| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2016 Cavium, Inc. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/pci.h> |
| #include <linux/printk.h> |
| |
| #include "cptpf.h" |
| |
| #define DRV_NAME "thunder-cpt" |
| #define DRV_VERSION "1.0" |
| |
| static u32 num_vfs = 4; /* Default 4 VF enabled */ |
| module_param(num_vfs, uint, 0444); |
| MODULE_PARM_DESC(num_vfs, "Number of VFs to enable(1-16)"); |
| |
| /* |
| * Disable cores specified by coremask |
| */ |
| static void cpt_disable_cores(struct cpt_device *cpt, u64 coremask, |
| u8 type, u8 grp) |
| { |
| u64 pf_exe_ctl; |
| u32 timeout = 100; |
| u64 grpmask = 0; |
| struct device *dev = &cpt->pdev->dev; |
| |
| if (type == AE_TYPES) |
| coremask = (coremask << cpt->max_se_cores); |
| |
| /* Disengage the cores from groups */ |
| grpmask = cpt_read_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp)); |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp), |
| (grpmask & ~coremask)); |
| udelay(CSR_DELAY); |
| grp = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXEC_BUSY(0)); |
| while (grp & coremask) { |
| dev_err(dev, "Cores still busy %llx", coremask); |
| grp = cpt_read_csr64(cpt->reg_base, |
| CPTX_PF_EXEC_BUSY(0)); |
| if (timeout--) |
| break; |
| |
| udelay(CSR_DELAY); |
| } |
| |
| /* Disable the cores */ |
| pf_exe_ctl = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0)); |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0), |
| (pf_exe_ctl & ~coremask)); |
| udelay(CSR_DELAY); |
| } |
| |
| /* |
| * Enable cores specified by coremask |
| */ |
| static void cpt_enable_cores(struct cpt_device *cpt, u64 coremask, |
| u8 type) |
| { |
| u64 pf_exe_ctl; |
| |
| if (type == AE_TYPES) |
| coremask = (coremask << cpt->max_se_cores); |
| |
| pf_exe_ctl = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0)); |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0), |
| (pf_exe_ctl | coremask)); |
| udelay(CSR_DELAY); |
| } |
| |
| static void cpt_configure_group(struct cpt_device *cpt, u8 grp, |
| u64 coremask, u8 type) |
| { |
| u64 pf_gx_en = 0; |
| |
| if (type == AE_TYPES) |
| coremask = (coremask << cpt->max_se_cores); |
| |
| pf_gx_en = cpt_read_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp)); |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp), |
| (pf_gx_en | coremask)); |
| udelay(CSR_DELAY); |
| } |
| |
| static void cpt_disable_mbox_interrupts(struct cpt_device *cpt) |
| { |
| /* Clear mbox(0) interupts for all vfs */ |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_MBOX_ENA_W1CX(0, 0), ~0ull); |
| } |
| |
| static void cpt_disable_ecc_interrupts(struct cpt_device *cpt) |
| { |
| /* Clear ecc(0) interupts for all vfs */ |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_ECC0_ENA_W1C(0), ~0ull); |
| } |
| |
| static void cpt_disable_exec_interrupts(struct cpt_device *cpt) |
| { |
| /* Clear exec interupts for all vfs */ |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_EXEC_ENA_W1C(0), ~0ull); |
| } |
| |
| static void cpt_disable_all_interrupts(struct cpt_device *cpt) |
| { |
| cpt_disable_mbox_interrupts(cpt); |
| cpt_disable_ecc_interrupts(cpt); |
| cpt_disable_exec_interrupts(cpt); |
| } |
| |
| static void cpt_enable_mbox_interrupts(struct cpt_device *cpt) |
| { |
| /* Set mbox(0) interupts for all vfs */ |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_MBOX_ENA_W1SX(0, 0), ~0ull); |
| } |
| |
| static int cpt_load_microcode(struct cpt_device *cpt, struct microcode *mcode) |
| { |
| int ret = 0, core = 0, shift = 0; |
| u32 total_cores = 0; |
| struct device *dev = &cpt->pdev->dev; |
| |
| if (!mcode || !mcode->code) { |
| dev_err(dev, "Either the mcode is null or data is NULL\n"); |
| return -EINVAL; |
| } |
| |
| if (mcode->code_size == 0) { |
| dev_err(dev, "microcode size is 0\n"); |
| return -EINVAL; |
| } |
| |
| /* Assumes 0-9 are SE cores for UCODE_BASE registers and |
| * AE core bases follow |
| */ |
| if (mcode->is_ae) { |
| core = CPT_MAX_SE_CORES; /* start couting from 10 */ |
| total_cores = CPT_MAX_TOTAL_CORES; /* upto 15 */ |
| } else { |
| core = 0; /* start couting from 0 */ |
| total_cores = CPT_MAX_SE_CORES; /* upto 9 */ |
| } |
| |
| /* Point to microcode for each core of the group */ |
| for (; core < total_cores ; core++, shift++) { |
| if (mcode->core_mask & (1 << shift)) { |
| cpt_write_csr64(cpt->reg_base, |
| CPTX_PF_ENGX_UCODE_BASE(0, core), |
| (u64)mcode->phys_base); |
| } |
| } |
| return ret; |
| } |
| |
| static int do_cpt_init(struct cpt_device *cpt, struct microcode *mcode) |
| { |
| int ret = 0; |
| struct device *dev = &cpt->pdev->dev; |
| |
| /* Make device not ready */ |
| cpt->flags &= ~CPT_FLAG_DEVICE_READY; |
| /* Disable All PF interrupts */ |
| cpt_disable_all_interrupts(cpt); |
| /* Calculate mcode group and coremasks */ |
| if (mcode->is_ae) { |
| if (mcode->num_cores > cpt->max_ae_cores) { |
| dev_err(dev, "Requested for more cores than available AE cores\n"); |
| ret = -EINVAL; |
| goto cpt_init_fail; |
| } |
| |
| if (cpt->next_group >= CPT_MAX_CORE_GROUPS) { |
| dev_err(dev, "Can't load, all eight microcode groups in use"); |
| return -ENFILE; |
| } |
| |
| mcode->group = cpt->next_group; |
| /* Convert requested cores to mask */ |
| mcode->core_mask = GENMASK(mcode->num_cores, 0); |
| cpt_disable_cores(cpt, mcode->core_mask, AE_TYPES, |
| mcode->group); |
| /* Load microcode for AE engines */ |
| ret = cpt_load_microcode(cpt, mcode); |
| if (ret) { |
| dev_err(dev, "Microcode load Failed for %s\n", |
| mcode->version); |
| goto cpt_init_fail; |
| } |
| cpt->next_group++; |
| /* Configure group mask for the mcode */ |
| cpt_configure_group(cpt, mcode->group, mcode->core_mask, |
| AE_TYPES); |
| /* Enable AE cores for the group mask */ |
| cpt_enable_cores(cpt, mcode->core_mask, AE_TYPES); |
| } else { |
| if (mcode->num_cores > cpt->max_se_cores) { |
| dev_err(dev, "Requested for more cores than available SE cores\n"); |
| ret = -EINVAL; |
| goto cpt_init_fail; |
| } |
| if (cpt->next_group >= CPT_MAX_CORE_GROUPS) { |
| dev_err(dev, "Can't load, all eight microcode groups in use"); |
| return -ENFILE; |
| } |
| |
| mcode->group = cpt->next_group; |
| /* Covert requested cores to mask */ |
| mcode->core_mask = GENMASK(mcode->num_cores, 0); |
| cpt_disable_cores(cpt, mcode->core_mask, SE_TYPES, |
| mcode->group); |
| /* Load microcode for SE engines */ |
| ret = cpt_load_microcode(cpt, mcode); |
| if (ret) { |
| dev_err(dev, "Microcode load Failed for %s\n", |
| mcode->version); |
| goto cpt_init_fail; |
| } |
| cpt->next_group++; |
| /* Configure group mask for the mcode */ |
| cpt_configure_group(cpt, mcode->group, mcode->core_mask, |
| SE_TYPES); |
| /* Enable SE cores for the group mask */ |
| cpt_enable_cores(cpt, mcode->core_mask, SE_TYPES); |
| } |
| |
| /* Enabled PF mailbox interrupts */ |
| cpt_enable_mbox_interrupts(cpt); |
| cpt->flags |= CPT_FLAG_DEVICE_READY; |
| |
| return ret; |
| |
| cpt_init_fail: |
| /* Enabled PF mailbox interrupts */ |
| cpt_enable_mbox_interrupts(cpt); |
| |
| return ret; |
| } |
| |
| struct ucode_header { |
| u8 version[CPT_UCODE_VERSION_SZ]; |
| __be32 code_length; |
| u32 data_length; |
| u64 sram_address; |
| }; |
| |
| static int cpt_ucode_load_fw(struct cpt_device *cpt, const u8 *fw, bool is_ae) |
| { |
| const struct firmware *fw_entry; |
| struct device *dev = &cpt->pdev->dev; |
| struct ucode_header *ucode; |
| unsigned int code_length; |
| struct microcode *mcode; |
| int j, ret = 0; |
| |
| ret = request_firmware(&fw_entry, fw, dev); |
| if (ret) |
| return ret; |
| |
| ucode = (struct ucode_header *)fw_entry->data; |
| mcode = &cpt->mcode[cpt->next_mc_idx]; |
| memcpy(mcode->version, (u8 *)fw_entry->data, CPT_UCODE_VERSION_SZ); |
| code_length = ntohl(ucode->code_length); |
| if (code_length == 0 || code_length >= INT_MAX / 2) { |
| ret = -EINVAL; |
| goto fw_release; |
| } |
| mcode->code_size = code_length * 2; |
| |
| mcode->is_ae = is_ae; |
| mcode->core_mask = 0ULL; |
| mcode->num_cores = is_ae ? 6 : 10; |
| |
| /* Allocate DMAable space */ |
| mcode->code = dma_alloc_coherent(&cpt->pdev->dev, mcode->code_size, |
| &mcode->phys_base, GFP_KERNEL); |
| if (!mcode->code) { |
| dev_err(dev, "Unable to allocate space for microcode"); |
| ret = -ENOMEM; |
| goto fw_release; |
| } |
| |
| memcpy((void *)mcode->code, (void *)(fw_entry->data + sizeof(*ucode)), |
| mcode->code_size); |
| |
| /* Byte swap 64-bit */ |
| for (j = 0; j < (mcode->code_size / 8); j++) |
| ((__be64 *)mcode->code)[j] = cpu_to_be64(((u64 *)mcode->code)[j]); |
| /* MC needs 16-bit swap */ |
| for (j = 0; j < (mcode->code_size / 2); j++) |
| ((__be16 *)mcode->code)[j] = cpu_to_be16(((u16 *)mcode->code)[j]); |
| |
| dev_dbg(dev, "mcode->code_size = %u\n", mcode->code_size); |
| dev_dbg(dev, "mcode->is_ae = %u\n", mcode->is_ae); |
| dev_dbg(dev, "mcode->num_cores = %u\n", mcode->num_cores); |
| dev_dbg(dev, "mcode->code = %llx\n", (u64)mcode->code); |
| dev_dbg(dev, "mcode->phys_base = %llx\n", mcode->phys_base); |
| |
| ret = do_cpt_init(cpt, mcode); |
| if (ret) { |
| dev_err(dev, "do_cpt_init failed with ret: %d\n", ret); |
| goto fw_release; |
| } |
| |
| dev_info(dev, "Microcode Loaded %s\n", mcode->version); |
| mcode->is_mc_valid = 1; |
| cpt->next_mc_idx++; |
| |
| fw_release: |
| release_firmware(fw_entry); |
| |
| return ret; |
| } |
| |
| static int cpt_ucode_load(struct cpt_device *cpt) |
| { |
| int ret = 0; |
| struct device *dev = &cpt->pdev->dev; |
| |
| ret = cpt_ucode_load_fw(cpt, "cpt8x-mc-ae.out", true); |
| if (ret) { |
| dev_err(dev, "ae:cpt_ucode_load failed with ret: %d\n", ret); |
| return ret; |
| } |
| ret = cpt_ucode_load_fw(cpt, "cpt8x-mc-se.out", false); |
| if (ret) { |
| dev_err(dev, "se:cpt_ucode_load failed with ret: %d\n", ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static irqreturn_t cpt_mbx0_intr_handler(int irq, void *cpt_irq) |
| { |
| struct cpt_device *cpt = (struct cpt_device *)cpt_irq; |
| |
| cpt_mbox_intr_handler(cpt, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void cpt_reset(struct cpt_device *cpt) |
| { |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_RESET(0), 1); |
| } |
| |
| static void cpt_find_max_enabled_cores(struct cpt_device *cpt) |
| { |
| union cptx_pf_constants pf_cnsts = {0}; |
| |
| pf_cnsts.u = cpt_read_csr64(cpt->reg_base, CPTX_PF_CONSTANTS(0)); |
| cpt->max_se_cores = pf_cnsts.s.se; |
| cpt->max_ae_cores = pf_cnsts.s.ae; |
| } |
| |
| static u32 cpt_check_bist_status(struct cpt_device *cpt) |
| { |
| union cptx_pf_bist_status bist_sts = {0}; |
| |
| bist_sts.u = cpt_read_csr64(cpt->reg_base, |
| CPTX_PF_BIST_STATUS(0)); |
| |
| return bist_sts.u; |
| } |
| |
| static u64 cpt_check_exe_bist_status(struct cpt_device *cpt) |
| { |
| union cptx_pf_exe_bist_status bist_sts = {0}; |
| |
| bist_sts.u = cpt_read_csr64(cpt->reg_base, |
| CPTX_PF_EXE_BIST_STATUS(0)); |
| |
| return bist_sts.u; |
| } |
| |
| static void cpt_disable_all_cores(struct cpt_device *cpt) |
| { |
| u32 grp, timeout = 100; |
| struct device *dev = &cpt->pdev->dev; |
| |
| /* Disengage the cores from groups */ |
| for (grp = 0; grp < CPT_MAX_CORE_GROUPS; grp++) { |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp), 0); |
| udelay(CSR_DELAY); |
| } |
| |
| grp = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXEC_BUSY(0)); |
| while (grp) { |
| dev_err(dev, "Cores still busy"); |
| grp = cpt_read_csr64(cpt->reg_base, |
| CPTX_PF_EXEC_BUSY(0)); |
| if (timeout--) |
| break; |
| |
| udelay(CSR_DELAY); |
| } |
| /* Disable the cores */ |
| cpt_write_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0), 0); |
| } |
| |
| /* |
| * Ensure all cores are disengaged from all groups by |
| * calling cpt_disable_all_cores() before calling this |
| * function. |
| */ |
| static void cpt_unload_microcode(struct cpt_device *cpt) |
| { |
| u32 grp = 0, core; |
| |
| /* Free microcode bases and reset group masks */ |
| for (grp = 0; grp < CPT_MAX_CORE_GROUPS; grp++) { |
| struct microcode *mcode = &cpt->mcode[grp]; |
| |
| if (cpt->mcode[grp].code) |
| dma_free_coherent(&cpt->pdev->dev, mcode->code_size, |
| mcode->code, mcode->phys_base); |
| mcode->code = NULL; |
| } |
| /* Clear UCODE_BASE registers for all engines */ |
| for (core = 0; core < CPT_MAX_TOTAL_CORES; core++) |
| cpt_write_csr64(cpt->reg_base, |
| CPTX_PF_ENGX_UCODE_BASE(0, core), 0ull); |
| } |
| |
| static int cpt_device_init(struct cpt_device *cpt) |
| { |
| u64 bist; |
| struct device *dev = &cpt->pdev->dev; |
| |
| /* Reset the PF when probed first */ |
| cpt_reset(cpt); |
| msleep(100); |
| |
| /*Check BIST status*/ |
| bist = (u64)cpt_check_bist_status(cpt); |
| if (bist) { |
| dev_err(dev, "RAM BIST failed with code 0x%llx", bist); |
| return -ENODEV; |
| } |
| |
| bist = cpt_check_exe_bist_status(cpt); |
| if (bist) { |
| dev_err(dev, "Engine BIST failed with code 0x%llx", bist); |
| return -ENODEV; |
| } |
| |
| /*Get CLK frequency*/ |
| /*Get max enabled cores */ |
| cpt_find_max_enabled_cores(cpt); |
| /*Disable all cores*/ |
| cpt_disable_all_cores(cpt); |
| /*Reset device parameters*/ |
| cpt->next_mc_idx = 0; |
| cpt->next_group = 0; |
| /* PF is ready */ |
| cpt->flags |= CPT_FLAG_DEVICE_READY; |
| |
| return 0; |
| } |
| |
| static int cpt_register_interrupts(struct cpt_device *cpt) |
| { |
| int ret; |
| struct device *dev = &cpt->pdev->dev; |
| |
| /* Enable MSI-X */ |
| ret = pci_alloc_irq_vectors(cpt->pdev, CPT_PF_MSIX_VECTORS, |
| CPT_PF_MSIX_VECTORS, PCI_IRQ_MSIX); |
| if (ret < 0) { |
| dev_err(&cpt->pdev->dev, "Request for #%d msix vectors failed\n", |
| CPT_PF_MSIX_VECTORS); |
| return ret; |
| } |
| |
| /* Register mailbox interrupt handlers */ |
| ret = request_irq(pci_irq_vector(cpt->pdev, CPT_PF_INT_VEC_E_MBOXX(0)), |
| cpt_mbx0_intr_handler, 0, "CPT Mbox0", cpt); |
| if (ret) |
| goto fail; |
| |
| /* Enable mailbox interrupt */ |
| cpt_enable_mbox_interrupts(cpt); |
| return 0; |
| |
| fail: |
| dev_err(dev, "Request irq failed\n"); |
| pci_disable_msix(cpt->pdev); |
| return ret; |
| } |
| |
| static void cpt_unregister_interrupts(struct cpt_device *cpt) |
| { |
| free_irq(pci_irq_vector(cpt->pdev, CPT_PF_INT_VEC_E_MBOXX(0)), cpt); |
| pci_disable_msix(cpt->pdev); |
| } |
| |
| static int cpt_sriov_init(struct cpt_device *cpt, int num_vfs) |
| { |
| int pos = 0; |
| int err; |
| u16 total_vf_cnt; |
| struct pci_dev *pdev = cpt->pdev; |
| |
| pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); |
| if (!pos) { |
| dev_err(&pdev->dev, "SRIOV capability is not found in PCIe config space\n"); |
| return -ENODEV; |
| } |
| |
| cpt->num_vf_en = num_vfs; /* User requested VFs */ |
| pci_read_config_word(pdev, (pos + PCI_SRIOV_TOTAL_VF), &total_vf_cnt); |
| if (total_vf_cnt < cpt->num_vf_en) |
| cpt->num_vf_en = total_vf_cnt; |
| |
| if (!total_vf_cnt) |
| return 0; |
| |
| /*Enabled the available VFs */ |
| err = pci_enable_sriov(pdev, cpt->num_vf_en); |
| if (err) { |
| dev_err(&pdev->dev, "SRIOV enable failed, num VF is %d\n", |
| cpt->num_vf_en); |
| cpt->num_vf_en = 0; |
| return err; |
| } |
| |
| /* TODO: Optionally enable static VQ priorities feature */ |
| |
| dev_info(&pdev->dev, "SRIOV enabled, number of VF available %d\n", |
| cpt->num_vf_en); |
| |
| cpt->flags |= CPT_FLAG_SRIOV_ENABLED; |
| |
| return 0; |
| } |
| |
| static int cpt_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct device *dev = &pdev->dev; |
| struct cpt_device *cpt; |
| int err; |
| |
| if (num_vfs > 16 || num_vfs < 4) { |
| dev_warn(dev, "Invalid vf count %d, Resetting it to 4(default)\n", |
| num_vfs); |
| num_vfs = 4; |
| } |
| |
| cpt = devm_kzalloc(dev, sizeof(*cpt), GFP_KERNEL); |
| if (!cpt) |
| return -ENOMEM; |
| |
| pci_set_drvdata(pdev, cpt); |
| cpt->pdev = pdev; |
| err = pci_enable_device(pdev); |
| if (err) { |
| dev_err(dev, "Failed to enable PCI device\n"); |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| err = pci_request_regions(pdev, DRV_NAME); |
| if (err) { |
| dev_err(dev, "PCI request regions failed 0x%x\n", err); |
| goto cpt_err_disable_device; |
| } |
| |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48)); |
| if (err) { |
| dev_err(dev, "Unable to get usable 48-bit DMA configuration\n"); |
| goto cpt_err_release_regions; |
| } |
| |
| /* MAP PF's configuration registers */ |
| cpt->reg_base = pcim_iomap(pdev, 0, 0); |
| if (!cpt->reg_base) { |
| dev_err(dev, "Cannot map config register space, aborting\n"); |
| err = -ENOMEM; |
| goto cpt_err_release_regions; |
| } |
| |
| /* CPT device HW initialization */ |
| cpt_device_init(cpt); |
| |
| /* Register interrupts */ |
| err = cpt_register_interrupts(cpt); |
| if (err) |
| goto cpt_err_release_regions; |
| |
| err = cpt_ucode_load(cpt); |
| if (err) |
| goto cpt_err_unregister_interrupts; |
| |
| /* Configure SRIOV */ |
| err = cpt_sriov_init(cpt, num_vfs); |
| if (err) |
| goto cpt_err_unregister_interrupts; |
| |
| return 0; |
| |
| cpt_err_unregister_interrupts: |
| cpt_unregister_interrupts(cpt); |
| cpt_err_release_regions: |
| pci_release_regions(pdev); |
| cpt_err_disable_device: |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| static void cpt_remove(struct pci_dev *pdev) |
| { |
| struct cpt_device *cpt = pci_get_drvdata(pdev); |
| |
| /* Disengage SE and AE cores from all groups*/ |
| cpt_disable_all_cores(cpt); |
| /* Unload microcodes */ |
| cpt_unload_microcode(cpt); |
| cpt_unregister_interrupts(cpt); |
| pci_disable_sriov(pdev); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| static void cpt_shutdown(struct pci_dev *pdev) |
| { |
| struct cpt_device *cpt = pci_get_drvdata(pdev); |
| |
| if (!cpt) |
| return; |
| |
| dev_info(&pdev->dev, "Shutdown device %x:%x.\n", |
| (u32)pdev->vendor, (u32)pdev->device); |
| |
| cpt_unregister_interrupts(cpt); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| /* Supported devices */ |
| static const struct pci_device_id cpt_id_table[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, CPT_81XX_PCI_PF_DEVICE_ID) }, |
| { 0, } /* end of table */ |
| }; |
| |
| static struct pci_driver cpt_pci_driver = { |
| .name = DRV_NAME, |
| .id_table = cpt_id_table, |
| .probe = cpt_probe, |
| .remove = cpt_remove, |
| .shutdown = cpt_shutdown, |
| }; |
| |
| module_pci_driver(cpt_pci_driver); |
| |
| MODULE_AUTHOR("George Cherian <george.cherian@cavium.com>"); |
| MODULE_DESCRIPTION("Cavium Thunder CPT Physical Function Driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_DEVICE_TABLE(pci, cpt_id_table); |