| /* |
| * Serial Attached SCSI (SAS) Expander discovery and configuration |
| * |
| * Copyright (C) 2007 James E.J. Bottomley |
| * <James.Bottomley@HansenPartnership.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 only. |
| */ |
| #include <linux/scatterlist.h> |
| #include <linux/blkdev.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| |
| #include "sas_internal.h" |
| |
| #include <scsi/scsi_transport.h> |
| #include <scsi/scsi_transport_sas.h> |
| #include "../scsi_sas_internal.h" |
| |
| static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data, |
| u8 phy_id) |
| { |
| struct sas_phy *phy; |
| struct sas_rphy *rphy; |
| |
| if (phy_id >= sas_ha->num_phys) { |
| resp_data[2] = SMP_RESP_NO_PHY; |
| return; |
| } |
| resp_data[2] = SMP_RESP_FUNC_ACC; |
| |
| phy = sas_ha->sas_phy[phy_id]->phy; |
| resp_data[9] = phy_id; |
| resp_data[13] = phy->negotiated_linkrate; |
| memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE); |
| memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr, |
| SAS_ADDR_SIZE); |
| resp_data[40] = (phy->minimum_linkrate << 4) | |
| phy->minimum_linkrate_hw; |
| resp_data[41] = (phy->maximum_linkrate << 4) | |
| phy->maximum_linkrate_hw; |
| |
| if (!sas_ha->sas_phy[phy_id]->port || |
| !sas_ha->sas_phy[phy_id]->port->port_dev) |
| return; |
| |
| rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy; |
| resp_data[12] = rphy->identify.device_type << 4; |
| resp_data[14] = rphy->identify.initiator_port_protocols; |
| resp_data[15] = rphy->identify.target_port_protocols; |
| } |
| |
| /** |
| * to_sas_gpio_gp_bit - given the gpio frame data find the byte/bit position of 'od' |
| * @od: od bit to find |
| * @data: incoming bitstream (from frame) |
| * @index: requested data register index (from frame) |
| * @count: total number of registers in the bitstream (from frame) |
| * @bit: bit position of 'od' in the returned byte |
| * |
| * returns NULL if 'od' is not in 'data' |
| * |
| * From SFF-8485 v0.7: |
| * "In GPIO_TX[1], bit 0 of byte 3 contains the first bit (i.e., OD0.0) |
| * and bit 7 of byte 0 contains the 32nd bit (i.e., OD10.1). |
| * |
| * In GPIO_TX[2], bit 0 of byte 3 contains the 33rd bit (i.e., OD10.2) |
| * and bit 7 of byte 0 contains the 64th bit (i.e., OD21.0)." |
| * |
| * The general-purpose (raw-bitstream) RX registers have the same layout |
| * although 'od' is renamed 'id' for 'input data'. |
| * |
| * SFF-8489 defines the behavior of the LEDs in response to the 'od' values. |
| */ |
| static u8 *to_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count, u8 *bit) |
| { |
| unsigned int reg; |
| u8 byte; |
| |
| /* gp registers start at index 1 */ |
| if (index == 0) |
| return NULL; |
| |
| index--; /* make index 0-based */ |
| if (od < index * 32) |
| return NULL; |
| |
| od -= index * 32; |
| reg = od >> 5; |
| |
| if (reg >= count) |
| return NULL; |
| |
| od &= (1 << 5) - 1; |
| byte = 3 - (od >> 3); |
| *bit = od & ((1 << 3) - 1); |
| |
| return &data[reg * 4 + byte]; |
| } |
| |
| int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count) |
| { |
| u8 *byte; |
| u8 bit; |
| |
| byte = to_sas_gpio_gp_bit(od, data, index, count, &bit); |
| if (!byte) |
| return -1; |
| |
| return (*byte >> bit) & 1; |
| } |
| EXPORT_SYMBOL(try_test_sas_gpio_gp_bit); |
| |
| static int sas_host_smp_write_gpio(struct sas_ha_struct *sas_ha, u8 *resp_data, |
| u8 reg_type, u8 reg_index, u8 reg_count, |
| u8 *req_data) |
| { |
| struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt); |
| int written; |
| |
| if (i->dft->lldd_write_gpio == NULL) { |
| resp_data[2] = SMP_RESP_FUNC_UNK; |
| return 0; |
| } |
| |
| written = i->dft->lldd_write_gpio(sas_ha, reg_type, reg_index, |
| reg_count, req_data); |
| |
| if (written < 0) { |
| resp_data[2] = SMP_RESP_FUNC_FAILED; |
| written = 0; |
| } else |
| resp_data[2] = SMP_RESP_FUNC_ACC; |
| |
| return written; |
| } |
| |
| static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data, |
| u8 phy_id) |
| { |
| struct sas_rphy *rphy; |
| struct dev_to_host_fis *fis; |
| int i; |
| |
| if (phy_id >= sas_ha->num_phys) { |
| resp_data[2] = SMP_RESP_NO_PHY; |
| return; |
| } |
| |
| resp_data[2] = SMP_RESP_PHY_NO_SATA; |
| |
| if (!sas_ha->sas_phy[phy_id]->port) |
| return; |
| |
| rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy; |
| fis = (struct dev_to_host_fis *) |
| sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd; |
| if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA) |
| return; |
| |
| resp_data[2] = SMP_RESP_FUNC_ACC; |
| resp_data[9] = phy_id; |
| memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr, |
| SAS_ADDR_SIZE); |
| |
| /* check to see if we have a valid d2h fis */ |
| if (fis->fis_type != 0x34) |
| return; |
| |
| /* the d2h fis is required by the standard to be in LE format */ |
| for (i = 0; i < 20; i += 4) { |
| u8 *dst = resp_data + 24 + i, *src = |
| &sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i]; |
| dst[0] = src[3]; |
| dst[1] = src[2]; |
| dst[2] = src[1]; |
| dst[3] = src[0]; |
| } |
| } |
| |
| static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id, |
| u8 phy_op, enum sas_linkrate min, |
| enum sas_linkrate max, u8 *resp_data) |
| { |
| struct sas_internal *i = |
| to_sas_internal(sas_ha->core.shost->transportt); |
| struct sas_phy_linkrates rates; |
| struct asd_sas_phy *asd_phy; |
| |
| if (phy_id >= sas_ha->num_phys) { |
| resp_data[2] = SMP_RESP_NO_PHY; |
| return; |
| } |
| |
| asd_phy = sas_ha->sas_phy[phy_id]; |
| switch (phy_op) { |
| case PHY_FUNC_NOP: |
| case PHY_FUNC_LINK_RESET: |
| case PHY_FUNC_HARD_RESET: |
| case PHY_FUNC_DISABLE: |
| case PHY_FUNC_CLEAR_ERROR_LOG: |
| case PHY_FUNC_CLEAR_AFFIL: |
| case PHY_FUNC_TX_SATA_PS_SIGNAL: |
| break; |
| |
| default: |
| resp_data[2] = SMP_RESP_PHY_UNK_OP; |
| return; |
| } |
| |
| rates.minimum_linkrate = min; |
| rates.maximum_linkrate = max; |
| |
| /* filter reset requests through libata eh */ |
| if (phy_op == PHY_FUNC_LINK_RESET && sas_try_ata_reset(asd_phy) == 0) { |
| resp_data[2] = SMP_RESP_FUNC_ACC; |
| return; |
| } |
| |
| if (i->dft->lldd_control_phy(asd_phy, phy_op, &rates)) |
| resp_data[2] = SMP_RESP_FUNC_FAILED; |
| else |
| resp_data[2] = SMP_RESP_FUNC_ACC; |
| } |
| |
| int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, |
| struct request *rsp) |
| { |
| u8 *req_data = NULL, *resp_data = NULL, *buf; |
| struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); |
| int error = -EINVAL; |
| |
| /* eight is the minimum size for request and response frames */ |
| if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8) |
| goto out; |
| |
| if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE || |
| bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) { |
| shost_printk(KERN_ERR, shost, |
| "SMP request/response frame crosses page boundary"); |
| goto out; |
| } |
| |
| req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL); |
| |
| /* make sure frame can always be built ... we copy |
| * back only the requested length */ |
| resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL); |
| |
| if (!req_data || !resp_data) { |
| error = -ENOMEM; |
| goto out; |
| } |
| |
| local_irq_disable(); |
| buf = kmap_atomic(bio_page(req->bio)); |
| memcpy(req_data, buf, blk_rq_bytes(req)); |
| kunmap_atomic(buf - bio_offset(req->bio)); |
| local_irq_enable(); |
| |
| if (req_data[0] != SMP_REQUEST) |
| goto out; |
| |
| /* always succeeds ... even if we can't process the request |
| * the result is in the response frame */ |
| error = 0; |
| |
| /* set up default don't know response */ |
| resp_data[0] = SMP_RESPONSE; |
| resp_data[1] = req_data[1]; |
| resp_data[2] = SMP_RESP_FUNC_UNK; |
| |
| switch (req_data[1]) { |
| case SMP_REPORT_GENERAL: |
| scsi_req(req)->resid_len -= 8; |
| scsi_req(rsp)->resid_len -= 32; |
| resp_data[2] = SMP_RESP_FUNC_ACC; |
| resp_data[9] = sas_ha->num_phys; |
| break; |
| |
| case SMP_REPORT_MANUF_INFO: |
| scsi_req(req)->resid_len -= 8; |
| scsi_req(rsp)->resid_len -= 64; |
| resp_data[2] = SMP_RESP_FUNC_ACC; |
| memcpy(resp_data + 12, shost->hostt->name, |
| SAS_EXPANDER_VENDOR_ID_LEN); |
| memcpy(resp_data + 20, "libsas virt phy", |
| SAS_EXPANDER_PRODUCT_ID_LEN); |
| break; |
| |
| case SMP_READ_GPIO_REG: |
| /* FIXME: need GPIO support in the transport class */ |
| break; |
| |
| case SMP_DISCOVER: |
| scsi_req(req)->resid_len -= 16; |
| if ((int)scsi_req(req)->resid_len < 0) { |
| scsi_req(req)->resid_len = 0; |
| error = -EINVAL; |
| goto out; |
| } |
| scsi_req(rsp)->resid_len -= 56; |
| sas_host_smp_discover(sas_ha, resp_data, req_data[9]); |
| break; |
| |
| case SMP_REPORT_PHY_ERR_LOG: |
| /* FIXME: could implement this with additional |
| * libsas callbacks providing the HW supports it */ |
| break; |
| |
| case SMP_REPORT_PHY_SATA: |
| scsi_req(req)->resid_len -= 16; |
| if ((int)scsi_req(req)->resid_len < 0) { |
| scsi_req(req)->resid_len = 0; |
| error = -EINVAL; |
| goto out; |
| } |
| scsi_req(rsp)->resid_len -= 60; |
| sas_report_phy_sata(sas_ha, resp_data, req_data[9]); |
| break; |
| |
| case SMP_REPORT_ROUTE_INFO: |
| /* Can't implement; hosts have no routes */ |
| break; |
| |
| case SMP_WRITE_GPIO_REG: { |
| /* SFF-8485 v0.7 */ |
| const int base_frame_size = 11; |
| int to_write = req_data[4]; |
| |
| if (blk_rq_bytes(req) < base_frame_size + to_write * 4 || |
| scsi_req(req)->resid_len < base_frame_size + to_write * 4) { |
| resp_data[2] = SMP_RESP_INV_FRM_LEN; |
| break; |
| } |
| |
| to_write = sas_host_smp_write_gpio(sas_ha, resp_data, req_data[2], |
| req_data[3], to_write, &req_data[8]); |
| scsi_req(req)->resid_len -= base_frame_size + to_write * 4; |
| scsi_req(rsp)->resid_len -= 8; |
| break; |
| } |
| |
| case SMP_CONF_ROUTE_INFO: |
| /* Can't implement; hosts have no routes */ |
| break; |
| |
| case SMP_PHY_CONTROL: |
| scsi_req(req)->resid_len -= 44; |
| if ((int)scsi_req(req)->resid_len < 0) { |
| scsi_req(req)->resid_len = 0; |
| error = -EINVAL; |
| goto out; |
| } |
| scsi_req(rsp)->resid_len -= 8; |
| sas_phy_control(sas_ha, req_data[9], req_data[10], |
| req_data[32] >> 4, req_data[33] >> 4, |
| resp_data); |
| break; |
| |
| case SMP_PHY_TEST_FUNCTION: |
| /* FIXME: should this be implemented? */ |
| break; |
| |
| default: |
| /* probably a 2.0 function */ |
| break; |
| } |
| |
| local_irq_disable(); |
| buf = kmap_atomic(bio_page(rsp->bio)); |
| memcpy(buf, resp_data, blk_rq_bytes(rsp)); |
| flush_kernel_dcache_page(bio_page(rsp->bio)); |
| kunmap_atomic(buf - bio_offset(rsp->bio)); |
| local_irq_enable(); |
| |
| out: |
| kfree(req_data); |
| kfree(resp_data); |
| return error; |
| } |