| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * OTG Finite State Machine from OTG spec |
| * |
| * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. |
| * |
| * Author: Li Yang <LeoLi@freescale.com> |
| * Jerry Huang <Chang-Ming.Huang@freescale.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/usb.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/otg.h> |
| #include <linux/usb/otg-fsm.h> |
| |
| #ifdef VERBOSE |
| #define VDBG(fmt, args...) pr_debug("[%s] " fmt, \ |
| __func__, ## args) |
| #else |
| #define VDBG(stuff...) do {} while (0) |
| #endif |
| |
| /* Change USB protocol when there is a protocol change */ |
| static int otg_set_protocol(struct otg_fsm *fsm, int protocol) |
| { |
| int ret = 0; |
| |
| if (fsm->protocol != protocol) { |
| VDBG("Changing role fsm->protocol= %d; new protocol= %d\n", |
| fsm->protocol, protocol); |
| /* stop old protocol */ |
| if (fsm->protocol == PROTO_HOST) |
| ret = otg_start_host(fsm, 0); |
| else if (fsm->protocol == PROTO_GADGET) |
| ret = otg_start_gadget(fsm, 0); |
| if (ret) |
| return ret; |
| |
| /* start new protocol */ |
| if (protocol == PROTO_HOST) |
| ret = otg_start_host(fsm, 1); |
| else if (protocol == PROTO_GADGET) |
| ret = otg_start_gadget(fsm, 1); |
| if (ret) |
| return ret; |
| |
| fsm->protocol = protocol; |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| /* Called when leaving a state. Do state clean up jobs here */ |
| static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) |
| { |
| switch (old_state) { |
| case OTG_STATE_B_IDLE: |
| otg_del_timer(fsm, B_SE0_SRP); |
| fsm->b_se0_srp = 0; |
| fsm->adp_sns = 0; |
| fsm->adp_prb = 0; |
| break; |
| case OTG_STATE_B_SRP_INIT: |
| fsm->data_pulse = 0; |
| fsm->b_srp_done = 0; |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| if (fsm->otg->gadget) |
| fsm->otg->gadget->host_request_flag = 0; |
| break; |
| case OTG_STATE_B_WAIT_ACON: |
| otg_del_timer(fsm, B_ASE0_BRST); |
| fsm->b_ase0_brst_tmout = 0; |
| break; |
| case OTG_STATE_B_HOST: |
| break; |
| case OTG_STATE_A_IDLE: |
| fsm->adp_prb = 0; |
| break; |
| case OTG_STATE_A_WAIT_VRISE: |
| otg_del_timer(fsm, A_WAIT_VRISE); |
| fsm->a_wait_vrise_tmout = 0; |
| break; |
| case OTG_STATE_A_WAIT_BCON: |
| otg_del_timer(fsm, A_WAIT_BCON); |
| fsm->a_wait_bcon_tmout = 0; |
| break; |
| case OTG_STATE_A_HOST: |
| otg_del_timer(fsm, A_WAIT_ENUM); |
| break; |
| case OTG_STATE_A_SUSPEND: |
| otg_del_timer(fsm, A_AIDL_BDIS); |
| fsm->a_aidl_bdis_tmout = 0; |
| fsm->a_suspend_req_inf = 0; |
| break; |
| case OTG_STATE_A_PERIPHERAL: |
| otg_del_timer(fsm, A_BIDL_ADIS); |
| fsm->a_bidl_adis_tmout = 0; |
| if (fsm->otg->gadget) |
| fsm->otg->gadget->host_request_flag = 0; |
| break; |
| case OTG_STATE_A_WAIT_VFALL: |
| otg_del_timer(fsm, A_WAIT_VFALL); |
| fsm->a_wait_vfall_tmout = 0; |
| otg_del_timer(fsm, A_WAIT_VRISE); |
| break; |
| case OTG_STATE_A_VBUS_ERR: |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void otg_hnp_polling_work(struct work_struct *work) |
| { |
| struct otg_fsm *fsm = container_of(to_delayed_work(work), |
| struct otg_fsm, hnp_polling_work); |
| struct usb_device *udev; |
| enum usb_otg_state state = fsm->otg->state; |
| u8 flag; |
| int retval; |
| |
| if (state != OTG_STATE_A_HOST && state != OTG_STATE_B_HOST) |
| return; |
| |
| udev = usb_hub_find_child(fsm->otg->host->root_hub, 1); |
| if (!udev) { |
| dev_err(fsm->otg->host->controller, |
| "no usb dev connected, can't start HNP polling\n"); |
| return; |
| } |
| |
| *fsm->host_req_flag = 0; |
| /* Get host request flag from connected USB device */ |
| retval = usb_control_msg(udev, |
| usb_rcvctrlpipe(udev, 0), |
| USB_REQ_GET_STATUS, |
| USB_DIR_IN | USB_RECIP_DEVICE, |
| 0, |
| OTG_STS_SELECTOR, |
| fsm->host_req_flag, |
| 1, |
| USB_CTRL_GET_TIMEOUT); |
| if (retval != 1) { |
| dev_err(&udev->dev, "Get one byte OTG status failed\n"); |
| return; |
| } |
| |
| flag = *fsm->host_req_flag; |
| if (flag == 0) { |
| /* Continue HNP polling */ |
| schedule_delayed_work(&fsm->hnp_polling_work, |
| msecs_to_jiffies(T_HOST_REQ_POLL)); |
| return; |
| } else if (flag != HOST_REQUEST_FLAG) { |
| dev_err(&udev->dev, "host request flag %d is invalid\n", flag); |
| return; |
| } |
| |
| /* Host request flag is set */ |
| if (state == OTG_STATE_A_HOST) { |
| /* Set b_hnp_enable */ |
| if (!fsm->otg->host->b_hnp_enable) { |
| retval = usb_control_msg(udev, |
| usb_sndctrlpipe(udev, 0), |
| USB_REQ_SET_FEATURE, 0, |
| USB_DEVICE_B_HNP_ENABLE, |
| 0, NULL, 0, |
| USB_CTRL_SET_TIMEOUT); |
| if (retval >= 0) |
| fsm->otg->host->b_hnp_enable = 1; |
| } |
| fsm->a_bus_req = 0; |
| } else if (state == OTG_STATE_B_HOST) { |
| fsm->b_bus_req = 0; |
| } |
| |
| otg_statemachine(fsm); |
| } |
| |
| static void otg_start_hnp_polling(struct otg_fsm *fsm) |
| { |
| /* |
| * The memory of host_req_flag should be allocated by |
| * controller driver, otherwise, hnp polling is not started. |
| */ |
| if (!fsm->host_req_flag) |
| return; |
| |
| if (!fsm->hnp_work_inited) { |
| INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work); |
| fsm->hnp_work_inited = true; |
| } |
| |
| schedule_delayed_work(&fsm->hnp_polling_work, |
| msecs_to_jiffies(T_HOST_REQ_POLL)); |
| } |
| |
| /* Called when entering a state */ |
| static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) |
| { |
| if (fsm->otg->state == new_state) |
| return 0; |
| VDBG("Set state: %s\n", usb_otg_state_string(new_state)); |
| otg_leave_state(fsm, fsm->otg->state); |
| switch (new_state) { |
| case OTG_STATE_B_IDLE: |
| otg_drv_vbus(fsm, 0); |
| otg_chrg_vbus(fsm, 0); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 0); |
| /* |
| * Driver is responsible for starting ADP probing |
| * if ADP sensing times out. |
| */ |
| otg_start_adp_sns(fsm); |
| otg_set_protocol(fsm, PROTO_UNDEF); |
| otg_add_timer(fsm, B_SE0_SRP); |
| break; |
| case OTG_STATE_B_SRP_INIT: |
| otg_start_pulse(fsm); |
| otg_loc_sof(fsm, 0); |
| otg_set_protocol(fsm, PROTO_UNDEF); |
| otg_add_timer(fsm, B_SRP_FAIL); |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| otg_chrg_vbus(fsm, 0); |
| otg_loc_sof(fsm, 0); |
| otg_set_protocol(fsm, PROTO_GADGET); |
| otg_loc_conn(fsm, 1); |
| break; |
| case OTG_STATE_B_WAIT_ACON: |
| otg_chrg_vbus(fsm, 0); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 0); |
| otg_set_protocol(fsm, PROTO_HOST); |
| otg_add_timer(fsm, B_ASE0_BRST); |
| fsm->a_bus_suspend = 0; |
| break; |
| case OTG_STATE_B_HOST: |
| otg_chrg_vbus(fsm, 0); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 1); |
| otg_set_protocol(fsm, PROTO_HOST); |
| usb_bus_start_enum(fsm->otg->host, |
| fsm->otg->host->otg_port); |
| otg_start_hnp_polling(fsm); |
| break; |
| case OTG_STATE_A_IDLE: |
| otg_drv_vbus(fsm, 0); |
| otg_chrg_vbus(fsm, 0); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 0); |
| otg_start_adp_prb(fsm); |
| otg_set_protocol(fsm, PROTO_HOST); |
| break; |
| case OTG_STATE_A_WAIT_VRISE: |
| otg_drv_vbus(fsm, 1); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 0); |
| otg_set_protocol(fsm, PROTO_HOST); |
| otg_add_timer(fsm, A_WAIT_VRISE); |
| break; |
| case OTG_STATE_A_WAIT_BCON: |
| otg_drv_vbus(fsm, 1); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 0); |
| otg_set_protocol(fsm, PROTO_HOST); |
| otg_add_timer(fsm, A_WAIT_BCON); |
| break; |
| case OTG_STATE_A_HOST: |
| otg_drv_vbus(fsm, 1); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 1); |
| otg_set_protocol(fsm, PROTO_HOST); |
| /* |
| * When HNP is triggered while a_bus_req = 0, a_host will |
| * suspend too fast to complete a_set_b_hnp_en |
| */ |
| if (!fsm->a_bus_req || fsm->a_suspend_req_inf) |
| otg_add_timer(fsm, A_WAIT_ENUM); |
| otg_start_hnp_polling(fsm); |
| break; |
| case OTG_STATE_A_SUSPEND: |
| otg_drv_vbus(fsm, 1); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 0); |
| otg_set_protocol(fsm, PROTO_HOST); |
| otg_add_timer(fsm, A_AIDL_BDIS); |
| |
| break; |
| case OTG_STATE_A_PERIPHERAL: |
| otg_loc_sof(fsm, 0); |
| otg_set_protocol(fsm, PROTO_GADGET); |
| otg_drv_vbus(fsm, 1); |
| otg_loc_conn(fsm, 1); |
| otg_add_timer(fsm, A_BIDL_ADIS); |
| break; |
| case OTG_STATE_A_WAIT_VFALL: |
| otg_drv_vbus(fsm, 0); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 0); |
| otg_set_protocol(fsm, PROTO_HOST); |
| otg_add_timer(fsm, A_WAIT_VFALL); |
| break; |
| case OTG_STATE_A_VBUS_ERR: |
| otg_drv_vbus(fsm, 0); |
| otg_loc_conn(fsm, 0); |
| otg_loc_sof(fsm, 0); |
| otg_set_protocol(fsm, PROTO_UNDEF); |
| break; |
| default: |
| break; |
| } |
| |
| fsm->otg->state = new_state; |
| fsm->state_changed = 1; |
| return 0; |
| } |
| |
| /* State change judgement */ |
| int otg_statemachine(struct otg_fsm *fsm) |
| { |
| enum usb_otg_state state; |
| |
| mutex_lock(&fsm->lock); |
| |
| state = fsm->otg->state; |
| fsm->state_changed = 0; |
| /* State machine state change judgement */ |
| |
| switch (state) { |
| case OTG_STATE_UNDEFINED: |
| VDBG("fsm->id = %d\n", fsm->id); |
| if (fsm->id) |
| otg_set_state(fsm, OTG_STATE_B_IDLE); |
| else |
| otg_set_state(fsm, OTG_STATE_A_IDLE); |
| break; |
| case OTG_STATE_B_IDLE: |
| if (!fsm->id) |
| otg_set_state(fsm, OTG_STATE_A_IDLE); |
| else if (fsm->b_sess_vld && fsm->otg->gadget) |
| otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); |
| else if ((fsm->b_bus_req || fsm->adp_change || fsm->power_up) && |
| fsm->b_ssend_srp && fsm->b_se0_srp) |
| otg_set_state(fsm, OTG_STATE_B_SRP_INIT); |
| break; |
| case OTG_STATE_B_SRP_INIT: |
| if (!fsm->id || fsm->b_srp_done) |
| otg_set_state(fsm, OTG_STATE_B_IDLE); |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| if (!fsm->id || !fsm->b_sess_vld) |
| otg_set_state(fsm, OTG_STATE_B_IDLE); |
| else if (fsm->b_bus_req && fsm->otg-> |
| gadget->b_hnp_enable && fsm->a_bus_suspend) |
| otg_set_state(fsm, OTG_STATE_B_WAIT_ACON); |
| break; |
| case OTG_STATE_B_WAIT_ACON: |
| if (fsm->a_conn) |
| otg_set_state(fsm, OTG_STATE_B_HOST); |
| else if (!fsm->id || !fsm->b_sess_vld) |
| otg_set_state(fsm, OTG_STATE_B_IDLE); |
| else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) { |
| fsm->b_ase0_brst_tmout = 0; |
| otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); |
| } |
| break; |
| case OTG_STATE_B_HOST: |
| if (!fsm->id || !fsm->b_sess_vld) |
| otg_set_state(fsm, OTG_STATE_B_IDLE); |
| else if (!fsm->b_bus_req || !fsm->a_conn || fsm->test_device) |
| otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); |
| break; |
| case OTG_STATE_A_IDLE: |
| if (fsm->id) |
| otg_set_state(fsm, OTG_STATE_B_IDLE); |
| else if (!fsm->a_bus_drop && (fsm->a_bus_req || |
| fsm->a_srp_det || fsm->adp_change || fsm->power_up)) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE); |
| break; |
| case OTG_STATE_A_WAIT_VRISE: |
| if (fsm->a_vbus_vld) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); |
| else if (fsm->id || fsm->a_bus_drop || |
| fsm->a_wait_vrise_tmout) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); |
| break; |
| case OTG_STATE_A_WAIT_BCON: |
| if (!fsm->a_vbus_vld) |
| otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); |
| else if (fsm->b_conn) |
| otg_set_state(fsm, OTG_STATE_A_HOST); |
| else if (fsm->id || fsm->a_bus_drop || fsm->a_wait_bcon_tmout) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); |
| break; |
| case OTG_STATE_A_HOST: |
| if (fsm->id || fsm->a_bus_drop) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); |
| else if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) && |
| fsm->otg->host->b_hnp_enable) |
| otg_set_state(fsm, OTG_STATE_A_SUSPEND); |
| else if (!fsm->b_conn) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); |
| else if (!fsm->a_vbus_vld) |
| otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); |
| break; |
| case OTG_STATE_A_SUSPEND: |
| if (!fsm->b_conn && fsm->otg->host->b_hnp_enable) |
| otg_set_state(fsm, OTG_STATE_A_PERIPHERAL); |
| else if (!fsm->b_conn && !fsm->otg->host->b_hnp_enable) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); |
| else if (fsm->a_bus_req || fsm->b_bus_resume) |
| otg_set_state(fsm, OTG_STATE_A_HOST); |
| else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); |
| else if (!fsm->a_vbus_vld) |
| otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); |
| break; |
| case OTG_STATE_A_PERIPHERAL: |
| if (fsm->id || fsm->a_bus_drop) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); |
| else if (fsm->a_bidl_adis_tmout || fsm->b_bus_suspend) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); |
| else if (!fsm->a_vbus_vld) |
| otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); |
| break; |
| case OTG_STATE_A_WAIT_VFALL: |
| if (fsm->a_wait_vfall_tmout) |
| otg_set_state(fsm, OTG_STATE_A_IDLE); |
| break; |
| case OTG_STATE_A_VBUS_ERR: |
| if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err) |
| otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); |
| break; |
| default: |
| break; |
| } |
| mutex_unlock(&fsm->lock); |
| |
| VDBG("quit statemachine, changed = %d\n", fsm->state_changed); |
| return fsm->state_changed; |
| } |
| EXPORT_SYMBOL_GPL(otg_statemachine); |
| MODULE_DESCRIPTION("OTG Finite State Machine"); |
| MODULE_LICENSE("GPL"); |