| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) 2011 David George <david.george@ska.ac.za> |
| * |
| * based on adm1021.c |
| * some credit to Christoph Scheurer, but largely a rewrite |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/bits.h> |
| #include <linux/err.h> |
| #include <linux/hwmon.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| /* Addresses to scan */ |
| static const unsigned short max1668_addr_list[] = { |
| 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; |
| |
| /* max1668 registers */ |
| |
| #define MAX1668_REG_TEMP(nr) (nr) |
| #define MAX1668_REG_STAT1 0x05 |
| #define MAX1668_REG_STAT2 0x06 |
| #define MAX1668_REG_MAN_ID 0xfe |
| #define MAX1668_REG_DEV_ID 0xff |
| |
| /* limits */ |
| |
| /* high limits */ |
| #define MAX1668_REG_LIMH(nr) (0x08 + 2 * (nr)) |
| /* read low limits */ |
| #define MAX1668_REG_LIML(nr) (0x09 + 2 * (nr)) |
| |
| /* manufacturer and device ID Constants */ |
| #define MAN_ID_MAXIM 0x4d |
| #define DEV_ID_MAX1668 0x3 |
| #define DEV_ID_MAX1805 0x5 |
| #define DEV_ID_MAX1989 0xb |
| |
| /* read only mode module parameter */ |
| static bool read_only; |
| module_param(read_only, bool, 0); |
| MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); |
| |
| struct max1668_data { |
| struct regmap *regmap; |
| int channels; |
| }; |
| |
| static int max1668_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| struct max1668_data *data = dev_get_drvdata(dev); |
| struct regmap *regmap = data->regmap; |
| u32 regs[2] = { MAX1668_REG_STAT1, MAX1668_REG_TEMP(channel) }; |
| u8 regvals[2]; |
| u32 regval; |
| int ret; |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| ret = regmap_read(regmap, MAX1668_REG_TEMP(channel), ®val); |
| if (ret) |
| return ret; |
| *val = sign_extend32(regval, 7) * 1000; |
| break; |
| case hwmon_temp_min: |
| ret = regmap_read(regmap, MAX1668_REG_LIML(channel), ®val); |
| if (ret) |
| return ret; |
| *val = sign_extend32(regval, 7) * 1000; |
| break; |
| case hwmon_temp_max: |
| ret = regmap_read(regmap, MAX1668_REG_LIMH(channel), ®val); |
| if (ret) |
| return ret; |
| *val = sign_extend32(regval, 7) * 1000; |
| break; |
| case hwmon_temp_min_alarm: |
| ret = regmap_read(regmap, |
| channel ? MAX1668_REG_STAT2 : MAX1668_REG_STAT1, |
| ®val); |
| if (ret) |
| return ret; |
| if (channel) |
| *val = !!(regval & BIT(9 - channel * 2)); |
| else |
| *val = !!(regval & BIT(5)); |
| break; |
| case hwmon_temp_max_alarm: |
| ret = regmap_read(regmap, |
| channel ? MAX1668_REG_STAT2 : MAX1668_REG_STAT1, |
| ®val); |
| if (ret) |
| return ret; |
| if (channel) |
| *val = !!(regval & BIT(8 - channel * 2)); |
| else |
| *val = !!(regval & BIT(6)); |
| break; |
| case hwmon_temp_fault: |
| ret = regmap_multi_reg_read(regmap, regs, regvals, 2); |
| if (ret) |
| return ret; |
| *val = !!((regvals[0] & BIT(4)) && regvals[1] == 127); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| static int max1668_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long val) |
| { |
| struct max1668_data *data = dev_get_drvdata(dev); |
| struct regmap *regmap = data->regmap; |
| |
| val = clamp_val(val / 1000, -128, 127); |
| |
| switch (attr) { |
| case hwmon_temp_min: |
| return regmap_write(regmap, MAX1668_REG_LIML(channel), val); |
| case hwmon_temp_max: |
| return regmap_write(regmap, MAX1668_REG_LIMH(channel), val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t max1668_is_visible(const void *_data, enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| const struct max1668_data *data = _data; |
| |
| if (channel >= data->channels) |
| return 0; |
| |
| switch (attr) { |
| case hwmon_temp_min: |
| case hwmon_temp_max: |
| return read_only ? 0444 : 0644; |
| case hwmon_temp_input: |
| case hwmon_temp_min_alarm: |
| case hwmon_temp_max_alarm: |
| return 0444; |
| case hwmon_temp_fault: |
| if (channel) |
| return 0444; |
| break; |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| static const struct hwmon_channel_info * const max1668_info[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | |
| HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | |
| HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | |
| HWMON_T_FAULT, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | |
| HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | |
| HWMON_T_FAULT, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | |
| HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | |
| HWMON_T_FAULT, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | |
| HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | |
| HWMON_T_FAULT), |
| NULL |
| }; |
| |
| static const struct hwmon_ops max1668_hwmon_ops = { |
| .is_visible = max1668_is_visible, |
| .read = max1668_read, |
| .write = max1668_write, |
| }; |
| |
| static const struct hwmon_chip_info max1668_chip_info = { |
| .ops = &max1668_hwmon_ops, |
| .info = max1668_info, |
| }; |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int max1668_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| const char *type_name; |
| int man_id, dev_id; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| /* Check for unsupported part */ |
| man_id = i2c_smbus_read_byte_data(client, MAX1668_REG_MAN_ID); |
| if (man_id != MAN_ID_MAXIM) |
| return -ENODEV; |
| |
| dev_id = i2c_smbus_read_byte_data(client, MAX1668_REG_DEV_ID); |
| if (dev_id < 0) |
| return -ENODEV; |
| |
| type_name = NULL; |
| if (dev_id == DEV_ID_MAX1668) |
| type_name = "max1668"; |
| else if (dev_id == DEV_ID_MAX1805) |
| type_name = "max1805"; |
| else if (dev_id == DEV_ID_MAX1989) |
| type_name = "max1989"; |
| |
| if (!type_name) |
| return -ENODEV; |
| |
| strscpy(info->type, type_name, I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| /* regmap */ |
| |
| static int max1668_reg_read(void *context, unsigned int reg, unsigned int *val) |
| { |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(context, reg); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret; |
| return 0; |
| } |
| |
| static int max1668_reg_write(void *context, unsigned int reg, unsigned int val) |
| { |
| return i2c_smbus_write_byte_data(context, reg + 11, val); |
| } |
| |
| static bool max1668_regmap_is_volatile(struct device *dev, unsigned int reg) |
| { |
| return reg <= MAX1668_REG_STAT2; |
| } |
| |
| static bool max1668_regmap_is_writeable(struct device *dev, unsigned int reg) |
| { |
| return reg > MAX1668_REG_STAT2 && reg <= MAX1668_REG_LIML(4); |
| } |
| |
| static const struct regmap_config max1668_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .cache_type = REGCACHE_MAPLE, |
| .volatile_reg = max1668_regmap_is_volatile, |
| .writeable_reg = max1668_regmap_is_writeable, |
| }; |
| |
| static const struct regmap_bus max1668_regmap_bus = { |
| .reg_write = max1668_reg_write, |
| .reg_read = max1668_reg_read, |
| }; |
| |
| static int max1668_probe(struct i2c_client *client) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| struct device *dev = &client->dev; |
| struct device *hwmon_dev; |
| struct max1668_data *data; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| data = devm_kzalloc(dev, sizeof(struct max1668_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->regmap = devm_regmap_init(dev, &max1668_regmap_bus, client, |
| &max1668_regmap_config); |
| if (IS_ERR(data->regmap)) |
| return PTR_ERR(data->regmap); |
| |
| data->channels = (uintptr_t)i2c_get_match_data(client); |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, |
| &max1668_chip_info, NULL); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct i2c_device_id max1668_id[] = { |
| { "max1668", 5 }, |
| { "max1805", 3 }, |
| { "max1989", 5 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, max1668_id); |
| |
| /* This is the driver that will be inserted */ |
| static struct i2c_driver max1668_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "max1668", |
| }, |
| .probe = max1668_probe, |
| .id_table = max1668_id, |
| .detect = max1668_detect, |
| .address_list = max1668_addr_list, |
| }; |
| |
| module_i2c_driver(max1668_driver); |
| |
| MODULE_AUTHOR("David George <david.george@ska.ac.za>"); |
| MODULE_DESCRIPTION("MAX1668 remote temperature sensor driver"); |
| MODULE_LICENSE("GPL"); |