device_id = PCI_DEVICE_ID_APPLE_U3H_AGP, |
| .chipset_name = "U3H", |
| }, |
| { |
| .device_id = PCI_DEVICE_ID_APPLE_IPID2_AGP, |
| .chipset_name = "UniNorth/Intrepid2", |
| }, |
| }; |
| |
| static int agp_uninorth_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct agp_device_ids *devs = uninorth_agp_device_ids; |
| struct agp_bridge_data *bridge; |
| struct device_node *uninorth_node; |
| u8 cap_ptr; |
| int j; |
| |
| cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP); |
| if (cap_ptr == 0) |
| return -ENODEV; |
| |
| /* probe for known chipsets */ |
| for (j = 0; devs[j].chipset_name != NULL; ++j) { |
| if (pdev->device == devs[j].device_id) { |
| dev_info(&pdev->dev, "Apple %s chipset\n", |
| devs[j].chipset_name); |
| goto found; |
| } |
| } |
| |
| dev_err(&pdev->dev, "unsupported Apple chipset [%04x/%04x]\n", |
| pdev->vendor, pdev->device); |
| return -ENODEV; |
| |
| found: |
| /* Set revision to 0 if we could not read it. */ |
| uninorth_rev = 0; |
| is_u3 = 0; |
| /* Locate core99 Uni-N */ |
| uninorth_node = of_find_node_by_name(NULL, "uni-n"); |
| /* Locate G5 u3 */ |
| if (uninorth_node == NULL) { |
| is_u3 = 1; |
| uninorth_node = of_find_node_by_name(NULL, "u3"); |
| } |
| if (uninorth_node) { |
| const int *revprop = of_get_property(uninorth_node, |
| "device-rev", NULL); |
| if (revprop != NULL) |
| uninorth_rev = *revprop & 0x3f; |
| of_node_put(uninorth_node); |
| } |
| |
| #ifdef CONFIG_PM |
| /* Inform platform of our suspend/resume caps */ |
| pmac_register_agp_pm(pdev, agp_uninorth_suspend, agp_uninorth_resume); |
| #endif |
| |
| /* Allocate & setup our driver */ |
| bridge = agp_alloc_bridge(); |
| if (!bridge) |
| return -ENOMEM; |
| |
| if (is_u3) |
| bridge->driver = &u3_agp_driver; |
| else |
| bridge->driver = &uninorth_agp_driver; |
| |
| bridge->dev = pdev; |
| bridge->capndx = cap_ptr; |
| bridge->flags = AGP_ERRATA_FASTWRITES; |
| |
| /* Fill in the mode register */ |
| pci_read_config_dword(pdev, cap_ptr+PCI_AGP_STATUS, &bridge->mode); |
| |
| pci_set_drvdata(pdev, bridge); |
| return agp_add_bridge(bridge); |
| } |
| |
| static void agp_uninorth_remove(struct pci_dev *pdev) |
| { |
| struct agp_bridge_data *bridge = pci_get_drvdata(pdev); |
| |
| #ifdef CONFIG_PM |
| /* Inform platform of our suspend/resume caps */ |
| pmac_register_agp_pm(pdev, NULL, NULL); |
| #endif |
| |
| agp_remove_bridge(bridge); |
| agp_put_bridge(bridge); |
| } |
| |
| static struct pci_device_id agp_uninorth_pci_table[] = { |
| { |
| .class = (PCI_CLASS_BRIDGE_HOST << 8), |
| .class_mask = ~0, |
| .vendor = PCI_VENDOR_ID_APPLE, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, agp_uninorth_pci_table); |
| |
| static struct pci_driver agp_uninorth_pci_driver = { |
| .name = "agpgart-uninorth", |
| .id_table = agp_uninorth_pci_table, |
| .probe = agp_uninorth_probe, |
| .remove = agp_uninorth_remove, |
| }; |
| |
| static int __init agp_uninorth_init(void) |
| { |
| if (agp_off) |
| return -EINVAL; |
| return pci_register_driver(&agp_uninorth_pci_driver); |
| } |
| |
| static void __exit agp_uninorth_cleanup(void) |
| { |
| pci_unregister_driver(&agp_uninorth_pci_driver); |
| } |
| |
| module_init(agp_uninorth_init); |
| module_exit(agp_uninorth_cleanup); |
| |
| module_param(aperture, charp, 0); |
| MODULE_PARM_DESC(aperture, |
| "Aperture size, must be power of two between 4MB and an\n" |
| "\t\tupper limit specific to the UniNorth revision.\n" |
| "\t\tDefault: " DEFAULT_APERTURE_STRING "M"); |
| |
| MODULE_AUTHOR("Ben Herrenschmidt & Paul Mackerras"); |
| MODULE_LICENSE("GPL"); |