| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Headers for EFI variable service via StandAloneMM, EDK2 application running |
| * in OP-TEE. Most of the structs and defines resemble the EDK2 naming. |
| * |
| * Copyright (c) 2017, Intel Corporation. All rights reserved. |
| * Copyright (C) 2020 Linaro Ltd. |
| */ |
| |
| #ifndef _MM_COMMUNICATION_H_ |
| #define _MM_COMMUNICATION_H_ |
| |
| /* |
| * Interface to the pseudo Trusted Application (TA), which provides a |
| * communication channel with the Standalone MM (Management Mode) |
| * Secure Partition running at Secure-EL0 |
| */ |
| |
| #define PTA_STMM_CMD_COMMUNICATE 0 |
| |
| /* |
| * Defined in OP-TEE, this UUID is used to identify the pseudo-TA. |
| * OP-TEE is using big endian GUIDs while UEFI uses little endian ones |
| */ |
| #define PTA_STMM_UUID \ |
| UUID_INIT(0xed32d533, 0x99e6, 0x4209, \ |
| 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7) |
| |
| #define EFI_MM_VARIABLE_GUID \ |
| EFI_GUID(0xed32d533, 0x99e6, 0x4209, \ |
| 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7) |
| |
| /** |
| * struct efi_mm_communicate_header - Header used for SMM variable communication |
| |
| * @header_guid: header use for disambiguation of content |
| * @message_len: length of the message. Does not include the size of the |
| * header |
| * @data: payload of the message |
| * |
| * Defined in the PI spec as EFI_MM_COMMUNICATE_HEADER. |
| * To avoid confusion in interpreting frames, the communication buffer should |
| * always begin with efi_mm_communicate_header. |
| */ |
| struct efi_mm_communicate_header { |
| efi_guid_t header_guid; |
| size_t message_len; |
| u8 data[]; |
| } __packed; |
| |
| #define MM_COMMUNICATE_HEADER_SIZE \ |
| (sizeof(struct efi_mm_communicate_header)) |
| |
| /* SPM return error codes */ |
| #define ARM_SVC_SPM_RET_SUCCESS 0 |
| #define ARM_SVC_SPM_RET_NOT_SUPPORTED -1 |
| #define ARM_SVC_SPM_RET_INVALID_PARAMS -2 |
| #define ARM_SVC_SPM_RET_DENIED -3 |
| #define ARM_SVC_SPM_RET_NO_MEMORY -5 |
| |
| #define SMM_VARIABLE_FUNCTION_GET_VARIABLE 1 |
| /* |
| * The payload for this function is |
| * SMM_VARIABLE_COMMUNICATE_GET_NEXT_VARIABLE_NAME. |
| */ |
| #define SMM_VARIABLE_FUNCTION_GET_NEXT_VARIABLE_NAME 2 |
| /* |
| * The payload for this function is SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE. |
| */ |
| #define SMM_VARIABLE_FUNCTION_SET_VARIABLE 3 |
| /* |
| * The payload for this function is |
| * SMM_VARIABLE_COMMUNICATE_QUERY_VARIABLE_INFO. |
| */ |
| #define SMM_VARIABLE_FUNCTION_QUERY_VARIABLE_INFO 4 |
| /* |
| * It is a notify event, no extra payload for this function. |
| */ |
| #define SMM_VARIABLE_FUNCTION_READY_TO_BOOT 5 |
| /* |
| * It is a notify event, no extra payload for this function. |
| */ |
| #define SMM_VARIABLE_FUNCTION_EXIT_BOOT_SERVICE 6 |
| /* |
| * The payload for this function is VARIABLE_INFO_ENTRY. |
| * The GUID in EFI_SMM_COMMUNICATE_HEADER is gEfiSmmVariableProtocolGuid. |
| */ |
| #define SMM_VARIABLE_FUNCTION_GET_STATISTICS 7 |
| /* |
| * The payload for this function is SMM_VARIABLE_COMMUNICATE_LOCK_VARIABLE |
| */ |
| #define SMM_VARIABLE_FUNCTION_LOCK_VARIABLE 8 |
| |
| #define SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_SET 9 |
| |
| #define SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_GET 10 |
| |
| #define SMM_VARIABLE_FUNCTION_GET_PAYLOAD_SIZE 11 |
| /* |
| * The payload for this function is |
| * SMM_VARIABLE_COMMUNICATE_RUNTIME_VARIABLE_CACHE_CONTEXT |
| */ |
| #define SMM_VARIABLE_FUNCTION_INIT_RUNTIME_VARIABLE_CACHE_CONTEXT 12 |
| |
| #define SMM_VARIABLE_FUNCTION_SYNC_RUNTIME_CACHE 13 |
| /* |
| * The payload for this function is |
| * SMM_VARIABLE_COMMUNICATE_GET_RUNTIME_CACHE_INFO |
| */ |
| #define SMM_VARIABLE_FUNCTION_GET_RUNTIME_CACHE_INFO 14 |
| |
| /** |
| * struct smm_variable_communicate_header - Used for SMM variable communication |
| |
| * @function: function to call in Smm. |
| * @ret_status: return status |
| * @data: payload |
| */ |
| struct smm_variable_communicate_header { |
| size_t function; |
| efi_status_t ret_status; |
| u8 data[]; |
| }; |
| |
| #define MM_VARIABLE_COMMUNICATE_SIZE \ |
| (sizeof(struct smm_variable_communicate_header)) |
| |
| /** |
| * struct smm_variable_access - Used to communicate with StMM by |
| * SetVariable and GetVariable. |
| |
| * @guid: vendor GUID |
| * @data_size: size of EFI variable data |
| * @name_size: size of EFI name |
| * @attr: attributes |
| * @name: variable name |
| * |
| */ |
| struct smm_variable_access { |
| efi_guid_t guid; |
| size_t data_size; |
| size_t name_size; |
| u32 attr; |
| u16 name[]; |
| }; |
| |
| #define MM_VARIABLE_ACCESS_HEADER_SIZE \ |
| (sizeof(struct smm_variable_access)) |
| /** |
| * struct smm_variable_payload_size - Used to get the max allowed |
| * payload used in StMM. |
| * |
| * @size: size to fill in |
| * |
| */ |
| struct smm_variable_payload_size { |
| size_t size; |
| }; |
| |
| /** |
| * struct smm_variable_getnext - Used to communicate with StMM for |
| * GetNextVariableName. |
| * |
| * @guid: vendor GUID |
| * @name_size: size of the name of the variable |
| * @name: variable name |
| * |
| */ |
| struct smm_variable_getnext { |
| efi_guid_t guid; |
| size_t name_size; |
| u16 name[]; |
| }; |
| |
| #define MM_VARIABLE_GET_NEXT_HEADER_SIZE \ |
| (sizeof(struct smm_variable_getnext)) |
| |
| /** |
| * struct smm_variable_query_info - Used to communicate with StMM for |
| * QueryVariableInfo. |
| * |
| * @max_variable_storage: max available storage |
| * @remaining_variable_storage: remaining available storage |
| * @max_variable_size: max variable supported size |
| * @attr: attributes to query storage for |
| * |
| */ |
| struct smm_variable_query_info { |
| u64 max_variable_storage; |
| u64 remaining_variable_storage; |
| u64 max_variable_size; |
| u32 attr; |
| }; |
| |
| #define VAR_CHECK_VARIABLE_PROPERTY_REVISION 0x0001 |
| #define VAR_CHECK_VARIABLE_PROPERTY_READ_ONLY BIT(0) |
| /** |
| * struct var_check_property - Used to store variable properties in StMM |
| * |
| * @revision: magic revision number for variable property checking |
| * @property: properties mask for the variable used in StMM. |
| * Currently RO flag is supported |
| * @attributes: variable attributes used in StMM checking when properties |
| * for a variable are enabled |
| * @minsize: minimum allowed size for variable payload checked against |
| * smm_variable_access->datasize in StMM |
| * @maxsize: maximum allowed size for variable payload checked against |
| * smm_variable_access->datasize in StMM |
| * |
| */ |
| struct var_check_property { |
| u16 revision; |
| u16 property; |
| u32 attributes; |
| size_t minsize; |
| size_t maxsize; |
| }; |
| |
| /** |
| * struct smm_variable_var_check_property - Used to communicate variable |
| * properties with StMM |
| * |
| * @guid: vendor GUID |
| * @name_size: size of EFI name |
| * @property: variable properties struct |
| * @name: variable name |
| * |
| */ |
| struct smm_variable_var_check_property { |
| efi_guid_t guid; |
| size_t name_size; |
| struct var_check_property property; |
| u16 name[]; |
| }; |
| |
| #endif /* _MM_COMMUNICATION_H_ */ |