| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * sleep.c - ACPI sleep support. |
| * |
| * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> |
| * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com> |
| * Copyright (c) 2000-2003 Patrick Mochel |
| * Copyright (c) 2003 Open Source Development Lab |
| */ |
| |
| #define pr_fmt(fmt) "ACPI: PM: " fmt |
| |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/dmi.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/suspend.h> |
| #include <linux/reboot.h> |
| #include <linux/acpi.h> |
| #include <linux/module.h> |
| #include <linux/syscore_ops.h> |
| #include <asm/io.h> |
| #include <trace/events/power.h> |
| |
| #include "internal.h" |
| #include "sleep.h" |
| |
| /* |
| * Some HW-full platforms do not have _S5, so they may need |
| * to leverage efi power off for a shutdown. |
| */ |
| bool acpi_no_s5; |
| static u8 sleep_states[ACPI_S_STATE_COUNT]; |
| |
| static void acpi_sleep_tts_switch(u32 acpi_state) |
| { |
| acpi_status status; |
| |
| status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state); |
| if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { |
| /* |
| * OS can't evaluate the _TTS object correctly. Some warning |
| * message will be printed. But it won't break anything. |
| */ |
| pr_notice("Failure in evaluating _TTS object\n"); |
| } |
| } |
| |
| static int tts_notify_reboot(struct notifier_block *this, |
| unsigned long code, void *x) |
| { |
| acpi_sleep_tts_switch(ACPI_STATE_S5); |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block tts_notifier = { |
| .notifier_call = tts_notify_reboot, |
| .next = NULL, |
| .priority = 0, |
| }; |
| |
| static int acpi_sleep_prepare(u32 acpi_state) |
| { |
| #ifdef CONFIG_ACPI_SLEEP |
| unsigned long acpi_wakeup_address; |
| |
| /* do we have a wakeup address for S2 and S3? */ |
| if (acpi_state == ACPI_STATE_S3) { |
| acpi_wakeup_address = acpi_get_wakeup_address(); |
| if (!acpi_wakeup_address) |
| return -EFAULT; |
| acpi_set_waking_vector(acpi_wakeup_address); |
| |
| } |
| #endif |
| pr_info("Preparing to enter system sleep state S%d\n", acpi_state); |
| acpi_enable_wakeup_devices(acpi_state); |
| acpi_enter_sleep_state_prep(acpi_state); |
| return 0; |
| } |
| |
| bool acpi_sleep_state_supported(u8 sleep_state) |
| { |
| acpi_status status; |
| u8 type_a, type_b; |
| |
| status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b); |
| return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware |
| || (acpi_gbl_FADT.sleep_control.address |
| && acpi_gbl_FADT.sleep_status.address)); |
| } |
| |
| #ifdef CONFIG_ACPI_SLEEP |
| static u32 acpi_target_sleep_state = ACPI_STATE_S0; |
| |
| u32 acpi_target_system_state(void) |
| { |
| return acpi_target_sleep_state; |
| } |
| EXPORT_SYMBOL_GPL(acpi_target_system_state); |
| |
| static bool pwr_btn_event_pending; |
| |
| /* |
| * The ACPI specification wants us to save NVS memory regions during hibernation |
| * and to restore them during the subsequent resume. Windows does that also for |
| * suspend to RAM. However, it is known that this mechanism does not work on |
| * all machines, so we allow the user to disable it with the help of the |
| * 'acpi_sleep=nonvs' kernel command line option. |
| */ |
| static bool nvs_nosave; |
| |
| void __init acpi_nvs_nosave(void) |
| { |
| nvs_nosave = true; |
| } |
| |
| /* |
| * The ACPI specification wants us to save NVS memory regions during hibernation |
| * but says nothing about saving NVS during S3. Not all versions of Windows |
| * save NVS on S3 suspend either, and it is clear that not all systems need |
| * NVS to be saved at S3 time. To improve suspend/resume time, allow the |
| * user to disable saving NVS on S3 if their system does not require it, but |
| * continue to save/restore NVS for S4 as specified. |
| */ |
| static bool nvs_nosave_s3; |
| |
| void __init acpi_nvs_nosave_s3(void) |
| { |
| nvs_nosave_s3 = true; |
| } |
| |
| static int __init init_nvs_save_s3(const struct dmi_system_id *d) |
| { |
| nvs_nosave_s3 = false; |
| return 0; |
| } |
| |
| /* |
| * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the |
| * user to request that behavior by using the 'acpi_old_suspend_ordering' |
| * kernel command line option that causes the following variable to be set. |
| */ |
| static bool old_suspend_ordering; |
| |
| void __init acpi_old_suspend_ordering(void) |
| { |
| old_suspend_ordering = true; |
| } |
| |
| static int __init init_old_suspend_ordering(const struct dmi_system_id *d) |
| { |
| acpi_old_suspend_ordering(); |
| return 0; |
| } |
| |
| static int __init init_nvs_nosave(const struct dmi_system_id *d) |
| { |
| acpi_nvs_nosave(); |
| return 0; |
| } |
| |
| bool acpi_sleep_default_s3; |
| |
| static int __init init_default_s3(const struct dmi_system_id *d) |
| { |
| acpi_sleep_default_s3 = true; |
| return 0; |
| } |
| |
| static const struct dmi_system_id acpisleep_dmi_table[] __initconst = { |
| { |
| .callback = init_old_suspend_ordering, |
| .ident = "Abit KN9 (nForce4 variant)", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"), |
| DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"), |
| }, |
| }, |
| { |
| .callback = init_old_suspend_ordering, |
| .ident = "HP xw4600 Workstation", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), |
| }, |
| }, |
| { |
| .callback = init_old_suspend_ordering, |
| .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."), |
| DMI_MATCH(DMI_BOARD_NAME, "M2N8L"), |
| }, |
| }, |
| { |
| .callback = init_old_suspend_ordering, |
| .ident = "Panasonic CF51-2L", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, |
| "Matsushita Electric Industrial Co.,Ltd."), |
| DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VGN-FW41E_H", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VGN-FW21E", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VGN-FW21M", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VPCEB17FX", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VGN-SR11M", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Everex StepNote Series", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VPCEB1Z1E", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VGN-NW130D", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VPCCW29FX", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Averatec AV1020-ED2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"), |
| }, |
| }, |
| { |
| .callback = init_old_suspend_ordering, |
| .ident = "Asus A8N-SLI DELUXE", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), |
| DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"), |
| }, |
| }, |
| { |
| .callback = init_old_suspend_ordering, |
| .ident = "Asus A8N-SLI Premium", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), |
| DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VGN-SR26GN_P", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VPCEB1S1E", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Sony Vaio VGN-FW520F", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Asus K54C", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "K54C"), |
| }, |
| }, |
| { |
| .callback = init_nvs_nosave, |
| .ident = "Asus K54HR", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"), |
| }, |
| }, |
| { |
| .callback = init_nvs_save_s3, |
| .ident = "Asus 1025C", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "1025C"), |
| }, |
| }, |
| /* |
| * https://bugzilla.kernel.org/show_bug.cgi?id=189431 |
| * Lenovo G50-45 is a platform later than 2012, but needs nvs memory |
| * saving during S3. |
| */ |
| { |
| .callback = init_nvs_save_s3, |
| .ident = "Lenovo G50-45", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "80E3"), |
| }, |
| }, |
| /* |
| * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using |
| * the Low Power S0 Idle firmware interface (see |
| * https://bugzilla.kernel.org/show_bug.cgi?id=199057). |
| */ |
| { |
| .callback = init_default_s3, |
| .ident = "ThinkPad X1 Tablet(2016)", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"), |
| }, |
| }, |
| {}, |
| }; |
| |
| static bool ignore_blacklist; |
| |
| void __init acpi_sleep_no_blacklist(void) |
| { |
| ignore_blacklist = true; |
| } |
| |
| static void __init acpi_sleep_dmi_check(void) |
| { |
| if (ignore_blacklist) |
| return; |
| |
| if (dmi_get_bios_year() >= 2012) |
| acpi_nvs_nosave_s3(); |
| |
| dmi_check_system(acpisleep_dmi_table); |
| } |
| |
| /** |
| * acpi_pm_freeze - Disable the GPEs and suspend EC transactions. |
| */ |
| static int acpi_pm_freeze(void) |
| { |
| acpi_disable_all_gpes(); |
| acpi_os_wait_events_complete(); |
| acpi_ec_block_transactions(); |
| return 0; |
| } |
| |
| /** |
| * acpi_pm_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS. |
| */ |
| static int acpi_pm_pre_suspend(void) |
| { |
| acpi_pm_freeze(); |
| return suspend_nvs_save(); |
| } |
| |
| /** |
| * __acpi_pm_prepare - Prepare the platform to enter the target state. |
| * |
| * If necessary, set the firmware waking vector and do arch-specific |
| * nastiness to get the wakeup code to the waking vector. |
| */ |
| static int __acpi_pm_prepare(void) |
| { |
| int error = acpi_sleep_prepare(acpi_target_sleep_state); |
| if (error) |
| acpi_target_sleep_state = ACPI_STATE_S0; |
| |
| return error; |
| } |
| |
| /** |
| * acpi_pm_prepare - Prepare the platform to enter the target sleep |
| * state and disable the GPEs. |
| */ |
| static int acpi_pm_prepare(void) |
| { |
| int error = __acpi_pm_prepare(); |
| if (!error) |
| error = acpi_pm_pre_suspend(); |
| |
| return error; |
| } |
| |
| /** |
| * acpi_pm_finish - Instruct the platform to leave a sleep state. |
| * |
| * This is called after we wake back up (or if entering the sleep state |
| * failed). |
| */ |
| static void acpi_pm_finish(void) |
| { |
| struct acpi_device *pwr_btn_adev; |
| u32 acpi_state = acpi_target_sleep_state; |
| |
| acpi_ec_unblock_transactions(); |
| suspend_nvs_free(); |
| |
| if (acpi_state == ACPI_STATE_S0) |
| return; |
| |
| pr_info("Waking up from system sleep state S%d\n", acpi_state); |
| acpi_disable_wakeup_devices(acpi_state); |
| acpi_leave_sleep_state(acpi_state); |
| |
| /* reset firmware waking vector */ |
| acpi_set_waking_vector(0); |
| |
| acpi_target_sleep_state = ACPI_STATE_S0; |
| |
| acpi_resume_power_resources(); |
| |
| /* If we were woken with the fixed power button, provide a small |
| * hint to userspace in the form of a wakeup event on the fixed power |
| * button device (if it can be found). |
| * |
| * We delay the event generation til now, as the PM layer requires |
| * timekeeping to be running before we generate events. */ |
| if (!pwr_btn_event_pending) |
| return; |
| |
| pwr_btn_event_pending = false; |
| pwr_btn_adev = acpi_dev_get_first_match_dev(ACPI_BUTTON_HID_POWERF, |
| NULL, -1); |
| if (pwr_btn_adev) { |
| pm_wakeup_event(&pwr_btn_adev->dev, 0); |
| acpi_dev_put(pwr_btn_adev); |
| } |
| } |
| |
| /** |
| * acpi_pm_start - Start system PM transition. |
| */ |
| static void acpi_pm_start(u32 acpi_state) |
| { |
| acpi_target_sleep_state = acpi_state; |
| acpi_sleep_tts_switch(acpi_target_sleep_state); |
| acpi_scan_lock_acquire(); |
| } |
| |
| /** |
| * acpi_pm_end - Finish up system PM transition. |
| */ |
| static void acpi_pm_end(void) |
| { |
| acpi_turn_off_unused_power_resources(); |
| acpi_scan_lock_release(); |
| /* |
| * This is necessary in case acpi_pm_finish() is not called during a |
| * failing transition to a sleep state. |
| */ |
| acpi_target_sleep_state = ACPI_STATE_S0; |
| acpi_sleep_tts_switch(acpi_target_sleep_state); |
| } |
| #else /* !CONFIG_ACPI_SLEEP */ |
| #define sleep_no_lps0 (1) |
| #define acpi_target_sleep_state ACPI_STATE_S0 |
| #define acpi_sleep_default_s3 (1) |
| static inline void acpi_sleep_dmi_check(void) {} |
| #endif /* CONFIG_ACPI_SLEEP */ |
| |
| #ifdef CONFIG_SUSPEND |
| static u32 acpi_suspend_states[] = { |
| [PM_SUSPEND_ON] = ACPI_STATE_S0, |
| [PM_SUSPEND_STANDBY] = ACPI_STATE_S1, |
| [PM_SUSPEND_MEM] = ACPI_STATE_S3, |
| [PM_SUSPEND_MAX] = ACPI_STATE_S5 |
| }; |
| |
| /** |
| * acpi_suspend_begin - Set the target system sleep state to the state |
| * associated with given @pm_state, if supported. |
| */ |
| static int acpi_suspend_begin(suspend_state_t pm_state) |
| { |
| u32 acpi_state = acpi_suspend_states[pm_state]; |
| int error; |
| |
| error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc(); |
| if (error) |
| return error; |
| |
| if (!sleep_states[acpi_state]) { |
| pr_err("ACPI does not support sleep state S%u\n", acpi_state); |
| return -ENOSYS; |
| } |
| if (acpi_state > ACPI_STATE_S1) |
| pm_set_suspend_via_firmware(); |
| |
| acpi_pm_start(acpi_state); |
| return 0; |
| } |
| |
| /** |
| * acpi_suspend_enter - Actually enter a sleep state. |
| * @pm_state: ignored |
| * |
| * Flush caches and go to sleep. For STR we have to call arch-specific |
| * assembly, which in turn call acpi_enter_sleep_state(). |
| * It's unfortunate, but it works. Please fix if you're feeling frisky. |
| */ |
| static int acpi_suspend_enter(suspend_state_t pm_state) |
| { |
| acpi_status status = AE_OK; |
| u32 acpi_state = acpi_target_sleep_state; |
| int error; |
| |
| trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true); |
| switch (acpi_state) { |
| case ACPI_STATE_S1: |
| barrier(); |
| status = acpi_enter_sleep_state(acpi_state); |
| break; |
| |
| case ACPI_STATE_S3: |
| if (!acpi_suspend_lowlevel) |
| return -ENOSYS; |
| error = acpi_suspend_lowlevel(); |
| if (error) |
| return error; |
| pr_info("Low-level resume complete\n"); |
| pm_set_resume_via_firmware(); |
| break; |
| } |
| trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false); |
| |
| /* This violates the spec but is required for bug compatibility. */ |
| acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); |
| |
| /* Reprogram control registers */ |
| acpi_leave_sleep_state_prep(acpi_state); |
| |
| /* ACPI 3.0 specs (P62) says that it's the responsibility |
| * of the OSPM to clear the status bit [ implying that the |
| * POWER_BUTTON event should not reach userspace ] |
| * |
| * However, we do generate a small hint for userspace in the form of |
| * a wakeup event. We flag this condition for now and generate the |
| * event later, as we're currently too early in resume to be able to |
| * generate wakeup events. |
| */ |
| if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) { |
| acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED; |
| |
| acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status); |
| |
| if (pwr_btn_status & ACPI_EVENT_FLAG_STATUS_SET) { |
| acpi_clear_event(ACPI_EVENT_POWER_BUTTON); |
| /* Flag for later */ |
| pwr_btn_event_pending = true; |
| } |
| } |
| |
| /* |
| * Disable and clear GPE status before interrupt is enabled. Some GPEs |
| * (like wakeup GPE) haven't handler, this can avoid such GPE misfire. |
| * acpi_leave_sleep_state will reenable specific GPEs later |
| */ |
| acpi_disable_all_gpes(); |
| /* Allow EC transactions to happen. */ |
| acpi_ec_unblock_transactions(); |
| |
| suspend_nvs_restore(); |
| |
| return ACPI_SUCCESS(status) ? 0 : -EFAULT; |
| } |
| |
| static int acpi_suspend_state_valid(suspend_state_t pm_state) |
| { |
| u32 acpi_state; |
| |
| switch (pm_state) { |
| case PM_SUSPEND_ON: |
| case PM_SUSPEND_STANDBY: |
| case PM_SUSPEND_MEM: |
| acpi_state = acpi_suspend_states[pm_state]; |
| |
| return sleep_states[acpi_state]; |
| default: |
| return 0; |
| } |
| } |
| |
| static const struct platform_suspend_ops acpi_suspend_ops = { |
| .valid = acpi_suspend_state_valid, |
| .begin = acpi_suspend_begin, |
| .prepare_late = acpi_pm_prepare, |
| .enter = acpi_suspend_enter, |
| .wake = acpi_pm_finish, |
| .end = acpi_pm_end, |
| }; |
| |
| /** |
| * acpi_suspend_begin_old - Set the target system sleep state to the |
| * state associated with given @pm_state, if supported, and |
| * execute the _PTS control method. This function is used if the |
| * pre-ACPI 2.0 suspend ordering has been requested. |
| */ |
| static int acpi_suspend_begin_old(suspend_state_t pm_state) |
| { |
| int error = acpi_suspend_begin(pm_state); |
| if (!error) |
| error = __acpi_pm_prepare(); |
| |
| return error; |
| } |
| |
| /* |
| * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has |
| * been requested. |
| */ |
| static const struct platform_suspend_ops acpi_suspend_ops_old = { |
| .valid = acpi_suspend_state_valid, |
| .begin = acpi_suspend_begin_old, |
| .prepare_late = acpi_pm_pre_suspend, |
| .enter = acpi_suspend_enter, |
| .wake = acpi_pm_finish, |
| .end = acpi_pm_end, |
| .recover = acpi_pm_finish, |
| }; |
| |
| static bool s2idle_wakeup; |
| |
| int acpi_s2idle_begin(void) |
| { |
| acpi_scan_lock_acquire(); |
| return 0; |
| } |
| |
| int acpi_s2idle_prepare(void) |
| { |
| if (acpi_sci_irq_valid()) { |
| enable_irq_wake(acpi_sci_irq); |
| acpi_ec_set_gpe_wake_mask(ACPI_GPE_ENABLE); |
| } |
| |
| acpi_enable_wakeup_devices(ACPI_STATE_S0); |
| |
| /* Change the configuration of GPEs to avoid spurious wakeup. */ |
| acpi_enable_all_wakeup_gpes(); |
| acpi_os_wait_events_complete(); |
| |
| s2idle_wakeup = true; |
| return 0; |
| } |
| |
| bool acpi_s2idle_wake(void) |
| { |
| if (!acpi_sci_irq_valid()) |
| return pm_wakeup_pending(); |
| |
| while (pm_wakeup_pending()) { |
| /* |
| * If IRQD_WAKEUP_ARMED is set for the SCI at this point, the |
| * SCI has not triggered while suspended, so bail out (the |
| * wakeup is pending anyway and the SCI is not the source of |
| * it). |
| */ |
| if (irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq))) { |
| pm_pr_dbg("Wakeup unrelated to ACPI SCI\n"); |
| return true; |
| } |
| |
| /* |
| * If the status bit of any enabled fixed event is set, the |
| * wakeup is regarded as valid. |
| */ |
| if (acpi_any_fixed_event_status_set()) { |
| pm_pr_dbg("ACPI fixed event wakeup\n"); |
| return true; |
| } |
| |
| /* Check wakeups from drivers sharing the SCI. */ |
| if (acpi_check_wakeup_handlers()) { |
| pm_pr_dbg("ACPI custom handler wakeup\n"); |
| return true; |
| } |
| |
| /* |
| * Check non-EC GPE wakeups and if there are none, cancel the |
| * SCI-related wakeup and dispatch the EC GPE. |
| */ |
| if (acpi_ec_dispatch_gpe()) { |
| pm_pr_dbg("ACPI non-EC GPE wakeup\n"); |
| return true; |
| } |
| |
| acpi_os_wait_events_complete(); |
| |
| /* |
| * The SCI is in the "suspended" state now and it cannot produce |
| * new wakeup events till the rearming below, so if any of them |
| * are pending here, they must be resulting from the processing |
| * of EC events above or coming from somewhere else. |
| */ |
| if (pm_wakeup_pending()) { |
| pm_pr_dbg("Wakeup after ACPI Notify sync\n"); |
| return true; |
| } |
| |
| pm_pr_dbg("Rearming ACPI SCI for wakeup\n"); |
| |
| pm_wakeup_clear(acpi_sci_irq); |
| rearm_wake_irq(acpi_sci_irq); |
| } |
| |
| return false; |
| } |
| |
| void acpi_s2idle_restore(void) |
| { |
| /* |
| * Drain pending events before restoring the working-state configuration |
| * of GPEs. |
| */ |
| acpi_os_wait_events_complete(); /* synchronize GPE processing */ |
| acpi_ec_flush_work(); /* flush the EC driver's workqueues */ |
| acpi_os_wait_events_complete(); /* synchronize Notify handling */ |
| |
| s2idle_wakeup = false; |
| |
| acpi_enable_all_runtime_gpes(); |
| |
| acpi_disable_wakeup_devices(ACPI_STATE_S0); |
| |
| if (acpi_sci_irq_valid()) { |
| acpi_ec_set_gpe_wake_mask(ACPI_GPE_DISABLE); |
| disable_irq_wake(acpi_sci_irq); |
| } |
| } |
| |
| void acpi_s2idle_end(void) |
| { |
| acpi_scan_lock_release(); |
| } |
| |
| static const struct platform_s2idle_ops acpi_s2idle_ops = { |
| .begin = acpi_s2idle_begin, |
| .prepare = acpi_s2idle_prepare, |
| .wake = acpi_s2idle_wake, |
| .restore = acpi_s2idle_restore, |
| .end = acpi_s2idle_end, |
| }; |
| |
| void __weak acpi_s2idle_setup(void) |
| { |
| s2idle_set_ops(&acpi_s2idle_ops); |
| } |
| |
| static void acpi_sleep_suspend_setup(void) |
| { |
| bool suspend_ops_needed = false; |
| int i; |
| |
| for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) |
| if (acpi_sleep_state_supported(i)) { |
| sleep_states[i] = 1; |
| suspend_ops_needed = true; |
| } |
| |
| if (suspend_ops_needed) |
| suspend_set_ops(old_suspend_ordering ? |
| &acpi_suspend_ops_old : &acpi_suspend_ops); |
| |
| acpi_s2idle_setup(); |
| } |
| |
| #else /* !CONFIG_SUSPEND */ |
| #define s2idle_wakeup (false) |
| static inline void acpi_sleep_suspend_setup(void) {} |
| #endif /* !CONFIG_SUSPEND */ |
| |
| bool acpi_s2idle_wakeup(void) |
| { |
| return s2idle_wakeup; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static u32 saved_bm_rld; |
| |
| static int acpi_save_bm_rld(void) |
| { |
| acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); |
| return 0; |
| } |
| |
| static void acpi_restore_bm_rld(void) |
| { |
| u32 resumed_bm_rld = 0; |
| |
| acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); |
| if (resumed_bm_rld == saved_bm_rld) |
| return; |
| |
| acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); |
| } |
| |
| static struct syscore_ops acpi_sleep_syscore_ops = { |
| .suspend = acpi_save_bm_rld, |
| .resume = acpi_restore_bm_rld, |
| }; |
| |
| static void acpi_sleep_syscore_init(void) |
| { |
| register_syscore_ops(&acpi_sleep_syscore_ops); |
| } |
| #else |
| static inline void acpi_sleep_syscore_init(void) {} |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| #ifdef CONFIG_HIBERNATION |
| static unsigned long s4_hardware_signature; |
| static struct acpi_table_facs *facs; |
| int acpi_check_s4_hw_signature = -1; /* Default behaviour is just to warn */ |
| |
| static int acpi_hibernation_begin(pm_message_t stage) |
| { |
| if (!nvs_nosave) { |
| int error = suspend_nvs_alloc(); |
| if (error) |
| return error; |
| } |
| |
| if (stage.event == PM_EVENT_HIBERNATE) |
| pm_set_suspend_via_firmware(); |
| |
| acpi_pm_start(ACPI_STATE_S4); |
| return 0; |
| } |
| |
| static int acpi_hibernation_enter(void) |
| { |
| acpi_status status = AE_OK; |
| |
| /* This shouldn't return. If it returns, we have a problem */ |
| status = acpi_enter_sleep_state(ACPI_STATE_S4); |
| /* Reprogram control registers */ |
| acpi_leave_sleep_state_prep(ACPI_STATE_S4); |
| |
| return ACPI_SUCCESS(status) ? 0 : -EFAULT; |
| } |
| |
| static void acpi_hibernation_leave(void) |
| { |
| pm_set_resume_via_firmware(); |
| /* |
| * If ACPI is not enabled by the BIOS and the boot kernel, we need to |
| * enable it here. |
| */ |
| acpi_enable(); |
| /* Reprogram control registers */ |
| acpi_leave_sleep_state_prep(ACPI_STATE_S4); |
| /* Check the hardware signature */ |
| if (facs && s4_hardware_signature != facs->hardware_signature) |
| pr_crit("Hardware changed while hibernated, success doubtful!\n"); |
| /* Restore the NVS memory area */ |
| suspend_nvs_restore(); |
| /* Allow EC transactions to happen. */ |
| acpi_ec_unblock_transactions(); |
| } |
| |
| static void acpi_pm_thaw(void) |
| { |
| acpi_ec_unblock_transactions(); |
| acpi_enable_all_runtime_gpes(); |
| } |
| |
| static const struct platform_hibernation_ops acpi_hibernation_ops = { |
| .begin = acpi_hibernation_begin, |
| .end = acpi_pm_end, |
| .pre_snapshot = acpi_pm_prepare, |
| .finish = acpi_pm_finish, |
| .prepare = acpi_pm_prepare, |
| .enter = acpi_hibernation_enter, |
| .leave = acpi_hibernation_leave, |
| .pre_restore = acpi_pm_freeze, |
| .restore_cleanup = acpi_pm_thaw, |
| }; |
| |
| /** |
| * acpi_hibernation_begin_old - Set the target system sleep state to |
| * ACPI_STATE_S4 and execute the _PTS control method. This |
| * function is used if the pre-ACPI 2.0 suspend ordering has been |
| * requested. |
| */ |
| static int acpi_hibernation_begin_old(pm_message_t stage) |
| { |
| int error; |
| /* |
| * The _TTS object should always be evaluated before the _PTS object. |
| * When the old_suspended_ordering is true, the _PTS object is |
| * evaluated in the acpi_sleep_prepare. |
| */ |
| acpi_sleep_tts_switch(ACPI_STATE_S4); |
| |
| error = acpi_sleep_prepare(ACPI_STATE_S4); |
| if (error) |
| return error; |
| |
| if (!nvs_nosave) { |
| error = suspend_nvs_alloc(); |
| if (error) |
| return error; |
| } |
| |
| if (stage.event == PM_EVENT_HIBERNATE) |
| pm_set_suspend_via_firmware(); |
| |
| acpi_target_sleep_state = ACPI_STATE_S4; |
| acpi_scan_lock_acquire(); |
| return 0; |
| } |
| |
| /* |
| * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has |
| * been requested. |
| */ |
| static const struct platform_hibernation_ops acpi_hibernation_ops_old = { |
| .begin = acpi_hibernation_begin_old, |
| .end = acpi_pm_end, |
| .pre_snapshot = acpi_pm_pre_suspend, |
| .prepare = acpi_pm_freeze, |
| .finish = acpi_pm_finish, |
| .enter = acpi_hibernation_enter, |
| .leave = acpi_hibernation_leave, |
| .pre_restore = acpi_pm_freeze, |
| .restore_cleanup = acpi_pm_thaw, |
| .recover = acpi_pm_finish, |
| }; |
| |
| static void acpi_sleep_hibernate_setup(void) |
| { |
| if (!acpi_sleep_state_supported(ACPI_STATE_S4)) |
| return; |
| |
| hibernation_set_ops(old_suspend_ordering ? |
| &acpi_hibernation_ops_old : &acpi_hibernation_ops); |
| sleep_states[ACPI_STATE_S4] = 1; |
| if (!acpi_check_s4_hw_signature) |
| return; |
| |
| acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs); |
| if (facs) { |
| /* |
| * s4_hardware_signature is the local variable which is just |
| * used to warn about mismatch after we're attempting to |
| * resume (in violation of the ACPI specification.) |
| */ |
| s4_hardware_signature = facs->hardware_signature; |
| |
| if (acpi_check_s4_hw_signature > 0) { |
| /* |
| * If we're actually obeying the ACPI specification |
| * then the signature is written out as part of the |
| * swsusp header, in order to allow the boot kernel |
| * to gracefully decline to resume. |
| */ |
| swsusp_hardware_signature = facs->hardware_signature; |
| } |
| } |
| } |
| #else /* !CONFIG_HIBERNATION */ |
| static inline void acpi_sleep_hibernate_setup(void) {} |
| #endif /* !CONFIG_HIBERNATION */ |
| |
| static void acpi_power_off_prepare(void) |
| { |
| /* Prepare to power off the system */ |
| acpi_sleep_prepare(ACPI_STATE_S5); |
| acpi_disable_all_gpes(); |
| acpi_os_wait_events_complete(); |
| } |
| |
| static void acpi_power_off(void) |
| { |
| /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ |
| pr_debug("%s called\n", __func__); |
| local_irq_disable(); |
| acpi_enter_sleep_state(ACPI_STATE_S5); |
| } |
| |
| int __init acpi_sleep_init(void) |
| { |
| char supported[ACPI_S_STATE_COUNT * 3 + 1]; |
| char *pos = supported; |
| int i; |
| |
| acpi_sleep_dmi_check(); |
| |
| sleep_states[ACPI_STATE_S0] = 1; |
| |
| acpi_sleep_syscore_init(); |
| acpi_sleep_suspend_setup(); |
| acpi_sleep_hibernate_setup(); |
| |
| if (acpi_sleep_state_supported(ACPI_STATE_S5)) { |
| sleep_states[ACPI_STATE_S5] = 1; |
| pm_power_off_prepare = acpi_power_off_prepare; |
| pm_power_off = acpi_power_off; |
| } else { |
| acpi_no_s5 = true; |
| } |
| |
| supported[0] = 0; |
| for (i = 0; i < ACPI_S_STATE_COUNT; i++) { |
| if (sleep_states[i]) |
| pos += sprintf(pos, " S%d", i); |
| } |
| pr_info("(supports%s)\n", supported); |
| |
| /* |
| * Register the tts_notifier to reboot notifier list so that the _TTS |
| * object can also be evaluated when the system enters S5. |
| */ |
| register_reboot_notifier(&tts_notifier); |
| return 0; |
| } |