| /* Hisilicon Hibmc SoC drm driver |
| * |
| * Based on the bochs drm driver. |
| * |
| * Copyright (c) 2016 Huawei Limited. |
| * |
| * Author: |
| * Rongrong Zou <zourongrong@huawei.com> |
| * Rongrong Zou <zourongrong@gmail.com> |
| * Jianhua Li <lijianhua@huawei.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_plane_helper.h> |
| |
| #include "hibmc_drm_drv.h" |
| #include "hibmc_drm_regs.h" |
| |
| struct hibmc_display_panel_pll { |
| unsigned long M; |
| unsigned long N; |
| unsigned long OD; |
| unsigned long POD; |
| }; |
| |
| struct hibmc_dislay_pll_config { |
| unsigned long hdisplay; |
| unsigned long vdisplay; |
| u32 pll1_config_value; |
| u32 pll2_config_value; |
| }; |
| |
| static const struct hibmc_dislay_pll_config hibmc_pll_table[] = { |
| {800, 600, CRT_PLL1_HS_40MHZ, CRT_PLL2_HS_40MHZ}, |
| {1024, 768, CRT_PLL1_HS_65MHZ, CRT_PLL2_HS_65MHZ}, |
| {1152, 864, CRT_PLL1_HS_80MHZ_1152, CRT_PLL2_HS_80MHZ}, |
| {1280, 768, CRT_PLL1_HS_80MHZ, CRT_PLL2_HS_80MHZ}, |
| {1280, 720, CRT_PLL1_HS_74MHZ, CRT_PLL2_HS_74MHZ}, |
| {1280, 960, CRT_PLL1_HS_108MHZ, CRT_PLL2_HS_108MHZ}, |
| {1280, 1024, CRT_PLL1_HS_108MHZ, CRT_PLL2_HS_108MHZ}, |
| {1600, 1200, CRT_PLL1_HS_162MHZ, CRT_PLL2_HS_162MHZ}, |
| {1920, 1080, CRT_PLL1_HS_148MHZ, CRT_PLL2_HS_148MHZ}, |
| {1920, 1200, CRT_PLL1_HS_193MHZ, CRT_PLL2_HS_193MHZ}, |
| }; |
| |
| #define PADDING(align, data) (((data) + (align) - 1) & (~((align) - 1))) |
| |
| static int hibmc_plane_atomic_check(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct drm_framebuffer *fb = state->fb; |
| struct drm_crtc *crtc = state->crtc; |
| struct drm_crtc_state *crtc_state; |
| u32 src_w = state->src_w >> 16; |
| u32 src_h = state->src_h >> 16; |
| |
| if (!crtc || !fb) |
| return 0; |
| |
| crtc_state = drm_atomic_get_crtc_state(state->state, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| if (src_w != state->crtc_w || src_h != state->crtc_h) { |
| DRM_DEBUG_ATOMIC("scale not support\n"); |
| return -EINVAL; |
| } |
| |
| if (state->crtc_x < 0 || state->crtc_y < 0) { |
| DRM_DEBUG_ATOMIC("crtc_x/y of drm_plane state is invalid\n"); |
| return -EINVAL; |
| } |
| |
| if (state->crtc_x + state->crtc_w > |
| crtc_state->adjusted_mode.hdisplay || |
| state->crtc_y + state->crtc_h > |
| crtc_state->adjusted_mode.vdisplay) { |
| DRM_DEBUG_ATOMIC("visible portion of plane is invalid\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void hibmc_plane_atomic_update(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct drm_plane_state *state = plane->state; |
| u32 reg; |
| int ret; |
| u64 gpu_addr = 0; |
| unsigned int line_l; |
| struct hibmc_drm_private *priv = plane->dev->dev_private; |
| struct hibmc_framebuffer *hibmc_fb; |
| struct hibmc_bo *bo; |
| |
| if (!state->fb) |
| return; |
| |
| hibmc_fb = to_hibmc_framebuffer(state->fb); |
| bo = gem_to_hibmc_bo(hibmc_fb->obj); |
| ret = ttm_bo_reserve(&bo->bo, true, false, NULL); |
| if (ret) { |
| DRM_ERROR("failed to reserve ttm_bo: %d", ret); |
| return; |
| } |
| |
| ret = hibmc_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr); |
| ttm_bo_unreserve(&bo->bo); |
| if (ret) { |
| DRM_ERROR("failed to pin hibmc_bo: %d", ret); |
| return; |
| } |
| |
| writel(gpu_addr, priv->mmio + HIBMC_CRT_FB_ADDRESS); |
| |
| reg = state->fb->width * (state->fb->format->cpp[0]); |
| /* now line_pad is 16 */ |
| reg = PADDING(16, reg); |
| |
| line_l = state->fb->width * state->fb->format->cpp[0]; |
| line_l = PADDING(16, line_l); |
| writel(HIBMC_FIELD(HIBMC_CRT_FB_WIDTH_WIDTH, reg) | |
| HIBMC_FIELD(HIBMC_CRT_FB_WIDTH_OFFS, line_l), |
| priv->mmio + HIBMC_CRT_FB_WIDTH); |
| |
| /* SET PIXEL FORMAT */ |
| reg = readl(priv->mmio + HIBMC_CRT_DISP_CTL); |
| reg &= ~HIBMC_CRT_DISP_CTL_FORMAT_MASK; |
| reg |= HIBMC_FIELD(HIBMC_CRT_DISP_CTL_FORMAT, |
| state->fb->format->cpp[0] * 8 / 16); |
| writel(reg, priv->mmio + HIBMC_CRT_DISP_CTL); |
| } |
| |
| static const u32 channel_formats1[] = { |
| DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, DRM_FORMAT_RGB888, |
| DRM_FORMAT_BGR888, DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_RGBA8888, DRM_FORMAT_BGRA8888, DRM_FORMAT_ARGB8888, |
| DRM_FORMAT_ABGR8888 |
| }; |
| |
| static struct drm_plane_funcs hibmc_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .set_property = drm_atomic_helper_plane_set_property, |
| .destroy = drm_plane_cleanup, |
| .reset = drm_atomic_helper_plane_reset, |
| .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, |
| }; |
| |
| static const struct drm_plane_helper_funcs hibmc_plane_helper_funcs = { |
| .atomic_check = hibmc_plane_atomic_check, |
| .atomic_update = hibmc_plane_atomic_update, |
| }; |
| |
| static struct drm_plane *hibmc_plane_init(struct hibmc_drm_private *priv) |
| { |
| struct drm_device *dev = priv->dev; |
| struct drm_plane *plane; |
| int ret = 0; |
| |
| plane = devm_kzalloc(dev->dev, sizeof(*plane), GFP_KERNEL); |
| if (!plane) { |
| DRM_ERROR("failed to alloc memory when init plane\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| /* |
| * plane init |
| * TODO: Now only support primary plane, overlay planes |
| * need to do. |
| */ |
| ret = drm_universal_plane_init(dev, plane, 1, &hibmc_plane_funcs, |
| channel_formats1, |
| ARRAY_SIZE(channel_formats1), |
| DRM_PLANE_TYPE_PRIMARY, |
| NULL); |
| if (ret) { |
| DRM_ERROR("failed to init plane: %d\n", ret); |
| return ERR_PTR(ret); |
| } |
| |
| drm_plane_helper_add(plane, &hibmc_plane_helper_funcs); |
| return plane; |
| } |
| |
| static void hibmc_crtc_enable(struct drm_crtc *crtc) |
| { |
| unsigned int reg; |
| struct hibmc_drm_private *priv = crtc->dev->dev_private; |
| |
| hibmc_set_power_mode(priv, HIBMC_PW_MODE_CTL_MODE_MODE0); |
| |
| /* Enable display power gate & LOCALMEM power gate*/ |
| reg = readl(priv->mmio + HIBMC_CURRENT_GATE); |
| reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK; |
| reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK; |
| reg |= HIBMC_CURR_GATE_LOCALMEM(1); |
| reg |= HIBMC_CURR_GATE_DISPLAY(1); |
| hibmc_set_current_gate(priv, reg); |
| drm_crtc_vblank_on(crtc); |
| } |
| |
| static void hibmc_crtc_disable(struct drm_crtc *crtc) |
| { |
| unsigned int reg; |
| struct hibmc_drm_private *priv = crtc->dev->dev_private; |
| |
| drm_crtc_vblank_off(crtc); |
| |
| hibmc_set_power_mode(priv, HIBMC_PW_MODE_CTL_MODE_SLEEP); |
| |
| /* Enable display power gate & LOCALMEM power gate*/ |
| reg = readl(priv->mmio + HIBMC_CURRENT_GATE); |
| reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK; |
| reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK; |
| reg |= HIBMC_CURR_GATE_LOCALMEM(0); |
| reg |= HIBMC_CURR_GATE_DISPLAY(0); |
| hibmc_set_current_gate(priv, reg); |
| } |
| |
| static unsigned int format_pll_reg(void) |
| { |
| unsigned int pllreg = 0; |
| struct hibmc_display_panel_pll pll = {0}; |
| |
| /* |
| * Note that all PLL's have the same format. Here, |
| * we just use Panel PLL parameter to work out the bit |
| * fields in the register.On returning a 32 bit number, the value can |
| * be applied to any PLL in the calling function. |
| */ |
| pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_BYPASS, 0); |
| pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_POWER, 1); |
| pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_INPUT, 0); |
| pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_POD, pll.POD); |
| pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_OD, pll.OD); |
| pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_N, pll.N); |
| pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_M, pll.M); |
| |
| return pllreg; |
| } |
| |
| static void set_vclock_hisilicon(struct drm_device *dev, unsigned long pll) |
| { |
| u32 val; |
| struct hibmc_drm_private *priv = dev->dev_private; |
| |
| val = readl(priv->mmio + CRT_PLL1_HS); |
| val &= ~(CRT_PLL1_HS_OUTER_BYPASS(1)); |
| writel(val, priv->mmio + CRT_PLL1_HS); |
| |
| val = CRT_PLL1_HS_INTER_BYPASS(1) | CRT_PLL1_HS_POWERON(1); |
| writel(val, priv->mmio + CRT_PLL1_HS); |
| |
| writel(pll, priv->mmio + CRT_PLL1_HS); |
| |
| usleep_range(1000, 2000); |
| |
| val = pll & ~(CRT_PLL1_HS_POWERON(1)); |
| writel(val, priv->mmio + CRT_PLL1_HS); |
| |
| usleep_range(1000, 2000); |
| |
| val &= ~(CRT_PLL1_HS_INTER_BYPASS(1)); |
| writel(val, priv->mmio + CRT_PLL1_HS); |
| |
| usleep_range(1000, 2000); |
| |
| val |= CRT_PLL1_HS_OUTER_BYPASS(1); |
| writel(val, priv->mmio + CRT_PLL1_HS); |
| } |
| |
| static void get_pll_config(unsigned long x, unsigned long y, |
| u32 *pll1, u32 *pll2) |
| { |
| int i; |
| int count = ARRAY_SIZE(hibmc_pll_table); |
| |
| for (i = 0; i < count; i++) { |
| if (hibmc_pll_table[i].hdisplay == x && |
| hibmc_pll_table[i].vdisplay == y) { |
| *pll1 = hibmc_pll_table[i].pll1_config_value; |
| *pll2 = hibmc_pll_table[i].pll2_config_value; |
| return; |
| } |
| } |
| |
| /* if found none, we use default value */ |
| *pll1 = CRT_PLL1_HS_25MHZ; |
| *pll2 = CRT_PLL2_HS_25MHZ; |
| } |
| |
| /* |
| * This function takes care the extra registers and bit fields required to |
| * setup a mode in board. |
| * Explanation about Display Control register: |
| * FPGA only supports 7 predefined pixel clocks, and clock select is |
| * in bit 4:0 of new register 0x802a8. |
| */ |
| static unsigned int display_ctrl_adjust(struct drm_device *dev, |
| struct drm_display_mode *mode, |
| unsigned int ctrl) |
| { |
| unsigned long x, y; |
| u32 pll1; /* bit[31:0] of PLL */ |
| u32 pll2; /* bit[63:32] of PLL */ |
| struct hibmc_drm_private *priv = dev->dev_private; |
| |
| x = mode->hdisplay; |
| y = mode->vdisplay; |
| |
| get_pll_config(x, y, &pll1, &pll2); |
| writel(pll2, priv->mmio + CRT_PLL2_HS); |
| set_vclock_hisilicon(dev, pll1); |
| |
| /* |
| * Hisilicon has to set up the top-left and bottom-right |
| * registers as well. |
| * Note that normal chip only use those two register for |
| * auto-centering mode. |
| */ |
| writel(HIBMC_FIELD(HIBMC_CRT_AUTO_CENTERING_TL_TOP, 0) | |
| HIBMC_FIELD(HIBMC_CRT_AUTO_CENTERING_TL_LEFT, 0), |
| priv->mmio + HIBMC_CRT_AUTO_CENTERING_TL); |
| |
| writel(HIBMC_FIELD(HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM, y - 1) | |
| HIBMC_FIELD(HIBMC_CRT_AUTO_CENTERING_BR_RIGHT, x - 1), |
| priv->mmio + HIBMC_CRT_AUTO_CENTERING_BR); |
| |
| /* |
| * Assume common fields in ctrl have been properly set before |
| * calling this function. |
| * This function only sets the extra fields in ctrl. |
| */ |
| |
| /* Set bit 25 of display controller: Select CRT or VGA clock */ |
| ctrl &= ~HIBMC_CRT_DISP_CTL_CRTSELECT_MASK; |
| ctrl &= ~HIBMC_CRT_DISP_CTL_CLOCK_PHASE_MASK; |
| |
| ctrl |= HIBMC_CRT_DISP_CTL_CRTSELECT(HIBMC_CRTSELECT_CRT); |
| |
| /* clock_phase_polarity is 0 */ |
| ctrl |= HIBMC_CRT_DISP_CTL_CLOCK_PHASE(0); |
| |
| writel(ctrl, priv->mmio + HIBMC_CRT_DISP_CTL); |
| |
| return ctrl; |
| } |
| |
| static void hibmc_crtc_mode_set_nofb(struct drm_crtc *crtc) |
| { |
| unsigned int val; |
| struct drm_display_mode *mode = &crtc->state->mode; |
| struct drm_device *dev = crtc->dev; |
| struct hibmc_drm_private *priv = dev->dev_private; |
| int width = mode->hsync_end - mode->hsync_start; |
| int height = mode->vsync_end - mode->vsync_start; |
| |
| writel(format_pll_reg(), priv->mmio + HIBMC_CRT_PLL_CTRL); |
| writel(HIBMC_FIELD(HIBMC_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) | |
| HIBMC_FIELD(HIBMC_CRT_HORZ_TOTAL_DISP_END, mode->hdisplay - 1), |
| priv->mmio + HIBMC_CRT_HORZ_TOTAL); |
| |
| writel(HIBMC_FIELD(HIBMC_CRT_HORZ_SYNC_WIDTH, width) | |
| HIBMC_FIELD(HIBMC_CRT_HORZ_SYNC_START, mode->hsync_start - 1), |
| priv->mmio + HIBMC_CRT_HORZ_SYNC); |
| |
| writel(HIBMC_FIELD(HIBMC_CRT_VERT_TOTAL_TOTAL, mode->vtotal - 1) | |
| HIBMC_FIELD(HIBMC_CRT_VERT_TOTAL_DISP_END, mode->vdisplay - 1), |
| priv->mmio + HIBMC_CRT_VERT_TOTAL); |
| |
| writel(HIBMC_FIELD(HIBMC_CRT_VERT_SYNC_HEIGHT, height) | |
| HIBMC_FIELD(HIBMC_CRT_VERT_SYNC_START, mode->vsync_start - 1), |
| priv->mmio + HIBMC_CRT_VERT_SYNC); |
| |
| val = HIBMC_FIELD(HIBMC_CRT_DISP_CTL_VSYNC_PHASE, 0); |
| val |= HIBMC_FIELD(HIBMC_CRT_DISP_CTL_HSYNC_PHASE, 0); |
| val |= HIBMC_CRT_DISP_CTL_TIMING(1); |
| val |= HIBMC_CRT_DISP_CTL_PLANE(1); |
| |
| display_ctrl_adjust(dev, mode, val); |
| } |
| |
| static void hibmc_crtc_atomic_begin(struct drm_crtc *crtc, |
| struct drm_crtc_state *old_state) |
| { |
| unsigned int reg; |
| struct drm_device *dev = crtc->dev; |
| struct hibmc_drm_private *priv = dev->dev_private; |
| |
| hibmc_set_power_mode(priv, HIBMC_PW_MODE_CTL_MODE_MODE0); |
| |
| /* Enable display power gate & LOCALMEM power gate*/ |
| reg = readl(priv->mmio + HIBMC_CURRENT_GATE); |
| reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK; |
| reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK; |
| reg |= HIBMC_CURR_GATE_DISPLAY(1); |
| reg |= HIBMC_CURR_GATE_LOCALMEM(1); |
| hibmc_set_current_gate(priv, reg); |
| |
| /* We can add more initialization as needed. */ |
| } |
| |
| static void hibmc_crtc_atomic_flush(struct drm_crtc *crtc, |
| struct drm_crtc_state *old_state) |
| |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&crtc->dev->event_lock, flags); |
| if (crtc->state->event) |
| drm_crtc_send_vblank_event(crtc, crtc->state->event); |
| crtc->state->event = NULL; |
| spin_unlock_irqrestore(&crtc->dev->event_lock, flags); |
| } |
| |
| static const struct drm_crtc_funcs hibmc_crtc_funcs = { |
| .page_flip = drm_atomic_helper_page_flip, |
| .set_config = drm_atomic_helper_set_config, |
| .destroy = drm_crtc_cleanup, |
| .reset = drm_atomic_helper_crtc_reset, |
| .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, |
| }; |
| |
| static const struct drm_crtc_helper_funcs hibmc_crtc_helper_funcs = { |
| .enable = hibmc_crtc_enable, |
| .disable = hibmc_crtc_disable, |
| .mode_set_nofb = hibmc_crtc_mode_set_nofb, |
| .atomic_begin = hibmc_crtc_atomic_begin, |
| .atomic_flush = hibmc_crtc_atomic_flush, |
| }; |
| |
| int hibmc_de_init(struct hibmc_drm_private *priv) |
| { |
| struct drm_device *dev = priv->dev; |
| struct drm_crtc *crtc; |
| struct drm_plane *plane; |
| int ret; |
| |
| plane = hibmc_plane_init(priv); |
| if (IS_ERR(plane)) { |
| DRM_ERROR("failed to create plane: %ld\n", PTR_ERR(plane)); |
| return PTR_ERR(plane); |
| } |
| |
| crtc = devm_kzalloc(dev->dev, sizeof(*crtc), GFP_KERNEL); |
| if (!crtc) { |
| DRM_ERROR("failed to alloc memory when init crtc\n"); |
| return -ENOMEM; |
| } |
| |
| ret = drm_crtc_init_with_planes(dev, crtc, plane, |
| NULL, &hibmc_crtc_funcs, NULL); |
| if (ret) { |
| DRM_ERROR("failed to init crtc: %d\n", ret); |
| return ret; |
| } |
| |
| ret = drm_mode_crtc_set_gamma_size(crtc, 256); |
| if (ret) { |
| DRM_ERROR("failed to set gamma size: %d\n", ret); |
| return ret; |
| } |
| drm_crtc_helper_add(crtc, &hibmc_crtc_helper_funcs); |
| |
| return 0; |
| } |