| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* Texas Instruments TMP102 SMBus temperature sensor driver |
| * |
| * Copyright (C) 2010 Steven King <sfking@fdwdc.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/device.h> |
| #include <linux/jiffies.h> |
| #include <linux/regmap.h> |
| #include <linux/of.h> |
| |
| #define DRIVER_NAME "tmp102" |
| |
| #define TMP102_TEMP_REG 0x00 |
| #define TMP102_CONF_REG 0x01 |
| /* note: these bit definitions are byte swapped */ |
| #define TMP102_CONF_SD 0x0100 |
| #define TMP102_CONF_TM 0x0200 |
| #define TMP102_CONF_POL 0x0400 |
| #define TMP102_CONF_F0 0x0800 |
| #define TMP102_CONF_F1 0x1000 |
| #define TMP102_CONF_R0 0x2000 |
| #define TMP102_CONF_R1 0x4000 |
| #define TMP102_CONF_OS 0x8000 |
| #define TMP102_CONF_EM 0x0010 |
| #define TMP102_CONF_AL 0x0020 |
| #define TMP102_CONF_CR0 0x0040 |
| #define TMP102_CONF_CR1 0x0080 |
| #define TMP102_TLOW_REG 0x02 |
| #define TMP102_THIGH_REG 0x03 |
| |
| #define TMP102_CONFREG_MASK (TMP102_CONF_SD | TMP102_CONF_TM | \ |
| TMP102_CONF_POL | TMP102_CONF_F0 | \ |
| TMP102_CONF_F1 | TMP102_CONF_OS | \ |
| TMP102_CONF_EM | TMP102_CONF_AL | \ |
| TMP102_CONF_CR0 | TMP102_CONF_CR1) |
| |
| #define TMP102_CONFIG_CLEAR (TMP102_CONF_SD | TMP102_CONF_OS | \ |
| TMP102_CONF_CR0) |
| #define TMP102_CONFIG_SET (TMP102_CONF_TM | TMP102_CONF_EM | \ |
| TMP102_CONF_CR1) |
| |
| #define CONVERSION_TIME_MS 35 /* in milli-seconds */ |
| |
| struct tmp102 { |
| struct regmap *regmap; |
| u16 config_orig; |
| unsigned long ready_time; |
| }; |
| |
| /* convert left adjusted 13-bit TMP102 register value to milliCelsius */ |
| static inline int tmp102_reg_to_mC(s16 val) |
| { |
| return ((val & ~0x01) * 1000) / 128; |
| } |
| |
| /* convert milliCelsius to left adjusted 13-bit TMP102 register value */ |
| static inline u16 tmp102_mC_to_reg(int val) |
| { |
| return (val * 128) / 1000; |
| } |
| |
| static int tmp102_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *temp) |
| { |
| struct tmp102 *tmp102 = dev_get_drvdata(dev); |
| unsigned int regval; |
| int err, reg; |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| /* Is it too early to return a conversion ? */ |
| if (time_before(jiffies, tmp102->ready_time)) { |
| dev_dbg(dev, "%s: Conversion not ready yet..\n", __func__); |
| return -EAGAIN; |
| } |
| reg = TMP102_TEMP_REG; |
| break; |
| case hwmon_temp_max_hyst: |
| reg = TMP102_TLOW_REG; |
| break; |
| case hwmon_temp_max: |
| reg = TMP102_THIGH_REG; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| err = regmap_read(tmp102->regmap, reg, ®val); |
| if (err < 0) |
| return err; |
| *temp = tmp102_reg_to_mC(regval); |
| |
| return 0; |
| } |
| |
| static int tmp102_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long temp) |
| { |
| struct tmp102 *tmp102 = dev_get_drvdata(dev); |
| int reg; |
| |
| switch (attr) { |
| case hwmon_temp_max_hyst: |
| reg = TMP102_TLOW_REG; |
| break; |
| case hwmon_temp_max: |
| reg = TMP102_THIGH_REG; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| temp = clamp_val(temp, -256000, 255000); |
| return regmap_write(tmp102->regmap, reg, tmp102_mC_to_reg(temp)); |
| } |
| |
| static umode_t tmp102_is_visible(const void *data, enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| if (type != hwmon_temp) |
| return 0; |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| return 0444; |
| case hwmon_temp_max_hyst: |
| case hwmon_temp_max: |
| return 0644; |
| default: |
| return 0; |
| } |
| } |
| |
| static const struct hwmon_channel_info * const tmp102_info[] = { |
| HWMON_CHANNEL_INFO(chip, |
| HWMON_C_REGISTER_TZ), |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST), |
| NULL |
| }; |
| |
| static const struct hwmon_ops tmp102_hwmon_ops = { |
| .is_visible = tmp102_is_visible, |
| .read = tmp102_read, |
| .write = tmp102_write, |
| }; |
| |
| static const struct hwmon_chip_info tmp102_chip_info = { |
| .ops = &tmp102_hwmon_ops, |
| .info = tmp102_info, |
| }; |
| |
| static void tmp102_restore_config(void *data) |
| { |
| struct tmp102 *tmp102 = data; |
| |
| regmap_write(tmp102->regmap, TMP102_CONF_REG, tmp102->config_orig); |
| } |
| |
| static bool tmp102_is_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| return reg != TMP102_TEMP_REG; |
| } |
| |
| static bool tmp102_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| return reg == TMP102_TEMP_REG; |
| } |
| |
| static const struct regmap_config tmp102_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 16, |
| .max_register = TMP102_THIGH_REG, |
| .writeable_reg = tmp102_is_writeable_reg, |
| .volatile_reg = tmp102_is_volatile_reg, |
| .val_format_endian = REGMAP_ENDIAN_BIG, |
| .cache_type = REGCACHE_MAPLE, |
| .use_single_read = true, |
| .use_single_write = true, |
| }; |
| |
| static int tmp102_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct device *hwmon_dev; |
| struct tmp102 *tmp102; |
| unsigned int regval; |
| int err; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_WORD_DATA)) { |
| dev_err(dev, |
| "adapter doesn't support SMBus word transactions\n"); |
| return -ENODEV; |
| } |
| |
| tmp102 = devm_kzalloc(dev, sizeof(*tmp102), GFP_KERNEL); |
| if (!tmp102) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, tmp102); |
| |
| tmp102->regmap = devm_regmap_init_i2c(client, &tmp102_regmap_config); |
| if (IS_ERR(tmp102->regmap)) |
| return PTR_ERR(tmp102->regmap); |
| |
| err = regmap_read(tmp102->regmap, TMP102_CONF_REG, ®val); |
| if (err < 0) { |
| dev_err(dev, "error reading config register\n"); |
| return err; |
| } |
| |
| if ((regval & ~TMP102_CONFREG_MASK) != |
| (TMP102_CONF_R0 | TMP102_CONF_R1)) { |
| dev_err(dev, "unexpected config register value\n"); |
| return -ENODEV; |
| } |
| |
| tmp102->config_orig = regval; |
| |
| err = devm_add_action_or_reset(dev, tmp102_restore_config, tmp102); |
| if (err) |
| return err; |
| |
| regval &= ~TMP102_CONFIG_CLEAR; |
| regval |= TMP102_CONFIG_SET; |
| |
| err = regmap_write(tmp102->regmap, TMP102_CONF_REG, regval); |
| if (err < 0) { |
| dev_err(dev, "error writing config register\n"); |
| return err; |
| } |
| |
| /* |
| * Mark that we are not ready with data until the first |
| * conversion is complete |
| */ |
| tmp102->ready_time = jiffies + msecs_to_jiffies(CONVERSION_TIME_MS); |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, |
| tmp102, |
| &tmp102_chip_info, |
| NULL); |
| if (IS_ERR(hwmon_dev)) { |
| dev_dbg(dev, "unable to register hwmon device\n"); |
| return PTR_ERR(hwmon_dev); |
| } |
| dev_info(dev, "initialized\n"); |
| |
| return 0; |
| } |
| |
| static int tmp102_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct tmp102 *tmp102 = i2c_get_clientdata(client); |
| |
| return regmap_update_bits(tmp102->regmap, TMP102_CONF_REG, |
| TMP102_CONF_SD, TMP102_CONF_SD); |
| } |
| |
| static int tmp102_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct tmp102 *tmp102 = i2c_get_clientdata(client); |
| int err; |
| |
| err = regmap_update_bits(tmp102->regmap, TMP102_CONF_REG, |
| TMP102_CONF_SD, 0); |
| |
| tmp102->ready_time = jiffies + msecs_to_jiffies(CONVERSION_TIME_MS); |
| |
| return err; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(tmp102_dev_pm_ops, tmp102_suspend, tmp102_resume); |
| |
| static const struct i2c_device_id tmp102_id[] = { |
| { "tmp102" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tmp102_id); |
| |
| static const struct of_device_id __maybe_unused tmp102_of_match[] = { |
| { .compatible = "ti,tmp102" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, tmp102_of_match); |
| |
| static struct i2c_driver tmp102_driver = { |
| .driver.name = DRIVER_NAME, |
| .driver.of_match_table = of_match_ptr(tmp102_of_match), |
| .driver.pm = pm_sleep_ptr(&tmp102_dev_pm_ops), |
| .probe = tmp102_probe, |
| .id_table = tmp102_id, |
| }; |
| |
| module_i2c_driver(tmp102_driver); |
| |
| MODULE_AUTHOR("Steven King <sfking@fdwdc.com>"); |
| MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver"); |
| MODULE_LICENSE("GPL"); |