| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/fs.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/blkdev.h> |
| #include <linux/module.h> |
| #include <linux/blkpg.h> |
| #include <linux/cdrom.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <asm/io.h> |
| #include <linux/uaccess.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_ioctl.h> |
| #include <scsi/scsi_cmnd.h> |
| |
| #include "sr.h" |
| |
| #if 0 |
| #define DEBUG |
| #endif |
| |
| /* The sr_is_xa() seems to trigger firmware bugs with some drives :-( |
| * It is off by default and can be turned on with this module parameter */ |
| static int xa_test = 0; |
| |
| module_param(xa_test, int, S_IRUGO | S_IWUSR); |
| |
| static int sr_read_tochdr(struct cdrom_device_info *cdi, |
| struct cdrom_tochdr *tochdr) |
| { |
| struct scsi_cd *cd = cdi->handle; |
| struct packet_command cgc; |
| int result; |
| unsigned char *buffer; |
| |
| buffer = kzalloc(32, GFP_KERNEL); |
| if (!buffer) |
| return -ENOMEM; |
| |
| memset(&cgc, 0, sizeof(struct packet_command)); |
| cgc.timeout = IOCTL_TIMEOUT; |
| cgc.cmd[0] = GPCMD_READ_TOC_PMA_ATIP; |
| cgc.cmd[8] = 12; /* LSB of length */ |
| cgc.buffer = buffer; |
| cgc.buflen = 12; |
| cgc.quiet = 1; |
| cgc.data_direction = DMA_FROM_DEVICE; |
| |
| result = sr_do_ioctl(cd, &cgc); |
| if (result) |
| goto err; |
| |
| tochdr->cdth_trk0 = buffer[2]; |
| tochdr->cdth_trk1 = buffer[3]; |
| |
| err: |
| kfree(buffer); |
| return result; |
| } |
| |
| static int sr_read_tocentry(struct cdrom_device_info *cdi, |
| struct cdrom_tocentry *tocentry) |
| { |
| struct scsi_cd *cd = cdi->handle; |
| struct packet_command cgc; |
| int result; |
| unsigned char *buffer; |
| |
| buffer = kzalloc(32, GFP_KERNEL); |
| if (!buffer) |
| return -ENOMEM; |
| |
| memset(&cgc, 0, sizeof(struct packet_command)); |
| cgc.timeout = IOCTL_TIMEOUT; |
| cgc.cmd[0] = GPCMD_READ_TOC_PMA_ATIP; |
| cgc.cmd[1] |= (tocentry->cdte_format == CDROM_MSF) ? 0x02 : 0; |
| cgc.cmd[6] = tocentry->cdte_track; |
| cgc.cmd[8] = 12; /* LSB of length */ |
| cgc.buffer = buffer; |
| cgc.buflen = 12; |
| cgc.data_direction = DMA_FROM_DEVICE; |
| |
| result = sr_do_ioctl(cd, &cgc); |
| if (result) |
| goto err; |
| |
| tocentry->cdte_ctrl = buffer[5] & 0xf; |
| tocentry->cdte_adr = buffer[5] >> 4; |
| tocentry->cdte_datamode = (tocentry->cdte_ctrl & 0x04) ? 1 : 0; |
| if (tocentry->cdte_format == CDROM_MSF) { |
| tocentry->cdte_addr.msf.minute = buffer[9]; |
| tocentry->cdte_addr.msf.second = buffer[10]; |
| tocentry->cdte_addr.msf.frame = buffer[11]; |
| } else |
| tocentry->cdte_addr.lba = (((((buffer[8] << 8) + buffer[9]) << 8) |
| + buffer[10]) << 8) + buffer[11]; |
| |
| err: |
| kfree(buffer); |
| return result; |
| } |
| |
| #define IOCTL_RETRIES 3 |
| |
| /* ATAPI drives don't have a SCMD_PLAYAUDIO_TI command. When these drives |
| are emulating a SCSI device via the idescsi module, they need to have |
| CDROMPLAYTRKIND commands translated into CDROMPLAYMSF commands for them */ |
| |
| static int sr_fake_playtrkind(struct cdrom_device_info *cdi, struct cdrom_ti *ti) |
| { |
| struct cdrom_tocentry trk0_te, trk1_te; |
| struct cdrom_tochdr tochdr; |
| struct packet_command cgc; |
| int ntracks, ret; |
| |
| ret = sr_read_tochdr(cdi, &tochdr); |
| if (ret) |
| return ret; |
| |
| ntracks = tochdr.cdth_trk1 - tochdr.cdth_trk0 + 1; |
| |
| if (ti->cdti_trk1 == ntracks) |
| ti->cdti_trk1 = CDROM_LEADOUT; |
| else if (ti->cdti_trk1 != CDROM_LEADOUT) |
| ti->cdti_trk1 ++; |
| |
| trk0_te.cdte_track = ti->cdti_trk0; |
| trk0_te.cdte_format = CDROM_MSF; |
| trk1_te.cdte_track = ti->cdti_trk1; |
| trk1_te.cdte_format = CDROM_MSF; |
| |
| ret = sr_read_tocentry(cdi, &trk0_te); |
| if (ret) |
| return ret; |
| ret = sr_read_tocentry(cdi, &trk1_te); |
| if (ret) |
| return ret; |
| |
| memset(&cgc, 0, sizeof(struct packet_command)); |
| cgc.cmd[0] = GPCMD_PLAY_AUDIO_MSF; |
| cgc.cmd[3] = trk0_te.cdte_addr.msf.minute; |
| cgc.cmd[4] = trk0_te.cdte_addr.msf.second; |
| cgc.cmd[5] = trk0_te.cdte_addr.msf.frame; |
| cgc.cmd[6] = trk1_te.cdte_addr.msf.minute; |
| cgc.cmd[7] = trk1_te.cdte_addr.msf.second; |
| cgc.cmd[8] = trk1_te.cdte_addr.msf.frame; |
| cgc.data_direction = DMA_NONE; |
| cgc.timeout = IOCTL_TIMEOUT; |
| return sr_do_ioctl(cdi->handle, &cgc); |
| } |
| |
| static int sr_play_trkind(struct cdrom_device_info *cdi, |
| struct cdrom_ti *ti) |
| |
| { |
| struct scsi_cd *cd = cdi->handle; |
| struct packet_command cgc; |
| int result; |
| |
| memset(&cgc, 0, sizeof(struct packet_command)); |
| cgc.timeout = IOCTL_TIMEOUT; |
| cgc.cmd[0] = GPCMD_PLAYAUDIO_TI; |
| cgc.cmd[4] = ti->cdti_trk0; |
| cgc.cmd[5] = ti->cdti_ind0; |
| cgc.cmd[7] = ti->cdti_trk1; |
| cgc.cmd[8] = ti->cdti_ind1; |
| cgc.data_direction = DMA_NONE; |
| |
| result = sr_do_ioctl(cd, &cgc); |
| if (result == -EDRIVE_CANT_DO_THIS) |
| result = sr_fake_playtrkind(cdi, ti); |
| |
| return result; |
| } |
| |
| /* We do our own retries because we want to know what the specific |
| error code is. Normally the UNIT_ATTENTION code will automatically |
| clear after one error */ |
| |
| int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) |
| { |
| struct scsi_device *SDev; |
| struct scsi_sense_hdr local_sshdr, *sshdr; |
| int result, err = 0, retries = 0; |
| const struct scsi_exec_args exec_args = { |
| .sshdr = cgc->sshdr ? : &local_sshdr, |
| }; |
| |
| SDev = cd->device; |
| |
| sshdr = exec_args.sshdr; |
| |
| retry: |
| if (!scsi_block_when_processing_errors(SDev)) { |
| err = -ENODEV; |
| goto out; |
| } |
| |
| result = scsi_execute_cmd(SDev, cgc->cmd, |
| cgc->data_direction == DMA_TO_DEVICE ? |
| REQ_OP_DRV_OUT : REQ_OP_DRV_IN, cgc->buffer, |
| cgc->buflen, cgc->timeout, IOCTL_RETRIES, |
| &exec_args); |
| /* Minimal error checking. Ignore cases we know about, and report the rest. */ |
| if (result < 0) { |
| err = result; |
| goto out; |
| } |
| if (scsi_status_is_check_condition(result)) { |
| switch (sshdr->sense_key) { |
| case UNIT_ATTENTION: |
| SDev->changed = 1; |
| if (!cgc->quiet) |
| sr_printk(KERN_INFO, cd, |
| "disc change detected.\n"); |
| if (retries++ < 10) |
| goto retry; |
| err = -ENOMEDIUM; |
| break; |
| case NOT_READY: /* This happens if there is no disc in drive */ |
| if (sshdr->asc == 0x04 && |
| sshdr->ascq == 0x01) { |
| /* sense: Logical unit is in process of becoming ready */ |
| if (!cgc->quiet) |
| sr_printk(KERN_INFO, cd, |
| "CDROM not ready yet.\n"); |
| if (retries++ < 10) { |
| /* sleep 2 sec and try again */ |
| ssleep(2); |
| goto retry; |
| } else { |
| /* 20 secs are enough? */ |
| err = -ENOMEDIUM; |
| break; |
| } |
| } |
| if (!cgc->quiet) |
| sr_printk(KERN_INFO, cd, |
| "CDROM not ready. Make sure there " |
| "is a disc in the drive.\n"); |
| err = -ENOMEDIUM; |
| break; |
| case ILLEGAL_REQUEST: |
| err = -EIO; |
| if (sshdr->asc == 0x20 && |
| sshdr->ascq == 0x00) |
| /* sense: Invalid command operation code */ |
| err = -EDRIVE_CANT_DO_THIS; |
| break; |
| default: |
| err = -EIO; |
| } |
| } |
| |
| /* Wake up a process waiting for device */ |
| out: |
| cgc->stat = err; |
| return err; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| /* interface to cdrom.c */ |
| |
| int sr_tray_move(struct cdrom_device_info *cdi, int pos) |
| { |
| Scsi_CD *cd = cdi->handle; |
| struct packet_command cgc; |
| |
| memset(&cgc, 0, sizeof(struct packet_command)); |
| cgc.cmd[0] = GPCMD_START_STOP_UNIT; |
| cgc.cmd[4] = (pos == 0) ? 0x03 /* close */ : 0x02 /* eject */ ; |
| cgc.data_direction = DMA_NONE; |
| cgc.timeout = IOCTL_TIMEOUT; |
| return sr_do_ioctl(cd, &cgc); |
| } |
| |
| int sr_lock_door(struct cdrom_device_info *cdi, int lock) |
| { |
| Scsi_CD *cd = cdi->handle; |
| |
| return scsi_set_medium_removal(cd->device, lock ? |
| SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW); |
| } |
| |
| int sr_drive_status(struct cdrom_device_info *cdi, int slot) |
| { |
| struct scsi_cd *cd = cdi->handle; |
| struct scsi_sense_hdr sshdr; |
| struct media_event_desc med; |
| |
| if (CDSL_CURRENT != slot) { |
| /* we have no changer support */ |
| return -EINVAL; |
| } |
| if (!scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr)) |
| return CDS_DISC_OK; |
| |
| /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */ |
| if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY |
| && sshdr.asc == 0x04 && sshdr.ascq == 0x01) |
| return CDS_DRIVE_NOT_READY; |
| |
| if (!cdrom_get_media_event(cdi, &med)) { |
| if (med.media_present) |
| return CDS_DISC_OK; |
| else if (med.door_open) |
| return CDS_TRAY_OPEN; |
| else |
| return CDS_NO_DISC; |
| } |
| |
| /* |
| * SK/ASC/ASCQ of 2/4/2 means "initialization required" |
| * Using CD_TRAY_OPEN results in an START_STOP_UNIT to close |
| * the tray, which resolves the initialization requirement. |
| */ |
| if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY |
| && sshdr.asc == 0x04 && sshdr.ascq == 0x02) |
| return CDS_TRAY_OPEN; |
| |
| /* |
| * 0x04 is format in progress .. but there must be a disc present! |
| */ |
| if (sshdr.sense_key == NOT_READY && sshdr.asc == 0x04) |
| return CDS_DISC_OK; |
| |
| /* |
| * If not using Mt Fuji extended media tray reports, |
| * just return TRAY_OPEN since ATAPI doesn't provide |
| * any other way to detect this... |
| */ |
| if (scsi_sense_valid(&sshdr) && |
| /* 0x3a is medium not present */ |
| sshdr.asc == 0x3a) |
| return CDS_NO_DISC; |
| else |
| return CDS_TRAY_OPEN; |
| |
| return CDS_DRIVE_NOT_READY; |
| } |
| |
| int sr_disk_status(struct cdrom_device_info *cdi) |
| { |
| Scsi_CD *cd = cdi->handle; |
| struct cdrom_tochdr toc_h; |
| struct cdrom_tocentry toc_e; |
| int i, rc, have_datatracks = 0; |
| |
| /* look for data tracks */ |
| rc = sr_read_tochdr(cdi, &toc_h); |
| if (rc) |
| return (rc == -ENOMEDIUM) ? CDS_NO_DISC : CDS_NO_INFO; |
| |
| for (i = toc_h.cdth_trk0; i <= toc_h.cdth_trk1; i++) { |
| toc_e.cdte_track = i; |
| toc_e.cdte_format = CDROM_LBA; |
| if (sr_read_tocentry(cdi, &toc_e)) |
| return CDS_NO_INFO; |
| if (toc_e.cdte_ctrl & CDROM_DATA_TRACK) { |
| have_datatracks = 1; |
| break; |
| } |
| } |
| if (!have_datatracks) |
| return CDS_AUDIO; |
| |
| if (cd->xa_flag) |
| return CDS_XA_2_1; |
| else |
| return CDS_DATA_1; |
| } |
| |
| int sr_get_last_session(struct cdrom_device_info *cdi, |
| struct cdrom_multisession *ms_info) |
| { |
| Scsi_CD *cd = cdi->handle; |
| |
| ms_info->addr.lba = cd->ms_offset; |
| ms_info->xa_flag = cd->xa_flag || cd->ms_offset > 0; |
| |
| return 0; |
| } |
| |
| int sr_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn) |
| { |
| Scsi_CD *cd = cdi->handle; |
| struct packet_command cgc; |
| char *buffer = kzalloc(32, GFP_KERNEL); |
| int result; |
| |
| if (!buffer) |
| return -ENOMEM; |
| |
| memset(&cgc, 0, sizeof(struct packet_command)); |
| cgc.cmd[0] = GPCMD_READ_SUBCHANNEL; |
| cgc.cmd[2] = 0x40; /* I do want the subchannel info */ |
| cgc.cmd[3] = 0x02; /* Give me medium catalog number info */ |
| cgc.cmd[8] = 24; |
| cgc.buffer = buffer; |
| cgc.buflen = 24; |
| cgc.data_direction = DMA_FROM_DEVICE; |
| cgc.timeout = IOCTL_TIMEOUT; |
| result = sr_do_ioctl(cd, &cgc); |
| if (result) |
| goto err; |
| |
| memcpy(mcn->medium_catalog_number, buffer + 9, 13); |
| mcn->medium_catalog_number[13] = 0; |
| |
| err: |
| kfree(buffer); |
| return result; |
| } |
| |
| int sr_reset(struct cdrom_device_info *cdi) |
| { |
| return 0; |
| } |
| |
| int sr_select_speed(struct cdrom_device_info *cdi, unsigned long speed) |
| { |
| Scsi_CD *cd = cdi->handle; |
| struct packet_command cgc; |
| |
| /* avoid exceeding the max speed or overflowing integer bounds */ |
| speed = clamp(speed, 0, 0xffff / 177); |
| |
| if (speed == 0) |
| speed = 0xffff; /* set to max */ |
| else |
| speed *= 177; /* Nx to kbyte/s */ |
| |
| memset(&cgc, 0, sizeof(struct packet_command)); |
| cgc.cmd[0] = GPCMD_SET_SPEED; /* SET CD SPEED */ |
| cgc.cmd[2] = (speed >> 8) & 0xff; /* MSB for speed (in kbytes/sec) */ |
| cgc.cmd[3] = speed & 0xff; /* LSB */ |
| cgc.data_direction = DMA_NONE; |
| cgc.timeout = IOCTL_TIMEOUT; |
| |
| if (sr_do_ioctl(cd, &cgc)) |
| return -EIO; |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* this is called by the generic cdrom driver. arg is a _kernel_ pointer, */ |
| /* because the generic cdrom driver does the user access stuff for us. */ |
| /* only cdromreadtochdr and cdromreadtocentry are left - for use with the */ |
| /* sr_disk_status interface for the generic cdrom driver. */ |
| |
| int sr_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd, void *arg) |
| { |
| switch (cmd) { |
| case CDROMREADTOCHDR: |
| return sr_read_tochdr(cdi, arg); |
| case CDROMREADTOCENTRY: |
| return sr_read_tocentry(cdi, arg); |
| case CDROMPLAYTRKIND: |
| return sr_play_trkind(cdi, arg); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /* ----------------------------------------------------------------------- |
| * a function to read all sorts of funny cdrom sectors using the READ_CD |
| * scsi-3 mmc command |
| * |
| * lba: linear block address |
| * format: 0 = data (anything) |
| * 1 = audio |
| * 2 = data (mode 1) |
| * 3 = data (mode 2) |
| * 4 = data (mode 2 form1) |
| * 5 = data (mode 2 form2) |
| * blksize: 2048 | 2336 | 2340 | 2352 |
| */ |
| |
| static int sr_read_cd(Scsi_CD *cd, unsigned char *dest, int lba, int format, int blksize) |
| { |
| struct packet_command cgc; |
| |
| #ifdef DEBUG |
| sr_printk(KERN_INFO, cd, "sr_read_cd lba=%d format=%d blksize=%d\n", |
| lba, format, blksize); |
| #endif |
| |
| memset(&cgc, 0, sizeof(struct packet_command)); |
| cgc.cmd[0] = GPCMD_READ_CD; /* READ_CD */ |
| cgc.cmd[1] = ((format & 7) << 2); |
| cgc.cmd[2] = (unsigned char) (lba >> 24) & 0xff; |
| cgc.cmd[3] = (unsigned char) (lba >> 16) & 0xff; |
| cgc.cmd[4] = (unsigned char) (lba >> 8) & 0xff; |
| cgc.cmd[5] = (unsigned char) lba & 0xff; |
| cgc.cmd[8] = 1; |
| switch (blksize) { |
| case 2336: |
| cgc.cmd[9] = 0x58; |
| break; |
| case 2340: |
| cgc.cmd[9] = 0x78; |
| break; |
| case 2352: |
| cgc.cmd[9] = 0xf8; |
| break; |
| default: |
| cgc.cmd[9] = 0x10; |
| break; |
| } |
| cgc.buffer = dest; |
| cgc.buflen = blksize; |
| cgc.data_direction = DMA_FROM_DEVICE; |
| cgc.timeout = IOCTL_TIMEOUT; |
| return sr_do_ioctl(cd, &cgc); |
| } |
| |
| /* |
| * read sectors with blocksizes other than 2048 |
| */ |
| |
| static int sr_read_sector(Scsi_CD *cd, int lba, int blksize, unsigned char *dest) |
| { |
| struct packet_command cgc; |
| int rc; |
| |
| /* we try the READ CD command first... */ |
| if (cd->readcd_known) { |
| rc = sr_read_cd(cd, dest, lba, 0, blksize); |
| if (-EDRIVE_CANT_DO_THIS != rc) |
| return rc; |
| cd->readcd_known = 0; |
| sr_printk(KERN_INFO, cd, |
| "CDROM doesn't support READ CD (0xbe) command\n"); |
| /* fall & retry the other way */ |
| } |
| /* ... if this fails, we switch the blocksize using MODE SELECT */ |
| if (blksize != cd->device->sector_size) { |
| if (0 != (rc = sr_set_blocklength(cd, blksize))) |
| return rc; |
| } |
| #ifdef DEBUG |
| sr_printk(KERN_INFO, cd, "sr_read_sector lba=%d blksize=%d\n", |
| lba, blksize); |
| #endif |
| |
| memset(&cgc, 0, sizeof(struct packet_command)); |
| cgc.cmd[0] = GPCMD_READ_10; |
| cgc.cmd[2] = (unsigned char) (lba >> 24) & 0xff; |
| cgc.cmd[3] = (unsigned char) (lba >> 16) & 0xff; |
| cgc.cmd[4] = (unsigned char) (lba >> 8) & 0xff; |
| cgc.cmd[5] = (unsigned char) lba & 0xff; |
| cgc.cmd[8] = 1; |
| cgc.buffer = dest; |
| cgc.buflen = blksize; |
| cgc.data_direction = DMA_FROM_DEVICE; |
| cgc.timeout = IOCTL_TIMEOUT; |
| rc = sr_do_ioctl(cd, &cgc); |
| |
| if (blksize != CD_FRAMESIZE) |
| rc |= sr_set_blocklength(cd, CD_FRAMESIZE); |
| return rc; |
| } |
| |
| /* |
| * read a sector in raw mode to check the sector format |
| * ret: 1 == mode2 (XA), 0 == mode1, <0 == error |
| */ |
| |
| int sr_is_xa(Scsi_CD *cd) |
| { |
| unsigned char *raw_sector; |
| int is_xa; |
| |
| if (!xa_test) |
| return 0; |
| |
| raw_sector = kmalloc(2048, GFP_KERNEL); |
| if (!raw_sector) |
| return -ENOMEM; |
| if (0 == sr_read_sector(cd, cd->ms_offset + 16, |
| CD_FRAMESIZE_RAW1, raw_sector)) { |
| is_xa = (raw_sector[3] == 0x02) ? 1 : 0; |
| } else { |
| /* read a raw sector failed for some reason. */ |
| is_xa = -1; |
| } |
| kfree(raw_sector); |
| #ifdef DEBUG |
| sr_printk(KERN_INFO, cd, "sr_is_xa: %d\n", is_xa); |
| #endif |
| return is_xa; |
| } |