blob: b07f3eca669bffc6000bd919c808372165809929 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sitronix ST7701 based LCD panels
maintainers:
- Jagan Teki <jagan@amarulasolutions.com>
description: |
ST7701 designed for small and medium sizes of TFT LCD display, is
capable of supporting up to 480RGBX864 in resolution. It provides
several system interfaces like MIPI/RGB/SPI.
Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
inbuilt ST7701 chip.
Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
which has built-in ST7701 chip.
properties:
compatible:
items:
- enum:
- anbernic,rg-arc-panel
- anbernic,rg28xx-panel
- densitron,dmt028vghmcmi-1a
- elida,kd50t048a
- techstar,ts8550b
- const: sitronix,st7701
reg:
description: DSI / SPI channel used by that screen
maxItems: 1
VCC-supply:
description: analog regulator for MIPI circuit
IOVCC-supply:
description: I/O system regulator
dc-gpios:
maxItems: 1
description:
Controller data/command selection (D/CX) in 4-line SPI mode.
If not set, the controller is in 3-line SPI mode.
Disallowed for DSI.
port: true
reset-gpios: true
rotation: true
backlight: true
required:
- compatible
- reg
- VCC-supply
- IOVCC-supply
- port
- reset-gpios
allOf:
- $ref: panel-common.yaml#
- if:
properties:
compatible:
contains:
# SPI connected panels
enum:
- anbernic,rg28xx-panel
then:
$ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
not:
contains:
# DSI or SPI without D/CX pin
enum:
- anbernic,rg-arc-panel
- anbernic,rg28xx-panel
- densitron,dmt028vghmcmi-1a
- elida,kd50t048a
- techstar,ts8550b
then:
required:
- dc-gpios
else:
properties:
dc-gpios: false
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
dsi {
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
compatible = "techstar,ts8550b", "sitronix,st7701";
reg = <0>;
VCC-supply = <&reg_dldo2>;
IOVCC-supply = <&reg_dldo2>;
reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
backlight = <&backlight>;
port {
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
};
};
- |
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
compatible = "anbernic,rg28xx-panel", "sitronix,st7701";
reg = <0>;
spi-max-frequency = <3125000>;
VCC-supply = <&reg_lcd>;
IOVCC-supply = <&reg_lcd>;
reset-gpios = <&pio 8 14 GPIO_ACTIVE_HIGH>; /* LCD-RST: PI14 */
backlight = <&backlight>;
port {
panel_in_rgb: endpoint {
remote-endpoint = <&tcon_lcd0_out_lcd>;
};
};
};
};