| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * cec-core.c - HDMI Consumer Electronics Control framework - Core |
| * |
| * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/kmod.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| |
| #include "cec-priv.h" |
| |
| #define CEC_NUM_DEVICES 256 |
| #define CEC_NAME "cec" |
| |
| /* |
| * 400 ms is the time it takes for one 16 byte message to be |
| * transferred and 5 is the maximum number of retries. Add |
| * another 100 ms as a margin. So if the transmit doesn't |
| * finish before that time something is really wrong and we |
| * have to time out. |
| * |
| * This is a sign that something it really wrong and a warning |
| * will be issued. |
| */ |
| #define CEC_XFER_TIMEOUT_MS (5 * 400 + 100) |
| |
| int cec_debug; |
| module_param_named(debug, cec_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "debug level (0-2)"); |
| |
| static bool debug_phys_addr; |
| module_param(debug_phys_addr, bool, 0644); |
| MODULE_PARM_DESC(debug_phys_addr, "add CEC_CAP_PHYS_ADDR if set"); |
| |
| static dev_t cec_dev_t; |
| |
| /* Active devices */ |
| static DEFINE_MUTEX(cec_devnode_lock); |
| static DECLARE_BITMAP(cec_devnode_nums, CEC_NUM_DEVICES); |
| |
| static struct dentry *top_cec_dir; |
| |
| /* dev to cec_devnode */ |
| #define to_cec_devnode(cd) container_of(cd, struct cec_devnode, dev) |
| |
| /* Called when the last user of the cec device exits. */ |
| static void cec_devnode_release(struct device *cd) |
| { |
| struct cec_devnode *devnode = to_cec_devnode(cd); |
| |
| mutex_lock(&cec_devnode_lock); |
| /* Mark device node number as free */ |
| clear_bit(devnode->minor, cec_devnode_nums); |
| mutex_unlock(&cec_devnode_lock); |
| |
| cec_delete_adapter(to_cec_adapter(devnode)); |
| } |
| |
| static const struct bus_type cec_bus_type = { |
| .name = CEC_NAME, |
| }; |
| |
| /* |
| * Register a cec device node |
| * |
| * The registration code assigns minor numbers and registers the new device node |
| * with the kernel. An error is returned if no free minor number can be found, |
| * or if the registration of the device node fails. |
| * |
| * Zero is returned on success. |
| * |
| * Note that if the cec_devnode_register call fails, the release() callback of |
| * the cec_devnode structure is *not* called, so the caller is responsible for |
| * freeing any data. |
| */ |
| static int __must_check cec_devnode_register(struct cec_devnode *devnode, |
| struct module *owner) |
| { |
| int minor; |
| int ret; |
| |
| /* Part 1: Find a free minor number */ |
| mutex_lock(&cec_devnode_lock); |
| minor = find_first_zero_bit(cec_devnode_nums, CEC_NUM_DEVICES); |
| if (minor == CEC_NUM_DEVICES) { |
| mutex_unlock(&cec_devnode_lock); |
| pr_err("could not get a free minor\n"); |
| return -ENFILE; |
| } |
| |
| set_bit(minor, cec_devnode_nums); |
| mutex_unlock(&cec_devnode_lock); |
| |
| devnode->minor = minor; |
| devnode->dev.bus = &cec_bus_type; |
| devnode->dev.devt = MKDEV(MAJOR(cec_dev_t), minor); |
| devnode->dev.release = cec_devnode_release; |
| dev_set_name(&devnode->dev, "cec%d", devnode->minor); |
| device_initialize(&devnode->dev); |
| |
| /* Part 2: Initialize and register the character device */ |
| cdev_init(&devnode->cdev, &cec_devnode_fops); |
| devnode->cdev.owner = owner; |
| kobject_set_name(&devnode->cdev.kobj, "cec%d", devnode->minor); |
| |
| devnode->registered = true; |
| ret = cdev_device_add(&devnode->cdev, &devnode->dev); |
| if (ret) { |
| devnode->registered = false; |
| pr_err("%s: cdev_device_add failed\n", __func__); |
| goto clr_bit; |
| } |
| |
| return 0; |
| |
| clr_bit: |
| mutex_lock(&cec_devnode_lock); |
| clear_bit(devnode->minor, cec_devnode_nums); |
| mutex_unlock(&cec_devnode_lock); |
| return ret; |
| } |
| |
| /* |
| * Unregister a cec device node |
| * |
| * This unregisters the passed device. Future open calls will be met with |
| * errors. |
| * |
| * This function can safely be called if the device node has never been |
| * registered or has already been unregistered. |
| */ |
| static void cec_devnode_unregister(struct cec_adapter *adap) |
| { |
| struct cec_devnode *devnode = &adap->devnode; |
| struct cec_fh *fh; |
| |
| mutex_lock(&devnode->lock); |
| |
| /* Check if devnode was never registered or already unregistered */ |
| if (!devnode->registered || devnode->unregistered) { |
| mutex_unlock(&devnode->lock); |
| return; |
| } |
| devnode->registered = false; |
| devnode->unregistered = true; |
| |
| mutex_lock(&devnode->lock_fhs); |
| list_for_each_entry(fh, &devnode->fhs, list) |
| wake_up_interruptible(&fh->wait); |
| mutex_unlock(&devnode->lock_fhs); |
| |
| mutex_unlock(&devnode->lock); |
| |
| mutex_lock(&adap->lock); |
| __cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false); |
| __cec_s_log_addrs(adap, NULL, false); |
| // Disable the adapter (since adap->devnode.unregistered is true) |
| cec_adap_enable(adap); |
| mutex_unlock(&adap->lock); |
| |
| cdev_device_del(&devnode->cdev, &devnode->dev); |
| put_device(&devnode->dev); |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| static ssize_t cec_error_inj_write(struct file *file, |
| const char __user *ubuf, size_t count, loff_t *ppos) |
| { |
| struct seq_file *sf = file->private_data; |
| struct cec_adapter *adap = sf->private; |
| char *buf; |
| char *line; |
| char *p; |
| |
| buf = memdup_user_nul(ubuf, min_t(size_t, PAGE_SIZE, count)); |
| if (IS_ERR(buf)) |
| return PTR_ERR(buf); |
| p = buf; |
| while (p && *p) { |
| p = skip_spaces(p); |
| line = strsep(&p, "\n"); |
| if (!*line || *line == '#') |
| continue; |
| if (!call_op(adap, error_inj_parse_line, line)) { |
| kfree(buf); |
| return -EINVAL; |
| } |
| } |
| kfree(buf); |
| return count; |
| } |
| |
| static int cec_error_inj_show(struct seq_file *sf, void *unused) |
| { |
| struct cec_adapter *adap = sf->private; |
| |
| return call_op(adap, error_inj_show, sf); |
| } |
| |
| static int cec_error_inj_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, cec_error_inj_show, inode->i_private); |
| } |
| |
| static const struct file_operations cec_error_inj_fops = { |
| .open = cec_error_inj_open, |
| .write = cec_error_inj_write, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| #endif |
| |
| struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, |
| void *priv, const char *name, u32 caps, |
| u8 available_las) |
| { |
| struct cec_adapter *adap; |
| int res; |
| |
| #ifndef CONFIG_MEDIA_CEC_RC |
| caps &= ~CEC_CAP_RC; |
| #endif |
| |
| if (WARN_ON(!caps)) |
| return ERR_PTR(-EINVAL); |
| if (WARN_ON(!ops)) |
| return ERR_PTR(-EINVAL); |
| if (WARN_ON(!available_las || available_las > CEC_MAX_LOG_ADDRS)) |
| return ERR_PTR(-EINVAL); |
| adap = kzalloc(sizeof(*adap), GFP_KERNEL); |
| if (!adap) |
| return ERR_PTR(-ENOMEM); |
| strscpy(adap->name, name, sizeof(adap->name)); |
| adap->phys_addr = CEC_PHYS_ADDR_INVALID; |
| adap->cec_pin_is_high = true; |
| adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0; |
| adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE; |
| adap->capabilities = caps | CEC_CAP_REPLY_VENDOR_ID; |
| if (debug_phys_addr) |
| adap->capabilities |= CEC_CAP_PHYS_ADDR; |
| adap->needs_hpd = caps & CEC_CAP_NEEDS_HPD; |
| adap->available_log_addrs = available_las; |
| adap->sequence = 0; |
| adap->ops = ops; |
| adap->priv = priv; |
| mutex_init(&adap->lock); |
| INIT_LIST_HEAD(&adap->transmit_queue); |
| INIT_LIST_HEAD(&adap->wait_queue); |
| init_waitqueue_head(&adap->kthread_waitq); |
| |
| /* adap->devnode initialization */ |
| INIT_LIST_HEAD(&adap->devnode.fhs); |
| mutex_init(&adap->devnode.lock_fhs); |
| mutex_init(&adap->devnode.lock); |
| |
| adap->kthread = kthread_run(cec_thread_func, adap, "cec-%s", name); |
| if (IS_ERR(adap->kthread)) { |
| pr_err("cec-%s: kernel_thread() failed\n", name); |
| res = PTR_ERR(adap->kthread); |
| kfree(adap); |
| return ERR_PTR(res); |
| } |
| |
| #ifdef CONFIG_MEDIA_CEC_RC |
| if (!(caps & CEC_CAP_RC)) |
| return adap; |
| |
| /* Prepare the RC input device */ |
| adap->rc = rc_allocate_device(RC_DRIVER_SCANCODE); |
| if (!adap->rc) { |
| pr_err("cec-%s: failed to allocate memory for rc_dev\n", |
| name); |
| kthread_stop(adap->kthread); |
| kfree(adap); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| snprintf(adap->input_phys, sizeof(adap->input_phys), |
| "%s/input0", adap->name); |
| |
| adap->rc->device_name = adap->name; |
| adap->rc->input_phys = adap->input_phys; |
| adap->rc->input_id.bustype = BUS_CEC; |
| adap->rc->input_id.vendor = 0; |
| adap->rc->input_id.product = 0; |
| adap->rc->input_id.version = 1; |
| adap->rc->driver_name = CEC_NAME; |
| adap->rc->allowed_protocols = RC_PROTO_BIT_CEC; |
| adap->rc->priv = adap; |
| adap->rc->map_name = RC_MAP_CEC; |
| adap->rc->timeout = MS_TO_US(550); |
| #endif |
| return adap; |
| } |
| EXPORT_SYMBOL_GPL(cec_allocate_adapter); |
| |
| int cec_register_adapter(struct cec_adapter *adap, |
| struct device *parent) |
| { |
| int res; |
| |
| if (IS_ERR_OR_NULL(adap)) |
| return 0; |
| |
| if (WARN_ON(!parent)) |
| return -EINVAL; |
| |
| adap->owner = parent->driver->owner; |
| adap->devnode.dev.parent = parent; |
| if (!adap->xfer_timeout_ms) |
| adap->xfer_timeout_ms = CEC_XFER_TIMEOUT_MS; |
| |
| #ifdef CONFIG_MEDIA_CEC_RC |
| if (adap->capabilities & CEC_CAP_RC) { |
| adap->rc->dev.parent = parent; |
| res = rc_register_device(adap->rc); |
| |
| if (res) { |
| pr_err("cec-%s: failed to prepare input device\n", |
| adap->name); |
| rc_free_device(adap->rc); |
| adap->rc = NULL; |
| return res; |
| } |
| } |
| #endif |
| |
| res = cec_devnode_register(&adap->devnode, adap->owner); |
| if (res) { |
| #ifdef CONFIG_MEDIA_CEC_RC |
| /* Note: rc_unregister also calls rc_free */ |
| rc_unregister_device(adap->rc); |
| adap->rc = NULL; |
| #endif |
| return res; |
| } |
| |
| dev_set_drvdata(&adap->devnode.dev, adap); |
| #ifdef CONFIG_DEBUG_FS |
| if (!top_cec_dir) |
| return 0; |
| |
| adap->cec_dir = debugfs_create_dir(dev_name(&adap->devnode.dev), |
| top_cec_dir); |
| |
| debugfs_create_devm_seqfile(&adap->devnode.dev, "status", adap->cec_dir, |
| cec_adap_status); |
| |
| if (!adap->ops->error_inj_show || !adap->ops->error_inj_parse_line) |
| return 0; |
| debugfs_create_file("error-inj", 0644, adap->cec_dir, adap, |
| &cec_error_inj_fops); |
| #endif |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(cec_register_adapter); |
| |
| void cec_unregister_adapter(struct cec_adapter *adap) |
| { |
| if (IS_ERR_OR_NULL(adap)) |
| return; |
| |
| #ifdef CONFIG_MEDIA_CEC_RC |
| /* Note: rc_unregister also calls rc_free */ |
| rc_unregister_device(adap->rc); |
| adap->rc = NULL; |
| #endif |
| debugfs_remove_recursive(adap->cec_dir); |
| #ifdef CONFIG_CEC_NOTIFIER |
| cec_notifier_cec_adap_unregister(adap->notifier, adap); |
| #endif |
| cec_devnode_unregister(adap); |
| } |
| EXPORT_SYMBOL_GPL(cec_unregister_adapter); |
| |
| void cec_delete_adapter(struct cec_adapter *adap) |
| { |
| if (IS_ERR_OR_NULL(adap)) |
| return; |
| if (adap->kthread_config) |
| kthread_stop(adap->kthread_config); |
| kthread_stop(adap->kthread); |
| if (adap->ops->adap_free) |
| adap->ops->adap_free(adap); |
| #ifdef CONFIG_MEDIA_CEC_RC |
| rc_free_device(adap->rc); |
| #endif |
| kfree(adap); |
| } |
| EXPORT_SYMBOL_GPL(cec_delete_adapter); |
| |
| /* |
| * Initialise cec for linux |
| */ |
| static int __init cec_devnode_init(void) |
| { |
| int ret = alloc_chrdev_region(&cec_dev_t, 0, CEC_NUM_DEVICES, CEC_NAME); |
| |
| if (ret < 0) { |
| pr_warn("cec: unable to allocate major\n"); |
| return ret; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| top_cec_dir = debugfs_create_dir("cec", NULL); |
| if (IS_ERR_OR_NULL(top_cec_dir)) { |
| pr_warn("cec: Failed to create debugfs cec dir\n"); |
| top_cec_dir = NULL; |
| } |
| #endif |
| |
| ret = bus_register(&cec_bus_type); |
| if (ret < 0) { |
| unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES); |
| pr_warn("cec: bus_register failed\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit cec_devnode_exit(void) |
| { |
| debugfs_remove_recursive(top_cec_dir); |
| bus_unregister(&cec_bus_type); |
| unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES); |
| } |
| |
| subsys_initcall(cec_devnode_init); |
| module_exit(cec_devnode_exit) |
| |
| MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>"); |
| MODULE_DESCRIPTION("Device node registration for cec drivers"); |
| MODULE_LICENSE("GPL"); |