| /* |
| * QLogic Fibre Channel HBA Driver |
| * Copyright (c) 2003-2014 QLogic Corporation |
| * |
| * See LICENSE.qla2xxx for copyright and licensing details. |
| */ |
| #include "qla_def.h" |
| #include "qla_gbl.h" |
| |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| |
| #include "qla_devtbl.h" |
| |
| #ifdef CONFIG_SPARC |
| #include <asm/prom.h> |
| #endif |
| |
| #include <target/target_core_base.h> |
| #include "qla_target.h" |
| |
| /* |
| * QLogic ISP2x00 Hardware Support Function Prototypes. |
| */ |
| static int qla2x00_isp_firmware(scsi_qla_host_t *); |
| static int qla2x00_setup_chip(scsi_qla_host_t *); |
| static int qla2x00_fw_ready(scsi_qla_host_t *); |
| static int qla2x00_configure_hba(scsi_qla_host_t *); |
| static int qla2x00_configure_loop(scsi_qla_host_t *); |
| static int qla2x00_configure_local_loop(scsi_qla_host_t *); |
| static int qla2x00_configure_fabric(scsi_qla_host_t *); |
| static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *); |
| static int qla2x00_restart_isp(scsi_qla_host_t *); |
| |
| static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *); |
| static int qla84xx_init_chip(scsi_qla_host_t *); |
| static int qla25xx_init_queues(struct qla_hw_data *); |
| static int qla24xx_post_prli_work(struct scsi_qla_host*, fc_port_t *); |
| static void qla24xx_handle_plogi_done_event(struct scsi_qla_host *, |
| struct event_arg *); |
| static void qla24xx_handle_prli_done_event(struct scsi_qla_host *, |
| struct event_arg *); |
| static void __qla24xx_handle_gpdb_event(scsi_qla_host_t *, struct event_arg *); |
| |
| /* SRB Extensions ---------------------------------------------------------- */ |
| |
| void |
| qla2x00_sp_timeout(struct timer_list *t) |
| { |
| srb_t *sp = from_timer(sp, t, u.iocb_cmd.timer); |
| struct srb_iocb *iocb; |
| struct req_que *req; |
| unsigned long flags; |
| struct qla_hw_data *ha = sp->vha->hw; |
| |
| WARN_ON_ONCE(irqs_disabled()); |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| req = sp->qpair->req; |
| req->outstanding_cmds[sp->handle] = NULL; |
| iocb = &sp->u.iocb_cmd; |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| iocb->timeout(sp); |
| } |
| |
| void |
| qla2x00_sp_free(void *ptr) |
| { |
| srb_t *sp = ptr; |
| struct srb_iocb *iocb = &sp->u.iocb_cmd; |
| |
| del_timer(&iocb->timer); |
| qla2x00_rel_sp(sp); |
| } |
| |
| /* Asynchronous Login/Logout Routines -------------------------------------- */ |
| |
| unsigned long |
| qla2x00_get_async_timeout(struct scsi_qla_host *vha) |
| { |
| unsigned long tmo; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Firmware should use switch negotiated r_a_tov for timeout. */ |
| tmo = ha->r_a_tov / 10 * 2; |
| if (IS_QLAFX00(ha)) { |
| tmo = FX00_DEF_RATOV * 2; |
| } else if (!IS_FWI2_CAPABLE(ha)) { |
| /* |
| * Except for earlier ISPs where the timeout is seeded from the |
| * initialization control block. |
| */ |
| tmo = ha->login_timeout; |
| } |
| return tmo; |
| } |
| |
| static void qla24xx_abort_iocb_timeout(void *data) |
| { |
| srb_t *sp = data; |
| struct srb_iocb *abt = &sp->u.iocb_cmd; |
| |
| abt->u.abt.comp_status = CS_TIMEOUT; |
| sp->done(sp, QLA_FUNCTION_TIMEOUT); |
| } |
| |
| static void qla24xx_abort_sp_done(void *ptr, int res) |
| { |
| srb_t *sp = ptr; |
| struct srb_iocb *abt = &sp->u.iocb_cmd; |
| |
| if (del_timer(&sp->u.iocb_cmd.timer)) { |
| if (sp->flags & SRB_WAKEUP_ON_COMP) |
| complete(&abt->u.abt.comp); |
| else |
| sp->free(sp); |
| } |
| } |
| |
| static int qla24xx_async_abort_cmd(srb_t *cmd_sp, bool wait) |
| { |
| scsi_qla_host_t *vha = cmd_sp->vha; |
| struct srb_iocb *abt_iocb; |
| srb_t *sp; |
| int rval = QLA_FUNCTION_FAILED; |
| |
| sp = qla2xxx_get_qpair_sp(cmd_sp->vha, cmd_sp->qpair, cmd_sp->fcport, |
| GFP_ATOMIC); |
| if (!sp) |
| goto done; |
| |
| abt_iocb = &sp->u.iocb_cmd; |
| sp->type = SRB_ABT_CMD; |
| sp->name = "abort"; |
| sp->qpair = cmd_sp->qpair; |
| if (wait) |
| sp->flags = SRB_WAKEUP_ON_COMP; |
| |
| abt_iocb->timeout = qla24xx_abort_iocb_timeout; |
| init_completion(&abt_iocb->u.abt.comp); |
| /* FW can send 2 x ABTS's timeout/20s */ |
| qla2x00_init_timer(sp, 42); |
| |
| abt_iocb->u.abt.cmd_hndl = cmd_sp->handle; |
| abt_iocb->u.abt.req_que_no = cpu_to_le16(cmd_sp->qpair->req->id); |
| |
| sp->done = qla24xx_abort_sp_done; |
| |
| ql_dbg(ql_dbg_async, vha, 0x507c, |
| "Abort command issued - hdl=%x, type=%x\n", cmd_sp->handle, |
| cmd_sp->type); |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) |
| goto done_free_sp; |
| |
| if (wait) { |
| wait_for_completion(&abt_iocb->u.abt.comp); |
| rval = abt_iocb->u.abt.comp_status == CS_COMPLETE ? |
| QLA_SUCCESS : QLA_FUNCTION_FAILED; |
| } else { |
| goto done; |
| } |
| |
| done_free_sp: |
| sp->free(sp); |
| done: |
| return rval; |
| } |
| |
| void |
| qla2x00_async_iocb_timeout(void *data) |
| { |
| srb_t *sp = data; |
| fc_port_t *fcport = sp->fcport; |
| struct srb_iocb *lio = &sp->u.iocb_cmd; |
| int rc, h; |
| unsigned long flags; |
| |
| if (fcport) { |
| ql_dbg(ql_dbg_disc, fcport->vha, 0x2071, |
| "Async-%s timeout - hdl=%x portid=%06x %8phC.\n", |
| sp->name, sp->handle, fcport->d_id.b24, fcport->port_name); |
| |
| fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE); |
| } else { |
| pr_info("Async-%s timeout - hdl=%x.\n", |
| sp->name, sp->handle); |
| } |
| |
| switch (sp->type) { |
| case SRB_LOGIN_CMD: |
| rc = qla24xx_async_abort_cmd(sp, false); |
| if (rc) { |
| /* Retry as needed. */ |
| lio->u.logio.data[0] = MBS_COMMAND_ERROR; |
| lio->u.logio.data[1] = |
| lio->u.logio.flags & SRB_LOGIN_RETRIED ? |
| QLA_LOGIO_LOGIN_RETRIED : 0; |
| spin_lock_irqsave(sp->qpair->qp_lock_ptr, flags); |
| for (h = 1; h < sp->qpair->req->num_outstanding_cmds; |
| h++) { |
| if (sp->qpair->req->outstanding_cmds[h] == |
| sp) { |
| sp->qpair->req->outstanding_cmds[h] = |
| NULL; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(sp->qpair->qp_lock_ptr, flags); |
| sp->done(sp, QLA_FUNCTION_TIMEOUT); |
| } |
| break; |
| case SRB_LOGOUT_CMD: |
| case SRB_CT_PTHRU_CMD: |
| case SRB_MB_IOCB: |
| case SRB_NACK_PLOGI: |
| case SRB_NACK_PRLI: |
| case SRB_NACK_LOGO: |
| case SRB_CTRL_VP: |
| rc = qla24xx_async_abort_cmd(sp, false); |
| if (rc) { |
| spin_lock_irqsave(sp->qpair->qp_lock_ptr, flags); |
| for (h = 1; h < sp->qpair->req->num_outstanding_cmds; |
| h++) { |
| if (sp->qpair->req->outstanding_cmds[h] == |
| sp) { |
| sp->qpair->req->outstanding_cmds[h] = |
| NULL; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(sp->qpair->qp_lock_ptr, flags); |
| sp->done(sp, QLA_FUNCTION_TIMEOUT); |
| } |
| break; |
| } |
| } |
| |
| static void |
| qla2x00_async_login_sp_done(void *ptr, int res) |
| { |
| srb_t *sp = ptr; |
| struct scsi_qla_host *vha = sp->vha; |
| struct srb_iocb *lio = &sp->u.iocb_cmd; |
| struct event_arg ea; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20dd, |
| "%s %8phC res %d \n", __func__, sp->fcport->port_name, res); |
| |
| sp->fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE); |
| |
| if (!test_bit(UNLOADING, &vha->dpc_flags)) { |
| memset(&ea, 0, sizeof(ea)); |
| ea.event = FCME_PLOGI_DONE; |
| ea.fcport = sp->fcport; |
| ea.data[0] = lio->u.logio.data[0]; |
| ea.data[1] = lio->u.logio.data[1]; |
| ea.iop[0] = lio->u.logio.iop[0]; |
| ea.iop[1] = lio->u.logio.iop[1]; |
| ea.sp = sp; |
| qla2x00_fcport_event_handler(vha, &ea); |
| } |
| |
| sp->free(sp); |
| } |
| |
| static inline bool |
| fcport_is_smaller(fc_port_t *fcport) |
| { |
| if (wwn_to_u64(fcport->port_name) < |
| wwn_to_u64(fcport->vha->port_name)) |
| return true; |
| else |
| return false; |
| } |
| |
| static inline bool |
| fcport_is_bigger(fc_port_t *fcport) |
| { |
| return !fcport_is_smaller(fcport); |
| } |
| |
| int |
| qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, |
| uint16_t *data) |
| { |
| srb_t *sp; |
| struct srb_iocb *lio; |
| int rval = QLA_FUNCTION_FAILED; |
| |
| if (!vha->flags.online) |
| goto done; |
| |
| sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); |
| if (!sp) |
| goto done; |
| |
| fcport->flags |= FCF_ASYNC_SENT; |
| fcport->logout_completed = 0; |
| |
| fcport->disc_state = DSC_LOGIN_PEND; |
| sp->type = SRB_LOGIN_CMD; |
| sp->name = "login"; |
| sp->gen1 = fcport->rscn_gen; |
| sp->gen2 = fcport->login_gen; |
| |
| lio = &sp->u.iocb_cmd; |
| lio->timeout = qla2x00_async_iocb_timeout; |
| qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); |
| |
| sp->done = qla2x00_async_login_sp_done; |
| if (N2N_TOPO(fcport->vha->hw) && fcport_is_bigger(fcport)) |
| lio->u.logio.flags |= SRB_LOGIN_PRLI_ONLY; |
| else |
| lio->u.logio.flags |= SRB_LOGIN_COND_PLOGI; |
| |
| if (fcport->fc4f_nvme) |
| lio->u.logio.flags |= SRB_LOGIN_SKIP_PRLI; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x2072, |
| "Async-login - %8phC hdl=%x, loopid=%x portid=%02x%02x%02x " |
| "retries=%d.\n", fcport->port_name, sp->handle, fcport->loop_id, |
| fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, |
| fcport->login_retry); |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) { |
| fcport->flags |= FCF_LOGIN_NEEDED; |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| goto done_free_sp; |
| } |
| |
| return rval; |
| |
| done_free_sp: |
| sp->free(sp); |
| fcport->flags &= ~FCF_ASYNC_SENT; |
| done: |
| fcport->flags &= ~FCF_ASYNC_ACTIVE; |
| return rval; |
| } |
| |
| static void |
| qla2x00_async_logout_sp_done(void *ptr, int res) |
| { |
| srb_t *sp = ptr; |
| |
| sp->fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE); |
| sp->fcport->login_gen++; |
| qlt_logo_completion_handler(sp->fcport, res); |
| sp->free(sp); |
| } |
| |
| int |
| qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| srb_t *sp; |
| struct srb_iocb *lio; |
| int rval = QLA_FUNCTION_FAILED; |
| |
| if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT)) |
| return rval; |
| |
| fcport->flags |= FCF_ASYNC_SENT; |
| sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); |
| if (!sp) |
| goto done; |
| |
| sp->type = SRB_LOGOUT_CMD; |
| sp->name = "logout"; |
| |
| lio = &sp->u.iocb_cmd; |
| lio->timeout = qla2x00_async_iocb_timeout; |
| qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); |
| |
| sp->done = qla2x00_async_logout_sp_done; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x2070, |
| "Async-logout - hdl=%x loop-id=%x portid=%02x%02x%02x %8phC.\n", |
| sp->handle, fcport->loop_id, fcport->d_id.b.domain, |
| fcport->d_id.b.area, fcport->d_id.b.al_pa, |
| fcport->port_name); |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) |
| goto done_free_sp; |
| return rval; |
| |
| done_free_sp: |
| sp->free(sp); |
| done: |
| fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE); |
| return rval; |
| } |
| |
| void |
| qla2x00_async_prlo_done(struct scsi_qla_host *vha, fc_port_t *fcport, |
| uint16_t *data) |
| { |
| fcport->flags &= ~FCF_ASYNC_ACTIVE; |
| /* Don't re-login in target mode */ |
| if (!fcport->tgt_session) |
| qla2x00_mark_device_lost(vha, fcport, 1, 0); |
| qlt_logo_completion_handler(fcport, data[0]); |
| } |
| |
| static void |
| qla2x00_async_prlo_sp_done(void *s, int res) |
| { |
| srb_t *sp = (srb_t *)s; |
| struct srb_iocb *lio = &sp->u.iocb_cmd; |
| struct scsi_qla_host *vha = sp->vha; |
| |
| sp->fcport->flags &= ~FCF_ASYNC_ACTIVE; |
| if (!test_bit(UNLOADING, &vha->dpc_flags)) |
| qla2x00_post_async_prlo_done_work(sp->fcport->vha, sp->fcport, |
| lio->u.logio.data); |
| sp->free(sp); |
| } |
| |
| int |
| qla2x00_async_prlo(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| srb_t *sp; |
| struct srb_iocb *lio; |
| int rval; |
| |
| rval = QLA_FUNCTION_FAILED; |
| sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); |
| if (!sp) |
| goto done; |
| |
| sp->type = SRB_PRLO_CMD; |
| sp->name = "prlo"; |
| |
| lio = &sp->u.iocb_cmd; |
| lio->timeout = qla2x00_async_iocb_timeout; |
| qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); |
| |
| sp->done = qla2x00_async_prlo_sp_done; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x2070, |
| "Async-prlo - hdl=%x loop-id=%x portid=%02x%02x%02x.\n", |
| sp->handle, fcport->loop_id, fcport->d_id.b.domain, |
| fcport->d_id.b.area, fcport->d_id.b.al_pa); |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) |
| goto done_free_sp; |
| |
| return rval; |
| |
| done_free_sp: |
| sp->free(sp); |
| done: |
| fcport->flags &= ~FCF_ASYNC_ACTIVE; |
| return rval; |
| } |
| |
| static |
| void qla24xx_handle_adisc_event(scsi_qla_host_t *vha, struct event_arg *ea) |
| { |
| struct fc_port *fcport = ea->fcport; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20d2, |
| "%s %8phC DS %d LS %d rc %d login %d|%d rscn %d|%d lid %d\n", |
| __func__, fcport->port_name, fcport->disc_state, |
| fcport->fw_login_state, ea->rc, fcport->login_gen, ea->sp->gen2, |
| fcport->rscn_gen, ea->sp->gen1, fcport->loop_id); |
| |
| if (ea->data[0] != MBS_COMMAND_COMPLETE) { |
| ql_dbg(ql_dbg_disc, vha, 0x2066, |
| "%s %8phC: adisc fail: post delete\n", |
| __func__, ea->fcport->port_name); |
| /* deleted = 0 & logout_on_delete = force fw cleanup */ |
| fcport->deleted = 0; |
| fcport->logout_on_delete = 1; |
| qlt_schedule_sess_for_deletion(ea->fcport); |
| return; |
| } |
| |
| if (ea->fcport->disc_state == DSC_DELETE_PEND) |
| return; |
| |
| if (ea->sp->gen2 != ea->fcport->login_gen) { |
| /* target side must have changed it. */ |
| ql_dbg(ql_dbg_disc, vha, 0x20d3, |
| "%s %8phC generation changed\n", |
| __func__, ea->fcport->port_name); |
| return; |
| } else if (ea->sp->gen1 != ea->fcport->rscn_gen) { |
| qla_rscn_replay(fcport); |
| qlt_schedule_sess_for_deletion(fcport); |
| return; |
| } |
| |
| __qla24xx_handle_gpdb_event(vha, ea); |
| } |
| |
| static int qla_post_els_plogi_work(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_ELS_PLOGI); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| e->u.fcport.fcport = fcport; |
| fcport->flags |= FCF_ASYNC_ACTIVE; |
| return qla2x00_post_work(vha, e); |
| } |
| |
| static void |
| qla2x00_async_adisc_sp_done(void *ptr, int res) |
| { |
| srb_t *sp = ptr; |
| struct scsi_qla_host *vha = sp->vha; |
| struct event_arg ea; |
| struct srb_iocb *lio = &sp->u.iocb_cmd; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x2066, |
| "Async done-%s res %x %8phC\n", |
| sp->name, res, sp->fcport->port_name); |
| |
| sp->fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE); |
| |
| memset(&ea, 0, sizeof(ea)); |
| ea.event = FCME_ADISC_DONE; |
| ea.rc = res; |
| ea.data[0] = lio->u.logio.data[0]; |
| ea.data[1] = lio->u.logio.data[1]; |
| ea.iop[0] = lio->u.logio.iop[0]; |
| ea.iop[1] = lio->u.logio.iop[1]; |
| ea.fcport = sp->fcport; |
| ea.sp = sp; |
| |
| qla2x00_fcport_event_handler(vha, &ea); |
| |
| sp->free(sp); |
| } |
| |
| int |
| qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport, |
| uint16_t *data) |
| { |
| srb_t *sp; |
| struct srb_iocb *lio; |
| int rval = QLA_FUNCTION_FAILED; |
| |
| if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT)) |
| return rval; |
| |
| fcport->flags |= FCF_ASYNC_SENT; |
| sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); |
| if (!sp) |
| goto done; |
| |
| sp->type = SRB_ADISC_CMD; |
| sp->name = "adisc"; |
| |
| lio = &sp->u.iocb_cmd; |
| lio->timeout = qla2x00_async_iocb_timeout; |
| sp->gen1 = fcport->rscn_gen; |
| sp->gen2 = fcport->login_gen; |
| qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); |
| |
| sp->done = qla2x00_async_adisc_sp_done; |
| if (data[1] & QLA_LOGIO_LOGIN_RETRIED) |
| lio->u.logio.flags |= SRB_LOGIN_RETRIED; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x206f, |
| "Async-adisc - hdl=%x loopid=%x portid=%06x %8phC.\n", |
| sp->handle, fcport->loop_id, fcport->d_id.b24, fcport->port_name); |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) |
| goto done_free_sp; |
| |
| return rval; |
| |
| done_free_sp: |
| sp->free(sp); |
| done: |
| fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE); |
| qla2x00_post_async_adisc_work(vha, fcport, data); |
| return rval; |
| } |
| |
| static bool qla2x00_is_reserved_id(scsi_qla_host_t *vha, uint16_t loop_id) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (IS_FWI2_CAPABLE(ha)) |
| return loop_id > NPH_LAST_HANDLE; |
| |
| return (loop_id > ha->max_loop_id && loop_id < SNS_FIRST_LOOP_ID) || |
| loop_id == MANAGEMENT_SERVER || loop_id == BROADCAST; |
| } |
| |
| /** |
| * qla2x00_find_new_loop_id - scan through our port list and find a new usable loop ID |
| * @vha: adapter state pointer. |
| * @dev: port structure pointer. |
| * |
| * Returns: |
| * qla2x00 local function return status code. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| static int qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev) |
| { |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| unsigned long flags = 0; |
| |
| rval = QLA_SUCCESS; |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| |
| dev->loop_id = find_first_zero_bit(ha->loop_id_map, LOOPID_MAP_SIZE); |
| if (dev->loop_id >= LOOPID_MAP_SIZE || |
| qla2x00_is_reserved_id(vha, dev->loop_id)) { |
| dev->loop_id = FC_NO_LOOP_ID; |
| rval = QLA_FUNCTION_FAILED; |
| } else { |
| set_bit(dev->loop_id, ha->loop_id_map); |
| } |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| if (rval == QLA_SUCCESS) |
| ql_dbg(ql_dbg_disc, dev->vha, 0x2086, |
| "Assigning new loopid=%x, portid=%x.\n", |
| dev->loop_id, dev->d_id.b24); |
| else |
| ql_log(ql_log_warn, dev->vha, 0x2087, |
| "No loop_id's available, portid=%x.\n", |
| dev->d_id.b24); |
| |
| return rval; |
| } |
| |
| void qla2x00_clear_loop_id(fc_port_t *fcport) |
| { |
| struct qla_hw_data *ha = fcport->vha->hw; |
| |
| if (fcport->loop_id == FC_NO_LOOP_ID || |
| qla2x00_is_reserved_id(fcport->vha, fcport->loop_id)) |
| return; |
| |
| clear_bit(fcport->loop_id, ha->loop_id_map); |
| fcport->loop_id = FC_NO_LOOP_ID; |
| } |
| |
| static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha, |
| struct event_arg *ea) |
| { |
| fc_port_t *fcport, *conflict_fcport; |
| struct get_name_list_extended *e; |
| u16 i, n, found = 0, loop_id; |
| port_id_t id; |
| u64 wwn; |
| u16 data[2]; |
| u8 current_login_state; |
| |
| fcport = ea->fcport; |
| ql_dbg(ql_dbg_disc, vha, 0xffff, |
| "%s %8phC DS %d LS rc %d %d login %d|%d rscn %d|%d lid %d\n", |
| __func__, fcport->port_name, fcport->disc_state, |
| fcport->fw_login_state, ea->rc, |
| fcport->login_gen, fcport->last_login_gen, |
| fcport->rscn_gen, fcport->last_rscn_gen, vha->loop_id); |
| |
| if (fcport->disc_state == DSC_DELETE_PEND) |
| return; |
| |
| if (ea->rc) { /* rval */ |
| if (fcport->login_retry == 0) { |
| ql_dbg(ql_dbg_disc, vha, 0x20de, |
| "GNL failed Port login retry %8phN, retry cnt=%d.\n", |
| fcport->port_name, fcport->login_retry); |
| } |
| return; |
| } |
| |
| if (fcport->last_rscn_gen != fcport->rscn_gen) { |
| qla_rscn_replay(fcport); |
| qlt_schedule_sess_for_deletion(fcport); |
| return; |
| } else if (fcport->last_login_gen != fcport->login_gen) { |
| ql_dbg(ql_dbg_disc, vha, 0x20e0, |
| "%s %8phC login gen changed\n", |
| __func__, fcport->port_name); |
| return; |
| } |
| |
| n = ea->data[0] / sizeof(struct get_name_list_extended); |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20e1, |
| "%s %d %8phC n %d %02x%02x%02x lid %d \n", |
| __func__, __LINE__, fcport->port_name, n, |
| fcport->d_id.b.domain, fcport->d_id.b.area, |
| fcport->d_id.b.al_pa, fcport->loop_id); |
| |
| for (i = 0; i < n; i++) { |
| e = &vha->gnl.l[i]; |
| wwn = wwn_to_u64(e->port_name); |
| id.b.domain = e->port_id[2]; |
| id.b.area = e->port_id[1]; |
| id.b.al_pa = e->port_id[0]; |
| id.b.rsvd_1 = 0; |
| |
| if (memcmp((u8 *)&wwn, fcport->port_name, WWN_SIZE)) |
| continue; |
| |
| if (IS_SW_RESV_ADDR(id)) |
| continue; |
| |
| found = 1; |
| |
| loop_id = le16_to_cpu(e->nport_handle); |
| loop_id = (loop_id & 0x7fff); |
| if (fcport->fc4f_nvme) |
| current_login_state = e->current_login_state >> 4; |
| else |
| current_login_state = e->current_login_state & 0xf; |
| |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20e2, |
| "%s found %8phC CLS [%x|%x] nvme %d ID[%02x%02x%02x|%02x%02x%02x] lid[%d|%d]\n", |
| __func__, fcport->port_name, |
| e->current_login_state, fcport->fw_login_state, |
| fcport->fc4f_nvme, id.b.domain, id.b.area, id.b.al_pa, |
| fcport->d_id.b.domain, fcport->d_id.b.area, |
| fcport->d_id.b.al_pa, loop_id, fcport->loop_id); |
| |
| switch (fcport->disc_state) { |
| case DSC_DELETE_PEND: |
| case DSC_DELETED: |
| break; |
| default: |
| if ((id.b24 != fcport->d_id.b24 && |
| fcport->d_id.b24) || |
| (fcport->loop_id != FC_NO_LOOP_ID && |
| fcport->loop_id != loop_id)) { |
| ql_dbg(ql_dbg_disc, vha, 0x20e3, |
| "%s %d %8phC post del sess\n", |
| __func__, __LINE__, fcport->port_name); |
| qlt_schedule_sess_for_deletion(fcport); |
| return; |
| } |
| break; |
| } |
| |
| fcport->loop_id = loop_id; |
| |
| wwn = wwn_to_u64(fcport->port_name); |
| qlt_find_sess_invalidate_other(vha, wwn, |
| id, loop_id, &conflict_fcport); |
| |
| if (conflict_fcport) { |
| /* |
| * Another share fcport share the same loop_id & |
| * nport id. Conflict fcport needs to finish |
| * cleanup before this fcport can proceed to login. |
| */ |
| conflict_fcport->conflict = fcport; |
| fcport->login_pause = 1; |
| } |
| |
| switch (vha->hw->current_topology) { |
| default: |
| switch (current_login_state) { |
| case DSC_LS_PRLI_COMP: |
| ql_dbg(ql_dbg_disc + ql_dbg_verbose, |
| vha, 0x20e4, "%s %d %8phC post gpdb\n", |
| __func__, __LINE__, fcport->port_name); |
| |
| if ((e->prli_svc_param_word_3[0] & BIT_4) == 0) |
| fcport->port_type = FCT_INITIATOR; |
| else |
| fcport->port_type = FCT_TARGET; |
| data[0] = data[1] = 0; |
| qla2x00_post_async_adisc_work(vha, fcport, |
| data); |
| break; |
| case DSC_LS_PORT_UNAVAIL: |
| default: |
| if (fcport->loop_id == FC_NO_LOOP_ID) { |
| qla2x00_find_new_loop_id(vha, fcport); |
| fcport->fw_login_state = |
| DSC_LS_PORT_UNAVAIL; |
| } |
| ql_dbg(ql_dbg_disc, vha, 0x20e5, |
| "%s %d %8phC\n", __func__, __LINE__, |
| fcport->port_name); |
| qla24xx_fcport_handle_login(vha, fcport); |
| break; |
| } |
| break; |
| case ISP_CFG_N: |
| fcport->fw_login_state = current_login_state; |
| fcport->d_id = id; |
| switch (current_login_state) { |
| case DSC_LS_PRLI_COMP: |
| if ((e->prli_svc_param_word_3[0] & BIT_4) == 0) |
| fcport->port_type = FCT_INITIATOR; |
| else |
| fcport->port_type = FCT_TARGET; |
| |
| data[0] = data[1] = 0; |
| qla2x00_post_async_adisc_work(vha, fcport, |
| data); |
| break; |
| case DSC_LS_PLOGI_COMP: |
| if (fcport_is_bigger(fcport)) { |
| /* local adapter is smaller */ |
| if (fcport->loop_id != FC_NO_LOOP_ID) |
| qla2x00_clear_loop_id(fcport); |
| |
| fcport->loop_id = loop_id; |
| qla24xx_fcport_handle_login(vha, |
| fcport); |
| break; |
| } |
| /* fall through */ |
| default: |
| if (fcport_is_smaller(fcport)) { |
| /* local adapter is bigger */ |
| if (fcport->loop_id != FC_NO_LOOP_ID) |
| qla2x00_clear_loop_id(fcport); |
| |
| fcport->loop_id = loop_id; |
| qla24xx_fcport_handle_login(vha, |
| fcport); |
| } |
| break; |
| } |
| break; |
| } /* switch (ha->current_topology) */ |
| } |
| |
| if (!found) { |
| switch (vha->hw->current_topology) { |
| case ISP_CFG_F: |
| case ISP_CFG_FL: |
| for (i = 0; i < n; i++) { |
| e = &vha->gnl.l[i]; |
| id.b.domain = e->port_id[0]; |
| id.b.area = e->port_id[1]; |
| id.b.al_pa = e->port_id[2]; |
| id.b.rsvd_1 = 0; |
| loop_id = le16_to_cpu(e->nport_handle); |
| |
| if (fcport->d_id.b24 == id.b24) { |
| conflict_fcport = |
| qla2x00_find_fcport_by_wwpn(vha, |
| e->port_name, 0); |
| if (conflict_fcport) { |
| ql_dbg(ql_dbg_disc + ql_dbg_verbose, |
| vha, 0x20e5, |
| "%s %d %8phC post del sess\n", |
| __func__, __LINE__, |
| conflict_fcport->port_name); |
| qlt_schedule_sess_for_deletion |
| (conflict_fcport); |
| } |
| } |
| /* |
| * FW already picked this loop id for |
| * another fcport |
| */ |
| if (fcport->loop_id == loop_id) |
| fcport->loop_id = FC_NO_LOOP_ID; |
| } |
| qla24xx_fcport_handle_login(vha, fcport); |
| break; |
| case ISP_CFG_N: |
| fcport->disc_state = DSC_DELETED; |
| if (time_after_eq(jiffies, fcport->dm_login_expire)) { |
| if (fcport->n2n_link_reset_cnt < 2) { |
| fcport->n2n_link_reset_cnt++; |
| /* |
| * remote port is not sending PLOGI. |
| * Reset link to kick start his state |
| * machine |
| */ |
| set_bit(N2N_LINK_RESET, |
| &vha->dpc_flags); |
| } else { |
| if (fcport->n2n_chip_reset < 1) { |
| ql_log(ql_log_info, vha, 0x705d, |
| "Chip reset to bring laser down"); |
| set_bit(ISP_ABORT_NEEDED, |
| &vha->dpc_flags); |
| fcport->n2n_chip_reset++; |
| } else { |
| ql_log(ql_log_info, vha, 0x705d, |
| "Remote port %8ph is not coming back\n", |
| fcport->port_name); |
| fcport->scan_state = 0; |
| } |
| } |
| qla2xxx_wake_dpc(vha); |
| } else { |
| /* |
| * report port suppose to do PLOGI. Give him |
| * more time. FW will catch it. |
| */ |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| } /* gnl_event */ |
| |
| static void |
| qla24xx_async_gnl_sp_done(void *s, int res) |
| { |
| struct srb *sp = s; |
| struct scsi_qla_host *vha = sp->vha; |
| unsigned long flags; |
| struct fc_port *fcport = NULL, *tf; |
| u16 i, n = 0, loop_id; |
| struct event_arg ea; |
| struct get_name_list_extended *e; |
| u64 wwn; |
| struct list_head h; |
| bool found = false; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20e7, |
| "Async done-%s res %x mb[1]=%x mb[2]=%x \n", |
| sp->name, res, sp->u.iocb_cmd.u.mbx.in_mb[1], |
| sp->u.iocb_cmd.u.mbx.in_mb[2]); |
| |
| if (res == QLA_FUNCTION_TIMEOUT) |
| return; |
| |
| sp->fcport->flags &= ~(FCF_ASYNC_SENT|FCF_ASYNC_ACTIVE); |
| memset(&ea, 0, sizeof(ea)); |
| ea.sp = sp; |
| ea.rc = res; |
| ea.event = FCME_GNL_DONE; |
| |
| if (sp->u.iocb_cmd.u.mbx.in_mb[1] >= |
| sizeof(struct get_name_list_extended)) { |
| n = sp->u.iocb_cmd.u.mbx.in_mb[1] / |
| sizeof(struct get_name_list_extended); |
| ea.data[0] = sp->u.iocb_cmd.u.mbx.in_mb[1]; /* amnt xfered */ |
| } |
| |
| for (i = 0; i < n; i++) { |
| e = &vha->gnl.l[i]; |
| loop_id = le16_to_cpu(e->nport_handle); |
| /* mask out reserve bit */ |
| loop_id = (loop_id & 0x7fff); |
| set_bit(loop_id, vha->hw->loop_id_map); |
| wwn = wwn_to_u64(e->port_name); |
| |
| ql_dbg(ql_dbg_disc + ql_dbg_verbose, vha, 0x20e8, |
| "%s %8phC %02x:%02x:%02x state %d/%d lid %x \n", |
| __func__, (void *)&wwn, e->port_id[2], e->port_id[1], |
| e->port_id[0], e->current_login_state, e->last_login_state, |
| (loop_id & 0x7fff)); |
| } |
| |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| |
| INIT_LIST_HEAD(&h); |
| fcport = tf = NULL; |
| if (!list_empty(&vha->gnl.fcports)) |
| list_splice_init(&vha->gnl.fcports, &h); |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| |
| list_for_each_entry_safe(fcport, tf, &h, gnl_entry) { |
| list_del_init(&fcport->gnl_entry); |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE); |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| ea.fcport = fcport; |
| |
| qla2x00_fcport_event_handler(vha, &ea); |
| } |
| |
| /* create new fcport if fw has knowledge of new sessions */ |
| for (i = 0; i < n; i++) { |
| port_id_t id; |
| u64 wwnn; |
| |
| e = &vha->gnl.l[i]; |
| wwn = wwn_to_u64(e->port_name); |
| |
| found = false; |
| list_for_each_entry_safe(fcport, tf, &vha->vp_fcports, list) { |
| if (!memcmp((u8 *)&wwn, fcport->port_name, |
| WWN_SIZE)) { |
| found = true; |
| break; |
| } |
| } |
| |
| id.b.domain = e->port_id[2]; |
| id.b.area = e->port_id[1]; |
| id.b.al_pa = e->port_id[0]; |
| id.b.rsvd_1 = 0; |
| |
| if (!found && wwn && !IS_SW_RESV_ADDR(id)) { |
| ql_dbg(ql_dbg_disc, vha, 0x2065, |
| "%s %d %8phC %06x post new sess\n", |
| __func__, __LINE__, (u8 *)&wwn, id.b24); |
| wwnn = wwn_to_u64(e->node_name); |
| qla24xx_post_newsess_work(vha, &id, (u8 *)&wwn, |
| (u8 *)&wwnn, NULL, FC4_TYPE_UNKNOWN); |
| } |
| } |
| |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| vha->gnl.sent = 0; |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| |
| sp->free(sp); |
| } |
| |
| int qla24xx_async_gnl(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| srb_t *sp; |
| struct srb_iocb *mbx; |
| int rval = QLA_FUNCTION_FAILED; |
| unsigned long flags; |
| u16 *mb; |
| |
| if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT)) |
| return rval; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20d9, |
| "Async-gnlist WWPN %8phC \n", fcport->port_name); |
| |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| fcport->flags |= FCF_ASYNC_SENT; |
| fcport->disc_state = DSC_GNL; |
| fcport->last_rscn_gen = fcport->rscn_gen; |
| fcport->last_login_gen = fcport->login_gen; |
| |
| list_add_tail(&fcport->gnl_entry, &vha->gnl.fcports); |
| if (vha->gnl.sent) { |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| return QLA_SUCCESS; |
| } |
| vha->gnl.sent = 1; |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| |
| sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); |
| if (!sp) |
| goto done; |
| |
| sp->type = SRB_MB_IOCB; |
| sp->name = "gnlist"; |
| sp->gen1 = fcport->rscn_gen; |
| sp->gen2 = fcport->login_gen; |
| |
| mbx = &sp->u.iocb_cmd; |
| mbx->timeout = qla2x00_async_iocb_timeout; |
| qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha)+2); |
| |
| mb = sp->u.iocb_cmd.u.mbx.out_mb; |
| mb[0] = MBC_PORT_NODE_NAME_LIST; |
| mb[1] = BIT_2 | BIT_3; |
| mb[2] = MSW(vha->gnl.ldma); |
| mb[3] = LSW(vha->gnl.ldma); |
| mb[6] = MSW(MSD(vha->gnl.ldma)); |
| mb[7] = LSW(MSD(vha->gnl.ldma)); |
| mb[8] = vha->gnl.size; |
| mb[9] = vha->vp_idx; |
| |
| sp->done = qla24xx_async_gnl_sp_done; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20da, |
| "Async-%s - OUT WWPN %8phC hndl %x\n", |
| sp->name, fcport->port_name, sp->handle); |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) |
| goto done_free_sp; |
| |
| return rval; |
| |
| done_free_sp: |
| sp->free(sp); |
| fcport->flags &= ~FCF_ASYNC_SENT; |
| done: |
| return rval; |
| } |
| |
| int qla24xx_post_gnl_work(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_GNL); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| e->u.fcport.fcport = fcport; |
| fcport->flags |= FCF_ASYNC_ACTIVE; |
| return qla2x00_post_work(vha, e); |
| } |
| |
| static |
| void qla24xx_async_gpdb_sp_done(void *s, int res) |
| { |
| struct srb *sp = s; |
| struct scsi_qla_host *vha = sp->vha; |
| struct qla_hw_data *ha = vha->hw; |
| fc_port_t *fcport = sp->fcport; |
| u16 *mb = sp->u.iocb_cmd.u.mbx.in_mb; |
| struct event_arg ea; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20db, |
| "Async done-%s res %x, WWPN %8phC mb[1]=%x mb[2]=%x \n", |
| sp->name, res, fcport->port_name, mb[1], mb[2]); |
| |
| if (res == QLA_FUNCTION_TIMEOUT) { |
| dma_pool_free(sp->vha->hw->s_dma_pool, sp->u.iocb_cmd.u.mbx.in, |
| sp->u.iocb_cmd.u.mbx.in_dma); |
| return; |
| } |
| |
| fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE); |
| memset(&ea, 0, sizeof(ea)); |
| ea.event = FCME_GPDB_DONE; |
| ea.fcport = fcport; |
| ea.sp = sp; |
| |
| qla2x00_fcport_event_handler(vha, &ea); |
| |
| dma_pool_free(ha->s_dma_pool, sp->u.iocb_cmd.u.mbx.in, |
| sp->u.iocb_cmd.u.mbx.in_dma); |
| |
| sp->free(sp); |
| } |
| |
| static int qla24xx_post_prli_work(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_PRLI); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| e->u.fcport.fcport = fcport; |
| |
| return qla2x00_post_work(vha, e); |
| } |
| |
| static void |
| qla2x00_async_prli_sp_done(void *ptr, int res) |
| { |
| srb_t *sp = ptr; |
| struct scsi_qla_host *vha = sp->vha; |
| struct srb_iocb *lio = &sp->u.iocb_cmd; |
| struct event_arg ea; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x2129, |
| "%s %8phC res %d \n", __func__, |
| sp->fcport->port_name, res); |
| |
| sp->fcport->flags &= ~FCF_ASYNC_SENT; |
| |
| if (!test_bit(UNLOADING, &vha->dpc_flags)) { |
| memset(&ea, 0, sizeof(ea)); |
| ea.event = FCME_PRLI_DONE; |
| ea.fcport = sp->fcport; |
| ea.data[0] = lio->u.logio.data[0]; |
| ea.data[1] = lio->u.logio.data[1]; |
| ea.iop[0] = lio->u.logio.iop[0]; |
| ea.iop[1] = lio->u.logio.iop[1]; |
| ea.sp = sp; |
| |
| qla2x00_fcport_event_handler(vha, &ea); |
| } |
| |
| sp->free(sp); |
| } |
| |
| int |
| qla24xx_async_prli(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| srb_t *sp; |
| struct srb_iocb *lio; |
| int rval = QLA_FUNCTION_FAILED; |
| |
| if (!vha->flags.online) |
| return rval; |
| |
| if (fcport->fw_login_state == DSC_LS_PLOGI_PEND || |
| fcport->fw_login_state == DSC_LS_PRLI_PEND) |
| return rval; |
| |
| sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); |
| if (!sp) |
| return rval; |
| |
| fcport->flags |= FCF_ASYNC_SENT; |
| fcport->logout_completed = 0; |
| |
| sp->type = SRB_PRLI_CMD; |
| sp->name = "prli"; |
| |
| lio = &sp->u.iocb_cmd; |
| lio->timeout = qla2x00_async_iocb_timeout; |
| qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); |
| |
| sp->done = qla2x00_async_prli_sp_done; |
| lio->u.logio.flags = 0; |
| |
| if (fcport->fc4f_nvme) |
| lio->u.logio.flags |= SRB_LOGIN_NVME_PRLI; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x211b, |
| "Async-prli - %8phC hdl=%x, loopid=%x portid=%06x retries=%d %s.\n", |
| fcport->port_name, sp->handle, fcport->loop_id, fcport->d_id.b24, |
| fcport->login_retry, fcport->fc4f_nvme ? "nvme" : "fc"); |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) { |
| fcport->flags |= FCF_LOGIN_NEEDED; |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| goto done_free_sp; |
| } |
| |
| return rval; |
| |
| done_free_sp: |
| sp->free(sp); |
| fcport->flags &= ~FCF_ASYNC_SENT; |
| return rval; |
| } |
| |
| int qla24xx_post_gpdb_work(struct scsi_qla_host *vha, fc_port_t *fcport, u8 opt) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_GPDB); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| e->u.fcport.fcport = fcport; |
| e->u.fcport.opt = opt; |
| fcport->flags |= FCF_ASYNC_ACTIVE; |
| return qla2x00_post_work(vha, e); |
| } |
| |
| int qla24xx_async_gpdb(struct scsi_qla_host *vha, fc_port_t *fcport, u8 opt) |
| { |
| srb_t *sp; |
| struct srb_iocb *mbx; |
| int rval = QLA_FUNCTION_FAILED; |
| u16 *mb; |
| dma_addr_t pd_dma; |
| struct port_database_24xx *pd; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT)) |
| return rval; |
| |
| fcport->disc_state = DSC_GPDB; |
| |
| sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); |
| if (!sp) |
| goto done; |
| |
| fcport->flags |= FCF_ASYNC_SENT; |
| sp->type = SRB_MB_IOCB; |
| sp->name = "gpdb"; |
| sp->gen1 = fcport->rscn_gen; |
| sp->gen2 = fcport->login_gen; |
| |
| mbx = &sp->u.iocb_cmd; |
| mbx->timeout = qla2x00_async_iocb_timeout; |
| qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); |
| |
| pd = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma); |
| if (pd == NULL) { |
| ql_log(ql_log_warn, vha, 0xd043, |
| "Failed to allocate port database structure.\n"); |
| goto done_free_sp; |
| } |
| |
| mb = sp->u.iocb_cmd.u.mbx.out_mb; |
| mb[0] = MBC_GET_PORT_DATABASE; |
| mb[1] = fcport->loop_id; |
| mb[2] = MSW(pd_dma); |
| mb[3] = LSW(pd_dma); |
| mb[6] = MSW(MSD(pd_dma)); |
| mb[7] = LSW(MSD(pd_dma)); |
| mb[9] = vha->vp_idx; |
| mb[10] = opt; |
| |
| mbx->u.mbx.in = (void *)pd; |
| mbx->u.mbx.in_dma = pd_dma; |
| |
| sp->done = qla24xx_async_gpdb_sp_done; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20dc, |
| "Async-%s %8phC hndl %x opt %x\n", |
| sp->name, fcport->port_name, sp->handle, opt); |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) |
| goto done_free_sp; |
| return rval; |
| |
| done_free_sp: |
| if (pd) |
| dma_pool_free(ha->s_dma_pool, pd, pd_dma); |
| |
| sp->free(sp); |
| fcport->flags &= ~FCF_ASYNC_SENT; |
| done: |
| qla24xx_post_gpdb_work(vha, fcport, opt); |
| return rval; |
| } |
| |
| static |
| void __qla24xx_handle_gpdb_event(scsi_qla_host_t *vha, struct event_arg *ea) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| ea->fcport->login_gen++; |
| ea->fcport->deleted = 0; |
| ea->fcport->logout_on_delete = 1; |
| |
| if (!ea->fcport->login_succ && !IS_SW_RESV_ADDR(ea->fcport->d_id)) { |
| vha->fcport_count++; |
| ea->fcport->login_succ = 1; |
| |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| qla24xx_sched_upd_fcport(ea->fcport); |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| } else if (ea->fcport->login_succ) { |
| /* |
| * We have an existing session. A late RSCN delivery |
| * must have triggered the session to be re-validate. |
| * Session is still valid. |
| */ |
| ql_dbg(ql_dbg_disc, vha, 0x20d6, |
| "%s %d %8phC session revalidate success\n", |
| __func__, __LINE__, ea->fcport->port_name); |
| ea->fcport->disc_state = DSC_LOGIN_COMPLETE; |
| } |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| } |
| |
| static |
| void qla24xx_handle_gpdb_event(scsi_qla_host_t *vha, struct event_arg *ea) |
| { |
| fc_port_t *fcport = ea->fcport; |
| struct port_database_24xx *pd; |
| struct srb *sp = ea->sp; |
| uint8_t ls; |
| |
| pd = (struct port_database_24xx *)sp->u.iocb_cmd.u.mbx.in; |
| |
| fcport->flags &= ~FCF_ASYNC_SENT; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20d2, |
| "%s %8phC DS %d LS %d nvme %x rc %d\n", __func__, fcport->port_name, |
| fcport->disc_state, pd->current_login_state, fcport->fc4f_nvme, |
| ea->rc); |
| |
| if (fcport->disc_state == DSC_DELETE_PEND) |
| return; |
| |
| if (fcport->fc4f_nvme) |
| ls = pd->current_login_state >> 4; |
| else |
| ls = pd->current_login_state & 0xf; |
| |
| if (ea->sp->gen2 != fcport->login_gen) { |
| /* target side must have changed it. */ |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20d3, |
| "%s %8phC generation changed\n", |
| __func__, fcport->port_name); |
| return; |
| } else if (ea->sp->gen1 != fcport->rscn_gen) { |
| qla_rscn_replay(fcport); |
| qlt_schedule_sess_for_deletion(fcport); |
| return; |
| } |
| |
| switch (ls) { |
| case PDS_PRLI_COMPLETE: |
| __qla24xx_parse_gpdb(vha, fcport, pd); |
| break; |
| case PDS_PLOGI_PENDING: |
| case PDS_PLOGI_COMPLETE: |
| case PDS_PRLI_PENDING: |
| case PDS_PRLI2_PENDING: |
| /* Set discovery state back to GNL to Relogin attempt */ |
| if (qla_dual_mode_enabled(vha) || |
| qla_ini_mode_enabled(vha)) { |
| fcport->disc_state = DSC_GNL; |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| } |
| return; |
| case PDS_LOGO_PENDING: |
| case PDS_PORT_UNAVAILABLE: |
| default: |
| ql_dbg(ql_dbg_disc, vha, 0x20d5, "%s %d %8phC post del sess\n", |
| __func__, __LINE__, fcport->port_name); |
| qlt_schedule_sess_for_deletion(fcport); |
| return; |
| } |
| __qla24xx_handle_gpdb_event(vha, ea); |
| } /* gpdb event */ |
| |
| static void qla_chk_n2n_b4_login(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| u8 login = 0; |
| int rc; |
| |
| if (qla_tgt_mode_enabled(vha)) |
| return; |
| |
| if (qla_dual_mode_enabled(vha)) { |
| if (N2N_TOPO(vha->hw)) { |
| u64 mywwn, wwn; |
| |
| mywwn = wwn_to_u64(vha->port_name); |
| wwn = wwn_to_u64(fcport->port_name); |
| if (mywwn > wwn) |
| login = 1; |
| else if ((fcport->fw_login_state == DSC_LS_PLOGI_COMP) |
| && time_after_eq(jiffies, |
| fcport->plogi_nack_done_deadline)) |
| login = 1; |
| } else { |
| login = 1; |
| } |
| } else { |
| /* initiator mode */ |
| login = 1; |
| } |
| |
| if (login && fcport->login_retry) { |
| fcport->login_retry--; |
| if (fcport->loop_id == FC_NO_LOOP_ID) { |
| fcport->fw_login_state = DSC_LS_PORT_UNAVAIL; |
| rc = qla2x00_find_new_loop_id(vha, fcport); |
| if (rc) { |
| ql_dbg(ql_dbg_disc, vha, 0x20e6, |
| "%s %d %8phC post del sess - out of loopid\n", |
| __func__, __LINE__, fcport->port_name); |
| fcport->scan_state = 0; |
| qlt_schedule_sess_for_deletion(fcport); |
| return; |
| } |
| } |
| ql_dbg(ql_dbg_disc, vha, 0x20bf, |
| "%s %d %8phC post login\n", |
| __func__, __LINE__, fcport->port_name); |
| qla2x00_post_async_login_work(vha, fcport, NULL); |
| } |
| } |
| |
| int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| u16 data[2]; |
| u64 wwn; |
| u16 sec; |
| |
| ql_dbg(ql_dbg_disc + ql_dbg_verbose, vha, 0x20d8, |
| "%s %8phC DS %d LS %d P %d fl %x confl %p rscn %d|%d login %d lid %d scan %d\n", |
| __func__, fcport->port_name, fcport->disc_state, |
| fcport->fw_login_state, fcport->login_pause, fcport->flags, |
| fcport->conflict, fcport->last_rscn_gen, fcport->rscn_gen, |
| fcport->login_gen, fcport->loop_id, fcport->scan_state); |
| |
| if (fcport->scan_state != QLA_FCPORT_FOUND) |
| return 0; |
| |
| if ((fcport->loop_id != FC_NO_LOOP_ID) && |
| ((fcport->fw_login_state == DSC_LS_PLOGI_PEND) || |
| (fcport->fw_login_state == DSC_LS_PRLI_PEND))) |
| return 0; |
| |
| if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) { |
| if (time_before_eq(jiffies, fcport->plogi_nack_done_deadline)) { |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| return 0; |
| } |
| } |
| |
| /* for pure Target Mode. Login will not be initiated */ |
| if (vha->host->active_mode == MODE_TARGET) |
| return 0; |
| |
| if (fcport->flags & FCF_ASYNC_SENT) { |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| return 0; |
| } |
| |
| switch (fcport->disc_state) { |
| case DSC_DELETED: |
| wwn = wwn_to_u64(fcport->node_name); |
| switch (vha->hw->current_topology) { |
| case ISP_CFG_N: |
| if (fcport_is_smaller(fcport)) { |
| /* this adapter is bigger */ |
| if (fcport->login_retry) { |
| if (fcport->loop_id == FC_NO_LOOP_ID) { |
| qla2x00_find_new_loop_id(vha, |
| fcport); |
| fcport->fw_login_state = |
| DSC_LS_PORT_UNAVAIL; |
| } |
| fcport->login_retry--; |
| qla_post_els_plogi_work(vha, fcport); |
| } else { |
| ql_log(ql_log_info, vha, 0x705d, |
| "Unable to reach remote port %8phC", |
| fcport->port_name); |
| } |
| } else { |
| qla24xx_post_gnl_work(vha, fcport); |
| } |
| break; |
| default: |
| if (wwn == 0) { |
| ql_dbg(ql_dbg_disc, vha, 0xffff, |
| "%s %d %8phC post GNNID\n", |
| __func__, __LINE__, fcport->port_name); |
| qla24xx_post_gnnid_work(vha, fcport); |
| } else if (fcport->loop_id == FC_NO_LOOP_ID) { |
| ql_dbg(ql_dbg_disc, vha, 0x20bd, |
| "%s %d %8phC post gnl\n", |
| __func__, __LINE__, fcport->port_name); |
| qla24xx_post_gnl_work(vha, fcport); |
| } else { |
| qla_chk_n2n_b4_login(vha, fcport); |
| } |
| break; |
| } |
| break; |
| |
| case DSC_GNL: |
| switch (vha->hw->current_topology) { |
| case ISP_CFG_N: |
| if ((fcport->current_login_state & 0xf) == 0x6) { |
| ql_dbg(ql_dbg_disc, vha, 0x2118, |
| "%s %d %8phC post GPDB work\n", |
| __func__, __LINE__, fcport->port_name); |
| fcport->chip_reset = |
| vha->hw->base_qpair->chip_reset; |
| qla24xx_post_gpdb_work(vha, fcport, 0); |
| } else { |
| ql_dbg(ql_dbg_disc, vha, 0x2118, |
| "%s %d %8phC post NVMe PRLI\n", |
| __func__, __LINE__, fcport->port_name); |
| qla24xx_post_prli_work(vha, fcport); |
| } |
| break; |
| default: |
| if (fcport->login_pause) { |
| fcport->last_rscn_gen = fcport->rscn_gen; |
| fcport->last_login_gen = fcport->login_gen; |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| break; |
| } |
| qla_chk_n2n_b4_login(vha, fcport); |
| break; |
| } |
| break; |
| |
| case DSC_LOGIN_FAILED: |
| if (N2N_TOPO(vha->hw)) |
| qla_chk_n2n_b4_login(vha, fcport); |
| else |
| qlt_schedule_sess_for_deletion(fcport); |
| break; |
| |
| case DSC_LOGIN_COMPLETE: |
| /* recheck login state */ |
| data[0] = data[1] = 0; |
| qla2x00_post_async_adisc_work(vha, fcport, data); |
| break; |
| |
| case DSC_LOGIN_PEND: |
| if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) |
| qla24xx_post_prli_work(vha, fcport); |
| break; |
| |
| case DSC_UPD_FCPORT: |
| sec = jiffies_to_msecs(jiffies - |
| fcport->jiffies_at_registration)/1000; |
| if (fcport->sec_since_registration < sec && sec && |
| !(sec % 60)) { |
| fcport->sec_since_registration = sec; |
| ql_dbg(ql_dbg_disc, fcport->vha, 0xffff, |
| "%s %8phC - Slow Rport registration(%d Sec)\n", |
| __func__, fcport->port_name, sec); |
| } |
| |
| if (fcport->next_disc_state != DSC_DELETE_PEND) |
| fcport->next_disc_state = DSC_ADISC; |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| break; |
| |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int qla24xx_post_newsess_work(struct scsi_qla_host *vha, port_id_t *id, |
| u8 *port_name, u8 *node_name, void *pla, u8 fc4_type) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_NEW_SESS); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| e->u.new_sess.id = *id; |
| e->u.new_sess.pla = pla; |
| e->u.new_sess.fc4_type = fc4_type; |
| memcpy(e->u.new_sess.port_name, port_name, WWN_SIZE); |
| if (node_name) |
| memcpy(e->u.new_sess.node_name, node_name, WWN_SIZE); |
| |
| return qla2x00_post_work(vha, e); |
| } |
| |
| static |
| void qla24xx_handle_relogin_event(scsi_qla_host_t *vha, |
| struct event_arg *ea) |
| { |
| fc_port_t *fcport = ea->fcport; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x2102, |
| "%s %8phC DS %d LS %d P %d del %d cnfl %p rscn %d|%d login %d|%d fl %x\n", |
| __func__, fcport->port_name, fcport->disc_state, |
| fcport->fw_login_state, fcport->login_pause, |
| fcport->deleted, fcport->conflict, |
| fcport->last_rscn_gen, fcport->rscn_gen, |
| fcport->last_login_gen, fcport->login_gen, |
| fcport->flags); |
| |
| if ((fcport->fw_login_state == DSC_LS_PLOGI_PEND) || |
| (fcport->fw_login_state == DSC_LS_PRLI_PEND)) |
| return; |
| |
| if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) { |
| if (time_before_eq(jiffies, fcport->plogi_nack_done_deadline)) { |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| return; |
| } |
| } |
| |
| if (fcport->last_rscn_gen != fcport->rscn_gen) { |
| ql_dbg(ql_dbg_disc, vha, 0x20e9, "%s %d %8phC post gidpn\n", |
| __func__, __LINE__, fcport->port_name); |
| |
| return; |
| } |
| |
| qla24xx_fcport_handle_login(vha, fcport); |
| } |
| |
| |
| static void qla_handle_els_plogi_done(scsi_qla_host_t *vha, |
| struct event_arg *ea) |
| { |
| ql_dbg(ql_dbg_disc, vha, 0x2118, |
| "%s %d %8phC post PRLI\n", |
| __func__, __LINE__, ea->fcport->port_name); |
| qla24xx_post_prli_work(vha, ea->fcport); |
| } |
| |
| void qla2x00_fcport_event_handler(scsi_qla_host_t *vha, struct event_arg *ea) |
| { |
| fc_port_t *fcport; |
| |
| switch (ea->event) { |
| case FCME_RELOGIN: |
| if (test_bit(UNLOADING, &vha->dpc_flags)) |
| return; |
| |
| qla24xx_handle_relogin_event(vha, ea); |
| break; |
| case FCME_RSCN: |
| if (test_bit(UNLOADING, &vha->dpc_flags)) |
| return; |
| { |
| unsigned long flags; |
| |
| fcport = qla2x00_find_fcport_by_nportid |
| (vha, &ea->id, 1); |
| if (fcport) { |
| fcport->scan_needed = 1; |
| fcport->rscn_gen++; |
| } |
| |
| spin_lock_irqsave(&vha->work_lock, flags); |
| if (vha->scan.scan_flags == 0) { |
| ql_dbg(ql_dbg_disc, vha, 0xffff, |
| "%s: schedule\n", __func__); |
| vha->scan.scan_flags |= SF_QUEUED; |
| schedule_delayed_work(&vha->scan.scan_work, 5); |
| } |
| spin_unlock_irqrestore(&vha->work_lock, flags); |
| } |
| break; |
| case FCME_GNL_DONE: |
| qla24xx_handle_gnl_done_event(vha, ea); |
| break; |
| case FCME_GPSC_DONE: |
| qla24xx_handle_gpsc_event(vha, ea); |
| break; |
| case FCME_PLOGI_DONE: /* Initiator side sent LLIOCB */ |
| qla24xx_handle_plogi_done_event(vha, ea); |
| break; |
| case FCME_PRLI_DONE: |
| qla24xx_handle_prli_done_event(vha, ea); |
| break; |
| case FCME_GPDB_DONE: |
| qla24xx_handle_gpdb_event(vha, ea); |
| break; |
| case FCME_GPNID_DONE: |
| qla24xx_handle_gpnid_event(vha, ea); |
| break; |
| case FCME_GFFID_DONE: |
| qla24xx_handle_gffid_event(vha, ea); |
| break; |
| case FCME_ADISC_DONE: |
| qla24xx_handle_adisc_event(vha, ea); |
| break; |
| case FCME_GNNID_DONE: |
| qla24xx_handle_gnnid_event(vha, ea); |
| break; |
| case FCME_GFPNID_DONE: |
| qla24xx_handle_gfpnid_event(vha, ea); |
| break; |
| case FCME_ELS_PLOGI_DONE: |
| qla_handle_els_plogi_done(vha, ea); |
| break; |
| default: |
| BUG_ON(1); |
| break; |
| } |
| } |
| |
| /* |
| * RSCN(s) came in for this fcport, but the RSCN(s) was not able |
| * to be consumed by the fcport |
| */ |
| void qla_rscn_replay(fc_port_t *fcport) |
| { |
| struct event_arg ea; |
| |
| switch (fcport->disc_state) { |
| case DSC_DELETE_PEND: |
| return; |
| default: |
| break; |
| } |
| |
| if (fcport->scan_needed) { |
| memset(&ea, 0, sizeof(ea)); |
| ea.event = FCME_RSCN; |
| ea.id = fcport->d_id; |
| ea.id.b.rsvd_1 = RSCN_PORT_ADDR; |
| qla2x00_fcport_event_handler(fcport->vha, &ea); |
| } |
| } |
| |
| static void |
| qla2x00_tmf_iocb_timeout(void *data) |
| { |
| srb_t *sp = data; |
| struct srb_iocb *tmf = &sp->u.iocb_cmd; |
| |
| tmf->u.tmf.comp_status = CS_TIMEOUT; |
| complete(&tmf->u.tmf.comp); |
| } |
| |
| static void |
| qla2x00_tmf_sp_done(void *ptr, int res) |
| { |
| srb_t *sp = ptr; |
| struct srb_iocb *tmf = &sp->u.iocb_cmd; |
| |
| complete(&tmf->u.tmf.comp); |
| } |
| |
| int |
| qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun, |
| uint32_t tag) |
| { |
| struct scsi_qla_host *vha = fcport->vha; |
| struct srb_iocb *tm_iocb; |
| srb_t *sp; |
| int rval = QLA_FUNCTION_FAILED; |
| |
| sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); |
| if (!sp) |
| goto done; |
| |
| tm_iocb = &sp->u.iocb_cmd; |
| sp->type = SRB_TM_CMD; |
| sp->name = "tmf"; |
| |
| tm_iocb->timeout = qla2x00_tmf_iocb_timeout; |
| init_completion(&tm_iocb->u.tmf.comp); |
| qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha)); |
| |
| tm_iocb->u.tmf.flags = flags; |
| tm_iocb->u.tmf.lun = lun; |
| tm_iocb->u.tmf.data = tag; |
| sp->done = qla2x00_tmf_sp_done; |
| |
| ql_dbg(ql_dbg_taskm, vha, 0x802f, |
| "Async-tmf hdl=%x loop-id=%x portid=%02x%02x%02x.\n", |
| sp->handle, fcport->loop_id, fcport->d_id.b.domain, |
| fcport->d_id.b.area, fcport->d_id.b.al_pa); |
| |
| rval = qla2x00_start_sp(sp); |
| if (rval != QLA_SUCCESS) |
| goto done_free_sp; |
| wait_for_completion(&tm_iocb->u.tmf.comp); |
| |
| rval = tm_iocb->u.tmf.data; |
| |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x8030, |
| "TM IOCB failed (%x).\n", rval); |
| } |
| |
| if (!test_bit(UNLOADING, &vha->dpc_flags) && !IS_QLAFX00(vha->hw)) { |
| flags = tm_iocb->u.tmf.flags; |
| lun = (uint16_t)tm_iocb->u.tmf.lun; |
| |
| /* Issue Marker IOCB */ |
| qla2x00_marker(vha, vha->hw->base_qpair, |
| fcport->loop_id, lun, |
| flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID); |
| } |
| |
| done_free_sp: |
| sp->free(sp); |
| fcport->flags &= ~FCF_ASYNC_SENT; |
| done: |
| return rval; |
| } |
| |
| int |
| qla24xx_async_abort_command(srb_t *sp) |
| { |
| unsigned long flags = 0; |
| |
| uint32_t handle; |
| fc_port_t *fcport = sp->fcport; |
| struct qla_qpair *qpair = sp->qpair; |
| struct scsi_qla_host *vha = fcport->vha; |
| struct req_que *req = qpair->req; |
| |
| spin_lock_irqsave(qpair->qp_lock_ptr, flags); |
| for (handle = 1; handle < req->num_outstanding_cmds; handle++) { |
| if (req->outstanding_cmds[handle] == sp) |
| break; |
| } |
| spin_unlock_irqrestore(qpair->qp_lock_ptr, flags); |
| |
| if (handle == req->num_outstanding_cmds) { |
| /* Command not found. */ |
| return QLA_FUNCTION_FAILED; |
| } |
| if (sp->type == SRB_FXIOCB_DCMD) |
| return qlafx00_fx_disc(vha, &vha->hw->mr.fcport, |
| FXDISC_ABORT_IOCTL); |
| |
| return qla24xx_async_abort_cmd(sp, true); |
| } |
| |
| static void |
| qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea) |
| { |
| switch (ea->data[0]) { |
| case MBS_COMMAND_COMPLETE: |
| ql_dbg(ql_dbg_disc, vha, 0x2118, |
| "%s %d %8phC post gpdb\n", |
| __func__, __LINE__, ea->fcport->port_name); |
| |
| ea->fcport->chip_reset = vha->hw->base_qpair->chip_reset; |
| ea->fcport->logout_on_delete = 1; |
| ea->fcport->nvme_prli_service_param = ea->iop[0]; |
| if (ea->iop[0] & NVME_PRLI_SP_FIRST_BURST) |
| ea->fcport->nvme_first_burst_size = |
| (ea->iop[1] & 0xffff) * 512; |
| else |
| ea->fcport->nvme_first_burst_size = 0; |
| qla24xx_post_gpdb_work(vha, ea->fcport, 0); |
| break; |
| default: |
| if ((ea->iop[0] == LSC_SCODE_ELS_REJECT) && |
| (ea->iop[1] == 0x50000)) { /* reson 5=busy expl:0x0 */ |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| ea->fcport->fw_login_state = DSC_LS_PLOGI_COMP; |
| break; |
| } |
| |
| if (ea->fcport->n2n_flag) { |
| ql_dbg(ql_dbg_disc, vha, 0x2118, |
| "%s %d %8phC post fc4 prli\n", |
| __func__, __LINE__, ea->fcport->port_name); |
| ea->fcport->fc4f_nvme = 0; |
| ea->fcport->n2n_flag = 0; |
| qla24xx_post_prli_work(vha, ea->fcport); |
| } |
| ql_dbg(ql_dbg_disc, vha, 0x2119, |
| "%s %d %8phC unhandle event of %x\n", |
| __func__, __LINE__, ea->fcport->port_name, ea->data[0]); |
| break; |
| } |
| } |
| |
| static void |
| qla24xx_handle_plogi_done_event(struct scsi_qla_host *vha, struct event_arg *ea) |
| { |
| port_id_t cid; /* conflict Nport id */ |
| u16 lid; |
| struct fc_port *conflict_fcport; |
| unsigned long flags; |
| struct fc_port *fcport = ea->fcport; |
| |
| ql_dbg(ql_dbg_disc, vha, 0xffff, |
| "%s %8phC DS %d LS %d rc %d login %d|%d rscn %d|%d data %x|%x iop %x|%x\n", |
| __func__, fcport->port_name, fcport->disc_state, |
| fcport->fw_login_state, ea->rc, ea->sp->gen2, fcport->login_gen, |
| ea->sp->gen1, fcport->rscn_gen, |
| ea->data[0], ea->data[1], ea->iop[0], ea->iop[1]); |
| |
| if ((fcport->fw_login_state == DSC_LS_PLOGI_PEND) || |
| (fcport->fw_login_state == DSC_LS_PRLI_PEND)) { |
| ql_dbg(ql_dbg_disc, vha, 0x20ea, |
| "%s %d %8phC Remote is trying to login\n", |
| __func__, __LINE__, fcport->port_name); |
| return; |
| } |
| |
| if (fcport->disc_state == DSC_DELETE_PEND) |
| return; |
| |
| if (ea->sp->gen2 != fcport->login_gen) { |
| /* target side must have changed it. */ |
| ql_dbg(ql_dbg_disc, vha, 0x20d3, |
| "%s %8phC generation changed\n", |
| __func__, fcport->port_name); |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| return; |
| } else if (ea->sp->gen1 != fcport->rscn_gen) { |
| ql_dbg(ql_dbg_disc, vha, 0x20d3, |
| "%s %8phC RSCN generation changed\n", |
| __func__, fcport->port_name); |
| qla_rscn_replay(fcport); |
| qlt_schedule_sess_for_deletion(fcport); |
| return; |
| } |
| |
| switch (ea->data[0]) { |
| case MBS_COMMAND_COMPLETE: |
| /* |
| * Driver must validate login state - If PRLI not complete, |
| * force a relogin attempt via implicit LOGO, PLOGI, and PRLI |
| * requests. |
| */ |
| if (ea->fcport->fc4f_nvme) { |
| ql_dbg(ql_dbg_disc, vha, 0x2117, |
| "%s %d %8phC post prli\n", |
| __func__, __LINE__, ea->fcport->port_name); |
| qla24xx_post_prli_work(vha, ea->fcport); |
| } else { |
| ql_dbg(ql_dbg_disc, vha, 0x20ea, |
| "%s %d %8phC LoopID 0x%x in use with %06x. post gnl\n", |
| __func__, __LINE__, ea->fcport->port_name, |
| ea->fcport->loop_id, ea->fcport->d_id.b24); |
| |
| set_bit(ea->fcport->loop_id, vha->hw->loop_id_map); |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| ea->fcport->chip_reset = vha->hw->base_qpair->chip_reset; |
| ea->fcport->logout_on_delete = 1; |
| ea->fcport->send_els_logo = 0; |
| ea->fcport->fw_login_state = DSC_LS_PRLI_COMP; |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| |
| qla24xx_post_gpdb_work(vha, ea->fcport, 0); |
| } |
| break; |
| case MBS_COMMAND_ERROR: |
| ql_dbg(ql_dbg_disc, vha, 0x20eb, "%s %d %8phC cmd error %x\n", |
| __func__, __LINE__, ea->fcport->port_name, ea->data[1]); |
| |
| ea->fcport->flags &= ~FCF_ASYNC_SENT; |
| ea->fcport->disc_state = DSC_LOGIN_FAILED; |
| if (ea->data[1] & QLA_LOGIO_LOGIN_RETRIED) |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| else |
| qla2x00_mark_device_lost(vha, ea->fcport, 1, 0); |
| break; |
| case MBS_LOOP_ID_USED: |
| /* data[1] = IO PARAM 1 = nport ID */ |
| cid.b.domain = (ea->iop[1] >> 16) & 0xff; |
| cid.b.area = (ea->iop[1] >> 8) & 0xff; |
| cid.b.al_pa = ea->iop[1] & 0xff; |
| cid.b.rsvd_1 = 0; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20ec, |
| "%s %d %8phC lid %#x in use with pid %06x post gnl\n", |
| __func__, __LINE__, ea->fcport->port_name, |
| ea->fcport->loop_id, cid.b24); |
| |
| set_bit(ea->fcport->loop_id, vha->hw->loop_id_map); |
| ea->fcport->loop_id = FC_NO_LOOP_ID; |
| qla24xx_post_gnl_work(vha, ea->fcport); |
| break; |
| case MBS_PORT_ID_USED: |
| lid = ea->iop[1] & 0xffff; |
| qlt_find_sess_invalidate_other(vha, |
| wwn_to_u64(ea->fcport->port_name), |
| ea->fcport->d_id, lid, &conflict_fcport); |
| |
| if (conflict_fcport) { |
| /* |
| * Another fcport share the same loop_id/nport id. |
| * Conflict fcport needs to finish cleanup before this |
| * fcport can proceed to login. |
| */ |
| conflict_fcport->conflict = ea->fcport; |
| ea->fcport->login_pause = 1; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20ed, |
| "%s %d %8phC NPortId %06x inuse with loopid 0x%x. post gidpn\n", |
| __func__, __LINE__, ea->fcport->port_name, |
| ea->fcport->d_id.b24, lid); |
| } else { |
| ql_dbg(ql_dbg_disc, vha, 0x20ed, |
| "%s %d %8phC NPortId %06x inuse with loopid 0x%x. sched delete\n", |
| __func__, __LINE__, ea->fcport->port_name, |
| ea->fcport->d_id.b24, lid); |
| |
| qla2x00_clear_loop_id(ea->fcport); |
| set_bit(lid, vha->hw->loop_id_map); |
| ea->fcport->loop_id = lid; |
| ea->fcport->keep_nport_handle = 0; |
| qlt_schedule_sess_for_deletion(ea->fcport); |
| } |
| break; |
| } |
| return; |
| } |
| |
| void |
| qla2x00_async_logout_done(struct scsi_qla_host *vha, fc_port_t *fcport, |
| uint16_t *data) |
| { |
| qlt_logo_completion_handler(fcport, data[0]); |
| fcport->login_gen++; |
| fcport->flags &= ~FCF_ASYNC_ACTIVE; |
| return; |
| } |
| |
| /****************************************************************************/ |
| /* QLogic ISP2x00 Hardware Support Functions. */ |
| /****************************************************************************/ |
| |
| static int |
| qla83xx_nic_core_fw_load(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t idc_major_ver, idc_minor_ver; |
| uint16_t config[4]; |
| |
| qla83xx_idc_lock(vha, 0); |
| |
| /* SV: TODO: Assign initialization timeout from |
| * flash-info / other param |
| */ |
| ha->fcoe_dev_init_timeout = QLA83XX_IDC_INITIALIZATION_TIMEOUT; |
| ha->fcoe_reset_timeout = QLA83XX_IDC_RESET_ACK_TIMEOUT; |
| |
| /* Set our fcoe function presence */ |
| if (__qla83xx_set_drv_presence(vha) != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb077, |
| "Error while setting DRV-Presence.\n"); |
| rval = QLA_FUNCTION_FAILED; |
| goto exit; |
| } |
| |
| /* Decide the reset ownership */ |
| qla83xx_reset_ownership(vha); |
| |
| /* |
| * On first protocol driver load: |
| * Init-Owner: Set IDC-Major-Version and Clear IDC-Lock-Recovery |
| * register. |
| * Others: Check compatibility with current IDC Major version. |
| */ |
| qla83xx_rd_reg(vha, QLA83XX_IDC_MAJOR_VERSION, &idc_major_ver); |
| if (ha->flags.nic_core_reset_owner) { |
| /* Set IDC Major version */ |
| idc_major_ver = QLA83XX_SUPP_IDC_MAJOR_VERSION; |
| qla83xx_wr_reg(vha, QLA83XX_IDC_MAJOR_VERSION, idc_major_ver); |
| |
| /* Clearing IDC-Lock-Recovery register */ |
| qla83xx_wr_reg(vha, QLA83XX_IDC_LOCK_RECOVERY, 0); |
| } else if (idc_major_ver != QLA83XX_SUPP_IDC_MAJOR_VERSION) { |
| /* |
| * Clear further IDC participation if we are not compatible with |
| * the current IDC Major Version. |
| */ |
| ql_log(ql_log_warn, vha, 0xb07d, |
| "Failing load, idc_major_ver=%d, expected_major_ver=%d.\n", |
| idc_major_ver, QLA83XX_SUPP_IDC_MAJOR_VERSION); |
| __qla83xx_clear_drv_presence(vha); |
| rval = QLA_FUNCTION_FAILED; |
| goto exit; |
| } |
| /* Each function sets its supported Minor version. */ |
| qla83xx_rd_reg(vha, QLA83XX_IDC_MINOR_VERSION, &idc_minor_ver); |
| idc_minor_ver |= (QLA83XX_SUPP_IDC_MINOR_VERSION << (ha->portnum * 2)); |
| qla83xx_wr_reg(vha, QLA83XX_IDC_MINOR_VERSION, idc_minor_ver); |
| |
| if (ha->flags.nic_core_reset_owner) { |
| memset(config, 0, sizeof(config)); |
| if (!qla81xx_get_port_config(vha, config)) |
| qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, |
| QLA8XXX_DEV_READY); |
| } |
| |
| rval = qla83xx_idc_state_handler(vha); |
| |
| exit: |
| qla83xx_idc_unlock(vha, 0); |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_initialize_adapter |
| * Initialize board. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * 0 = success |
| */ |
| int |
| qla2x00_initialize_adapter(scsi_qla_host_t *vha) |
| { |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| |
| memset(&vha->qla_stats, 0, sizeof(vha->qla_stats)); |
| memset(&vha->fc_host_stat, 0, sizeof(vha->fc_host_stat)); |
| |
| /* Clear adapter flags. */ |
| vha->flags.online = 0; |
| ha->flags.chip_reset_done = 0; |
| vha->flags.reset_active = 0; |
| ha->flags.pci_channel_io_perm_failure = 0; |
| ha->flags.eeh_busy = 0; |
| vha->qla_stats.jiffies_at_last_reset = get_jiffies_64(); |
| atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); |
| atomic_set(&vha->loop_state, LOOP_DOWN); |
| vha->device_flags = DFLG_NO_CABLE; |
| vha->dpc_flags = 0; |
| vha->flags.management_server_logged_in = 0; |
| vha->marker_needed = 0; |
| ha->isp_abort_cnt = 0; |
| ha->beacon_blink_led = 0; |
| |
| set_bit(0, ha->req_qid_map); |
| set_bit(0, ha->rsp_qid_map); |
| |
| ql_dbg(ql_dbg_init, vha, 0x0040, |
| "Configuring PCI space...\n"); |
| rval = ha->isp_ops->pci_config(vha); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x0044, |
| "Unable to configure PCI space.\n"); |
| return (rval); |
| } |
| |
| ha->isp_ops->reset_chip(vha); |
| |
| /* Check for secure flash support */ |
| if (IS_QLA28XX(ha)) { |
| if (RD_REG_DWORD(®->mailbox12) & BIT_0) { |
| ql_log(ql_log_info, vha, 0xffff, "Adapter is Secure\n"); |
| ha->flags.secure_adapter = 1; |
| } |
| } |
| |
| |
| rval = qla2xxx_get_flash_info(vha); |
| if (rval) { |
| ql_log(ql_log_fatal, vha, 0x004f, |
| "Unable to validate FLASH data.\n"); |
| return rval; |
| } |
| |
| if (IS_QLA8044(ha)) { |
| qla8044_read_reset_template(vha); |
| |
| /* NOTE: If ql2xdontresethba==1, set IDC_CTRL DONTRESET_BIT0. |
| * If DONRESET_BIT0 is set, drivers should not set dev_state |
| * to NEED_RESET. But if NEED_RESET is set, drivers should |
| * should honor the reset. */ |
| if (ql2xdontresethba == 1) |
| qla8044_set_idc_dontreset(vha); |
| } |
| |
| ha->isp_ops->get_flash_version(vha, req->ring); |
| ql_dbg(ql_dbg_init, vha, 0x0061, |
| "Configure NVRAM parameters...\n"); |
| |
| ha->isp_ops->nvram_config(vha); |
| |
| if (ha->flags.disable_serdes) { |
| /* Mask HBA via NVRAM settings? */ |
| ql_log(ql_log_info, vha, 0x0077, |
| "Masking HBA WWPN %8phN (via NVRAM).\n", vha->port_name); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| ql_dbg(ql_dbg_init, vha, 0x0078, |
| "Verifying loaded RISC code...\n"); |
| |
| if (qla2x00_isp_firmware(vha) != QLA_SUCCESS) { |
| rval = ha->isp_ops->chip_diag(vha); |
| if (rval) |
| return (rval); |
| rval = qla2x00_setup_chip(vha); |
| if (rval) |
| return (rval); |
| } |
| |
| if (IS_QLA84XX(ha)) { |
| ha->cs84xx = qla84xx_get_chip(vha); |
| if (!ha->cs84xx) { |
| ql_log(ql_log_warn, vha, 0x00d0, |
| "Unable to configure ISP84XX.\n"); |
| return QLA_FUNCTION_FAILED; |
| } |
| } |
| |
| if (qla_ini_mode_enabled(vha) || qla_dual_mode_enabled(vha)) |
| rval = qla2x00_init_rings(vha); |
| |
| ha->flags.chip_reset_done = 1; |
| |
| if (rval == QLA_SUCCESS && IS_QLA84XX(ha)) { |
| /* Issue verify 84xx FW IOCB to complete 84xx initialization */ |
| rval = qla84xx_init_chip(vha); |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x00d4, |
| "Unable to initialize ISP84XX.\n"); |
| qla84xx_put_chip(vha); |
| } |
| } |
| |
| /* Load the NIC Core f/w if we are the first protocol driver. */ |
| if (IS_QLA8031(ha)) { |
| rval = qla83xx_nic_core_fw_load(vha); |
| if (rval) |
| ql_log(ql_log_warn, vha, 0x0124, |
| "Error in initializing NIC Core f/w.\n"); |
| } |
| |
| if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) |
| qla24xx_read_fcp_prio_cfg(vha); |
| |
| if (IS_P3P_TYPE(ha)) |
| qla82xx_set_driver_version(vha, QLA2XXX_VERSION); |
| else |
| qla25xx_set_driver_version(vha, QLA2XXX_VERSION); |
| |
| return (rval); |
| } |
| |
| /** |
| * qla2100_pci_config() - Setup ISP21xx PCI configuration registers. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla2100_pci_config(scsi_qla_host_t *vha) |
| { |
| uint16_t w; |
| unsigned long flags; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| |
| pci_set_master(ha->pdev); |
| pci_try_set_mwi(ha->pdev); |
| |
| pci_read_config_word(ha->pdev, PCI_COMMAND, &w); |
| w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); |
| pci_write_config_word(ha->pdev, PCI_COMMAND, w); |
| |
| pci_disable_rom(ha->pdev); |
| |
| /* Get PCI bus information. */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ha->pci_attr = RD_REG_WORD(®->ctrl_status); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla2300_pci_config() - Setup ISP23xx PCI configuration registers. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla2300_pci_config(scsi_qla_host_t *vha) |
| { |
| uint16_t w; |
| unsigned long flags = 0; |
| uint32_t cnt; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| |
| pci_set_master(ha->pdev); |
| pci_try_set_mwi(ha->pdev); |
| |
| pci_read_config_word(ha->pdev, PCI_COMMAND, &w); |
| w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); |
| |
| if (IS_QLA2322(ha) || IS_QLA6322(ha)) |
| w &= ~PCI_COMMAND_INTX_DISABLE; |
| pci_write_config_word(ha->pdev, PCI_COMMAND, w); |
| |
| /* |
| * If this is a 2300 card and not 2312, reset the |
| * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately, |
| * the 2310 also reports itself as a 2300 so we need to get the |
| * fb revision level -- a 6 indicates it really is a 2300 and |
| * not a 2310. |
| */ |
| if (IS_QLA2300(ha)) { |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Pause RISC. */ |
| WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); |
| for (cnt = 0; cnt < 30000; cnt++) { |
| if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0) |
| break; |
| |
| udelay(10); |
| } |
| |
| /* Select FPM registers. */ |
| WRT_REG_WORD(®->ctrl_status, 0x20); |
| RD_REG_WORD(®->ctrl_status); |
| |
| /* Get the fb rev level */ |
| ha->fb_rev = RD_FB_CMD_REG(ha, reg); |
| |
| if (ha->fb_rev == FPM_2300) |
| pci_clear_mwi(ha->pdev); |
| |
| /* Deselect FPM registers. */ |
| WRT_REG_WORD(®->ctrl_status, 0x0); |
| RD_REG_WORD(®->ctrl_status); |
| |
| /* Release RISC module. */ |
| WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| for (cnt = 0; cnt < 30000; cnt++) { |
| if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) == 0) |
| break; |
| |
| udelay(10); |
| } |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| } |
| |
| pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); |
| |
| pci_disable_rom(ha->pdev); |
| |
| /* Get PCI bus information. */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ha->pci_attr = RD_REG_WORD(®->ctrl_status); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla24xx_pci_config() - Setup ISP24xx PCI configuration registers. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla24xx_pci_config(scsi_qla_host_t *vha) |
| { |
| uint16_t w; |
| unsigned long flags = 0; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| |
| pci_set_master(ha->pdev); |
| pci_try_set_mwi(ha->pdev); |
| |
| pci_read_config_word(ha->pdev, PCI_COMMAND, &w); |
| w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); |
| w &= ~PCI_COMMAND_INTX_DISABLE; |
| pci_write_config_word(ha->pdev, PCI_COMMAND, w); |
| |
| pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); |
| |
| /* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */ |
| if (pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX)) |
| pcix_set_mmrbc(ha->pdev, 2048); |
| |
| /* PCIe -- adjust Maximum Read Request Size (2048). */ |
| if (pci_is_pcie(ha->pdev)) |
| pcie_set_readrq(ha->pdev, 4096); |
| |
| pci_disable_rom(ha->pdev); |
| |
| ha->chip_revision = ha->pdev->revision; |
| |
| /* Get PCI bus information. */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ha->pci_attr = RD_REG_DWORD(®->ctrl_status); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla25xx_pci_config() - Setup ISP25xx PCI configuration registers. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla25xx_pci_config(scsi_qla_host_t *vha) |
| { |
| uint16_t w; |
| struct qla_hw_data *ha = vha->hw; |
| |
| pci_set_master(ha->pdev); |
| pci_try_set_mwi(ha->pdev); |
| |
| pci_read_config_word(ha->pdev, PCI_COMMAND, &w); |
| w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); |
| w &= ~PCI_COMMAND_INTX_DISABLE; |
| pci_write_config_word(ha->pdev, PCI_COMMAND, w); |
| |
| /* PCIe -- adjust Maximum Read Request Size (2048). */ |
| if (pci_is_pcie(ha->pdev)) |
| pcie_set_readrq(ha->pdev, 4096); |
| |
| pci_disable_rom(ha->pdev); |
| |
| ha->chip_revision = ha->pdev->revision; |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla2x00_isp_firmware() - Choose firmware image. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| static int |
| qla2x00_isp_firmware(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint16_t loop_id, topo, sw_cap; |
| uint8_t domain, area, al_pa; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Assume loading risc code */ |
| rval = QLA_FUNCTION_FAILED; |
| |
| if (ha->flags.disable_risc_code_load) { |
| ql_log(ql_log_info, vha, 0x0079, "RISC CODE NOT loaded.\n"); |
| |
| /* Verify checksum of loaded RISC code. */ |
| rval = qla2x00_verify_checksum(vha, ha->fw_srisc_address); |
| if (rval == QLA_SUCCESS) { |
| /* And, verify we are not in ROM code. */ |
| rval = qla2x00_get_adapter_id(vha, &loop_id, &al_pa, |
| &area, &domain, &topo, &sw_cap); |
| } |
| } |
| |
| if (rval) |
| ql_dbg(ql_dbg_init, vha, 0x007a, |
| "**** Load RISC code ****.\n"); |
| |
| return (rval); |
| } |
| |
| /** |
| * qla2x00_reset_chip() - Reset ISP chip. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla2x00_reset_chip(scsi_qla_host_t *vha) |
| { |
| unsigned long flags = 0; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| uint32_t cnt; |
| uint16_t cmd; |
| int rval = QLA_FUNCTION_FAILED; |
| |
| if (unlikely(pci_channel_offline(ha->pdev))) |
| return rval; |
| |
| ha->isp_ops->disable_intrs(ha); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Turn off master enable */ |
| cmd = 0; |
| pci_read_config_word(ha->pdev, PCI_COMMAND, &cmd); |
| cmd &= ~PCI_COMMAND_MASTER; |
| pci_write_config_word(ha->pdev, PCI_COMMAND, cmd); |
| |
| if (!IS_QLA2100(ha)) { |
| /* Pause RISC. */ |
| WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); |
| if (IS_QLA2200(ha) || IS_QLA2300(ha)) { |
| for (cnt = 0; cnt < 30000; cnt++) { |
| if ((RD_REG_WORD(®->hccr) & |
| HCCR_RISC_PAUSE) != 0) |
| break; |
| udelay(100); |
| } |
| } else { |
| RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| udelay(10); |
| } |
| |
| /* Select FPM registers. */ |
| WRT_REG_WORD(®->ctrl_status, 0x20); |
| RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ |
| |
| /* FPM Soft Reset. */ |
| WRT_REG_WORD(®->fpm_diag_config, 0x100); |
| RD_REG_WORD(®->fpm_diag_config); /* PCI Posting. */ |
| |
| /* Toggle Fpm Reset. */ |
| if (!IS_QLA2200(ha)) { |
| WRT_REG_WORD(®->fpm_diag_config, 0x0); |
| RD_REG_WORD(®->fpm_diag_config); /* PCI Posting. */ |
| } |
| |
| /* Select frame buffer registers. */ |
| WRT_REG_WORD(®->ctrl_status, 0x10); |
| RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ |
| |
| /* Reset frame buffer FIFOs. */ |
| if (IS_QLA2200(ha)) { |
| WRT_FB_CMD_REG(ha, reg, 0xa000); |
| RD_FB_CMD_REG(ha, reg); /* PCI Posting. */ |
| } else { |
| WRT_FB_CMD_REG(ha, reg, 0x00fc); |
| |
| /* Read back fb_cmd until zero or 3 seconds max */ |
| for (cnt = 0; cnt < 3000; cnt++) { |
| if ((RD_FB_CMD_REG(ha, reg) & 0xff) == 0) |
| break; |
| udelay(100); |
| } |
| } |
| |
| /* Select RISC module registers. */ |
| WRT_REG_WORD(®->ctrl_status, 0); |
| RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ |
| |
| /* Reset RISC processor. */ |
| WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); |
| RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| |
| /* Release RISC processor. */ |
| WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| } |
| |
| WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT); |
| WRT_REG_WORD(®->hccr, HCCR_CLR_HOST_INT); |
| |
| /* Reset ISP chip. */ |
| WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); |
| |
| /* Wait for RISC to recover from reset. */ |
| if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { |
| /* |
| * It is necessary to for a delay here since the card doesn't |
| * respond to PCI reads during a reset. On some architectures |
| * this will result in an MCA. |
| */ |
| udelay(20); |
| for (cnt = 30000; cnt; cnt--) { |
| if ((RD_REG_WORD(®->ctrl_status) & |
| CSR_ISP_SOFT_RESET) == 0) |
| break; |
| udelay(100); |
| } |
| } else |
| udelay(10); |
| |
| /* Reset RISC processor. */ |
| WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); |
| |
| WRT_REG_WORD(®->semaphore, 0); |
| |
| /* Release RISC processor. */ |
| WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| |
| if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { |
| for (cnt = 0; cnt < 30000; cnt++) { |
| if (RD_MAILBOX_REG(ha, reg, 0) != MBS_BUSY) |
| break; |
| |
| udelay(100); |
| } |
| } else |
| udelay(100); |
| |
| /* Turn on master enable */ |
| cmd |= PCI_COMMAND_MASTER; |
| pci_write_config_word(ha->pdev, PCI_COMMAND, cmd); |
| |
| /* Disable RISC pause on FPM parity error. */ |
| if (!IS_QLA2100(ha)) { |
| WRT_REG_WORD(®->hccr, HCCR_DISABLE_PARITY_PAUSE); |
| RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| } |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla81xx_reset_mpi() - Reset's MPI FW via Write MPI Register MBC. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| static int |
| qla81xx_reset_mpi(scsi_qla_host_t *vha) |
| { |
| uint16_t mb[4] = {0x1010, 0, 1, 0}; |
| |
| if (!IS_QLA81XX(vha->hw)) |
| return QLA_SUCCESS; |
| |
| return qla81xx_write_mpi_register(vha, mb); |
| } |
| |
| /** |
| * qla24xx_reset_risc() - Perform full reset of ISP24xx RISC. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| static inline int |
| qla24xx_reset_risc(scsi_qla_host_t *vha) |
| { |
| unsigned long flags = 0; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| uint32_t cnt; |
| uint16_t wd; |
| static int abts_cnt; /* ISP abort retry counts */ |
| int rval = QLA_SUCCESS; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Reset RISC. */ |
| WRT_REG_DWORD(®->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); |
| for (cnt = 0; cnt < 30000; cnt++) { |
| if ((RD_REG_DWORD(®->ctrl_status) & CSRX_DMA_ACTIVE) == 0) |
| break; |
| |
| udelay(10); |
| } |
| |
| if (!(RD_REG_DWORD(®->ctrl_status) & CSRX_DMA_ACTIVE)) |
| set_bit(DMA_SHUTDOWN_CMPL, &ha->fw_dump_cap_flags); |
| |
| ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017e, |
| "HCCR: 0x%x, Control Status %x, DMA active status:0x%x\n", |
| RD_REG_DWORD(®->hccr), |
| RD_REG_DWORD(®->ctrl_status), |
| (RD_REG_DWORD(®->ctrl_status) & CSRX_DMA_ACTIVE)); |
| |
| WRT_REG_DWORD(®->ctrl_status, |
| CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); |
| pci_read_config_word(ha->pdev, PCI_COMMAND, &wd); |
| |
| udelay(100); |
| |
| /* Wait for firmware to complete NVRAM accesses. */ |
| RD_REG_WORD(®->mailbox0); |
| for (cnt = 10000; RD_REG_WORD(®->mailbox0) != 0 && |
| rval == QLA_SUCCESS; cnt--) { |
| barrier(); |
| if (cnt) |
| udelay(5); |
| else |
| rval = QLA_FUNCTION_TIMEOUT; |
| } |
| |
| if (rval == QLA_SUCCESS) |
| set_bit(ISP_MBX_RDY, &ha->fw_dump_cap_flags); |
| |
| ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017f, |
| "HCCR: 0x%x, MailBox0 Status 0x%x\n", |
| RD_REG_DWORD(®->hccr), |
| RD_REG_DWORD(®->mailbox0)); |
| |
| /* Wait for soft-reset to complete. */ |
| RD_REG_DWORD(®->ctrl_status); |
| for (cnt = 0; cnt < 60; cnt++) { |
| barrier(); |
| if ((RD_REG_DWORD(®->ctrl_status) & |
| CSRX_ISP_SOFT_RESET) == 0) |
| break; |
| |
| udelay(5); |
| } |
| if (!(RD_REG_DWORD(®->ctrl_status) & CSRX_ISP_SOFT_RESET)) |
| set_bit(ISP_SOFT_RESET_CMPL, &ha->fw_dump_cap_flags); |
| |
| ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015d, |
| "HCCR: 0x%x, Soft Reset status: 0x%x\n", |
| RD_REG_DWORD(®->hccr), |
| RD_REG_DWORD(®->ctrl_status)); |
| |
| /* If required, do an MPI FW reset now */ |
| if (test_and_clear_bit(MPI_RESET_NEEDED, &vha->dpc_flags)) { |
| if (qla81xx_reset_mpi(vha) != QLA_SUCCESS) { |
| if (++abts_cnt < 5) { |
| set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); |
| set_bit(MPI_RESET_NEEDED, &vha->dpc_flags); |
| } else { |
| /* |
| * We exhausted the ISP abort retries. We have to |
| * set the board offline. |
| */ |
| abts_cnt = 0; |
| vha->flags.online = 0; |
| } |
| } |
| } |
| |
| WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET); |
| RD_REG_DWORD(®->hccr); |
| |
| WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); |
| RD_REG_DWORD(®->hccr); |
| |
| WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_RESET); |
| RD_REG_DWORD(®->hccr); |
| |
| RD_REG_WORD(®->mailbox0); |
| for (cnt = 60; RD_REG_WORD(®->mailbox0) != 0 && |
| rval == QLA_SUCCESS; cnt--) { |
| barrier(); |
| if (cnt) |
| udelay(5); |
| else |
| rval = QLA_FUNCTION_TIMEOUT; |
| } |
| if (rval == QLA_SUCCESS) |
| set_bit(RISC_RDY_AFT_RESET, &ha->fw_dump_cap_flags); |
| |
| ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015e, |
| "Host Risc 0x%x, mailbox0 0x%x\n", |
| RD_REG_DWORD(®->hccr), |
| RD_REG_WORD(®->mailbox0)); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015f, |
| "Driver in %s mode\n", |
| IS_NOPOLLING_TYPE(ha) ? "Interrupt" : "Polling"); |
| |
| if (IS_NOPOLLING_TYPE(ha)) |
| ha->isp_ops->enable_intrs(ha); |
| |
| return rval; |
| } |
| |
| static void |
| qla25xx_read_risc_sema_reg(scsi_qla_host_t *vha, uint32_t *data) |
| { |
| struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24; |
| |
| WRT_REG_DWORD(®->iobase_addr, RISC_REGISTER_BASE_OFFSET); |
| *data = RD_REG_DWORD(®->iobase_window + RISC_REGISTER_WINDOW_OFFET); |
| |
| } |
| |
| static void |
| qla25xx_write_risc_sema_reg(scsi_qla_host_t *vha, uint32_t data) |
| { |
| struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24; |
| |
| WRT_REG_DWORD(®->iobase_addr, RISC_REGISTER_BASE_OFFSET); |
| WRT_REG_DWORD(®->iobase_window + RISC_REGISTER_WINDOW_OFFET, data); |
| } |
| |
| static void |
| qla25xx_manipulate_risc_semaphore(scsi_qla_host_t *vha) |
| { |
| uint32_t wd32 = 0; |
| uint delta_msec = 100; |
| uint elapsed_msec = 0; |
| uint timeout_msec; |
| ulong n; |
| |
| if (vha->hw->pdev->subsystem_device != 0x0175 && |
| vha->hw->pdev->subsystem_device != 0x0240) |
| return; |
| |
| WRT_REG_DWORD(&vha->hw->iobase->isp24.hccr, HCCRX_SET_RISC_PAUSE); |
| udelay(100); |
| |
| attempt: |
| timeout_msec = TIMEOUT_SEMAPHORE; |
| n = timeout_msec / delta_msec; |
| while (n--) { |
| qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_SET); |
| qla25xx_read_risc_sema_reg(vha, &wd32); |
| if (wd32 & RISC_SEMAPHORE) |
| break; |
| msleep(delta_msec); |
| elapsed_msec += delta_msec; |
| if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED) |
| goto force; |
| } |
| |
| if (!(wd32 & RISC_SEMAPHORE)) |
| goto force; |
| |
| if (!(wd32 & RISC_SEMAPHORE_FORCE)) |
| goto acquired; |
| |
| qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_CLR); |
| timeout_msec = TIMEOUT_SEMAPHORE_FORCE; |
| n = timeout_msec / delta_msec; |
| while (n--) { |
| qla25xx_read_risc_sema_reg(vha, &wd32); |
| if (!(wd32 & RISC_SEMAPHORE_FORCE)) |
| break; |
| msleep(delta_msec); |
| elapsed_msec += delta_msec; |
| if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED) |
| goto force; |
| } |
| |
| if (wd32 & RISC_SEMAPHORE_FORCE) |
| qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_CLR); |
| |
| goto attempt; |
| |
| force: |
| qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_SET); |
| |
| acquired: |
| return; |
| } |
| |
| /** |
| * qla24xx_reset_chip() - Reset ISP24xx chip. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla24xx_reset_chip(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| int rval = QLA_FUNCTION_FAILED; |
| |
| if (pci_channel_offline(ha->pdev) && |
| ha->flags.pci_channel_io_perm_failure) { |
| return rval; |
| } |
| |
| ha->isp_ops->disable_intrs(ha); |
| |
| qla25xx_manipulate_risc_semaphore(vha); |
| |
| /* Perform RISC reset. */ |
| rval = qla24xx_reset_risc(vha); |
| |
| return rval; |
| } |
| |
| /** |
| * qla2x00_chip_diag() - Test chip for proper operation. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla2x00_chip_diag(scsi_qla_host_t *vha) |
| { |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| unsigned long flags = 0; |
| uint16_t data; |
| uint32_t cnt; |
| uint16_t mb[5]; |
| struct req_que *req = ha->req_q_map[0]; |
| |
| /* Assume a failed state */ |
| rval = QLA_FUNCTION_FAILED; |
| |
| ql_dbg(ql_dbg_init, vha, 0x007b, "Testing device at %p.\n", |
| ®->flash_address); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Reset ISP chip. */ |
| WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); |
| |
| /* |
| * We need to have a delay here since the card will not respond while |
| * in reset causing an MCA on some architectures. |
| */ |
| udelay(20); |
| data = qla2x00_debounce_register(®->ctrl_status); |
| for (cnt = 6000000 ; cnt && (data & CSR_ISP_SOFT_RESET); cnt--) { |
| udelay(5); |
| data = RD_REG_WORD(®->ctrl_status); |
| barrier(); |
| } |
| |
| if (!cnt) |
| goto chip_diag_failed; |
| |
| ql_dbg(ql_dbg_init, vha, 0x007c, |
| "Reset register cleared by chip reset.\n"); |
| |
| /* Reset RISC processor. */ |
| WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); |
| WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| |
| /* Workaround for QLA2312 PCI parity error */ |
| if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { |
| data = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 0)); |
| for (cnt = 6000000; cnt && (data == MBS_BUSY); cnt--) { |
| udelay(5); |
| data = RD_MAILBOX_REG(ha, reg, 0); |
| barrier(); |
| } |
| } else |
| udelay(10); |
| |
| if (!cnt) |
| goto chip_diag_failed; |
| |
| /* Check product ID of chip */ |
| ql_dbg(ql_dbg_init, vha, 0x007d, "Checking product ID of chip.\n"); |
| |
| mb[1] = RD_MAILBOX_REG(ha, reg, 1); |
| mb[2] = RD_MAILBOX_REG(ha, reg, 2); |
| mb[3] = RD_MAILBOX_REG(ha, reg, 3); |
| mb[4] = qla2x00_debounce_register(MAILBOX_REG(ha, reg, 4)); |
| if (mb[1] != PROD_ID_1 || (mb[2] != PROD_ID_2 && mb[2] != PROD_ID_2a) || |
| mb[3] != PROD_ID_3) { |
| ql_log(ql_log_warn, vha, 0x0062, |
| "Wrong product ID = 0x%x,0x%x,0x%x.\n", |
| mb[1], mb[2], mb[3]); |
| |
| goto chip_diag_failed; |
| } |
| ha->product_id[0] = mb[1]; |
| ha->product_id[1] = mb[2]; |
| ha->product_id[2] = mb[3]; |
| ha->product_id[3] = mb[4]; |
| |
| /* Adjust fw RISC transfer size */ |
| if (req->length > 1024) |
| ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024; |
| else |
| ha->fw_transfer_size = REQUEST_ENTRY_SIZE * |
| req->length; |
| |
| if (IS_QLA2200(ha) && |
| RD_MAILBOX_REG(ha, reg, 7) == QLA2200A_RISC_ROM_VER) { |
| /* Limit firmware transfer size with a 2200A */ |
| ql_dbg(ql_dbg_init, vha, 0x007e, "Found QLA2200A Chip.\n"); |
| |
| ha->device_type |= DT_ISP2200A; |
| ha->fw_transfer_size = 128; |
| } |
| |
| /* Wrap Incoming Mailboxes Test. */ |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| ql_dbg(ql_dbg_init, vha, 0x007f, "Checking mailboxes.\n"); |
| rval = qla2x00_mbx_reg_test(vha); |
| if (rval) |
| ql_log(ql_log_warn, vha, 0x0080, |
| "Failed mailbox send register test.\n"); |
| else |
| /* Flag a successful rval */ |
| rval = QLA_SUCCESS; |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| chip_diag_failed: |
| if (rval) |
| ql_log(ql_log_info, vha, 0x0081, |
| "Chip diagnostics **** FAILED ****.\n"); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return (rval); |
| } |
| |
| /** |
| * qla24xx_chip_diag() - Test ISP24xx for proper operation. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla24xx_chip_diag(scsi_qla_host_t *vha) |
| { |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| |
| if (IS_P3P_TYPE(ha)) |
| return QLA_SUCCESS; |
| |
| ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length; |
| |
| rval = qla2x00_mbx_reg_test(vha); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x0082, |
| "Failed mailbox send register test.\n"); |
| } else { |
| /* Flag a successful rval */ |
| rval = QLA_SUCCESS; |
| } |
| |
| return rval; |
| } |
| |
| static void |
| qla2x00_alloc_offload_mem(scsi_qla_host_t *vha) |
| { |
| int rval; |
| dma_addr_t tc_dma; |
| void *tc; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (ha->eft) { |
| ql_dbg(ql_dbg_init, vha, 0x00bd, |
| "%s: Offload Mem is already allocated.\n", |
| __func__); |
| return; |
| } |
| |
| if (IS_FWI2_CAPABLE(ha)) { |
| /* Allocate memory for Fibre Channel Event Buffer. */ |
| if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) && |
| !IS_QLA27XX(ha) && !IS_QLA28XX(ha)) |
| goto try_eft; |
| |
| if (ha->fce) |
| dma_free_coherent(&ha->pdev->dev, |
| FCE_SIZE, ha->fce, ha->fce_dma); |
| |
| /* Allocate memory for Fibre Channel Event Buffer. */ |
| tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma, |
| GFP_KERNEL); |
| if (!tc) { |
| ql_log(ql_log_warn, vha, 0x00be, |
| "Unable to allocate (%d KB) for FCE.\n", |
| FCE_SIZE / 1024); |
| goto try_eft; |
| } |
| |
| rval = qla2x00_enable_fce_trace(vha, tc_dma, FCE_NUM_BUFFERS, |
| ha->fce_mb, &ha->fce_bufs); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x00bf, |
| "Unable to initialize FCE (%d).\n", rval); |
| dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc, |
| tc_dma); |
| ha->flags.fce_enabled = 0; |
| goto try_eft; |
| } |
| ql_dbg(ql_dbg_init, vha, 0x00c0, |
| "Allocate (%d KB) for FCE...\n", FCE_SIZE / 1024); |
| |
| ha->flags.fce_enabled = 1; |
| ha->fce_dma = tc_dma; |
| ha->fce = tc; |
| |
| try_eft: |
| if (ha->eft) |
| dma_free_coherent(&ha->pdev->dev, |
| EFT_SIZE, ha->eft, ha->eft_dma); |
| |
| /* Allocate memory for Extended Trace Buffer. */ |
| tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma, |
| GFP_KERNEL); |
| if (!tc) { |
| ql_log(ql_log_warn, vha, 0x00c1, |
| "Unable to allocate (%d KB) for EFT.\n", |
| EFT_SIZE / 1024); |
| goto eft_err; |
| } |
| |
| rval = qla2x00_enable_eft_trace(vha, tc_dma, EFT_NUM_BUFFERS); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x00c2, |
| "Unable to initialize EFT (%d).\n", rval); |
| dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc, |
| tc_dma); |
| goto eft_err; |
| } |
| ql_dbg(ql_dbg_init, vha, 0x00c3, |
| "Allocated (%d KB) EFT ...\n", EFT_SIZE / 1024); |
| |
| ha->eft_dma = tc_dma; |
| ha->eft = tc; |
| } |
| |
| eft_err: |
| return; |
| } |
| |
| void |
| qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size, |
| eft_size, fce_size, mq_size; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| struct rsp_que *rsp = ha->rsp_q_map[0]; |
| struct qla2xxx_fw_dump *fw_dump; |
| dma_addr_t tc_dma; |
| void *tc; |
| |
| dump_size = fixed_size = mem_size = eft_size = fce_size = mq_size = 0; |
| req_q_size = rsp_q_size = 0; |
| |
| if (IS_QLA2100(ha) || IS_QLA2200(ha)) { |
| fixed_size = sizeof(struct qla2100_fw_dump); |
| } else if (IS_QLA23XX(ha)) { |
| fixed_size = offsetof(struct qla2300_fw_dump, data_ram); |
| mem_size = (ha->fw_memory_size - 0x11000 + 1) * |
| sizeof(uint16_t); |
| } else if (IS_FWI2_CAPABLE(ha)) { |
| if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) |
| fixed_size = offsetof(struct qla83xx_fw_dump, ext_mem); |
| else if (IS_QLA81XX(ha)) |
| fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem); |
| else if (IS_QLA25XX(ha)) |
| fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem); |
| else |
| fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem); |
| |
| mem_size = (ha->fw_memory_size - 0x100000 + 1) * |
| sizeof(uint32_t); |
| if (ha->mqenable) { |
| if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha) && |
| !IS_QLA28XX(ha)) |
| mq_size = sizeof(struct qla2xxx_mq_chain); |
| /* |
| * Allocate maximum buffer size for all queues - Q0. |
| * Resizing must be done at end-of-dump processing. |
| */ |
| mq_size += (ha->max_req_queues - 1) * |
| (req->length * sizeof(request_t)); |
| mq_size += (ha->max_rsp_queues - 1) * |
| (rsp->length * sizeof(response_t)); |
| } |
| if (ha->tgt.atio_ring) |
| mq_size += ha->tgt.atio_q_length * sizeof(request_t); |
| /* Allocate memory for Fibre Channel Event Buffer. */ |
| if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) && |
| !IS_QLA27XX(ha) && !IS_QLA28XX(ha)) |
| goto try_eft; |
| |
| fce_size = sizeof(struct qla2xxx_fce_chain) + FCE_SIZE; |
| try_eft: |
| if (ha->eft) |
| dma_free_coherent(&ha->pdev->dev, |
| EFT_SIZE, ha->eft, ha->eft_dma); |
| |
| /* Allocate memory for Extended Trace Buffer. */ |
| tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma, |
| GFP_KERNEL); |
| if (!tc) { |
| ql_log(ql_log_warn, vha, 0x00c1, |
| "Unable to allocate (%d KB) for EFT.\n", |
| EFT_SIZE / 1024); |
| goto allocate; |
| } |
| |
| rval = qla2x00_enable_eft_trace(vha, tc_dma, EFT_NUM_BUFFERS); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x00c2, |
| "Unable to initialize EFT (%d).\n", rval); |
| dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc, |
| tc_dma); |
| } |
| ql_dbg(ql_dbg_init, vha, 0x00c3, |
| "Allocated (%d KB) EFT ...\n", EFT_SIZE / 1024); |
| eft_size = EFT_SIZE; |
| } |
| |
| if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) { |
| struct fwdt *fwdt = ha->fwdt; |
| uint j; |
| |
| for (j = 0; j < 2; j++, fwdt++) { |
| if (!fwdt->template) { |
| ql_log(ql_log_warn, vha, 0x00ba, |
| "-> fwdt%u no template\n", j); |
| continue; |
| } |
| ql_dbg(ql_dbg_init, vha, 0x00fa, |
| "-> fwdt%u calculating fwdump size...\n", j); |
| fwdt->dump_size = qla27xx_fwdt_calculate_dump_size( |
| vha, fwdt->template); |
| ql_dbg(ql_dbg_init, vha, 0x00fa, |
| "-> fwdt%u calculated fwdump size = %#lx bytes\n", |
| j, fwdt->dump_size); |
| dump_size += fwdt->dump_size; |
| } |
| goto allocate; |
| } |
| |
| req_q_size = req->length * sizeof(request_t); |
| rsp_q_size = rsp->length * sizeof(response_t); |
| dump_size = offsetof(struct qla2xxx_fw_dump, isp); |
| dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + eft_size; |
| ha->chain_offset = dump_size; |
| dump_size += mq_size + fce_size; |
| |
| if (ha->exchoffld_buf) |
| dump_size += sizeof(struct qla2xxx_offld_chain) + |
| ha->exchoffld_size; |
| if (ha->exlogin_buf) |
| dump_size += sizeof(struct qla2xxx_offld_chain) + |
| ha->exlogin_size; |
| |
| allocate: |
| if (!ha->fw_dump_len || dump_size > ha->fw_dump_alloc_len) { |
| |
| ql_dbg(ql_dbg_init, vha, 0x00c5, |
| "%s dump_size %d fw_dump_len %d fw_dump_alloc_len %d\n", |
| __func__, dump_size, ha->fw_dump_len, |
| ha->fw_dump_alloc_len); |
| |
| fw_dump = vmalloc(dump_size); |
| if (!fw_dump) { |
| ql_log(ql_log_warn, vha, 0x00c4, |
| "Unable to allocate (%d KB) for firmware dump.\n", |
| dump_size / 1024); |
| } else { |
| mutex_lock(&ha->optrom_mutex); |
| if (ha->fw_dumped) { |
| memcpy(fw_dump, ha->fw_dump, ha->fw_dump_len); |
| vfree(ha->fw_dump); |
| ha->fw_dump = fw_dump; |
| ha->fw_dump_alloc_len = dump_size; |
| ql_dbg(ql_dbg_init, vha, 0x00c5, |
| "Re-Allocated (%d KB) and save firmware dump.\n", |
| dump_size / 1024); |
| } else { |
| if (ha->fw_dump) |
| vfree(ha->fw_dump); |
| ha->fw_dump = fw_dump; |
| |
| ha->fw_dump_len = ha->fw_dump_alloc_len = |
| dump_size; |
| ql_dbg(ql_dbg_init, vha, 0x00c5, |
| "Allocated (%d KB) for firmware dump.\n", |
| dump_size / 1024); |
| |
| if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) { |
| mutex_unlock(&ha->optrom_mutex); |
| return; |
| } |
| |
| ha->fw_dump->signature[0] = 'Q'; |
| ha->fw_dump->signature[1] = 'L'; |
| ha->fw_dump->signature[2] = 'G'; |
| ha->fw_dump->signature[3] = 'C'; |
| ha->fw_dump->version = htonl(1); |
| |
| ha->fw_dump->fixed_size = htonl(fixed_size); |
| ha->fw_dump->mem_size = htonl(mem_size); |
| ha->fw_dump->req_q_size = htonl(req_q_size); |
| ha->fw_dump->rsp_q_size = htonl(rsp_q_size); |
| |
| ha->fw_dump->eft_size = htonl(eft_size); |
| ha->fw_dump->eft_addr_l = |
| htonl(LSD(ha->eft_dma)); |
| ha->fw_dump->eft_addr_h = |
| htonl(MSD(ha->eft_dma)); |
| |
| ha->fw_dump->header_size = |
| htonl(offsetof |
| (struct qla2xxx_fw_dump, isp)); |
| } |
| mutex_unlock(&ha->optrom_mutex); |
| } |
| } |
| } |
| |
| static int |
| qla81xx_mpi_sync(scsi_qla_host_t *vha) |
| { |
| #define MPS_MASK 0xe0 |
| int rval; |
| uint16_t dc; |
| uint32_t dw; |
| |
| if (!IS_QLA81XX(vha->hw)) |
| return QLA_SUCCESS; |
| |
| rval = qla2x00_write_ram_word(vha, 0x7c00, 1); |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x0105, |
| "Unable to acquire semaphore.\n"); |
| goto done; |
| } |
| |
| pci_read_config_word(vha->hw->pdev, 0x54, &dc); |
| rval = qla2x00_read_ram_word(vha, 0x7a15, &dw); |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x0067, "Unable to read sync.\n"); |
| goto done_release; |
| } |
| |
| dc &= MPS_MASK; |
| if (dc == (dw & MPS_MASK)) |
| goto done_release; |
| |
| dw &= ~MPS_MASK; |
| dw |= dc; |
| rval = qla2x00_write_ram_word(vha, 0x7a15, dw); |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x0114, "Unable to gain sync.\n"); |
| } |
| |
| done_release: |
| rval = qla2x00_write_ram_word(vha, 0x7c00, 0); |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x006d, |
| "Unable to release semaphore.\n"); |
| } |
| |
| done: |
| return rval; |
| } |
| |
| int |
| qla2x00_alloc_outstanding_cmds(struct qla_hw_data *ha, struct req_que *req) |
| { |
| /* Don't try to reallocate the array */ |
| if (req->outstanding_cmds) |
| return QLA_SUCCESS; |
| |
| if (!IS_FWI2_CAPABLE(ha)) |
| req->num_outstanding_cmds = DEFAULT_OUTSTANDING_COMMANDS; |
| else { |
| if (ha->cur_fw_xcb_count <= ha->cur_fw_iocb_count) |
| req->num_outstanding_cmds = ha->cur_fw_xcb_count; |
| else |
| req->num_outstanding_cmds = ha->cur_fw_iocb_count; |
| } |
| |
| req->outstanding_cmds = kcalloc(req->num_outstanding_cmds, |
| sizeof(srb_t *), |
| GFP_KERNEL); |
| |
| if (!req->outstanding_cmds) { |
| /* |
| * Try to allocate a minimal size just so we can get through |
| * initialization. |
| */ |
| req->num_outstanding_cmds = MIN_OUTSTANDING_COMMANDS; |
| req->outstanding_cmds = kcalloc(req->num_outstanding_cmds, |
| sizeof(srb_t *), |
| GFP_KERNEL); |
| |
| if (!req->outstanding_cmds) { |
| ql_log(ql_log_fatal, NULL, 0x0126, |
| "Failed to allocate memory for " |
| "outstanding_cmds for req_que %p.\n", req); |
| req->num_outstanding_cmds = 0; |
| return QLA_FUNCTION_FAILED; |
| } |
| } |
| |
| return QLA_SUCCESS; |
| } |
| |
| #define PRINT_FIELD(_field, _flag, _str) { \ |
| if (a0->_field & _flag) {\ |
| if (p) {\ |
| strcat(ptr, "|");\ |
| ptr++;\ |
| leftover--;\ |
| } \ |
| len = snprintf(ptr, leftover, "%s", _str); \ |
| p = 1;\ |
| leftover -= len;\ |
| ptr += len; \ |
| } \ |
| } |
| |
| static void qla2xxx_print_sfp_info(struct scsi_qla_host *vha) |
| { |
| #define STR_LEN 64 |
| struct sff_8247_a0 *a0 = (struct sff_8247_a0 *)vha->hw->sfp_data; |
| u8 str[STR_LEN], *ptr, p; |
| int leftover, len; |
| |
| memset(str, 0, STR_LEN); |
| snprintf(str, SFF_VEN_NAME_LEN+1, a0->vendor_name); |
| ql_dbg(ql_dbg_init, vha, 0x015a, |
| "SFP MFG Name: %s\n", str); |
| |
| memset(str, 0, STR_LEN); |
| snprintf(str, SFF_PART_NAME_LEN+1, a0->vendor_pn); |
| ql_dbg(ql_dbg_init, vha, 0x015c, |
| "SFP Part Name: %s\n", str); |
| |
| /* media */ |
| memset(str, 0, STR_LEN); |
| ptr = str; |
| leftover = STR_LEN; |
| p = len = 0; |
| PRINT_FIELD(fc_med_cc9, FC_MED_TW, "Twin AX"); |
| PRINT_FIELD(fc_med_cc9, FC_MED_TP, "Twisted Pair"); |
| PRINT_FIELD(fc_med_cc9, FC_MED_MI, "Min Coax"); |
| PRINT_FIELD(fc_med_cc9, FC_MED_TV, "Video Coax"); |
| PRINT_FIELD(fc_med_cc9, FC_MED_M6, "MultiMode 62.5um"); |
| PRINT_FIELD(fc_med_cc9, FC_MED_M5, "MultiMode 50um"); |
| PRINT_FIELD(fc_med_cc9, FC_MED_SM, "SingleMode"); |
| ql_dbg(ql_dbg_init, vha, 0x0160, |
| "SFP Media: %s\n", str); |
| |
| /* link length */ |
| memset(str, 0, STR_LEN); |
| ptr = str; |
| leftover = STR_LEN; |
| p = len = 0; |
| PRINT_FIELD(fc_ll_cc7, FC_LL_VL, "Very Long"); |
| PRINT_FIELD(fc_ll_cc7, FC_LL_S, "Short"); |
| PRINT_FIELD(fc_ll_cc7, FC_LL_I, "Intermediate"); |
| PRINT_FIELD(fc_ll_cc7, FC_LL_L, "Long"); |
| PRINT_FIELD(fc_ll_cc7, FC_LL_M, "Medium"); |
| ql_dbg(ql_dbg_init, vha, 0x0196, |
| "SFP Link Length: %s\n", str); |
| |
| memset(str, 0, STR_LEN); |
| ptr = str; |
| leftover = STR_LEN; |
| p = len = 0; |
| PRINT_FIELD(fc_ll_cc7, FC_LL_SA, "Short Wave (SA)"); |
| PRINT_FIELD(fc_ll_cc7, FC_LL_LC, "Long Wave(LC)"); |
| PRINT_FIELD(fc_tec_cc8, FC_TEC_SN, "Short Wave (SN)"); |
| PRINT_FIELD(fc_tec_cc8, FC_TEC_SL, "Short Wave (SL)"); |
| PRINT_FIELD(fc_tec_cc8, FC_TEC_LL, "Long Wave (LL)"); |
| ql_dbg(ql_dbg_init, vha, 0x016e, |
| "SFP FC Link Tech: %s\n", str); |
| |
| if (a0->length_km) |
| ql_dbg(ql_dbg_init, vha, 0x016f, |
| "SFP Distant: %d km\n", a0->length_km); |
| if (a0->length_100m) |
| ql_dbg(ql_dbg_init, vha, 0x0170, |
| "SFP Distant: %d m\n", a0->length_100m*100); |
| if (a0->length_50um_10m) |
| ql_dbg(ql_dbg_init, vha, 0x0189, |
| "SFP Distant (WL=50um): %d m\n", a0->length_50um_10m * 10); |
| if (a0->length_62um_10m) |
| ql_dbg(ql_dbg_init, vha, 0x018a, |
| "SFP Distant (WL=62.5um): %d m\n", a0->length_62um_10m * 10); |
| if (a0->length_om4_10m) |
| ql_dbg(ql_dbg_init, vha, 0x0194, |
| "SFP Distant (OM4): %d m\n", a0->length_om4_10m * 10); |
| if (a0->length_om3_10m) |
| ql_dbg(ql_dbg_init, vha, 0x0195, |
| "SFP Distant (OM3): %d m\n", a0->length_om3_10m * 10); |
| } |
| |
| |
| /* |
| * Return Code: |
| * QLA_SUCCESS: no action |
| * QLA_INTERFACE_ERROR: SFP is not there. |
| * QLA_FUNCTION_FAILED: detected New SFP |
| */ |
| int |
| qla24xx_detect_sfp(scsi_qla_host_t *vha) |
| { |
| int rc = QLA_SUCCESS; |
| struct sff_8247_a0 *a; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (!AUTO_DETECT_SFP_SUPPORT(vha)) |
| goto out; |
| |
| rc = qla2x00_read_sfp_dev(vha, NULL, 0); |
| if (rc) |
| goto out; |
| |
| a = (struct sff_8247_a0 *)vha->hw->sfp_data; |
| qla2xxx_print_sfp_info(vha); |
| |
| if (a->fc_ll_cc7 & FC_LL_VL || a->fc_ll_cc7 & FC_LL_L) { |
| /* long range */ |
| ha->flags.detected_lr_sfp = 1; |
| |
| if (a->length_km > 5 || a->length_100m > 50) |
| ha->long_range_distance = LR_DISTANCE_10K; |
| else |
| ha->long_range_distance = LR_DISTANCE_5K; |
| |
| if (ha->flags.detected_lr_sfp != ha->flags.using_lr_setting) |
| ql_dbg(ql_dbg_async, vha, 0x507b, |
| "Detected Long Range SFP.\n"); |
| } else { |
| /* short range */ |
| ha->flags.detected_lr_sfp = 0; |
| if (ha->flags.using_lr_setting) |
| ql_dbg(ql_dbg_async, vha, 0x5084, |
| "Detected Short Range SFP.\n"); |
| } |
| |
| if (!vha->flags.init_done) |
| rc = QLA_SUCCESS; |
| out: |
| return rc; |
| } |
| |
| /** |
| * qla2x00_setup_chip() - Load and start RISC firmware. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| static int |
| qla2x00_setup_chip(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint32_t srisc_address = 0; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| unsigned long flags; |
| uint16_t fw_major_version; |
| |
| if (IS_P3P_TYPE(ha)) { |
| rval = ha->isp_ops->load_risc(vha, &srisc_address); |
| if (rval == QLA_SUCCESS) { |
| qla2x00_stop_firmware(vha); |
| goto enable_82xx_npiv; |
| } else |
| goto failed; |
| } |
| |
| if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) { |
| /* Disable SRAM, Instruction RAM and GP RAM parity. */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x0)); |
| RD_REG_WORD(®->hccr); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| } |
| |
| qla81xx_mpi_sync(vha); |
| |
| /* Load firmware sequences */ |
| rval = ha->isp_ops->load_risc(vha, &srisc_address); |
| if (rval == QLA_SUCCESS) { |
| ql_dbg(ql_dbg_init, vha, 0x00c9, |
| "Verifying Checksum of loaded RISC code.\n"); |
| |
| rval = qla2x00_verify_checksum(vha, srisc_address); |
| if (rval == QLA_SUCCESS) { |
| /* Start firmware execution. */ |
| ql_dbg(ql_dbg_init, vha, 0x00ca, |
| "Starting firmware.\n"); |
| |
| if (ql2xexlogins) |
| ha->flags.exlogins_enabled = 1; |
| |
| if (qla_is_exch_offld_enabled(vha)) |
| ha->flags.exchoffld_enabled = 1; |
| |
| rval = qla2x00_execute_fw(vha, srisc_address); |
| /* Retrieve firmware information. */ |
| if (rval == QLA_SUCCESS) { |
| qla24xx_detect_sfp(vha); |
| |
| if ((IS_QLA83XX(ha) || IS_QLA27XX(ha) || |
| IS_QLA28XX(ha)) && |
| (ha->zio_mode == QLA_ZIO_MODE_6)) |
| qla27xx_set_zio_threshold(vha, |
| ha->last_zio_threshold); |
| |
| rval = qla2x00_set_exlogins_buffer(vha); |
| if (rval != QLA_SUCCESS) |
| goto failed; |
| |
| rval = qla2x00_set_exchoffld_buffer(vha); |
| if (rval != QLA_SUCCESS) |
| goto failed; |
| |
| enable_82xx_npiv: |
| fw_major_version = ha->fw_major_version; |
| if (IS_P3P_TYPE(ha)) |
| qla82xx_check_md_needed(vha); |
| else |
| rval = qla2x00_get_fw_version(vha); |
| if (rval != QLA_SUCCESS) |
| goto failed; |
| ha->flags.npiv_supported = 0; |
| if (IS_QLA2XXX_MIDTYPE(ha) && |
| (ha->fw_attributes & BIT_2)) { |
| ha->flags.npiv_supported = 1; |
| if ((!ha->max_npiv_vports) || |
| ((ha->max_npiv_vports + 1) % |
| MIN_MULTI_ID_FABRIC)) |
| ha->max_npiv_vports = |
| MIN_MULTI_ID_FABRIC - 1; |
| } |
| qla2x00_get_resource_cnts(vha); |
| |
| /* |
| * Allocate the array of outstanding commands |
| * now that we know the firmware resources. |
| */ |
| rval = qla2x00_alloc_outstanding_cmds(ha, |
| vha->req); |
| if (rval != QLA_SUCCESS) |
| goto failed; |
| |
| if (!fw_major_version && !(IS_P3P_TYPE(ha))) |
| qla2x00_alloc_offload_mem(vha); |
| |
| if (ql2xallocfwdump && !(IS_P3P_TYPE(ha))) |
| qla2x00_alloc_fw_dump(vha); |
| |
| } else { |
| goto failed; |
| } |
| } else { |
| ql_log(ql_log_fatal, vha, 0x00cd, |
| "ISP Firmware failed checksum.\n"); |
| goto failed; |
| } |
| } else |
| goto failed; |
| |
| if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) { |
| /* Enable proper parity. */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| if (IS_QLA2300(ha)) |
| /* SRAM parity */ |
| WRT_REG_WORD(®->hccr, HCCR_ENABLE_PARITY + 0x1); |
| else |
| /* SRAM, Instruction RAM and GP RAM parity */ |
| WRT_REG_WORD(®->hccr, HCCR_ENABLE_PARITY + 0x7); |
| RD_REG_WORD(®->hccr); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| } |
| |
| if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) |
| ha->flags.fac_supported = 1; |
| else if (rval == QLA_SUCCESS && IS_FAC_REQUIRED(ha)) { |
| uint32_t size; |
| |
| rval = qla81xx_fac_get_sector_size(vha, &size); |
| if (rval == QLA_SUCCESS) { |
| ha->flags.fac_supported = 1; |
| ha->fdt_block_size = size << 2; |
| } else { |
| ql_log(ql_log_warn, vha, 0x00ce, |
| "Unsupported FAC firmware (%d.%02d.%02d).\n", |
| ha->fw_major_version, ha->fw_minor_version, |
| ha->fw_subminor_version); |
| |
| if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || |
| IS_QLA28XX(ha)) { |
| ha->flags.fac_supported = 0; |
| rval = QLA_SUCCESS; |
| } |
| } |
| } |
| failed: |
| if (rval) { |
| ql_log(ql_log_fatal, vha, 0x00cf, |
| "Setup chip ****FAILED****.\n"); |
| } |
| |
| return (rval); |
| } |
| |
| /** |
| * qla2x00_init_response_q_entries() - Initializes response queue entries. |
| * @rsp: response queue |
| * |
| * Beginning of request ring has initialization control block already built |
| * by nvram config routine. |
| * |
| * Returns 0 on success. |
| */ |
| void |
| qla2x00_init_response_q_entries(struct rsp_que *rsp) |
| { |
| uint16_t cnt; |
| response_t *pkt; |
| |
| rsp->ring_ptr = rsp->ring; |
| rsp->ring_index = 0; |
| rsp->status_srb = NULL; |
| pkt = rsp->ring_ptr; |
| for (cnt = 0; cnt < rsp->length; cnt++) { |
| pkt->signature = RESPONSE_PROCESSED; |
| pkt++; |
| } |
| } |
| |
| /** |
| * qla2x00_update_fw_options() - Read and process firmware options. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| void |
| qla2x00_update_fw_options(scsi_qla_host_t *vha) |
| { |
| uint16_t swing, emphasis, tx_sens, rx_sens; |
| struct qla_hw_data *ha = vha->hw; |
| |
| memset(ha->fw_options, 0, sizeof(ha->fw_options)); |
| qla2x00_get_fw_options(vha, ha->fw_options); |
| |
| if (IS_QLA2100(ha) || IS_QLA2200(ha)) |
| return; |
| |
| /* Serial Link options. */ |
| ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0115, |
| "Serial link options.\n"); |
| ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0109, |
| ha->fw_seriallink_options, sizeof(ha->fw_seriallink_options)); |
| |
| ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; |
| if (ha->fw_seriallink_options[3] & BIT_2) { |
| ha->fw_options[1] |= FO1_SET_EMPHASIS_SWING; |
| |
| /* 1G settings */ |
| swing = ha->fw_seriallink_options[2] & (BIT_2 | BIT_1 | BIT_0); |
| emphasis = (ha->fw_seriallink_options[2] & |
| (BIT_4 | BIT_3)) >> 3; |
| tx_sens = ha->fw_seriallink_options[0] & |
| (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| rx_sens = (ha->fw_seriallink_options[0] & |
| (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4; |
| ha->fw_options[10] = (emphasis << 14) | (swing << 8); |
| if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) { |
| if (rx_sens == 0x0) |
| rx_sens = 0x3; |
| ha->fw_options[10] |= (tx_sens << 4) | rx_sens; |
| } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) |
| ha->fw_options[10] |= BIT_5 | |
| ((rx_sens & (BIT_1 | BIT_0)) << 2) | |
| (tx_sens & (BIT_1 | BIT_0)); |
| |
| /* 2G settings */ |
| swing = (ha->fw_seriallink_options[2] & |
| (BIT_7 | BIT_6 | BIT_5)) >> 5; |
| emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0); |
| tx_sens = ha->fw_seriallink_options[1] & |
| (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| rx_sens = (ha->fw_seriallink_options[1] & |
| (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4; |
| ha->fw_options[11] = (emphasis << 14) | (swing << 8); |
| if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) { |
| if (rx_sens == 0x0) |
| rx_sens = 0x3; |
| ha->fw_options[11] |= (tx_sens << 4) | rx_sens; |
| } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) |
| ha->fw_options[11] |= BIT_5 | |
| ((rx_sens & (BIT_1 | BIT_0)) << 2) | |
| (tx_sens & (BIT_1 | BIT_0)); |
| } |
| |
| /* FCP2 options. */ |
| /* Return command IOCBs without waiting for an ABTS to complete. */ |
| ha->fw_options[3] |= BIT_13; |
| |
| /* LED scheme. */ |
| if (ha->flags.enable_led_scheme) |
| ha->fw_options[2] |= BIT_12; |
| |
| /* Detect ISP6312. */ |
| if (IS_QLA6312(ha)) |
| ha->fw_options[2] |= BIT_13; |
| |
| /* Set Retry FLOGI in case of P2P connection */ |
| if (ha->operating_mode == P2P) { |
| ha->fw_options[2] |= BIT_3; |
| ql_dbg(ql_dbg_disc, vha, 0x2100, |
| "(%s): Setting FLOGI retry BIT in fw_options[2]: 0x%x\n", |
| __func__, ha->fw_options[2]); |
| } |
| |
| /* Update firmware options. */ |
| qla2x00_set_fw_options(vha, ha->fw_options); |
| } |
| |
| void |
| qla24xx_update_fw_options(scsi_qla_host_t *vha) |
| { |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (IS_P3P_TYPE(ha)) |
| return; |
| |
| /* Hold status IOCBs until ABTS response received. */ |
| if (ql2xfwholdabts) |
| ha->fw_options[3] |= BIT_12; |
| |
| /* Set Retry FLOGI in case of P2P connection */ |
| if (ha->operating_mode == P2P) { |
| ha->fw_options[2] |= BIT_3; |
| ql_dbg(ql_dbg_disc, vha, 0x2101, |
| "(%s): Setting FLOGI retry BIT in fw_options[2]: 0x%x\n", |
| __func__, ha->fw_options[2]); |
| } |
| |
| /* Move PUREX, ABTS RX & RIDA to ATIOQ */ |
| if (ql2xmvasynctoatio && |
| (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))) { |
| if (qla_tgt_mode_enabled(vha) || |
| qla_dual_mode_enabled(vha)) |
| ha->fw_options[2] |= BIT_11; |
| else |
| ha->fw_options[2] &= ~BIT_11; |
| } |
| |
| if (IS_QLA25XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha) || |
| IS_QLA28XX(ha)) { |
| /* |
| * Tell FW to track each exchange to prevent |
| * driver from using stale exchange. |
| */ |
| if (qla_tgt_mode_enabled(vha) || |
| qla_dual_mode_enabled(vha)) |
| ha->fw_options[2] |= BIT_4; |
| else |
| ha->fw_options[2] &= ~BIT_4; |
| |
| /* Reserve 1/2 of emergency exchanges for ELS.*/ |
| if (qla2xuseresexchforels) |
| ha->fw_options[2] |= BIT_8; |
| else |
| ha->fw_options[2] &= ~BIT_8; |
| } |
| |
| ql_dbg(ql_dbg_init, vha, 0x00e8, |
| "%s, add FW options 1-3 = 0x%04x 0x%04x 0x%04x mode %x\n", |
| __func__, ha->fw_options[1], ha->fw_options[2], |
| ha->fw_options[3], vha->host->active_mode); |
| |
| if (ha->fw_options[1] || ha->fw_options[2] || ha->fw_options[3]) |
| qla2x00_set_fw_options(vha, ha->fw_options); |
| |
| /* Update Serial Link options. */ |
| if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0) |
| return; |
| |
| rval = qla2x00_set_serdes_params(vha, |
| le16_to_cpu(ha->fw_seriallink_options24[1]), |
| le16_to_cpu(ha->fw_seriallink_options24[2]), |
| le16_to_cpu(ha->fw_seriallink_options24[3])); |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x0104, |
| "Unable to update Serial Link options (%x).\n", rval); |
| } |
| } |
| |
| void |
| qla2x00_config_rings(struct scsi_qla_host *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| struct req_que *req = ha->req_q_map[0]; |
| struct rsp_que *rsp = ha->rsp_q_map[0]; |
| |
| /* Setup ring parameters in initialization control block. */ |
| ha->init_cb->request_q_outpointer = cpu_to_le16(0); |
| ha->init_cb->response_q_inpointer = cpu_to_le16(0); |
| ha->init_cb->request_q_length = cpu_to_le16(req->length); |
| ha->init_cb->response_q_length = cpu_to_le16(rsp->length); |
| put_unaligned_le64(req->dma, &ha->init_cb->request_q_address); |
| put_unaligned_le64(rsp->dma, &ha->init_cb->response_q_address); |
| |
| WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0); |
| WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0); |
| WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0); |
| WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0); |
| RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg)); /* PCI Posting. */ |
| } |
| |
| void |
| qla24xx_config_rings(struct scsi_qla_host *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| device_reg_t *reg = ISP_QUE_REG(ha, 0); |
| struct device_reg_2xxx __iomem *ioreg = &ha->iobase->isp; |
| struct qla_msix_entry *msix; |
| struct init_cb_24xx *icb; |
| uint16_t rid = 0; |
| struct req_que *req = ha->req_q_map[0]; |
| struct rsp_que *rsp = ha->rsp_q_map[0]; |
| |
| /* Setup ring parameters in initialization control block. */ |
| icb = (struct init_cb_24xx *)ha->init_cb; |
| icb->request_q_outpointer = cpu_to_le16(0); |
| icb->response_q_inpointer = cpu_to_le16(0); |
| icb->request_q_length = cpu_to_le16(req->length); |
| icb->response_q_length = cpu_to_le16(rsp->length); |
| put_unaligned_le64(req->dma, &icb->request_q_address); |
| put_unaligned_le64(rsp->dma, &icb->response_q_address); |
| |
| /* Setup ATIO queue dma pointers for target mode */ |
| icb->atio_q_inpointer = cpu_to_le16(0); |
| icb->atio_q_length = cpu_to_le16(ha->tgt.atio_q_length); |
| put_unaligned_le64(ha->tgt.atio_dma, &icb->atio_q_address); |
| |
| if (IS_SHADOW_REG_CAPABLE(ha)) |
| icb->firmware_options_2 |= cpu_to_le32(BIT_30|BIT_29); |
| |
| if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha) || |
| IS_QLA28XX(ha)) { |
| icb->qos = cpu_to_le16(QLA_DEFAULT_QUE_QOS); |
| icb->rid = cpu_to_le16(rid); |
| if (ha->flags.msix_enabled) { |
| msix = &ha->msix_entries[1]; |
| ql_dbg(ql_dbg_init, vha, 0x0019, |
| "Registering vector 0x%x for base que.\n", |
| msix->entry); |
| icb->msix = cpu_to_le16(msix->entry); |
| } |
| /* Use alternate PCI bus number */ |
| if (MSB(rid)) |
| icb->firmware_options_2 |= cpu_to_le32(BIT_19); |
| /* Use alternate PCI devfn */ |
| if (LSB(rid)) |
| icb->firmware_options_2 |= cpu_to_le32(BIT_18); |
| |
| /* Use Disable MSIX Handshake mode for capable adapters */ |
| if ((ha->fw_attributes & BIT_6) && (IS_MSIX_NACK_CAPABLE(ha)) && |
| (ha->flags.msix_enabled)) { |
| icb->firmware_options_2 &= cpu_to_le32(~BIT_22); |
| ha->flags.disable_msix_handshake = 1; |
| ql_dbg(ql_dbg_init, vha, 0x00fe, |
| "MSIX Handshake Disable Mode turned on.\n"); |
| } else { |
| icb->firmware_options_2 |= cpu_to_le32(BIT_22); |
| } |
| icb->firmware_options_2 |= cpu_to_le32(BIT_23); |
| |
| WRT_REG_DWORD(®->isp25mq.req_q_in, 0); |
| WRT_REG_DWORD(®->isp25mq.req_q_out, 0); |
| WRT_REG_DWORD(®->isp25mq.rsp_q_in, 0); |
| WRT_REG_DWORD(®->isp25mq.rsp_q_out, 0); |
| } else { |
| WRT_REG_DWORD(®->isp24.req_q_in, 0); |
| WRT_REG_DWORD(®->isp24.req_q_out, 0); |
| WRT_REG_DWORD(®->isp24.rsp_q_in, 0); |
| WRT_REG_DWORD(®->isp24.rsp_q_out, 0); |
| } |
| |
| qlt_24xx_config_rings(vha); |
| |
| /* If the user has configured the speed, set it here */ |
| if (ha->set_data_rate) { |
| ql_dbg(ql_dbg_init, vha, 0x00fd, |
| "Speed set by user : %s Gbps \n", |
| qla2x00_get_link_speed_str(ha, ha->set_data_rate)); |
| icb->firmware_options_3 = (ha->set_data_rate << 13); |
| } |
| |
| /* PCI posting */ |
| RD_REG_DWORD(&ioreg->hccr); |
| } |
| |
| /** |
| * qla2x00_init_rings() - Initializes firmware. |
| * @vha: HA context |
| * |
| * Beginning of request ring has initialization control block already built |
| * by nvram config routine. |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla2x00_init_rings(scsi_qla_host_t *vha) |
| { |
| int rval; |
| unsigned long flags = 0; |
| int cnt, que; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req; |
| struct rsp_que *rsp; |
| struct mid_init_cb_24xx *mid_init_cb = |
| (struct mid_init_cb_24xx *) ha->init_cb; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Clear outstanding commands array. */ |
| for (que = 0; que < ha->max_req_queues; que++) { |
| req = ha->req_q_map[que]; |
| if (!req || !test_bit(que, ha->req_qid_map)) |
| continue; |
| req->out_ptr = (void *)(req->ring + req->length); |
| *req->out_ptr = 0; |
| for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) |
| req->outstanding_cmds[cnt] = NULL; |
| |
| req->current_outstanding_cmd = 1; |
| |
| /* Initialize firmware. */ |
| req->ring_ptr = req->ring; |
| req->ring_index = 0; |
| req->cnt = req->length; |
| } |
| |
| for (que = 0; que < ha->max_rsp_queues; que++) { |
| rsp = ha->rsp_q_map[que]; |
| if (!rsp || !test_bit(que, ha->rsp_qid_map)) |
| continue; |
| rsp->in_ptr = (void *)(rsp->ring + rsp->length); |
| *rsp->in_ptr = 0; |
| /* Initialize response queue entries */ |
| if (IS_QLAFX00(ha)) |
| qlafx00_init_response_q_entries(rsp); |
| else |
| qla2x00_init_response_q_entries(rsp); |
| } |
| |
| ha->tgt.atio_ring_ptr = ha->tgt.atio_ring; |
| ha->tgt.atio_ring_index = 0; |
| /* Initialize ATIO queue entries */ |
| qlt_init_atio_q_entries(vha); |
| |
| ha->isp_ops->config_rings(vha); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| ql_dbg(ql_dbg_init, vha, 0x00d1, "Issue init firmware.\n"); |
| |
| if (IS_QLAFX00(ha)) { |
| rval = qlafx00_init_firmware(vha, ha->init_cb_size); |
| goto next_check; |
| } |
| |
| /* Update any ISP specific firmware options before initialization. */ |
| ha->isp_ops->update_fw_options(vha); |
| |
| if (ha->flags.npiv_supported) { |
| if (ha->operating_mode == LOOP && !IS_CNA_CAPABLE(ha)) |
| ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1; |
| mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports); |
| } |
| |
| if (IS_FWI2_CAPABLE(ha)) { |
| mid_init_cb->options = cpu_to_le16(BIT_1); |
| mid_init_cb->init_cb.execution_throttle = |
| cpu_to_le16(ha->cur_fw_xcb_count); |
| ha->flags.dport_enabled = |
| (mid_init_cb->init_cb.firmware_options_1 & BIT_7) != 0; |
| ql_dbg(ql_dbg_init, vha, 0x0191, "DPORT Support: %s.\n", |
| (ha->flags.dport_enabled) ? "enabled" : "disabled"); |
| /* FA-WWPN Status */ |
| ha->flags.fawwpn_enabled = |
| (mid_init_cb->init_cb.firmware_options_1 & BIT_6) != 0; |
| ql_dbg(ql_dbg_init, vha, 0x00bc, "FA-WWPN Support: %s.\n", |
| (ha->flags.fawwpn_enabled) ? "enabled" : "disabled"); |
| } |
| |
| rval = qla2x00_init_firmware(vha, ha->init_cb_size); |
| next_check: |
| if (rval) { |
| ql_log(ql_log_fatal, vha, 0x00d2, |
| "Init Firmware **** FAILED ****.\n"); |
| } else { |
| ql_dbg(ql_dbg_init, vha, 0x00d3, |
| "Init Firmware -- success.\n"); |
| QLA_FW_STARTED(ha); |
| vha->u_ql2xexchoffld = vha->u_ql2xiniexchg = 0; |
| } |
| |
| return (rval); |
| } |
| |
| /** |
| * qla2x00_fw_ready() - Waits for firmware ready. |
| * @vha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| static int |
| qla2x00_fw_ready(scsi_qla_host_t *vha) |
| { |
| int rval; |
| unsigned long wtime, mtime, cs84xx_time; |
| uint16_t min_wait; /* Minimum wait time if loop is down */ |
| uint16_t wait_time; /* Wait time if loop is coming ready */ |
| uint16_t state[6]; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (IS_QLAFX00(vha->hw)) |
| return qlafx00_fw_ready(vha); |
| |
| rval = QLA_SUCCESS; |
| |
| /* Time to wait for loop down */ |
| if (IS_P3P_TYPE(ha)) |
| min_wait = 30; |
| else |
| min_wait = 20; |
| |
| /* |
| * Firmware should take at most one RATOV to login, plus 5 seconds for |
| * our own processing. |
| */ |
| if ((wait_time = (ha->retry_count*ha->login_timeout) + 5) < min_wait) { |
| wait_time = min_wait; |
| } |
| |
| /* Min wait time if loop down */ |
| mtime = jiffies + (min_wait * HZ); |
| |
| /* wait time before firmware ready */ |
| wtime = jiffies + (wait_time * HZ); |
| |
| /* Wait for ISP to finish LIP */ |
| if (!vha->flags.init_done) |
| ql_log(ql_log_info, vha, 0x801e, |
| "Waiting for LIP to complete.\n"); |
| |
| do { |
| memset(state, -1, sizeof(state)); |
| rval = qla2x00_get_firmware_state(vha, state); |
| if (rval == QLA_SUCCESS) { |
| if (state[0] < FSTATE_LOSS_OF_SYNC) { |
| vha->device_flags &= ~DFLG_NO_CABLE; |
| } |
| if (IS_QLA84XX(ha) && state[0] != FSTATE_READY) { |
| ql_dbg(ql_dbg_taskm, vha, 0x801f, |
| "fw_state=%x 84xx=%x.\n", state[0], |
| state[2]); |
| if ((state[2] & FSTATE_LOGGED_IN) && |
| (state[2] & FSTATE_WAITING_FOR_VERIFY)) { |
| ql_dbg(ql_dbg_taskm, vha, 0x8028, |
| "Sending verify iocb.\n"); |
| |
| cs84xx_time = jiffies; |
| rval = qla84xx_init_chip(vha); |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, |
| vha, 0x8007, |
| "Init chip failed.\n"); |
| break; |
| } |
| |
| /* Add time taken to initialize. */ |
| cs84xx_time = jiffies - cs84xx_time; |
| wtime += cs84xx_time; |
| mtime += cs84xx_time; |
| ql_dbg(ql_dbg_taskm, vha, 0x8008, |
| "Increasing wait time by %ld. " |
| "New time %ld.\n", cs84xx_time, |
| wtime); |
| } |
| } else if (state[0] == FSTATE_READY) { |
| ql_dbg(ql_dbg_taskm, vha, 0x8037, |
| "F/W Ready - OK.\n"); |
| |
| qla2x00_get_retry_cnt(vha, &ha->retry_count, |
| &ha->login_timeout, &ha->r_a_tov); |
| |
| rval = QLA_SUCCESS; |
| break; |
| } |
| |
| rval = QLA_FUNCTION_FAILED; |
| |
| if (atomic_read(&vha->loop_down_timer) && |
| state[0] != FSTATE_READY) { |
| /* Loop down. Timeout on min_wait for states |
| * other than Wait for Login. |
| */ |
| if (time_after_eq(jiffies, mtime)) { |
| ql_log(ql_log_info, vha, 0x8038, |
| "Cable is unplugged...\n"); |
| |
| vha->device_flags |= DFLG_NO_CABLE; |
| break; |
| } |
| } |
| } else { |
| /* Mailbox cmd failed. Timeout on min_wait. */ |
| if (time_after_eq(jiffies, mtime) || |
| ha->flags.isp82xx_fw_hung) |
| break; |
| } |
| |
| if (time_after_eq(jiffies, wtime)) |
| break; |
| |
| /* Delay for a while */ |
| msleep(500); |
| } while (1); |
| |
| ql_dbg(ql_dbg_taskm, vha, 0x803a, |
| "fw_state=%x (%x, %x, %x, %x %x) curr time=%lx.\n", state[0], |
| state[1], state[2], state[3], state[4], state[5], jiffies); |
| |
| if (rval && !(vha->device_flags & DFLG_NO_CABLE)) { |
| ql_log(ql_log_warn, vha, 0x803b, |
| "Firmware ready **** FAILED ****.\n"); |
| } |
| |
| return (rval); |
| } |
| |
| /* |
| * qla2x00_configure_hba |
| * Setup adapter context. |
| * |
| * Input: |
| * ha = adapter state pointer. |
| * |
| * Returns: |
| * 0 = success |
| * |
| * Context: |
| * Kernel context. |
| */ |
| static int |
| qla2x00_configure_hba(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint16_t loop_id; |
| uint16_t topo; |
| uint16_t sw_cap; |
| uint8_t al_pa; |
| uint8_t area; |
| uint8_t domain; |
| char connect_type[22]; |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| port_id_t id; |
| unsigned long flags; |
| |
| /* Get host addresses. */ |
| rval = qla2x00_get_adapter_id(vha, |
| &loop_id, &al_pa, &area, &domain, &topo, &sw_cap); |
| if (rval != QLA_SUCCESS) { |
| if (LOOP_TRANSITION(vha) || atomic_read(&ha->loop_down_timer) || |
| IS_CNA_CAPABLE(ha) || |
| (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) { |
| ql_dbg(ql_dbg_disc, vha, 0x2008, |
| "Loop is in a transition state.\n"); |
| } else { |
| ql_log(ql_log_warn, vha, 0x2009, |
| "Unable to get host loop ID.\n"); |
| if (IS_FWI2_CAPABLE(ha) && (vha == base_vha) && |
| (rval == QLA_COMMAND_ERROR && loop_id == 0x1b)) { |
| ql_log(ql_log_warn, vha, 0x1151, |
| "Doing link init.\n"); |
| if (qla24xx_link_initialize(vha) == QLA_SUCCESS) |
| return rval; |
| } |
| set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); |
| } |
| return (rval); |
| } |
| |
| if (topo == 4) { |
| ql_log(ql_log_info, vha, 0x200a, |
| "Cannot get topology - retrying.\n"); |
| return (QLA_FUNCTION_FAILED); |
| } |
| |
| vha->loop_id = loop_id; |
| |
| /* initialize */ |
| ha->min_external_loopid = SNS_FIRST_LOOP_ID; |
| ha->operating_mode = LOOP; |
| ha->switch_cap = 0; |
| |
| switch (topo) { |
| case 0: |
| ql_dbg(ql_dbg_disc, vha, 0x200b, "HBA in NL topology.\n"); |
| ha->current_topology = ISP_CFG_NL; |
| strcpy(connect_type, "(Loop)"); |
| break; |
| |
| case 1: |
| ql_dbg(ql_dbg_disc, vha, 0x200c, "HBA in FL topology.\n"); |
| ha->switch_cap = sw_cap; |
| ha->current_topology = ISP_CFG_FL; |
| strcpy(connect_type, "(FL_Port)"); |
| break; |
| |
| case 2: |
| ql_dbg(ql_dbg_disc, vha, 0x200d, "HBA in N P2P topology.\n"); |
| ha->operating_mode = P2P; |
| ha->current_topology = ISP_CFG_N; |
| strcpy(connect_type, "(N_Port-to-N_Port)"); |
| break; |
| |
| case 3: |
| ql_dbg(ql_dbg_disc, vha, 0x200e, "HBA in F P2P topology.\n"); |
| ha->switch_cap = sw_cap; |
| ha->operating_mode = P2P; |
| ha->current_topology = ISP_CFG_F; |
| strcpy(connect_type, "(F_Port)"); |
| break; |
| |
| default: |
| ql_dbg(ql_dbg_disc, vha, 0x200f, |
| "HBA in unknown topology %x, using NL.\n", topo); |
| ha->current_topology = ISP_CFG_NL; |
| strcpy(connect_type, "(Loop)"); |
| break; |
| } |
| |
| /* Save Host port and loop ID. */ |
| /* byte order - Big Endian */ |
| id.b.domain = domain; |
| id.b.area = area; |
| id.b.al_pa = al_pa; |
| id.b.rsvd_1 = 0; |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| if (!(topo == 2 && ha->flags.n2n_bigger)) |
| qlt_update_host_map(vha, id); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| if (!vha->flags.init_done) |
| ql_log(ql_log_info, vha, 0x2010, |
| "Topology - %s, Host Loop address 0x%x.\n", |
| connect_type, vha->loop_id); |
| |
| return(rval); |
| } |
| |
| inline void |
| qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len, |
| char *def) |
| { |
| char *st, *en; |
| uint16_t index; |
| uint64_t zero[2] = { 0 }; |
| struct qla_hw_data *ha = vha->hw; |
| int use_tbl = !IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && |
| !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha); |
| |
| if (len > sizeof(zero)) |
| len = sizeof(zero); |
| if (memcmp(model, &zero, len) != 0) { |
| strncpy(ha->model_number, model, len); |
| st = en = ha->model_number; |
| en += len - 1; |
| while (en > st) { |
| if (*en != 0x20 && *en != 0x00) |
| break; |
| *en-- = '\0'; |
| } |
| |
| index = (ha->pdev->subsystem_device & 0xff); |
| if (use_tbl && |
| ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC && |
| index < QLA_MODEL_NAMES) |
| strncpy(ha->model_desc, |
| qla2x00_model_name[index * 2 + 1], |
| sizeof(ha->model_desc) - 1); |
| } else { |
| index = (ha->pdev->subsystem_device & 0xff); |
| if (use_tbl && |
| ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC && |
| index < QLA_MODEL_NAMES) { |
| strcpy(ha->model_number, |
| qla2x00_model_name[index * 2]); |
| strncpy(ha->model_desc, |
| qla2x00_model_name[index * 2 + 1], |
| sizeof(ha->model_desc) - 1); |
| } else { |
| strcpy(ha->model_number, def); |
| } |
| } |
| if (IS_FWI2_CAPABLE(ha)) |
| qla2xxx_get_vpd_field(vha, "\x82", ha->model_desc, |
| sizeof(ha->model_desc)); |
| } |
| |
| /* On sparc systems, obtain port and node WWN from firmware |
| * properties. |
| */ |
| static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *vha, nvram_t *nv) |
| { |
| #ifdef CONFIG_SPARC |
| struct qla_hw_data *ha = vha->hw; |
| struct pci_dev *pdev = ha->pdev; |
| struct device_node *dp = pci_device_to_OF_node(pdev); |
| const u8 *val; |
| int len; |
| |
| val = of_get_property(dp, "port-wwn", &len); |
| if (val && len >= WWN_SIZE) |
| memcpy(nv->port_name, val, WWN_SIZE); |
| |
| val = of_get_property(dp, "node-wwn", &len); |
| if (val && len >= WWN_SIZE) |
| memcpy(nv->node_name, val, WWN_SIZE); |
| #endif |
| } |
| |
| /* |
| * NVRAM configuration for ISP 2xxx |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Output: |
| * initialization control block in response_ring |
| * host adapters parameters in host adapter block |
| * |
| * Returns: |
| * 0 = success. |
| */ |
| int |
| qla2x00_nvram_config(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint8_t chksum = 0; |
| uint16_t cnt; |
| uint8_t *dptr1, *dptr2; |
| struct qla_hw_data *ha = vha->hw; |
| init_cb_t *icb = ha->init_cb; |
| nvram_t *nv = ha->nvram; |
| uint8_t *ptr = ha->nvram; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| |
| rval = QLA_SUCCESS; |
| |
| /* Determine NVRAM starting address. */ |
| ha->nvram_size = sizeof(*nv); |
| ha->nvram_base = 0; |
| if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) |
| if ((RD_REG_WORD(®->ctrl_status) >> 14) == 1) |
| ha->nvram_base = 0x80; |
| |
| /* Get NVRAM data and calculate checksum. */ |
| ha->isp_ops->read_nvram(vha, ptr, ha->nvram_base, ha->nvram_size); |
| for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++) |
| chksum += *ptr++; |
| |
| ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010f, |
| "Contents of NVRAM.\n"); |
| ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0110, |
| nv, ha->nvram_size); |
| |
| /* Bad NVRAM data, set defaults parameters. */ |
| if (chksum || memcmp("ISP ", nv->id, sizeof(nv->id)) || |
| nv->nvram_version < 1) { |
| /* Reset NVRAM data. */ |
| ql_log(ql_log_warn, vha, 0x0064, |
| "Inconsistent NVRAM detected: checksum=%#x id=%.4s version=%#x.\n", |
| chksum, nv->id, nv->nvram_version); |
| ql_log(ql_log_warn, vha, 0x0065, |
| "Falling back to " |
| "functioning (yet invalid -- WWPN) defaults.\n"); |
| |
| /* |
| * Set default initialization control block. |
| */ |
| memset(nv, 0, ha->nvram_size); |
| nv->parameter_block_version = ICB_VERSION; |
| |
| if (IS_QLA23XX(ha)) { |
| nv->firmware_options[0] = BIT_2 | BIT_1; |
| nv->firmware_options[1] = BIT_7 | BIT_5; |
| nv->add_firmware_options[0] = BIT_5; |
| nv->add_firmware_options[1] = BIT_5 | BIT_4; |
| nv->frame_payload_size = 2048; |
| nv->special_options[1] = BIT_7; |
| } else if (IS_QLA2200(ha)) { |
| nv->firmware_options[0] = BIT_2 | BIT_1; |
| nv->firmware_options[1] = BIT_7 | BIT_5; |
| nv->add_firmware_options[0] = BIT_5; |
| nv->add_firmware_options[1] = BIT_5 | BIT_4; |
| nv->frame_payload_size = 1024; |
| } else if (IS_QLA2100(ha)) { |
| nv->firmware_options[0] = BIT_3 | BIT_1; |
| nv->firmware_options[1] = BIT_5; |
| nv->frame_payload_size = 1024; |
| } |
| |
| nv->max_iocb_allocation = cpu_to_le16(256); |
| nv->execution_throttle = cpu_to_le16(16); |
| nv->retry_count = 8; |
| nv->retry_delay = 1; |
| |
| nv->port_name[0] = 33; |
| nv->port_name[3] = 224; |
| nv->port_name[4] = 139; |
| |
| qla2xxx_nvram_wwn_from_ofw(vha, nv); |
| |
| nv->login_timeout = 4; |
| |
| /* |
| * Set default host adapter parameters |
| */ |
| nv->host_p[1] = BIT_2; |
| nv->reset_delay = 5; |
| nv->port_down_retry_count = 8; |
| nv->max_luns_per_target = cpu_to_le16(8); |
| nv->link_down_timeout = 60; |
| |
| rval = 1; |
| } |
| |
| /* Reset Initialization control block */ |
| memset(icb, 0, ha->init_cb_size); |
| |
| /* |
| * Setup driver NVRAM options. |
| */ |
| nv->firmware_options[0] |= (BIT_6 | BIT_1); |
| nv->firmware_options[0] &= ~(BIT_5 | BIT_4); |
| nv->firmware_options[1] |= (BIT_5 | BIT_0); |
| nv->firmware_options[1] &= ~BIT_4; |
| |
| if (IS_QLA23XX(ha)) { |
| nv->firmware_options[0] |= BIT_2; |
| nv->firmware_options[0] &= ~BIT_3; |
| nv->special_options[0] &= ~BIT_6; |
| nv->add_firmware_options[1] |= BIT_5 | BIT_4; |
| |
| if (IS_QLA2300(ha)) { |
| if (ha->fb_rev == FPM_2310) { |
| strcpy(ha->model_number, "QLA2310"); |
| } else { |
| strcpy(ha->model_number, "QLA2300"); |
| } |
| } else { |
| qla2x00_set_model_info(vha, nv->model_number, |
| sizeof(nv->model_number), "QLA23xx"); |
| } |
| } else if (IS_QLA2200(ha)) { |
| nv->firmware_options[0] |= BIT_2; |
| /* |
| * 'Point-to-point preferred, else loop' is not a safe |
| * connection mode setting. |
| */ |
| if ((nv->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) == |
| (BIT_5 | BIT_4)) { |
| /* Force 'loop preferred, else point-to-point'. */ |
| nv->add_firmware_options[0] &= ~(BIT_6 | BIT_5 | BIT_4); |
| nv->add_firmware_options[0] |= BIT_5; |
| } |
| strcpy(ha->model_number, "QLA22xx"); |
| } else /*if (IS_QLA2100(ha))*/ { |
| strcpy(ha->model_number, "QLA2100"); |
| } |
| |
| /* |
| * Copy over NVRAM RISC parameter block to initialization control block. |
| */ |
| dptr1 = (uint8_t *)icb; |
| dptr2 = (uint8_t *)&nv->parameter_block_version; |
| cnt = (uint8_t *)&icb->request_q_outpointer - (uint8_t *)&icb->version; |
| while (cnt--) |
| *dptr1++ = *dptr2++; |
| |
| /* Copy 2nd half. */ |
| dptr1 = (uint8_t *)icb->add_firmware_options; |
| cnt = (uint8_t *)icb->reserved_3 - (uint8_t *)icb->add_firmware_options; |
| while (cnt--) |
| *dptr1++ = *dptr2++; |
| ha->frame_payload_size = le16_to_cpu(icb->frame_payload_size); |
| /* Use alternate WWN? */ |
| if (nv->host_p[1] & BIT_7) { |
| memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE); |
| memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE); |
| } |
| |
| /* Prepare nodename */ |
| if ((icb->firmware_options[1] & BIT_6) == 0) { |
| /* |
| * Firmware will apply the following mask if the nodename was |
| * not provided. |
| */ |
| memcpy(icb->node_name, icb->port_name, WWN_SIZE); |
| icb->node_name[0] &= 0xF0; |
| } |
| |
| /* |
| * Set host adapter parameters. |
| */ |
| |
| /* |
| * BIT_7 in the host-parameters section allows for modification to |
| * internal driver logging. |
| */ |
| if (nv->host_p[0] & BIT_7) |
| ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK; |
| ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0); |
| /* Always load RISC code on non ISP2[12]00 chips. */ |
| if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) |
| ha->flags.disable_risc_code_load = 0; |
| ha->flags.enable_lip_reset = ((nv->host_p[1] & BIT_1) ? 1 : 0); |
| ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0); |
| ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0); |
| ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0; |
| ha->flags.disable_serdes = 0; |
| |
| ha->operating_mode = |
| (icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4; |
| |
| memcpy(ha->fw_seriallink_options, nv->seriallink_options, |
| sizeof(ha->fw_seriallink_options)); |
| |
| /* save HBA serial number */ |
| ha->serial0 = icb->port_name[5]; |
| ha->serial1 = icb->port_name[6]; |
| ha->serial2 = icb->port_name[7]; |
| memcpy(vha->node_name, icb->node_name, WWN_SIZE); |
| memcpy(vha->port_name, icb->port_name, WWN_SIZE); |
| |
| icb->execution_throttle = cpu_to_le16(0xFFFF); |
| |
| ha->retry_count = nv->retry_count; |
| |
| /* Set minimum login_timeout to 4 seconds. */ |
| if (nv->login_timeout != ql2xlogintimeout) |
| nv->login_timeout = ql2xlogintimeout; |
| if (nv->login_timeout < 4) |
| nv->login_timeout = 4; |
| ha->login_timeout = nv->login_timeout; |
| |
| /* Set minimum RATOV to 100 tenths of a second. */ |
| ha->r_a_tov = 100; |
| |
| ha->loop_reset_delay = nv->reset_delay; |
| |
| /* Link Down Timeout = 0: |
| * |
| * When Port Down timer expires we will start returning |
| * I/O's to OS with "DID_NO_CONNECT". |
| * |
| * Link Down Timeout != 0: |
| * |
| * The driver waits for the link to come up after link down |
| * before returning I/Os to OS with "DID_NO_CONNECT". |
| */ |
| if (nv->link_down_timeout == 0) { |
| ha->loop_down_abort_time = |
| (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); |
| } else { |
| ha->link_down_timeout = nv->link_down_timeout; |
| ha->loop_down_abort_time = |
| (LOOP_DOWN_TIME - ha->link_down_timeout); |
| } |
| |
| /* |
| * Need enough time to try and get the port back. |
| */ |
| ha->port_down_retry_count = nv->port_down_retry_count; |
| if (qlport_down_retry) |
| ha->port_down_retry_count = qlport_down_retry; |
| /* Set login_retry_count */ |
| ha->login_retry_count = nv->retry_count; |
| if (ha->port_down_retry_count == nv->port_down_retry_count && |
| ha->port_down_retry_count > 3) |
| ha->login_retry_count = ha->port_down_retry_count; |
| else if (ha->port_down_retry_count > (int)ha->login_retry_count) |
| ha->login_retry_count = ha->port_down_retry_count; |
| if (ql2xloginretrycount) |
| ha->login_retry_count = ql2xloginretrycount; |
| |
| icb->lun_enables = cpu_to_le16(0); |
| icb->command_resource_count = 0; |
| icb->immediate_notify_resource_count = 0; |
| icb->timeout = cpu_to_le16(0); |
| |
| if (IS_QLA2100(ha) || IS_QLA2200(ha)) { |
| /* Enable RIO */ |
| icb->firmware_options[0] &= ~BIT_3; |
| icb->add_firmware_options[0] &= |
| ~(BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| icb->add_firmware_options[0] |= BIT_2; |
| icb->response_accumulation_timer = 3; |
| icb->interrupt_delay_timer = 5; |
| |
| vha->flags.process_response_queue = 1; |
| } else { |
| /* Enable ZIO. */ |
| if (!vha->flags.init_done) { |
| ha->zio_mode = icb->add_firmware_options[0] & |
| (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| ha->zio_timer = icb->interrupt_delay_timer ? |
| icb->interrupt_delay_timer : 2; |
| } |
| icb->add_firmware_options[0] &= |
| ~(BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| vha->flags.process_response_queue = 0; |
| if (ha->zio_mode != QLA_ZIO_DISABLED) { |
| ha->zio_mode = QLA_ZIO_MODE_6; |
| |
| ql_log(ql_log_info, vha, 0x0068, |
| "ZIO mode %d enabled; timer delay (%d us).\n", |
| ha->zio_mode, ha->zio_timer * 100); |
| |
| icb->add_firmware_options[0] |= (uint8_t)ha->zio_mode; |
| icb->interrupt_delay_timer = (uint8_t)ha->zio_timer; |
| vha->flags.process_response_queue = 1; |
| } |
| } |
| |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x0069, |
| "NVRAM configuration failed.\n"); |
| } |
| return (rval); |
| } |
| |
| static void |
| qla2x00_rport_del(void *data) |
| { |
| fc_port_t *fcport = data; |
| struct fc_rport *rport; |
| unsigned long flags; |
| |
| spin_lock_irqsave(fcport->vha->host->host_lock, flags); |
| rport = fcport->drport ? fcport->drport : fcport->rport; |
| fcport->drport = NULL; |
| spin_unlock_irqrestore(fcport->vha->host->host_lock, flags); |
| if (rport) { |
| ql_dbg(ql_dbg_disc, fcport->vha, 0x210b, |
| "%s %8phN. rport %p roles %x\n", |
| __func__, fcport->port_name, rport, |
| rport->roles); |
| |
| fc_remote_port_delete(rport); |
| } |
| } |
| |
| void qla2x00_set_fcport_state(fc_port_t *fcport, int state) |
| { |
| int old_state; |
| |
| old_state = atomic_read(&fcport->state); |
| atomic_set(&fcport->state, state); |
| |
| /* Don't print state transitions during initial allocation of fcport */ |
| if (old_state && old_state != state) { |
| ql_dbg(ql_dbg_disc, fcport->vha, 0x207d, |
| "FCPort %8phC state transitioned from %s to %s - portid=%02x%02x%02x.\n", |
| fcport->port_name, port_state_str[old_state], |
| port_state_str[state], fcport->d_id.b.domain, |
| fcport->d_id.b.area, fcport->d_id.b.al_pa); |
| } |
| } |
| |
| /** |
| * qla2x00_alloc_fcport() - Allocate a generic fcport. |
| * @vha: HA context |
| * @flags: allocation flags |
| * |
| * Returns a pointer to the allocated fcport, or NULL, if none available. |
| */ |
| fc_port_t * |
| qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags) |
| { |
| fc_port_t *fcport; |
| |
| fcport = kzalloc(sizeof(fc_port_t), flags); |
| if (!fcport) |
| return NULL; |
| |
| fcport->ct_desc.ct_sns = dma_alloc_coherent(&vha->hw->pdev->dev, |
| sizeof(struct ct_sns_pkt), &fcport->ct_desc.ct_sns_dma, |
| flags); |
| if (!fcport->ct_desc.ct_sns) { |
| ql_log(ql_log_warn, vha, 0xd049, |
| "Failed to allocate ct_sns request.\n"); |
| kfree(fcport); |
| return NULL; |
| } |
| |
| /* Setup fcport template structure. */ |
| fcport->vha = vha; |
| fcport->port_type = FCT_UNKNOWN; |
| fcport->loop_id = FC_NO_LOOP_ID; |
| qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED); |
| fcport->supported_classes = FC_COS_UNSPECIFIED; |
| fcport->fp_speed = PORT_SPEED_UNKNOWN; |
| |
| fcport->disc_state = DSC_DELETED; |
| fcport->fw_login_state = DSC_LS_PORT_UNAVAIL; |
| fcport->deleted = QLA_SESS_DELETED; |
| fcport->login_retry = vha->hw->login_retry_count; |
| fcport->chip_reset = vha->hw->base_qpair->chip_reset; |
| fcport->logout_on_delete = 1; |
| |
| if (!fcport->ct_desc.ct_sns) { |
| ql_log(ql_log_warn, vha, 0xd049, |
| "Failed to allocate ct_sns request.\n"); |
| kfree(fcport); |
| return NULL; |
| } |
| |
| INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn); |
| INIT_WORK(&fcport->reg_work, qla_register_fcport_fn); |
| INIT_LIST_HEAD(&fcport->gnl_entry); |
| INIT_LIST_HEAD(&fcport->list); |
| |
| return fcport; |
| } |
| |
| void |
| qla2x00_free_fcport(fc_port_t *fcport) |
| { |
| if (fcport->ct_desc.ct_sns) { |
| dma_free_coherent(&fcport->vha->hw->pdev->dev, |
| sizeof(struct ct_sns_pkt), fcport->ct_desc.ct_sns, |
| fcport->ct_desc.ct_sns_dma); |
| |
| fcport->ct_desc.ct_sns = NULL; |
| } |
| list_del(&fcport->list); |
| qla2x00_clear_loop_id(fcport); |
| kfree(fcport); |
| } |
| |
| /* |
| * qla2x00_configure_loop |
| * Updates Fibre Channel Device Database with what is actually on loop. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * 0 = success. |
| * 1 = error. |
| * 2 = database was full and device was not configured. |
| */ |
| static int |
| qla2x00_configure_loop(scsi_qla_host_t *vha) |
| { |
| int rval; |
| unsigned long flags, save_flags; |
| struct qla_hw_data *ha = vha->hw; |
| |
| rval = QLA_SUCCESS; |
| |
| /* Get Initiator ID */ |
| if (test_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags)) { |
| rval = qla2x00_configure_hba(vha); |
| if (rval != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_disc, vha, 0x2013, |
| "Unable to configure HBA.\n"); |
| return (rval); |
| } |
| } |
| |
| save_flags = flags = vha->dpc_flags; |
| ql_dbg(ql_dbg_disc, vha, 0x2014, |
| "Configure loop -- dpc flags = 0x%lx.\n", flags); |
| |
| /* |
| * If we have both an RSCN and PORT UPDATE pending then handle them |
| * both at the same time. |
| */ |
| clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| clear_bit(RSCN_UPDATE, &vha->dpc_flags); |
| |
| qla2x00_get_data_rate(vha); |
| |
| /* Determine what we need to do */ |
| if (ha->current_topology == ISP_CFG_FL && |
| (test_bit(LOCAL_LOOP_UPDATE, &flags))) { |
| |
| set_bit(RSCN_UPDATE, &flags); |
| |
| } else if (ha->current_topology == ISP_CFG_F && |
| (test_bit(LOCAL_LOOP_UPDATE, &flags))) { |
| |
| set_bit(RSCN_UPDATE, &flags); |
| clear_bit(LOCAL_LOOP_UPDATE, &flags); |
| |
| } else if (ha->current_topology == ISP_CFG_N) { |
| clear_bit(RSCN_UPDATE, &flags); |
| if (qla_tgt_mode_enabled(vha)) { |
| /* allow the other side to start the login */ |
| clear_bit(LOCAL_LOOP_UPDATE, &flags); |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| } |
| } else if (ha->current_topology == ISP_CFG_NL) { |
| clear_bit(RSCN_UPDATE, &flags); |
| set_bit(LOCAL_LOOP_UPDATE, &flags); |
| } else if (!vha->flags.online || |
| (test_bit(ABORT_ISP_ACTIVE, &flags))) { |
| set_bit(RSCN_UPDATE, &flags); |
| set_bit(LOCAL_LOOP_UPDATE, &flags); |
| } |
| |
| if (test_bit(LOCAL_LOOP_UPDATE, &flags)) { |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) { |
| ql_dbg(ql_dbg_disc, vha, 0x2015, |
| "Loop resync needed, failing.\n"); |
| rval = QLA_FUNCTION_FAILED; |
| } else |
| rval = qla2x00_configure_local_loop(vha); |
| } |
| |
| if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) { |
| if (LOOP_TRANSITION(vha)) { |
| ql_dbg(ql_dbg_disc, vha, 0x2099, |
| "Needs RSCN update and loop transition.\n"); |
| rval = QLA_FUNCTION_FAILED; |
| } |
| else |
| rval = qla2x00_configure_fabric(vha); |
| } |
| |
| if (rval == QLA_SUCCESS) { |
| if (atomic_read(&vha->loop_down_timer) || |
| test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) { |
| rval = QLA_FUNCTION_FAILED; |
| } else { |
| atomic_set(&vha->loop_state, LOOP_READY); |
| ql_dbg(ql_dbg_disc, vha, 0x2069, |
| "LOOP READY.\n"); |
| ha->flags.fw_init_done = 1; |
| |
| /* |
| * Process any ATIO queue entries that came in |
| * while we weren't online. |
| */ |
| if (qla_tgt_mode_enabled(vha) || |
| qla_dual_mode_enabled(vha)) { |
| spin_lock_irqsave(&ha->tgt.atio_lock, flags); |
| qlt_24xx_process_atio_queue(vha, 0); |
| spin_unlock_irqrestore(&ha->tgt.atio_lock, |
| flags); |
| } |
| } |
| } |
| |
| if (rval) { |
| ql_dbg(ql_dbg_disc, vha, 0x206a, |
| "%s *** FAILED ***.\n", __func__); |
| } else { |
| ql_dbg(ql_dbg_disc, vha, 0x206b, |
| "%s: exiting normally.\n", __func__); |
| } |
| |
| /* Restore state if a resync event occurred during processing */ |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) { |
| if (test_bit(LOCAL_LOOP_UPDATE, &save_flags)) |
| set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| if (test_bit(RSCN_UPDATE, &save_flags)) { |
| set_bit(RSCN_UPDATE, &vha->dpc_flags); |
| } |
| } |
| |
| return (rval); |
| } |
| |
| /* |
| * qla2x00_configure_local_loop |
| * Updates Fibre Channel Device Database with local loop devices. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * 0 = success. |
| */ |
| static int |
| qla2x00_configure_local_loop(scsi_qla_host_t *vha) |
| { |
| int rval, rval2; |
| int found_devs; |
| int found; |
| fc_port_t *fcport, *new_fcport; |
| |
| uint16_t index; |
| uint16_t entries; |
| char *id_iter; |
| uint16_t loop_id; |
| uint8_t domain, area, al_pa; |
| struct qla_hw_data *ha = vha->hw; |
| unsigned long flags; |
| |
| /* Inititae N2N login. */ |
| if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) { |
| /* borrowing */ |
| u32 *bp, i, sz; |
| |
| memset(ha->init_cb, 0, ha->init_cb_size); |
| sz = min_t(int, sizeof(struct els_plogi_payload), |
| ha->init_cb_size); |
| rval = qla24xx_get_port_login_templ(vha, ha->init_cb_dma, |
| (void *)ha->init_cb, sz); |
| if (rval == QLA_SUCCESS) { |
| bp = (uint32_t *)ha->init_cb; |
| for (i = 0; i < sz/4 ; i++, bp++) |
| *bp = cpu_to_be32(*bp); |
| |
| memcpy(&ha->plogi_els_payld.data, (void *)ha->init_cb, |
| sizeof(ha->plogi_els_payld.data)); |
| set_bit(RELOGIN_NEEDED, &vha->dpc_flags); |
| } else { |
| ql_dbg(ql_dbg_init, vha, 0x00d1, |
| "PLOGI ELS param read fail.\n"); |
| } |
| return QLA_SUCCESS; |
| } |
| |
| found_devs = 0; |
| new_fcport = NULL; |
| entries = MAX_FIBRE_DEVICES_LOOP; |
| |
| /* Get list of logged in devices. */ |
| memset(ha->gid_list, 0, qla2x00_gid_list_size(ha)); |
| rval = qla2x00_get_id_list(vha, ha->gid_list, ha->gid_list_dma, |
| &entries); |
| if (rval != QLA_SUCCESS) |
| goto cleanup_allocation; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x2011, |
| "Entries in ID list (%d).\n", entries); |
| ql_dump_buffer(ql_dbg_disc + ql_dbg_buffer, vha, 0x2075, |
| ha->gid_list, entries * sizeof(*ha->gid_list)); |
| |
| if (entries == 0) { |
| spin_lock_irqsave(&vha->work_lock, flags); |
| vha->scan.scan_retry++; |
| spin_unlock_irqrestore(&vha->work_lock, flags); |
| |
| if (vha->scan.scan_retry < MAX_SCAN_RETRIES) { |
| set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| } |
| } else { |
| vha->scan.scan_retry = 0; |
| } |
| |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| fcport->scan_state = QLA_FCPORT_SCAN; |
| } |
| |
| /* Allocate temporary fcport for any new fcports discovered. */ |
| new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); |
| if (new_fcport == NULL) { |
| ql_log(ql_log_warn, vha, 0x2012, |
| "Memory allocation failed for fcport.\n"); |
| rval = QLA_MEMORY_ALLOC_FAILED; |
| goto cleanup_allocation; |
| } |
| new_fcport->flags &= ~FCF_FABRIC_DEVICE; |
| |
| /* Add devices to port list. */ |
| id_iter = (char *)ha->gid_list; |
| for (index = 0; index < entries; index++) { |
| domain = ((struct gid_list_info *)id_iter)->domain; |
| area = ((struct gid_list_info *)id_iter)->area; |
| al_pa = ((struct gid_list_info *)id_iter)->al_pa; |
| if (IS_QLA2100(ha) || IS_QLA2200(ha)) |
| loop_id = (uint16_t) |
| ((struct gid_list_info *)id_iter)->loop_id_2100; |
| else |
| loop_id = le16_to_cpu( |
| ((struct gid_list_info *)id_iter)->loop_id); |
| id_iter += ha->gid_list_info_size; |
| |
| /* Bypass reserved domain fields. */ |
| if ((domain & 0xf0) == 0xf0) |
| continue; |
| |
| /* Bypass if not same domain and area of adapter. */ |
| if (area && domain && ((area != vha->d_id.b.area) || |
| (domain != vha->d_id.b.domain)) && |
| (ha->current_topology == ISP_CFG_NL)) |
| continue; |
| |
| |
| /* Bypass invalid local loop ID. */ |
| if (loop_id > LAST_LOCAL_LOOP_ID) |
| continue; |
| |
| memset(new_fcport->port_name, 0, WWN_SIZE); |
| |
| /* Fill in member data. */ |
| new_fcport->d_id.b.domain = domain; |
| new_fcport->d_id.b.area = area; |
| new_fcport->d_id.b.al_pa = al_pa; |
| new_fcport->loop_id = loop_id; |
| new_fcport->scan_state = QLA_FCPORT_FOUND; |
| |
| rval2 = qla2x00_get_port_database(vha, new_fcport, 0); |
| if (rval2 != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_disc, vha, 0x2097, |
| "Failed to retrieve fcport information " |
| "-- get_port_database=%x, loop_id=0x%04x.\n", |
| rval2, new_fcport->loop_id); |
| /* Skip retry if N2N */ |
| if (ha->current_topology != ISP_CFG_N) { |
| ql_dbg(ql_dbg_disc, vha, 0x2105, |
| "Scheduling resync.\n"); |
| set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| continue; |
| } |
| } |
| |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| /* Check for matching device in port list. */ |
| found = 0; |
| fcport = NULL; |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| if (memcmp(new_fcport->port_name, fcport->port_name, |
| WWN_SIZE)) |
| continue; |
| |
| fcport->flags &= ~FCF_FABRIC_DEVICE; |
| fcport->loop_id = new_fcport->loop_id; |
| fcport->port_type = new_fcport->port_type; |
| fcport->d_id.b24 = new_fcport->d_id.b24; |
| memcpy(fcport->node_name, new_fcport->node_name, |
| WWN_SIZE); |
| fcport->scan_state = QLA_FCPORT_FOUND; |
| found++; |
| break; |
| } |
| |
| if (!found) { |
| /* New device, add to fcports list. */ |
| list_add_tail(&new_fcport->list, &vha->vp_fcports); |
| |
| /* Allocate a new replacement fcport. */ |
| fcport = new_fcport; |
| |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| |
| new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); |
| |
| if (new_fcport == NULL) { |
| ql_log(ql_log_warn, vha, 0xd031, |
| "Failed to allocate memory for fcport.\n"); |
| rval = QLA_MEMORY_ALLOC_FAILED; |
| goto cleanup_allocation; |
| } |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| new_fcport->flags &= ~FCF_FABRIC_DEVICE; |
| } |
| |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| |
| /* Base iIDMA settings on HBA port speed. */ |
| fcport->fp_speed = ha->link_data_rate; |
| |
| found_devs++; |
| } |
| |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| break; |
| |
| if (fcport->scan_state == QLA_FCPORT_SCAN) { |
| if ((qla_dual_mode_enabled(vha) || |
| qla_ini_mode_enabled(vha)) && |
| atomic_read(&fcport->state) == FCS_ONLINE) { |
| qla2x00_mark_device_lost(vha, fcport, |
| ql2xplogiabsentdevice, 0); |
| if (fcport->loop_id != FC_NO_LOOP_ID && |
| (fcport->flags & FCF_FCP2_DEVICE) == 0 && |
| fcport->port_type != FCT_INITIATOR && |
| fcport->port_type != FCT_BROADCAST) { |
| ql_dbg(ql_dbg_disc, vha, 0x20f0, |
| "%s %d %8phC post del sess\n", |
| __func__, __LINE__, |
| fcport->port_name); |
| |
| qlt_schedule_sess_for_deletion(fcport); |
| continue; |
| } |
| } |
| } |
| |
| if (fcport->scan_state == QLA_FCPORT_FOUND) |
| qla24xx_fcport_handle_login(vha, fcport); |
| } |
| |
| cleanup_allocation: |
| kfree(new_fcport); |
| |
| if (rval != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_disc, vha, 0x2098, |
| "Configure local loop error exit: rval=%x.\n", rval); |
| } |
| |
| return (rval); |
| } |
| |
| static void |
| qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) |
| { |
| int rval; |
| uint16_t mb[MAILBOX_REGISTER_COUNT]; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (!IS_IIDMA_CAPABLE(ha)) |
| return; |
| |
| if (atomic_read(&fcport->state) != FCS_ONLINE) |
| return; |
| |
| if (fcport->fp_speed == PORT_SPEED_UNKNOWN || |
| fcport->fp_speed > ha->link_data_rate || |
| !ha->flags.gpsc_supported) |
| return; |
| |
| rval = qla2x00_set_idma_speed(vha, fcport->loop_id, fcport->fp_speed, |
| mb); |
| if (rval != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_disc, vha, 0x2004, |
| "Unable to adjust iIDMA %8phN -- %04x %x %04x %04x.\n", |
| fcport->port_name, rval, fcport->fp_speed, mb[0], mb[1]); |
| } else { |
| ql_dbg(ql_dbg_disc, vha, 0x2005, |
| "iIDMA adjusted to %s GB/s (%X) on %8phN.\n", |
| qla2x00_get_link_speed_str(ha, fcport->fp_speed), |
| fcport->fp_speed, fcport->port_name); |
| } |
| } |
| |
| void qla_do_iidma_work(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| qla2x00_iidma_fcport(vha, fcport); |
| qla24xx_update_fcport_fcp_prio(vha, fcport); |
| } |
| |
| int qla_post_iidma_work(struct scsi_qla_host *vha, fc_port_t *fcport) |
| { |
| struct qla_work_evt *e; |
| |
| e = qla2x00_alloc_work(vha, QLA_EVT_IIDMA); |
| if (!e) |
| return QLA_FUNCTION_FAILED; |
| |
| e->u.fcport.fcport = fcport; |
| return qla2x00_post_work(vha, e); |
| } |
| |
| /* qla2x00_reg_remote_port is reserved for Initiator Mode only.*/ |
| static void |
| qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport) |
| { |
| struct fc_rport_identifiers rport_ids; |
| struct fc_rport *rport; |
| unsigned long flags; |
| |
| if (atomic_read(&fcport->state) == FCS_ONLINE) |
| return; |
| |
| rport_ids.node_name = wwn_to_u64(fcport->node_name); |
| rport_ids.port_name = wwn_to_u64(fcport->port_name); |
| rport_ids.port_id = fcport->d_id.b.domain << 16 | |
| fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa; |
| rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; |
| fcport->rport = rport = fc_remote_port_add(vha->host, 0, &rport_ids); |
| if (!rport) { |
| ql_log(ql_log_warn, vha, 0x2006, |
| "Unable to allocate fc remote port.\n"); |
| return; |
| } |
| |
| spin_lock_irqsave(fcport->vha->host->host_lock, flags); |
| *((fc_port_t **)rport->dd_data) = fcport; |
| spin_unlock_irqrestore(fcport->vha->host->host_lock, flags); |
| |
| rport->supported_classes = fcport->supported_classes; |
| |
| rport_ids.roles = FC_PORT_ROLE_UNKNOWN; |
| if (fcport->port_type == FCT_INITIATOR) |
| rport_ids.roles |= FC_PORT_ROLE_FCP_INITIATOR; |
| if (fcport->port_type == FCT_TARGET) |
| rport_ids.roles |= FC_PORT_ROLE_FCP_TARGET; |
| if (fcport->port_type & FCT_NVME_INITIATOR) |
| rport_ids.roles |= FC_PORT_ROLE_NVME_INITIATOR; |
| if (fcport->port_type & FCT_NVME_TARGET) |
| rport_ids.roles |= FC_PORT_ROLE_NVME_TARGET; |
| if (fcport->port_type & FCT_NVME_DISCOVERY) |
| rport_ids.roles |= FC_PORT_ROLE_NVME_DISCOVERY; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20ee, |
| "%s %8phN. rport %p is %s mode\n", |
| __func__, fcport->port_name, rport, |
| (fcport->port_type == FCT_TARGET) ? "tgt" : |
| ((fcport->port_type & FCT_NVME) ? "nvme" :"ini")); |
| |
| fc_remote_port_rolechg(rport, rport_ids.roles); |
| } |
| |
| /* |
| * qla2x00_update_fcport |
| * Updates device on list. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * fcport = port structure pointer. |
| * |
| * Return: |
| * 0 - Success |
| * BIT_0 - error |
| * |
| * Context: |
| * Kernel context. |
| */ |
| void |
| qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) |
| { |
| if (IS_SW_RESV_ADDR(fcport->d_id)) |
| return; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x20ef, "%s %8phC\n", |
| __func__, fcport->port_name); |
| |
| fcport->disc_state = DSC_UPD_FCPORT; |
| fcport->login_retry = vha->hw->login_retry_count; |
| fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); |
| fcport->deleted = 0; |
| fcport->logout_on_delete = 1; |
| fcport->n2n_chip_reset = fcport->n2n_link_reset_cnt = 0; |
| |
| switch (vha->hw->current_topology) { |
| case ISP_CFG_N: |
| case ISP_CFG_NL: |
| fcport->keep_nport_handle = 1; |
| break; |
| default: |
| break; |
| } |
| |
| qla2x00_iidma_fcport(vha, fcport); |
| |
| if (fcport->fc4f_nvme) { |
| qla_nvme_register_remote(vha, fcport); |
| fcport->disc_state = DSC_LOGIN_COMPLETE; |
| qla2x00_set_fcport_state(fcport, FCS_ONLINE); |
| return; |
| } |
| |
| qla24xx_update_fcport_fcp_prio(vha, fcport); |
| |
| switch (vha->host->active_mode) { |
| case MODE_INITIATOR: |
| qla2x00_reg_remote_port(vha, fcport); |
| break; |
| case MODE_TARGET: |
| if (!vha->vha_tgt.qla_tgt->tgt_stop && |
| !vha->vha_tgt.qla_tgt->tgt_stopped) |
| qlt_fc_port_added(vha, fcport); |
| break; |
| case MODE_DUAL: |
| qla2x00_reg_remote_port(vha, fcport); |
| if (!vha->vha_tgt.qla_tgt->tgt_stop && |
| !vha->vha_tgt.qla_tgt->tgt_stopped) |
| qlt_fc_port_added(vha, fcport); |
| break; |
| default: |
| break; |
| } |
| |
| qla2x00_set_fcport_state(fcport, FCS_ONLINE); |
| |
| if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) { |
| if (fcport->id_changed) { |
| fcport->id_changed = 0; |
| ql_dbg(ql_dbg_disc, vha, 0x20d7, |
| "%s %d %8phC post gfpnid fcp_cnt %d\n", |
| __func__, __LINE__, fcport->port_name, |
| vha->fcport_count); |
| qla24xx_post_gfpnid_work(vha, fcport); |
| } else { |
| ql_dbg(ql_dbg_disc, vha, 0x20d7, |
| "%s %d %8phC post gpsc fcp_cnt %d\n", |
| __func__, __LINE__, fcport->port_name, |
| vha->fcport_count); |
| qla24xx_post_gpsc_work(vha, fcport); |
| } |
| } |
| |
| fcport->disc_state = DSC_LOGIN_COMPLETE; |
| } |
| |
| void qla_register_fcport_fn(struct work_struct *work) |
| { |
| fc_port_t *fcport = container_of(work, struct fc_port, reg_work); |
| u32 rscn_gen = fcport->rscn_gen; |
| u16 data[2]; |
| |
| if (IS_SW_RESV_ADDR(fcport->d_id)) |
| return; |
| |
| qla2x00_update_fcport(fcport->vha, fcport); |
| |
| if (rscn_gen != fcport->rscn_gen) { |
| /* RSCN(s) came in while registration */ |
| switch (fcport->next_disc_state) { |
| case DSC_DELETE_PEND: |
| qlt_schedule_sess_for_deletion(fcport); |
| break; |
| case DSC_ADISC: |
| data[0] = data[1] = 0; |
| qla2x00_post_async_adisc_work(fcport->vha, fcport, |
| data); |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| /* |
| * qla2x00_configure_fabric |
| * Setup SNS devices with loop ID's. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * 0 = success. |
| * BIT_0 = error |
| */ |
| static int |
| qla2x00_configure_fabric(scsi_qla_host_t *vha) |
| { |
| int rval; |
| fc_port_t *fcport; |
| uint16_t mb[MAILBOX_REGISTER_COUNT]; |
| uint16_t loop_id; |
| LIST_HEAD(new_fcports); |
| struct qla_hw_data *ha = vha->hw; |
| int discovery_gen; |
| |
| /* If FL port exists, then SNS is present */ |
| if (IS_FWI2_CAPABLE(ha)) |
| loop_id = NPH_F_PORT; |
| else |
| loop_id = SNS_FL_PORT; |
| rval = qla2x00_get_port_name(vha, loop_id, vha->fabric_node_name, 1); |
| if (rval != QLA_SUCCESS) { |
| ql_dbg(ql_dbg_disc, vha, 0x20a0, |
| "MBX_GET_PORT_NAME failed, No FL Port.\n"); |
| |
| vha->device_flags &= ~SWITCH_FOUND; |
| return (QLA_SUCCESS); |
| } |
| vha->device_flags |= SWITCH_FOUND; |
| |
| |
| if (qla_tgt_mode_enabled(vha) || qla_dual_mode_enabled(vha)) { |
| rval = qla2x00_send_change_request(vha, 0x3, 0); |
| if (rval != QLA_SUCCESS) |
| ql_log(ql_log_warn, vha, 0x121, |
| "Failed to enable receiving of RSCN requests: 0x%x.\n", |
| rval); |
| } |
| |
| |
| do { |
| qla2x00_mgmt_svr_login(vha); |
| |
| /* FDMI support. */ |
| if (ql2xfdmienable && |
| test_and_clear_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags)) |
| qla2x00_fdmi_register(vha); |
| |
| /* Ensure we are logged into the SNS. */ |
| loop_id = NPH_SNS_LID(ha); |
| rval = ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff, |
| 0xfc, mb, BIT_1|BIT_0); |
| if (rval != QLA_SUCCESS || mb[0] != MBS_COMMAND_COMPLETE) { |
| ql_dbg(ql_dbg_disc, vha, 0x20a1, |
| "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x mb[6]=%x mb[7]=%x (%x).\n", |
| loop_id, mb[0], mb[1], mb[2], mb[6], mb[7], rval); |
| set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| return rval; |
| } |
| if (test_and_clear_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags)) { |
| if (qla2x00_rft_id(vha)) { |
| /* EMPTY */ |
| ql_dbg(ql_dbg_disc, vha, 0x20a2, |
| "Register FC-4 TYPE failed.\n"); |
| if (test_bit(LOOP_RESYNC_NEEDED, |
| &vha->dpc_flags)) |
| break; |
| } |
| if (qla2x00_rff_id(vha, FC4_TYPE_FCP_SCSI)) { |
| /* EMPTY */ |
| ql_dbg(ql_dbg_disc, vha, 0x209a, |
| "Register FC-4 Features failed.\n"); |
| if (test_bit(LOOP_RESYNC_NEEDED, |
| &vha->dpc_flags)) |
| break; |
| } |
| if (vha->flags.nvme_enabled) { |
| if (qla2x00_rff_id(vha, FC_TYPE_NVME)) { |
| ql_dbg(ql_dbg_disc, vha, 0x2049, |
| "Register NVME FC Type Features failed.\n"); |
| } |
| } |
| if (qla2x00_rnn_id(vha)) { |
| /* EMPTY */ |
| ql_dbg(ql_dbg_disc, vha, 0x2104, |
| "Register Node Name failed.\n"); |
| if (test_bit(LOOP_RESYNC_NEEDED, |
| &vha->dpc_flags)) |
| break; |
| } else if (qla2x00_rsnn_nn(vha)) { |
| /* EMPTY */ |
| ql_dbg(ql_dbg_disc, vha, 0x209b, |
| "Register Symbolic Node Name failed.\n"); |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| break; |
| } |
| } |
| |
| |
| /* Mark the time right before querying FW for connected ports. |
| * This process is long, asynchronous and by the time it's done, |
| * collected information might not be accurate anymore. E.g. |
| * disconnected port might have re-connected and a brand new |
| * session has been created. In this case session's generation |
| * will be newer than discovery_gen. */ |
| qlt_do_generation_tick(vha, &discovery_gen); |
| |
| if (USE_ASYNC_SCAN(ha)) { |
| rval = qla24xx_async_gpnft(vha, FC4_TYPE_FCP_SCSI, |
| NULL); |
| if (rval) |
| set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| } else { |
| list_for_each_entry(fcport, &vha->vp_fcports, list) |
| fcport->scan_state = QLA_FCPORT_SCAN; |
| |
| rval = qla2x00_find_all_fabric_devs(vha); |
| } |
| if (rval != QLA_SUCCESS) |
| break; |
| } while (0); |
| |
| if (!vha->nvme_local_port && vha->flags.nvme_enabled) |
| qla_nvme_register_hba(vha); |
| |
| if (rval) |
| ql_dbg(ql_dbg_disc, vha, 0x2068, |
| "Configure fabric error exit rval=%d.\n", rval); |
| |
| return (rval); |
| } |
| |
| /* |
| * qla2x00_find_all_fabric_devs |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * dev = database device entry pointer. |
| * |
| * Returns: |
| * 0 = success. |
| * |
| * Context: |
| * Kernel context. |
| */ |
| static int |
| qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint16_t loop_id; |
| fc_port_t *fcport, *new_fcport; |
| int found; |
| |
| sw_info_t *swl; |
| int swl_idx; |
| int first_dev, last_dev; |
| port_id_t wrap = {}, nxt_d_id; |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| unsigned long flags; |
| |
| rval = QLA_SUCCESS; |
| |
| /* Try GID_PT to get device list, else GAN. */ |
| if (!ha->swl) |
| ha->swl = kcalloc(ha->max_fibre_devices, sizeof(sw_info_t), |
| GFP_KERNEL); |
| swl = ha->swl; |
| if (!swl) { |
| /*EMPTY*/ |
| ql_dbg(ql_dbg_disc, vha, 0x209c, |
| "GID_PT allocations failed, fallback on GA_NXT.\n"); |
| } else { |
| memset(swl, 0, ha->max_fibre_devices * sizeof(sw_info_t)); |
| if (qla2x00_gid_pt(vha, swl) != QLA_SUCCESS) { |
| swl = NULL; |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| return rval; |
| } else if (qla2x00_gpn_id(vha, swl) != QLA_SUCCESS) { |
| swl = NULL; |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| return rval; |
| } else if (qla2x00_gnn_id(vha, swl) != QLA_SUCCESS) { |
| swl = NULL; |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| return rval; |
| } else if (qla2x00_gfpn_id(vha, swl) != QLA_SUCCESS) { |
| swl = NULL; |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| return rval; |
| } |
| |
| /* If other queries succeeded probe for FC-4 type */ |
| if (swl) { |
| qla2x00_gff_id(vha, swl); |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| return rval; |
| } |
| } |
| swl_idx = 0; |
| |
| /* Allocate temporary fcport for any new fcports discovered. */ |
| new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); |
| if (new_fcport == NULL) { |
| ql_log(ql_log_warn, vha, 0x209d, |
| "Failed to allocate memory for fcport.\n"); |
| return (QLA_MEMORY_ALLOC_FAILED); |
| } |
| new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED); |
| /* Set start port ID scan at adapter ID. */ |
| first_dev = 1; |
| last_dev = 0; |
| |
| /* Starting free loop ID. */ |
| loop_id = ha->min_external_loopid; |
| for (; loop_id <= ha->max_loop_id; loop_id++) { |
| if (qla2x00_is_reserved_id(vha, loop_id)) |
| continue; |
| |
| if (ha->current_topology == ISP_CFG_FL && |
| (atomic_read(&vha->loop_down_timer) || |
| LOOP_TRANSITION(vha))) { |
| atomic_set(&vha->loop_down_timer, 0); |
| set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| break; |
| } |
| |
| if (swl != NULL) { |
| if (last_dev) { |
| wrap.b24 = new_fcport->d_id.b24; |
| } else { |
| new_fcport->d_id.b24 = swl[swl_idx].d_id.b24; |
| memcpy(new_fcport->node_name, |
| swl[swl_idx].node_name, WWN_SIZE); |
| memcpy(new_fcport->port_name, |
| swl[swl_idx].port_name, WWN_SIZE); |
| memcpy(new_fcport->fabric_port_name, |
| swl[swl_idx].fabric_port_name, WWN_SIZE); |
| new_fcport->fp_speed = swl[swl_idx].fp_speed; |
| new_fcport->fc4_type = swl[swl_idx].fc4_type; |
| |
| new_fcport->nvme_flag = 0; |
| new_fcport->fc4f_nvme = 0; |
| if (vha->flags.nvme_enabled && |
| swl[swl_idx].fc4f_nvme) { |
| new_fcport->fc4f_nvme = |
| swl[swl_idx].fc4f_nvme; |
| ql_log(ql_log_info, vha, 0x2131, |
| "FOUND: NVME port %8phC as FC Type 28h\n", |
| new_fcport->port_name); |
| } |
| |
| if (swl[swl_idx].d_id.b.rsvd_1 != 0) { |
| last_dev = 1; |
| } |
| swl_idx++; |
| } |
| } else { |
| /* Send GA_NXT to the switch */ |
| rval = qla2x00_ga_nxt(vha, new_fcport); |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x209e, |
| "SNS scan failed -- assuming " |
| "zero-entry result.\n"); |
| rval = QLA_SUCCESS; |
| break; |
| } |
| } |
| |
| /* If wrap on switch device list, exit. */ |
| if (first_dev) { |
| wrap.b24 = new_fcport->d_id.b24; |
| first_dev = 0; |
| } else if (new_fcport->d_id.b24 == wrap.b24) { |
| ql_dbg(ql_dbg_disc, vha, 0x209f, |
| "Device wrap (%02x%02x%02x).\n", |
| new_fcport->d_id.b.domain, |
| new_fcport->d_id.b.area, |
| new_fcport->d_id.b.al_pa); |
| break; |
| } |
| |
| /* Bypass if same physical adapter. */ |
| if (new_fcport->d_id.b24 == base_vha->d_id.b24) |
| continue; |
| |
| /* Bypass virtual ports of the same host. */ |
| if (qla2x00_is_a_vp_did(vha, new_fcport->d_id.b24)) |
| continue; |
| |
| /* Bypass if same domain and area of adapter. */ |
| if (((new_fcport->d_id.b24 & 0xffff00) == |
| (vha->d_id.b24 & 0xffff00)) && ha->current_topology == |
| ISP_CFG_FL) |
| continue; |
| |
| /* Bypass reserved domain fields. */ |
| if ((new_fcport->d_id.b.domain & 0xf0) == 0xf0) |
| continue; |
| |
| /* Bypass ports whose FCP-4 type is not FCP_SCSI */ |
| if (ql2xgffidenable && |
| (new_fcport->fc4_type != FC4_TYPE_FCP_SCSI && |
| new_fcport->fc4_type != FC4_TYPE_UNKNOWN)) |
| continue; |
| |
| spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); |
| |
| /* Locate matching device in database. */ |
| found = 0; |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| if (memcmp(new_fcport->port_name, fcport->port_name, |
| WWN_SIZE)) |
| continue; |
| |
| fcport->scan_state = QLA_FCPORT_FOUND; |
| |
| found++; |
| |
| /* Update port state. */ |
| memcpy(fcport->fabric_port_name, |
| new_fcport->fabric_port_name, WWN_SIZE); |
| fcport->fp_speed = new_fcport->fp_speed; |
| |
| /* |
| * If address the same and state FCS_ONLINE |
| * (or in target mode), nothing changed. |
| */ |
| if (fcport->d_id.b24 == new_fcport->d_id.b24 && |
| (atomic_read(&fcport->state) == FCS_ONLINE || |
| (vha->host->active_mode == MODE_TARGET))) { |
| break; |
| } |
| |
| /* |
| * If device was not a fabric device before. |
| */ |
| if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) { |
| fcport->d_id.b24 = new_fcport->d_id.b24; |
| qla2x00_clear_loop_id(fcport); |
| fcport->flags |= (FCF_FABRIC_DEVICE | |
| FCF_LOGIN_NEEDED); |
| break; |
| } |
| |
| /* |
| * Port ID changed or device was marked to be updated; |
| * Log it out if still logged in and mark it for |
| * relogin later. |
| */ |
| if (qla_tgt_mode_enabled(base_vha)) { |
| ql_dbg(ql_dbg_tgt_mgt, vha, 0xf080, |
| "port changed FC ID, %8phC" |
| " old %x:%x:%x (loop_id 0x%04x)-> new %x:%x:%x\n", |
| fcport->port_name, |
| fcport->d_id.b.domain, |
| fcport->d_id.b.area, |
| fcport->d_id.b.al_pa, |
| fcport->loop_id, |
| new_fcport->d_id.b.domain, |
| new_fcport->d_id.b.area, |
| new_fcport->d_id.b.al_pa); |
| fcport->d_id.b24 = new_fcport->d_id.b24; |
| break; |
| } |
| |
| fcport->d_id.b24 = new_fcport->d_id.b24; |
| fcport->flags |= FCF_LOGIN_NEEDED; |
| break; |
| } |
| |
| if (fcport->fc4f_nvme) { |
| if (fcport->disc_state == DSC_DELETE_PEND) { |
| fcport->disc_state = DSC_GNL; |
| vha->fcport_count--; |
| fcport->login_succ = 0; |
| } |
| } |
| |
| if (found) { |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| continue; |
| } |
| /* If device was not in our fcports list, then add it. */ |
| new_fcport->scan_state = QLA_FCPORT_FOUND; |
| list_add_tail(&new_fcport->list, &vha->vp_fcports); |
| |
| spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); |
| |
| |
| /* Allocate a new replacement fcport. */ |
| nxt_d_id.b24 = new_fcport->d_id.b24; |
| new_fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); |
| if (new_fcport == NULL) { |
| ql_log(ql_log_warn, vha, 0xd032, |
| "Memory allocation failed for fcport.\n"); |
| return (QLA_MEMORY_ALLOC_FAILED); |
| } |
| new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED); |
| new_fcport->d_id.b24 = nxt_d_id.b24; |
| } |
| |
| qla2x00_free_fcport(new_fcport); |
| |
| /* |
| * Logout all previous fabric dev marked lost, except FCP2 devices. |
| */ |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) |
| break; |
| |
| if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 || |
| (fcport->flags & FCF_LOGIN_NEEDED) == 0) |
| continue; |
| |
| if (fcport->scan_state == QLA_FCPORT_SCAN) { |
| if ((qla_dual_mode_enabled(vha) || |
| qla_ini_mode_enabled(vha)) && |
| atomic_read(&fcport->state) == FCS_ONLINE) { |
| qla2x00_mark_device_lost(vha, fcport, |
| ql2xplogiabsentdevice, 0); |
| if (fcport->loop_id != FC_NO_LOOP_ID && |
| (fcport->flags & FCF_FCP2_DEVICE) == 0 && |
| fcport->port_type != FCT_INITIATOR && |
| fcport->port_type != FCT_BROADCAST) { |
| ql_dbg(ql_dbg_disc, vha, 0x20f0, |
| "%s %d %8phC post del sess\n", |
| __func__, __LINE__, |
| fcport->port_name); |
| qlt_schedule_sess_for_deletion(fcport); |
| continue; |
| } |
| } |
| } |
| |
| if (fcport->scan_state == QLA_FCPORT_FOUND) |
| qla24xx_fcport_handle_login(vha, fcport); |
| } |
| return (rval); |
| } |
| |
| /* FW does not set aside Loop id for MGMT Server/FFFFFAh */ |
| int |
| qla2x00_reserve_mgmt_server_loop_id(scsi_qla_host_t *vha) |
| { |
| int loop_id = FC_NO_LOOP_ID; |
| int lid = NPH_MGMT_SERVER - vha->vp_idx; |
| unsigned long flags; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (vha->vp_idx == 0) { |
| set_bit(NPH_MGMT_SERVER, ha->loop_id_map); |
| return NPH_MGMT_SERVER; |
| } |
| |
| /* pick id from high and work down to low */ |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| for (; lid > 0; lid--) { |
| if (!test_bit(lid, vha->hw->loop_id_map)) { |
| set_bit(lid, vha->hw->loop_id_map); |
| loop_id = lid; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| return loop_id; |
| } |
| |
| /* |
| * qla2x00_fabric_login |
| * Issue fabric login command. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * device = pointer to FC device type structure. |
| * |
| * Returns: |
| * 0 - Login successfully |
| * 1 - Login failed |
| * 2 - Initiator device |
| * 3 - Fatal error |
| */ |
| int |
| qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport, |
| uint16_t *next_loopid) |
| { |
| int rval; |
| int retry; |
| uint16_t tmp_loopid; |
| uint16_t mb[MAILBOX_REGISTER_COUNT]; |
| struct qla_hw_data *ha = vha->hw; |
| |
| retry = 0; |
| tmp_loopid = 0; |
| |
| for (;;) { |
| ql_dbg(ql_dbg_disc, vha, 0x2000, |
| "Trying Fabric Login w/loop id 0x%04x for port " |
| "%02x%02x%02x.\n", |
| fcport->loop_id, fcport->d_id.b.domain, |
| fcport->d_id.b.area, fcport->d_id.b.al_pa); |
| |
| /* Login fcport on switch. */ |
| rval = ha->isp_ops->fabric_login(vha, fcport->loop_id, |
| fcport->d_id.b.domain, fcport->d_id.b.area, |
| fcport->d_id.b.al_pa, mb, BIT_0); |
| if (rval != QLA_SUCCESS) { |
| return rval; |
| } |
| if (mb[0] == MBS_PORT_ID_USED) { |
| /* |
| * Device has another loop ID. The firmware team |
| * recommends the driver perform an implicit login with |
| * the specified ID again. The ID we just used is save |
| * here so we return with an ID that can be tried by |
| * the next login. |
| */ |
| retry++; |
| tmp_loopid = fcport->loop_id; |
| fcport->loop_id = mb[1]; |
| |
| ql_dbg(ql_dbg_disc, vha, 0x2001, |
| "Fabric Login: port in use - next loop " |
| "id=0x%04x, port id= %02x%02x%02x.\n", |
| fcport->loop_id, fcport->d_id.b.domain, |
| fcport->d_id.b.area, fcport->d_id.b.al_pa); |
| |
| } else if (mb[0] == MBS_COMMAND_COMPLETE) { |
| /* |
| * Login succeeded. |
| */ |
| if (retry) { |
| /* A retry occurred before. */ |
| *next_loopid = tmp_loopid; |
| } else { |
| /* |
| * No retry occurred before. Just increment the |
| * ID value for next login. |
| */ |
| *next_loopid = (fcport->loop_id + 1); |
| } |
| |
| if (mb[1] & BIT_0) { |
| fcport->port_type = FCT_INITIATOR; |
| } else { |
| fcport->port_type = FCT_TARGET; |
| if (mb[1] & BIT_1) { |
| fcport->flags |= FCF_FCP2_DEVICE; |
| } |
| } |
| |
| if (mb[10] & BIT_0) |
| fcport->supported_classes |= FC_COS_CLASS2; |
| if (mb[10] & BIT_1) |
| fcport->supported_classes |= FC_COS_CLASS3; |
| |
| if (IS_FWI2_CAPABLE(ha)) { |
| if (mb[10] & BIT_7) |
| fcport->flags |= |
| FCF_CONF_COMP_SUPPORTED; |
| } |
| |
| rval = QLA_SUCCESS; |
| break; |
| } else if (mb[0] == MBS_LOOP_ID_USED) { |
| /* |
| * Loop ID already used, try next loop ID. |
| */ |
| fcport->loop_id++; |
| rval = qla2x00_find_new_loop_id(vha, fcport); |
| if (rval != QLA_SUCCESS) { |
| /* Ran out of loop IDs to use */ |
| break; |
| } |
| } else if (mb[0] == MBS_COMMAND_ERROR) { |
| /* |
| * Firmware possibly timed out during login. If NO |
| * retries are left to do then the device is declared |
| * dead. |
| */ |
| *next_loopid = fcport->loop_id; |
| ha->isp_ops->fabric_logout(vha, fcport->loop_id, |
| fcport->d_id.b.domain, fcport->d_id.b.area, |
| fcport->d_id.b.al_pa); |
| qla2x00_mark_device_lost(vha, fcport, 1, 0); |
| |
| rval = 1; |
| break; |
| } else { |
| /* |
| * unrecoverable / not handled error |
| */ |
| ql_dbg(ql_dbg_disc, vha, 0x2002, |
| "Failed=%x port_id=%02x%02x%02x loop_id=%x " |
| "jiffies=%lx.\n", mb[0], fcport->d_id.b.domain, |
| fcport->d_id.b.area, fcport->d_id.b.al_pa, |
| fcport->loop_id, jiffies); |
| |
| *next_loopid = fcport->loop_id; |
| ha->isp_ops->fabric_logout(vha, fcport->loop_id, |
| fcport->d_id.b.domain, fcport->d_id.b.area, |
| fcport->d_id.b.al_pa); |
| qla2x00_clear_loop_id(fcport); |
| fcport->login_retry = 0; |
| |
| rval = 3; |
| break; |
| } |
| } |
| |
| return (rval); |
| } |
| |
| /* |
| * qla2x00_local_device_login |
| * Issue local device login command. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * loop_id = loop id of device to login to. |
| * |
| * Returns (Where's the #define!!!!): |
| * 0 - Login successfully |
| * 1 - Login failed |
| * 3 - Fatal error |
| */ |
| int |
| qla2x00_local_device_login(scsi_qla_host_t *vha, fc_port_t *fcport) |
| { |
| int rval; |
| uint16_t mb[MAILBOX_REGISTER_COUNT]; |
| |
| memset(mb, 0, sizeof(mb)); |
| rval = qla2x00_login_local_device(vha, fcport, mb, BIT_0); |
| if (rval == QLA_SUCCESS) { |
| /* Interrogate mailbox registers for any errors */ |
| if (mb[0] == MBS_COMMAND_ERROR) |
| rval = 1; |
| else if (mb[0] == MBS_COMMAND_PARAMETER_ERROR) |
| /* device not in PCB table */ |
| rval = 3; |
| } |
| |
| return (rval); |
| } |
| |
| /* |
| * qla2x00_loop_resync |
| * Resync with fibre channel devices. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * 0 = success |
| */ |
| int |
| qla2x00_loop_resync(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| uint32_t wait_time; |
| |
| clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| if (vha->flags.online) { |
| if (!(rval = qla2x00_fw_ready(vha))) { |
| /* Wait at most MAX_TARGET RSCNs for a stable link. */ |
| wait_time = 256; |
| do { |
| if (!IS_QLAFX00(vha->hw)) { |
| /* |
| * Issue a marker after FW becomes |
| * ready. |
| */ |
| qla2x00_marker(vha, vha->hw->base_qpair, |
| 0, 0, MK_SYNC_ALL); |
| vha->marker_needed = 0; |
| } |
| |
| /* Remap devices on Loop. */ |
| clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| |
| if (IS_QLAFX00(vha->hw)) |
| qlafx00_configure_devices(vha); |
| else |
| qla2x00_configure_loop(vha); |
| |
| wait_time--; |
| } while (!atomic_read(&vha->loop_down_timer) && |
| !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) |
| && wait_time && (test_bit(LOOP_RESYNC_NEEDED, |
| &vha->dpc_flags))); |
| } |
| } |
| |
| if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) |
| return (QLA_FUNCTION_FAILED); |
| |
| if (rval) |
| ql_dbg(ql_dbg_disc, vha, 0x206c, |
| "%s *** FAILED ***.\n", __func__); |
| |
| return (rval); |
| } |
| |
| /* |
| * qla2x00_perform_loop_resync |
| * Description: This function will set the appropriate flags and call |
| * qla2x00_loop_resync. If successful loop will be resynced |
| * Arguments : scsi_qla_host_t pointer |
| * returm : Success or Failure |
| */ |
| |
| int qla2x00_perform_loop_resync(scsi_qla_host_t *ha) |
| { |
| int32_t rval = 0; |
| |
| if (!test_and_set_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) { |
| /*Configure the flags so that resync happens properly*/ |
| atomic_set(&ha->loop_down_timer, 0); |
| if (!(ha->device_flags & DFLG_NO_CABLE)) { |
| atomic_set(&ha->loop_state, LOOP_UP); |
| set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); |
| set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags); |
| set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); |
| |
| rval = qla2x00_loop_resync(ha); |
| } else |
| atomic_set(&ha->loop_state, LOOP_DEAD); |
| |
| clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags); |
| } |
| |
| return rval; |
| } |
| |
| void |
| qla2x00_update_fcports(scsi_qla_host_t *base_vha) |
| { |
| fc_port_t *fcport; |
| struct scsi_qla_host *vha; |
| struct qla_hw_data *ha = base_vha->hw; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| /* Go with deferred removal of rport references. */ |
| list_for_each_entry(vha, &base_vha->hw->vp_list, list) { |
| atomic_inc(&vha->vref_count); |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| if (fcport->drport && |
| atomic_read(&fcport->state) != FCS_UNCONFIGURED) { |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| qla2x00_rport_del(fcport); |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| } |
| } |
| atomic_dec(&vha->vref_count); |
| wake_up(&vha->vref_waitq); |
| } |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| } |
| |
| /* Assumes idc_lock always held on entry */ |
| void |
| qla83xx_reset_ownership(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t drv_presence, drv_presence_mask; |
| uint32_t dev_part_info1, dev_part_info2, class_type; |
| uint32_t class_type_mask = 0x3; |
| uint16_t fcoe_other_function = 0xffff, i; |
| |
| if (IS_QLA8044(ha)) { |
| drv_presence = qla8044_rd_direct(vha, |
| QLA8044_CRB_DRV_ACTIVE_INDEX); |
| dev_part_info1 = qla8044_rd_direct(vha, |
| QLA8044_CRB_DEV_PART_INFO_INDEX); |
| dev_part_info2 = qla8044_rd_direct(vha, |
| QLA8044_CRB_DEV_PART_INFO2); |
| } else { |
| qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence); |
| qla83xx_rd_reg(vha, QLA83XX_DEV_PARTINFO1, &dev_part_info1); |
| qla83xx_rd_reg(vha, QLA83XX_DEV_PARTINFO2, &dev_part_info2); |
| } |
| for (i = 0; i < 8; i++) { |
| class_type = ((dev_part_info1 >> (i * 4)) & class_type_mask); |
| if ((class_type == QLA83XX_CLASS_TYPE_FCOE) && |
| (i != ha->portnum)) { |
| fcoe_other_function = i; |
| break; |
| } |
| } |
| if (fcoe_other_function == 0xffff) { |
| for (i = 0; i < 8; i++) { |
| class_type = ((dev_part_info2 >> (i * 4)) & |
| class_type_mask); |
| if ((class_type == QLA83XX_CLASS_TYPE_FCOE) && |
| ((i + 8) != ha->portnum)) { |
| fcoe_other_function = i + 8; |
| break; |
| } |
| } |
| } |
| /* |
| * Prepare drv-presence mask based on fcoe functions present. |
| * However consider only valid physical fcoe function numbers (0-15). |
| */ |
| drv_presence_mask = ~((1 << (ha->portnum)) | |
| ((fcoe_other_function == 0xffff) ? |
| 0 : (1 << (fcoe_other_function)))); |
| |
| /* We are the reset owner iff: |
| * - No other protocol drivers present. |
| * - This is the lowest among fcoe functions. */ |
| if (!(drv_presence & drv_presence_mask) && |
| (ha->portnum < fcoe_other_function)) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb07f, |
| "This host is Reset owner.\n"); |
| ha->flags.nic_core_reset_owner = 1; |
| } |
| } |
| |
| static int |
| __qla83xx_set_drv_ack(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t drv_ack; |
| |
| rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack); |
| if (rval == QLA_SUCCESS) { |
| drv_ack |= (1 << ha->portnum); |
| rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRIVER_ACK, drv_ack); |
| } |
| |
| return rval; |
| } |
| |
| static int |
| __qla83xx_clear_drv_ack(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t drv_ack; |
| |
| rval = qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack); |
| if (rval == QLA_SUCCESS) { |
| drv_ack &= ~(1 << ha->portnum); |
| rval = qla83xx_wr_reg(vha, QLA83XX_IDC_DRIVER_ACK, drv_ack); |
| } |
| |
| return rval; |
| } |
| |
| static const char * |
| qla83xx_dev_state_to_string(uint32_t dev_state) |
| { |
| switch (dev_state) { |
| case QLA8XXX_DEV_COLD: |
| return "COLD/RE-INIT"; |
| case QLA8XXX_DEV_INITIALIZING: |
| return "INITIALIZING"; |
| case QLA8XXX_DEV_READY: |
| return "READY"; |
| case QLA8XXX_DEV_NEED_RESET: |
| return "NEED RESET"; |
| case QLA8XXX_DEV_NEED_QUIESCENT: |
| return "NEED QUIESCENT"; |
| case QLA8XXX_DEV_FAILED: |
| return "FAILED"; |
| case QLA8XXX_DEV_QUIESCENT: |
| return "QUIESCENT"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| /* Assumes idc-lock always held on entry */ |
| void |
| qla83xx_idc_audit(scsi_qla_host_t *vha, int audit_type) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t idc_audit_reg = 0, duration_secs = 0; |
| |
| switch (audit_type) { |
| case IDC_AUDIT_TIMESTAMP: |
| ha->idc_audit_ts = (jiffies_to_msecs(jiffies) / 1000); |
| idc_audit_reg = (ha->portnum) | |
| (IDC_AUDIT_TIMESTAMP << 7) | (ha->idc_audit_ts << 8); |
| qla83xx_wr_reg(vha, QLA83XX_IDC_AUDIT, idc_audit_reg); |
| break; |
| |
| case IDC_AUDIT_COMPLETION: |
| duration_secs = ((jiffies_to_msecs(jiffies) - |
| jiffies_to_msecs(ha->idc_audit_ts)) / 1000); |
| idc_audit_reg = (ha->portnum) | |
| (IDC_AUDIT_COMPLETION << 7) | (duration_secs << 8); |
| qla83xx_wr_reg(vha, QLA83XX_IDC_AUDIT, idc_audit_reg); |
| break; |
| |
| default: |
| ql_log(ql_log_warn, vha, 0xb078, |
| "Invalid audit type specified.\n"); |
| break; |
| } |
| } |
| |
| /* Assumes idc_lock always held on entry */ |
| static int |
| qla83xx_initiating_reset(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t idc_control, dev_state; |
| |
| __qla83xx_get_idc_control(vha, &idc_control); |
| if ((idc_control & QLA83XX_IDC_RESET_DISABLED)) { |
| ql_log(ql_log_info, vha, 0xb080, |
| "NIC Core reset has been disabled. idc-control=0x%x\n", |
| idc_control); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| /* Set NEED-RESET iff in READY state and we are the reset-owner */ |
| qla83xx_rd_reg(vha, QLA83XX_IDC_DEV_STATE, &dev_state); |
| if (ha->flags.nic_core_reset_owner && dev_state == QLA8XXX_DEV_READY) { |
| qla83xx_wr_reg(vha, QLA83XX_IDC_DEV_STATE, |
| QLA8XXX_DEV_NEED_RESET); |
| ql_log(ql_log_info, vha, 0xb056, "HW State: NEED RESET.\n"); |
| qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP); |
| } else { |
| const char *state = qla83xx_dev_state_to_string(dev_state); |
| |
| ql_log(ql_log_info, vha, 0xb057, "HW State: %s.\n", state); |
| |
| /* SV: XXX: Is timeout required here? */ |
| /* Wait for IDC state change READY -> NEED_RESET */ |
| while (dev_state == QLA8XXX_DEV_READY) { |
| qla83xx_idc_unlock(vha, 0); |
| msleep(200); |
| qla83xx_idc_lock(vha, 0); |
| qla83xx_rd_reg(vha, QLA83XX_IDC_DEV_STATE, &dev_state); |
| } |
| } |
| |
| /* Send IDC ack by writing to drv-ack register */ |
| __qla83xx_set_drv_ack(vha); |
| |
| return QLA_SUCCESS; |
| } |
| |
| int |
| __qla83xx_set_idc_control(scsi_qla_host_t *vha, uint32_t idc_control) |
| { |
| return qla83xx_wr_reg(vha, QLA83XX_IDC_CONTROL, idc_control); |
| } |
| |
| int |
| __qla83xx_get_idc_control(scsi_qla_host_t *vha, uint32_t *idc_control) |
| { |
| return qla83xx_rd_reg(vha, QLA83XX_IDC_CONTROL, idc_control); |
| } |
| |
| static int |
| qla83xx_check_driver_presence(scsi_qla_host_t *vha) |
| { |
| uint32_t drv_presence = 0; |
| struct qla_hw_data *ha = vha->hw; |
| |
| qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence); |
| if (drv_presence & (1 << ha->portnum)) |
| return QLA_SUCCESS; |
| else |
| return QLA_TEST_FAILED; |
| } |
| |
| int |
| qla83xx_nic_core_reset(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb058, |
| "Entered %s().\n", __func__); |
| |
| if (vha->device_flags & DFLG_DEV_FAILED) { |
| ql_log(ql_log_warn, vha, 0xb059, |
| "Device in unrecoverable FAILED state.\n"); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| qla83xx_idc_lock(vha, 0); |
| |
| if (qla83xx_check_driver_presence(vha) != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0xb05a, |
| "Function=0x%x has been removed from IDC participation.\n", |
| ha->portnum); |
| rval = QLA_FUNCTION_FAILED; |
| goto exit; |
| } |
| |
| qla83xx_reset_ownership(vha); |
| |
| rval = qla83xx_initiating_reset(vha); |
| |
| /* |
| * Perform reset if we are the reset-owner, |
| * else wait till IDC state changes to READY/FAILED. |
| */ |
| if (rval == QLA_SUCCESS) { |
| rval = qla83xx_idc_state_handler(vha); |
| |
| if (rval == QLA_SUCCESS) |
| ha->flags.nic_core_hung = 0; |
| __qla83xx_clear_drv_ack(vha); |
| } |
| |
| exit: |
| qla83xx_idc_unlock(vha, 0); |
| |
| ql_dbg(ql_dbg_p3p, vha, 0xb05b, "Exiting %s.\n", __func__); |
| |
| return rval; |
| } |
| |
| int |
| qla2xxx_mctp_dump(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| int rval = QLA_FUNCTION_FAILED; |
| |
| if (!IS_MCTP_CAPABLE(ha)) { |
| /* This message can be removed from the final version */ |
| ql_log(ql_log_info, vha, 0x506d, |
| "This board is not MCTP capable\n"); |
| return rval; |
| } |
| |
| if (!ha->mctp_dump) { |
| ha->mctp_dump = dma_alloc_coherent(&ha->pdev->dev, |
| MCTP_DUMP_SIZE, &ha->mctp_dump_dma, GFP_KERNEL); |
| |
| if (!ha->mctp_dump) { |
| ql_log(ql_log_warn, vha, 0x506e, |
| "Failed to allocate memory for mctp dump\n"); |
| return rval; |
| } |
| } |
| |
| #define MCTP_DUMP_STR_ADDR 0x00000000 |
| rval = qla2x00_dump_mctp_data(vha, ha->mctp_dump_dma, |
| MCTP_DUMP_STR_ADDR, MCTP_DUMP_SIZE/4); |
| if (rval != QLA_SUCCESS) { |
| ql_log(ql_log_warn, vha, 0x506f, |
| "Failed to capture mctp dump\n"); |
| } else { |
| ql_log(ql_log_info, vha, 0x5070, |
| "Mctp dump capture for host (%ld/%p).\n", |
| vha->host_no, ha->mctp_dump); |
| ha->mctp_dumped = 1; |
| } |
| |
| if (!ha->flags.nic_core_reset_hdlr_active && !ha->portnum) { |
| ha->flags.nic_core_reset_hdlr_active = 1; |
| rval = qla83xx_restart_nic_firmware(vha); |
| if (rval) |
| /* NIC Core reset failed. */ |
| ql_log(ql_log_warn, vha, 0x5071, |
| "Failed to restart nic firmware\n"); |
| else |
| ql_dbg(ql_dbg_p3p, vha, 0xb084, |
| "Restarted NIC firmware successfully.\n"); |
| ha->flags.nic_core_reset_hdlr_active = 0; |
| } |
| |
| return rval; |
| |
| } |
| |
| /* |
| * qla2x00_quiesce_io |
| * Description: This function will block the new I/Os |
| * Its not aborting any I/Os as context |
| * is not destroyed during quiescence |
| * Arguments: scsi_qla_host_t |
| * return : void |
| */ |
| void |
| qla2x00_quiesce_io(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *vp; |
| |
| ql_dbg(ql_dbg_dpc, vha, 0x401d, |
| "Quiescing I/O - ha=%p.\n", ha); |
| |
| atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); |
| if (atomic_read(&vha->loop_state) != LOOP_DOWN) { |
| atomic_set(&vha->loop_state, LOOP_DOWN); |
| qla2x00_mark_all_devices_lost(vha, 0); |
| list_for_each_entry(vp, &ha->vp_list, list) |
| qla2x00_mark_all_devices_lost(vp, 0); |
| } else { |
| if (!atomic_read(&vha->loop_down_timer)) |
| atomic_set(&vha->loop_down_timer, |
| LOOP_DOWN_TIME); |
| } |
| /* Wait for pending cmds to complete */ |
| qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST); |
| } |
| |
| void |
| qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *vp; |
| unsigned long flags; |
| fc_port_t *fcport; |
| u16 i; |
| |
| /* For ISP82XX, driver waits for completion of the commands. |
| * online flag should be set. |
| */ |
| if (!(IS_P3P_TYPE(ha))) |
| vha->flags.online = 0; |
| ha->flags.chip_reset_done = 0; |
| clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); |
| vha->qla_stats.total_isp_aborts++; |
| |
| ql_log(ql_log_info, vha, 0x00af, |
| "Performing ISP error recovery - ha=%p.\n", ha); |
| |
| ha->flags.purge_mbox = 1; |
| /* For ISP82XX, reset_chip is just disabling interrupts. |
| * Driver waits for the completion of the commands. |
| * the interrupts need to be enabled. |
| */ |
| if (!(IS_P3P_TYPE(ha))) |
| ha->isp_ops->reset_chip(vha); |
| |
| ha->link_data_rate = PORT_SPEED_UNKNOWN; |
| SAVE_TOPO(ha); |
| ha->flags.rida_fmt2 = 0; |
| ha->flags.n2n_ae = 0; |
| ha->flags.lip_ae = 0; |
| ha->current_topology = 0; |
| ha->flags.fw_started = 0; |
| ha->flags.fw_init_done = 0; |
| ha->chip_reset++; |
| ha->base_qpair->chip_reset = ha->chip_reset; |
| for (i = 0; i < ha->max_qpairs; i++) { |
| if (ha->queue_pair_map[i]) |
| ha->queue_pair_map[i]->chip_reset = |
| ha->base_qpair->chip_reset; |
| } |
| |
| /* purge MBox commands */ |
| if (atomic_read(&ha->num_pend_mbx_stage3)) { |
| clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); |
| complete(&ha->mbx_intr_comp); |
| } |
| |
| i = 0; |
| while (atomic_read(&ha->num_pend_mbx_stage3) || |
| atomic_read(&ha->num_pend_mbx_stage2) || |
| atomic_read(&ha->num_pend_mbx_stage1)) { |
| msleep(20); |
| i++; |
| if (i > 50) |
| break; |
| } |
| ha->flags.purge_mbox = 0; |
| |
| atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); |
| if (atomic_read(&vha->loop_state) != LOOP_DOWN) { |
| atomic_set(&vha->loop_state, LOOP_DOWN); |
| qla2x00_mark_all_devices_lost(vha, 0); |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| list_for_each_entry(vp, &ha->vp_list, list) { |
| atomic_inc(&vp->vref_count); |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| qla2x00_mark_all_devices_lost(vp, 0); |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| atomic_dec(&vp->vref_count); |
| } |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| } else { |
| if (!atomic_read(&vha->loop_down_timer)) |
| atomic_set(&vha->loop_down_timer, |
| LOOP_DOWN_TIME); |
| } |
| |
| /* Clear all async request states across all VPs. */ |
| list_for_each_entry(fcport, &vha->vp_fcports, list) |
| fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| list_for_each_entry(vp, &ha->vp_list, list) { |
| atomic_inc(&vp->vref_count); |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| list_for_each_entry(fcport, &vp->vp_fcports, list) |
| fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| atomic_dec(&vp->vref_count); |
| } |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| if (!ha->flags.eeh_busy) { |
| /* Make sure for ISP 82XX IO DMA is complete */ |
| if (IS_P3P_TYPE(ha)) { |
| qla82xx_chip_reset_cleanup(vha); |
| ql_log(ql_log_info, vha, 0x00b4, |
| "Done chip reset cleanup.\n"); |
| |
| /* Done waiting for pending commands. |
| * Reset the online flag. |
| */ |
| vha->flags.online = 0; |
| } |
| |
| /* Requeue all commands in outstanding command list. */ |
| qla2x00_abort_all_cmds(vha, DID_RESET << 16); |
| } |
| /* memory barrier */ |
| wmb(); |
| } |
| |
| /* |
| * qla2x00_abort_isp |
| * Resets ISP and aborts all outstanding commands. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * 0 = success |
| */ |
| int |
| qla2x00_abort_isp(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint8_t status = 0; |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *vp; |
| struct req_que *req = ha->req_q_map[0]; |
| unsigned long flags; |
| |
| if (vha->flags.online) { |
| qla2x00_abort_isp_cleanup(vha); |
| |
| if (test_and_clear_bit(ISP_ABORT_TO_ROM, &vha->dpc_flags)) { |
| ha->flags.chip_reset_done = 1; |
| vha->flags.online = 1; |
| status = 0; |
| clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| return status; |
| } |
| |
| if (IS_QLA8031(ha)) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb05c, |
| "Clearing fcoe driver presence.\n"); |
| if (qla83xx_clear_drv_presence(vha) != QLA_SUCCESS) |
| ql_dbg(ql_dbg_p3p, vha, 0xb073, |
| "Error while clearing DRV-Presence.\n"); |
| } |
| |
| if (unlikely(pci_channel_offline(ha->pdev) && |
| ha->flags.pci_channel_io_perm_failure)) { |
| clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| status = 0; |
| return status; |
| } |
| |
| switch (vha->qlini_mode) { |
| case QLA2XXX_INI_MODE_DISABLED: |
| if (!qla_tgt_mode_enabled(vha)) |
| return 0; |
| break; |
| case QLA2XXX_INI_MODE_DUAL: |
| if (!qla_dual_mode_enabled(vha)) |
| return 0; |
| break; |
| case QLA2XXX_INI_MODE_ENABLED: |
| default: |
| break; |
| } |
| |
| ha->isp_ops->get_flash_version(vha, req->ring); |
| |
| ha->isp_ops->nvram_config(vha); |
| |
| if (!qla2x00_restart_isp(vha)) { |
| clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| |
| if (!atomic_read(&vha->loop_down_timer)) { |
| /* |
| * Issue marker command only when we are going |
| * to start the I/O . |
| */ |
| vha->marker_needed = 1; |
| } |
| |
| vha->flags.online = 1; |
| |
| ha->isp_ops->enable_intrs(ha); |
| |
| ha->isp_abort_cnt = 0; |
| clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| |
| if (IS_QLA81XX(ha) || IS_QLA8031(ha)) |
| qla2x00_get_fw_version(vha); |
| if (ha->fce) { |
| ha->flags.fce_enabled = 1; |
| memset(ha->fce, 0, |
| fce_calc_size(ha->fce_bufs)); |
| rval = qla2x00_enable_fce_trace(vha, |
| ha->fce_dma, ha->fce_bufs, ha->fce_mb, |
| &ha->fce_bufs); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x8033, |
| "Unable to reinitialize FCE " |
| "(%d).\n", rval); |
| ha->flags.fce_enabled = 0; |
| } |
| } |
| |
| if (ha->eft) { |
| memset(ha->eft, 0, EFT_SIZE); |
| rval = qla2x00_enable_eft_trace(vha, |
| ha->eft_dma, EFT_NUM_BUFFERS); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x8034, |
| "Unable to reinitialize EFT " |
| "(%d).\n", rval); |
| } |
| } |
| } else { /* failed the ISP abort */ |
| vha->flags.online = 1; |
| if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { |
| if (ha->isp_abort_cnt == 0) { |
| ql_log(ql_log_fatal, vha, 0x8035, |
| "ISP error recover failed - " |
| "board disabled.\n"); |
| /* |
| * The next call disables the board |
| * completely. |
| */ |
| qla2x00_abort_isp_cleanup(vha); |
| vha->flags.online = 0; |
| clear_bit(ISP_ABORT_RETRY, |
| &vha->dpc_flags); |
| status = 0; |
| } else { /* schedule another ISP abort */ |
| ha->isp_abort_cnt--; |
| ql_dbg(ql_dbg_taskm, vha, 0x8020, |
| "ISP abort - retry remaining %d.\n", |
| ha->isp_abort_cnt); |
| status = 1; |
| } |
| } else { |
| ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT; |
| ql_dbg(ql_dbg_taskm, vha, 0x8021, |
| "ISP error recovery - retrying (%d) " |
| "more times.\n", ha->isp_abort_cnt); |
| set_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| status = 1; |
| } |
| } |
| |
| } |
| |
| if (!status) { |
| ql_dbg(ql_dbg_taskm, vha, 0x8022, "%s succeeded.\n", __func__); |
| qla2x00_configure_hba(vha); |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| list_for_each_entry(vp, &ha->vp_list, list) { |
| if (vp->vp_idx) { |
| atomic_inc(&vp->vref_count); |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| qla2x00_vp_abort_isp(vp); |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| atomic_dec(&vp->vref_count); |
| } |
| } |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| if (IS_QLA8031(ha)) { |
| ql_dbg(ql_dbg_p3p, vha, 0xb05d, |
| "Setting back fcoe driver presence.\n"); |
| if (qla83xx_set_drv_presence(vha) != QLA_SUCCESS) |
| ql_dbg(ql_dbg_p3p, vha, 0xb074, |
| "Error while setting DRV-Presence.\n"); |
| } |
| } else { |
| ql_log(ql_log_warn, vha, 0x8023, "%s **** FAILED ****.\n", |
| __func__); |
| } |
| |
| return(status); |
| } |
| |
| /* |
| * qla2x00_restart_isp |
| * restarts the ISP after a reset |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * 0 = success |
| */ |
| static int |
| qla2x00_restart_isp(scsi_qla_host_t *vha) |
| { |
| int status = 0; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* If firmware needs to be loaded */ |
| if (qla2x00_isp_firmware(vha)) { |
| vha->flags.online = 0; |
| status = ha->isp_ops->chip_diag(vha); |
| if (!status) |
| status = qla2x00_setup_chip(vha); |
| } |
| |
| if (!status && !(status = qla2x00_init_rings(vha))) { |
| clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| ha->flags.chip_reset_done = 1; |
| |
| /* Initialize the queues in use */ |
| qla25xx_init_queues(ha); |
| |
| status = qla2x00_fw_ready(vha); |
| if (!status) { |
| /* Issue a marker after FW becomes ready. */ |
| qla2x00_marker(vha, ha->base_qpair, 0, 0, MK_SYNC_ALL); |
| set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| } |
| |
| /* if no cable then assume it's good */ |
| if ((vha->device_flags & DFLG_NO_CABLE)) |
| status = 0; |
| } |
| return (status); |
| } |
| |
| static int |
| qla25xx_init_queues(struct qla_hw_data *ha) |
| { |
| struct rsp_que *rsp = NULL; |
| struct req_que *req = NULL; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| int ret = -1; |
| int i; |
| |
| for (i = 1; i < ha->max_rsp_queues; i++) { |
| rsp = ha->rsp_q_map[i]; |
| if (rsp && test_bit(i, ha->rsp_qid_map)) { |
| rsp->options &= ~BIT_0; |
| ret = qla25xx_init_rsp_que(base_vha, rsp); |
| if (ret != QLA_SUCCESS) |
| ql_dbg(ql_dbg_init, base_vha, 0x00ff, |
| "%s Rsp que: %d init failed.\n", |
| __func__, rsp->id); |
| else |
| ql_dbg(ql_dbg_init, base_vha, 0x0100, |
| "%s Rsp que: %d inited.\n", |
| __func__, rsp->id); |
| } |
| } |
| for (i = 1; i < ha->max_req_queues; i++) { |
| req = ha->req_q_map[i]; |
| if (req && test_bit(i, ha->req_qid_map)) { |
| /* Clear outstanding commands array. */ |
| req->options &= ~BIT_0; |
| ret = qla25xx_init_req_que(base_vha, req); |
| if (ret != QLA_SUCCESS) |
| ql_dbg(ql_dbg_init, base_vha, 0x0101, |
| "%s Req que: %d init failed.\n", |
| __func__, req->id); |
| else |
| ql_dbg(ql_dbg_init, base_vha, 0x0102, |
| "%s Req que: %d inited.\n", |
| __func__, req->id); |
| } |
| } |
| return ret; |
| } |
| |
| /* |
| * qla2x00_reset_adapter |
| * Reset adapter. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| */ |
| int |
| qla2x00_reset_adapter(scsi_qla_host_t *vha) |
| { |
| unsigned long flags = 0; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; |
| |
| vha->flags.online = 0; |
| ha->isp_ops->disable_intrs(ha); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); |
| RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); |
| RD_REG_WORD(®->hccr); /* PCI Posting. */ |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return QLA_SUCCESS; |
| } |
| |
| int |
| qla24xx_reset_adapter(scsi_qla_host_t *vha) |
| { |
| unsigned long flags = 0; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; |
| int rval = QLA_SUCCESS; |
| |
| if (IS_P3P_TYPE(ha)) |
| return rval; |
| |
| vha->flags.online = 0; |
| ha->isp_ops->disable_intrs(ha); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET); |
| RD_REG_DWORD(®->hccr); |
| WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); |
| RD_REG_DWORD(®->hccr); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| if (IS_NOPOLLING_TYPE(ha)) |
| ha->isp_ops->enable_intrs(ha); |
| |
| return rval; |
| } |
| |
| /* On sparc systems, obtain port and node WWN from firmware |
| * properties. |
| */ |
| static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *vha, |
| struct nvram_24xx *nv) |
| { |
| #ifdef CONFIG_SPARC |
| struct qla_hw_data *ha = vha->hw; |
| struct pci_dev *pdev = ha->pdev; |
| struct device_node *dp = pci_device_to_OF_node(pdev); |
| const u8 *val; |
| int len; |
| |
| val = of_get_property(dp, "port-wwn", &len); |
| if (val && len >= WWN_SIZE) |
| memcpy(nv->port_name, val, WWN_SIZE); |
| |
| val = of_get_property(dp, "node-wwn", &len); |
| if (val && len >= WWN_SIZE) |
| memcpy(nv->node_name, val, WWN_SIZE); |
| #endif |
| } |
| |
| int |
| qla24xx_nvram_config(scsi_qla_host_t *vha) |
| { |
| int rval; |
| struct init_cb_24xx *icb; |
| struct nvram_24xx *nv; |
| uint32_t *dptr; |
| uint8_t *dptr1, *dptr2; |
| uint32_t chksum; |
| uint16_t cnt; |
| struct qla_hw_data *ha = vha->hw; |
| |
| rval = QLA_SUCCESS; |
| icb = (struct init_cb_24xx *)ha->init_cb; |
| nv = ha->nvram; |
| |
| /* Determine NVRAM starting address. */ |
| if (ha->port_no == 0) { |
| ha->nvram_base = FA_NVRAM_FUNC0_ADDR; |
| ha->vpd_base = FA_NVRAM_VPD0_ADDR; |
| } else { |
| ha->nvram_base = FA_NVRAM_FUNC1_ADDR; |
| ha->vpd_base = FA_NVRAM_VPD1_ADDR; |
| } |
| |
| ha->nvram_size = sizeof(*nv); |
| ha->vpd_size = FA_NVRAM_VPD_SIZE; |
| |
| /* Get VPD data into cache */ |
| ha->vpd = ha->nvram + VPD_OFFSET; |
| ha->isp_ops->read_nvram(vha, ha->vpd, |
| ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4); |
| |
| /* Get NVRAM data into cache and calculate checksum. */ |
| dptr = (uint32_t *)nv; |
| ha->isp_ops->read_nvram(vha, dptr, ha->nvram_base, ha->nvram_size); |
| for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++, dptr++) |
| chksum += le32_to_cpu(*dptr); |
| |
| ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x006a, |
| "Contents of NVRAM\n"); |
| ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010d, |
| nv, ha->nvram_size); |
| |
| /* Bad NVRAM data, set defaults parameters. */ |
| if (chksum || memcmp("ISP ", nv->id, sizeof(nv->id)) || |
| le16_to_cpu(nv->nvram_version) < ICB_VERSION) { |
| /* Reset NVRAM data. */ |
| ql_log(ql_log_warn, vha, 0x006b, |
| "Inconsistent NVRAM checksum=%#x id=%.4s version=%#x.\n", |
| chksum, nv->id, nv->nvram_version); |
| ql_dump_buffer(ql_dbg_init, vha, 0x006b, nv, sizeof(*nv)); |
| ql_log(ql_log_warn, vha, 0x006c, |
| "Falling back to functioning (yet invalid -- WWPN) " |
| "defaults.\n"); |
| |
| /* |
| * Set default initialization control block. |
| */ |
| memset(nv, 0, ha->nvram_size); |
| nv->nvram_version = cpu_to_le16(ICB_VERSION); |
| nv->version = cpu_to_le16(ICB_VERSION); |
| nv->frame_payload_size = 2048; |
| nv->execution_throttle = cpu_to_le16(0xFFFF); |
| nv->exchange_count = cpu_to_le16(0); |
| nv->hard_address = cpu_to_le16(124); |
| nv->port_name[0] = 0x21; |
| nv->port_name[1] = 0x00 + ha->port_no + 1; |
| nv->port_name[2] = 0x00; |
| nv->port_name[3] = 0xe0; |
| nv->port_name[4] = 0x8b; |
| nv->port_name[5] = 0x1c; |
| nv->port_name[6] = 0x55; |
| nv->port_name[7] = 0x86; |
| nv->node_name[0] = 0x20; |
| nv->node_name[1] = 0x00; |
| nv->node_name[2] = 0x00; |
| nv->node_name[3] = 0xe0; |
| nv->node_name[4] = 0x8b; |
| nv->node_name[5] = 0x1c; |
| nv->node_name[6] = 0x55; |
| nv->node_name[7] = 0x86; |
| qla24xx_nvram_wwn_from_ofw(vha, nv); |
| nv->login_retry_count = cpu_to_le16(8); |
| nv->interrupt_delay_timer = cpu_to_le16(0); |
| nv->login_timeout = cpu_to_le16(0); |
| nv->firmware_options_1 = |
| cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1); |
| nv->firmware_options_2 = cpu_to_le32(2 << 4); |
| nv->firmware_options_2 |= cpu_to_le32(BIT_12); |
| nv->firmware_options_3 = cpu_to_le32(2 << 13); |
| nv->host_p = cpu_to_le32(BIT_11|BIT_10); |
| nv->efi_parameters = cpu_to_le32(0); |
| nv->reset_delay = 5; |
| nv->max_luns_per_target = cpu_to_le16(128); |
| nv->port_down_retry_count = cpu_to_le16(30); |
| nv->link_down_timeout = cpu_to_le16(30); |
| |
| rval = 1; |
| } |
| |
| if (qla_tgt_mode_enabled(vha)) { |
| /* Don't enable full login after initial LIP */ |
| nv->firmware_options_1 &= cpu_to_le32(~BIT_13); |
| /* Don't enable LIP full login for initiator */ |
| nv->host_p &= cpu_to_le32(~BIT_10); |
| } |
| |
| qlt_24xx_config_nvram_stage1(vha, nv); |
| |
| /* Reset Initialization control block */ |
| memset(icb, 0, ha->init_cb_size); |
| |
| /* Copy 1st segment. */ |
| dptr1 = (uint8_t *)icb; |
| dptr2 = (uint8_t *)&nv->version; |
| cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version; |
| while (cnt--) |
| *dptr1++ = *dptr2++; |
| |
| icb->login_retry_count = nv->login_retry_count; |
| icb->link_down_on_nos = nv->link_down_on_nos; |
| |
| /* Copy 2nd segment. */ |
| dptr1 = (uint8_t *)&icb->interrupt_delay_timer; |
| dptr2 = (uint8_t *)&nv->interrupt_delay_timer; |
| cnt = (uint8_t *)&icb->reserved_3 - |
| (uint8_t *)&icb->interrupt_delay_timer; |
| while (cnt--) |
| *dptr1++ = *dptr2++; |
| ha->frame_payload_size = le16_to_cpu(icb->frame_payload_size); |
| /* |
| * Setup driver NVRAM options. |
| */ |
| qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name), |
| "QLA2462"); |
| |
| qlt_24xx_config_nvram_stage2(vha, icb); |
| |
| if (nv->host_p & cpu_to_le32(BIT_15)) { |
| /* Use alternate WWN? */ |
| memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE); |
| memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE); |
| } |
| |
| /* Prepare nodename */ |
| if ((icb->firmware_options_1 & cpu_to_le32(BIT_14)) == 0) { |
| /* |
| * Firmware will apply the following mask if the nodename was |
| * not provided. |
| */ |
| memcpy(icb->node_name, icb->port_name, WWN_SIZE); |
| icb->node_name[0] &= 0xF0; |
| } |
| |
| /* Set host adapter parameters. */ |
| ha->flags.disable_risc_code_load = 0; |
| ha->flags.enable_lip_reset = 0; |
| ha->flags.enable_lip_full_login = |
| le32_to_cpu(nv->host_p) & BIT_10 ? 1 : 0; |
| ha->flags.enable_target_reset = |
| le32_to_cpu(nv->host_p) & BIT_11 ? 1 : 0; |
| ha->flags.enable_led_scheme = 0; |
| ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1 : 0; |
| |
| ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) & |
| (BIT_6 | BIT_5 | BIT_4)) >> 4; |
| |
| memcpy(ha->fw_seriallink_options24, nv->seriallink_options, |
| sizeof(ha->fw_seriallink_options24)); |
| |
| /* save HBA serial number */ |
| ha->serial0 = icb->port_name[5]; |
| ha->serial1 = icb->port_name[6]; |
| ha->serial2 = icb->port_name[7]; |
| memcpy(vha->node_name, icb->node_name, WWN_SIZE); |
| memcpy(vha->port_name, icb->port_name, WWN_SIZE); |
| |
| icb->execution_throttle = cpu_to_le16(0xFFFF); |
| |
| ha->retry_count = le16_to_cpu(nv->login_retry_count); |
| |
| /* Set minimum login_timeout to 4 seconds. */ |
| if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout) |
| nv->login_timeout = cpu_to_le16(ql2xlogintimeout); |
| if (le16_to_cpu(nv->login_timeout) < 4) |
| nv->login_timeout = cpu_to_le16(4); |
| ha->login_timeout = le16_to_cpu(nv->login_timeout); |
| |
| /* Set minimum RATOV to 100 tenths of a second. */ |
| ha->r_a_tov = 100; |
| |
| ha->loop_reset_delay = nv->reset_delay; |
| |
| /* Link Down Timeout = 0: |
| * |
| * When Port Down timer expires we will start returning |
| * I/O's to OS with "DID_NO_CONNECT". |
| * |
| * Link Down Timeout != 0: |
| * |
| * The driver waits for the link to come up after link down |
| * before returning I/Os to OS with "DID_NO_CONNECT". |
| */ |
| if (le16_to_cpu(nv->link_down_timeout) == 0) { |
| ha->loop_down_abort_time = |
| (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); |
| } else { |
| ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout); |
| ha->loop_down_abort_time = |
| (LOOP_DOWN_TIME - ha->link_down_timeout); |
| } |
| |
| /* Need enough time to try and get the port back. */ |
| ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count); |
| if (qlport_down_retry) |
| ha->port_down_retry_count = qlport_down_retry; |
| |
| /* Set login_retry_count */ |
| ha->login_retry_count = le16_to_cpu(nv->login_retry_count); |
| if (ha->port_down_retry_count == |
| le16_to_cpu(nv->port_down_retry_count) && |
| ha->port_down_retry_count > 3) |
| ha->login_retry_count = ha->port_down_retry_count; |
| else if (ha->port_down_retry_count > (int)ha->login_retry_count) |
| ha->login_retry_count = ha->port_down_retry_count; |
| if (ql2xloginretrycount) |
| ha->login_retry_count = ql2xloginretrycount; |
| |
| /* N2N: driver will initiate Login instead of FW */ |
| icb->firmware_options_3 |= BIT_8; |
| |
| /* Enable ZIO. */ |
| if (!vha->flags.init_done) { |
| ha->zio_mode = le32_to_cpu(icb->firmware_options_2) & |
| (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ? |
| le16_to_cpu(icb->interrupt_delay_timer) : 2; |
| } |
| icb->firmware_options_2 &= cpu_to_le32( |
| ~(BIT_3 | BIT_2 | BIT_1 | BIT_0)); |
| if (ha->zio_mode != QLA_ZIO_DISABLED) { |
| ha->zio_mode = QLA_ZIO_MODE_6; |
| |
| ql_log(ql_log_info, vha, 0x006f, |
| "ZIO mode %d enabled; timer delay (%d us).\n", |
| ha->zio_mode, ha->zio_timer * 100); |
| |
| icb->firmware_options_2 |= cpu_to_le32( |
| (uint32_t)ha->zio_mode); |
| icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer); |
| } |
| |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x0070, |
| "NVRAM configuration failed.\n"); |
| } |
| return (rval); |
| } |
| |
| static void |
| qla27xx_print_image(struct scsi_qla_host *vha, char *name, |
| struct qla27xx_image_status *image_status) |
| { |
| ql_dbg(ql_dbg_init, vha, 0x018b, |
| "%s %s: mask=%#02x gen=%#04x ver=%u.%u map=%#01x sum=%#08x sig=%#08x\n", |
| name, "status", |
| image_status->image_status_mask, |
| le16_to_cpu(image_status->generation), |
| image_status->ver_major, |
| image_status->ver_minor, |
| image_status->bitmap, |
| le32_to_cpu(image_status->checksum), |
| le32_to_cpu(image_status->signature)); |
| } |
| |
| static bool |
| qla28xx_check_aux_image_status_signature( |
| struct qla27xx_image_status *image_status) |
| { |
| ulong signature = le32_to_cpu(image_status->signature); |
| |
| return signature != QLA28XX_AUX_IMG_STATUS_SIGN; |
| } |
| |
| static bool |
| qla27xx_check_image_status_signature(struct qla27xx_image_status *image_status) |
| { |
| ulong signature = le32_to_cpu(image_status->signature); |
| |
| return |
| signature != QLA27XX_IMG_STATUS_SIGN && |
| signature != QLA28XX_IMG_STATUS_SIGN; |
| } |
| |
| static ulong |
| qla27xx_image_status_checksum(struct qla27xx_image_status *image_status) |
| { |
| uint32_t *p = (void *)image_status; |
| uint n = sizeof(*image_status) / sizeof(*p); |
| uint32_t sum = 0; |
| |
| for ( ; n--; p++) |
| sum += le32_to_cpup(p); |
| |
| return sum; |
| } |
| |
| static inline uint |
| qla28xx_component_bitmask(struct qla27xx_image_status *aux, uint bitmask) |
| { |
| return aux->bitmap & bitmask ? |
| QLA27XX_SECONDARY_IMAGE : QLA27XX_PRIMARY_IMAGE; |
| } |
| |
| static void |
| qla28xx_component_status( |
| struct active_regions *active_regions, struct qla27xx_image_status *aux) |
| { |
| active_regions->aux.board_config = |
| qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_BOARD_CONFIG); |
| |
| active_regions->aux.vpd_nvram = |
| qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_VPD_NVRAM); |
| |
| active_regions->aux.npiv_config_0_1 = |
| qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_NPIV_CONFIG_0_1); |
| |
| active_regions->aux.npiv_config_2_3 = |
| qla28xx_component_bitmask(aux, QLA28XX_AUX_IMG_NPIV_CONFIG_2_3); |
| } |
| |
| static int |
| qla27xx_compare_image_generation( |
| struct qla27xx_image_status *pri_image_status, |
| struct qla27xx_image_status *sec_image_status) |
| { |
| /* calculate generation delta as uint16 (this accounts for wrap) */ |
| int16_t delta = |
| le16_to_cpu(pri_image_status->generation) - |
| le16_to_cpu(sec_image_status->generation); |
| |
| ql_dbg(ql_dbg_init, NULL, 0x0180, "generation delta = %d\n", delta); |
| |
| return delta; |
| } |
| |
| void |
| qla28xx_get_aux_images( |
| struct scsi_qla_host *vha, struct active_regions *active_regions) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| struct qla27xx_image_status pri_aux_image_status, sec_aux_image_status; |
| bool valid_pri_image = false, valid_sec_image = false; |
| bool active_pri_image = false, active_sec_image = false; |
| |
| if (!ha->flt_region_aux_img_status_pri) { |
| ql_dbg(ql_dbg_init, vha, 0x018a, "Primary aux image not addressed\n"); |
| goto check_sec_image; |
| } |
| |
| qla24xx_read_flash_data(vha, (void *)&pri_aux_image_status, |
| ha->flt_region_aux_img_status_pri, |
| sizeof(pri_aux_image_status) >> 2); |
| qla27xx_print_image(vha, "Primary aux image", &pri_aux_image_status); |
| |
| if (qla28xx_check_aux_image_status_signature(&pri_aux_image_status)) { |
| ql_dbg(ql_dbg_init, vha, 0x018b, |
| "Primary aux image signature (%#x) not valid\n", |
| le32_to_cpu(pri_aux_image_status.signature)); |
| goto check_sec_image; |
| } |
| |
| if (qla27xx_image_status_checksum(&pri_aux_image_status)) { |
| ql_dbg(ql_dbg_init, vha, 0x018c, |
| "Primary aux image checksum failed\n"); |
| goto check_sec_image; |
| } |
| |
| valid_pri_image = true; |
| |
| if (pri_aux_image_status.image_status_mask & 1) { |
| ql_dbg(ql_dbg_init, vha, 0x018d, |
| "Primary aux image is active\n"); |
| active_pri_image = true; |
| } |
| |
| check_sec_image: |
| if (!ha->flt_region_aux_img_status_sec) { |
| ql_dbg(ql_dbg_init, vha, 0x018a, |
| "Secondary aux image not addressed\n"); |
| goto check_valid_image; |
| } |
| |
| qla24xx_read_flash_data(vha, (void *)&sec_aux_image_status, |
| ha->flt_region_aux_img_status_sec, |
| sizeof(sec_aux_image_status) >> 2); |
| qla27xx_print_image(vha, "Secondary aux image", &sec_aux_image_status); |
| |
| if (qla28xx_check_aux_image_status_signature(&sec_aux_image_status)) { |
| ql_dbg(ql_dbg_init, vha, 0x018b, |
| "Secondary aux image signature (%#x) not valid\n", |
| le32_to_cpu(sec_aux_image_status.signature)); |
| goto check_valid_image; |
| } |
| |
| if (qla27xx_image_status_checksum(&sec_aux_image_status)) { |
| ql_dbg(ql_dbg_init, vha, 0x018c, |
| "Secondary aux image checksum failed\n"); |
| goto check_valid_image; |
| } |
| |
| valid_sec_image = true; |
| |
| if (sec_aux_image_status.image_status_mask & 1) { |
| ql_dbg(ql_dbg_init, vha, 0x018d, |
| "Secondary aux image is active\n"); |
| active_sec_image = true; |
| } |
| |
| check_valid_image: |
| if (valid_pri_image && active_pri_image && |
| valid_sec_image && active_sec_image) { |
| if (qla27xx_compare_image_generation(&pri_aux_image_status, |
| &sec_aux_image_status) >= 0) { |
| qla28xx_component_status(active_regions, |
| &pri_aux_image_status); |
| } else { |
| qla28xx_component_status(active_regions, |
| &sec_aux_image_status); |
| } |
| } else if (valid_pri_image && active_pri_image) { |
| qla28xx_component_status(active_regions, &pri_aux_image_status); |
| } else if (valid_sec_image && active_sec_image) { |
| qla28xx_component_status(active_regions, &sec_aux_image_status); |
| } |
| |
| ql_dbg(ql_dbg_init, vha, 0x018f, |
| "aux images active: BCFG=%u VPD/NVR=%u NPIV0/1=%u NPIV2/3=%u\n", |
| active_regions->aux.board_config, |
| active_regions->aux.vpd_nvram, |
| active_regions->aux.npiv_config_0_1, |
| active_regions->aux.npiv_config_2_3); |
| } |
| |
| void |
| qla27xx_get_active_image(struct scsi_qla_host *vha, |
| struct active_regions *active_regions) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| struct qla27xx_image_status pri_image_status, sec_image_status; |
| bool valid_pri_image = false, valid_sec_image = false; |
| bool active_pri_image = false, active_sec_image = false; |
| |
| if (!ha->flt_region_img_status_pri) { |
| ql_dbg(ql_dbg_init, vha, 0x018a, "Primary image not addressed\n"); |
| goto check_sec_image; |
| } |
| |
| qla24xx_read_flash_data(vha, (void *)(&pri_image_status), |
| ha->flt_region_img_status_pri, sizeof(pri_image_status) >> 2); |
| qla27xx_print_image(vha, "Primary image", &pri_image_status); |
| |
| if (qla27xx_check_image_status_signature(&pri_image_status)) { |
| ql_dbg(ql_dbg_init, vha, 0x018b, |
| "Primary image signature (%#x) not valid\n", |
| le32_to_cpu(pri_image_status.signature)); |
| goto check_sec_image; |
| } |
| |
| if (qla27xx_image_status_checksum(&pri_image_status)) { |
| ql_dbg(ql_dbg_init, vha, 0x018c, |
| "Primary image checksum failed\n"); |
| goto check_sec_image; |
| } |
| |
| valid_pri_image = true; |
| |
| if (pri_image_status.image_status_mask & 1) { |
| ql_dbg(ql_dbg_init, vha, 0x018d, |
| "Primary image is active\n"); |
| active_pri_image = true; |
| } |
| |
| check_sec_image: |
| if (!ha->flt_region_img_status_sec) { |
| ql_dbg(ql_dbg_init, vha, 0x018a, "Secondary image not addressed\n"); |
| goto check_valid_image; |
| } |
| |
| qla24xx_read_flash_data(vha, (uint32_t *)(&sec_image_status), |
| ha->flt_region_img_status_sec, sizeof(sec_image_status) >> 2); |
| qla27xx_print_image(vha, "Secondary image", &sec_image_status); |
| |
| if (qla27xx_check_image_status_signature(&sec_image_status)) { |
| ql_dbg(ql_dbg_init, vha, 0x018b, |
| "Secondary image signature (%#x) not valid\n", |
| le32_to_cpu(sec_image_status.signature)); |
| goto check_valid_image; |
| } |
| |
| if (qla27xx_image_status_checksum(&sec_image_status)) { |
| ql_dbg(ql_dbg_init, vha, 0x018c, |
| "Secondary image checksum failed\n"); |
| goto check_valid_image; |
| } |
| |
| valid_sec_image = true; |
| |
| if (sec_image_status.image_status_mask & 1) { |
| ql_dbg(ql_dbg_init, vha, 0x018d, |
| "Secondary image is active\n"); |
| active_sec_image = true; |
| } |
| |
| check_valid_image: |
| if (valid_pri_image && active_pri_image) |
| active_regions->global = QLA27XX_PRIMARY_IMAGE; |
| |
| if (valid_sec_image && active_sec_image) { |
| if (!active_regions->global || |
| qla27xx_compare_image_generation( |
| &pri_image_status, &sec_image_status) < 0) { |
| active_regions->global = QLA27XX_SECONDARY_IMAGE; |
| } |
| } |
| |
| ql_dbg(ql_dbg_init, vha, 0x018f, "active image %s (%u)\n", |
| active_regions->global == QLA27XX_DEFAULT_IMAGE ? |
| "default (boot/fw)" : |
| active_regions->global == QLA27XX_PRIMARY_IMAGE ? |
| "primary" : |
| active_regions->global == QLA27XX_SECONDARY_IMAGE ? |
| "secondary" : "invalid", |
| active_regions->global); |
| } |
| |
| bool qla24xx_risc_firmware_invalid(uint32_t *dword) |
| { |
| return |
| !(dword[4] | dword[5] | dword[6] | dword[7]) || |
| !(~dword[4] | ~dword[5] | ~dword[6] | ~dword[7]); |
| } |
| |
| static int |
| qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr, |
| uint32_t faddr) |
| { |
| int rval; |
| uint templates, segments, fragment; |
| ulong i; |
| uint j; |
| ulong dlen; |
| uint32_t *dcode; |
| uint32_t risc_addr, risc_size, risc_attr = 0; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| struct fwdt *fwdt = ha->fwdt; |
| |
| ql_dbg(ql_dbg_init, vha, 0x008b, |
| "FW: Loading firmware from flash (%x).\n", faddr); |
| |
| dcode = (void *)req->ring; |
| qla24xx_read_flash_data(vha, dcode, faddr, 8); |
| if (qla24xx_risc_firmware_invalid(dcode)) { |
| ql_log(ql_log_fatal, vha, 0x008c, |
| "Unable to verify the integrity of flash firmware " |
| "image.\n"); |
| ql_log(ql_log_fatal, vha, 0x008d, |
| "Firmware data: %08x %08x %08x %08x.\n", |
| dcode[0], dcode[1], dcode[2], dcode[3]); |
| |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| dcode = (void *)req->ring; |
| *srisc_addr = 0; |
| segments = FA_RISC_CODE_SEGMENTS; |
| for (j = 0; j < segments; j++) { |
| ql_dbg(ql_dbg_init, vha, 0x008d, |
| "-> Loading segment %u...\n", j); |
| qla24xx_read_flash_data(vha, dcode, faddr, 10); |
| risc_addr = be32_to_cpu(dcode[2]); |
| risc_size = be32_to_cpu(dcode[3]); |
| if (!*srisc_addr) { |
| *srisc_addr = risc_addr; |
| risc_attr = be32_to_cpu(dcode[9]); |
| } |
| |
| dlen = ha->fw_transfer_size >> 2; |
| for (fragment = 0; risc_size; fragment++) { |
| if (dlen > risc_size) |
| dlen = risc_size; |
| |
| ql_dbg(ql_dbg_init, vha, 0x008e, |
| "-> Loading fragment %u: %#x <- %#x (%#lx dwords)...\n", |
| fragment, risc_addr, faddr, dlen); |
| qla24xx_read_flash_data(vha, dcode, faddr, dlen); |
| for (i = 0; i < dlen; i++) |
| dcode[i] = swab32(dcode[i]); |
| |
| rval = qla2x00_load_ram(vha, req->dma, risc_addr, dlen); |
| if (rval) { |
| ql_log(ql_log_fatal, vha, 0x008f, |
| "-> Failed load firmware fragment %u.\n", |
| fragment); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| faddr += dlen; |
| risc_addr += dlen; |
| risc_size -= dlen; |
| } |
| } |
| |
| if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha)) |
| return QLA_SUCCESS; |
| |
| templates = (risc_attr & BIT_9) ? 2 : 1; |
| ql_dbg(ql_dbg_init, vha, 0x0160, "-> templates = %u\n", templates); |
| for (j = 0; j < templates; j++, fwdt++) { |
| if (fwdt->template) |
| vfree(fwdt->template); |
| fwdt->template = NULL; |
| fwdt->length = 0; |
| |
| dcode = (void *)req->ring; |
| qla24xx_read_flash_data(vha, dcode, faddr, 7); |
| risc_size = be32_to_cpu(dcode[2]); |
| ql_dbg(ql_dbg_init, vha, 0x0161, |
| "-> fwdt%u template array at %#x (%#x dwords)\n", |
| j, faddr, risc_size); |
| if (!risc_size || !~risc_size) { |
| ql_dbg(ql_dbg_init, vha, 0x0162, |
| "-> fwdt%u failed to read array\n", j); |
| goto failed; |
| } |
| |
| /* skip header and ignore checksum */ |
| faddr += 7; |
| risc_size -= 8; |
| |
| ql_dbg(ql_dbg_init, vha, 0x0163, |
| "-> fwdt%u template allocate template %#x words...\n", |
| j, risc_size); |
| fwdt->template = vmalloc(risc_size * sizeof(*dcode)); |
| if (!fwdt->template) { |
| ql_log(ql_log_warn, vha, 0x0164, |
| "-> fwdt%u failed allocate template.\n", j); |
| goto failed; |
| } |
| |
| dcode = fwdt->template; |
| qla24xx_read_flash_data(vha, dcode, faddr, risc_size); |
| |
| if (!qla27xx_fwdt_template_valid(dcode)) { |
| ql_log(ql_log_warn, vha, 0x0165, |
| "-> fwdt%u failed template validate\n", j); |
| goto failed; |
| } |
| |
| dlen = qla27xx_fwdt_template_size(dcode); |
| ql_dbg(ql_dbg_init, vha, 0x0166, |
| "-> fwdt%u template size %#lx bytes (%#lx words)\n", |
| j, dlen, dlen / sizeof(*dcode)); |
| if (dlen > risc_size * sizeof(*dcode)) { |
| ql_log(ql_log_warn, vha, 0x0167, |
| "-> fwdt%u template exceeds array (%-lu bytes)\n", |
| j, dlen - risc_size * sizeof(*dcode)); |
| goto failed; |
| } |
| |
| fwdt->length = dlen; |
| ql_dbg(ql_dbg_init, vha, 0x0168, |
| "-> fwdt%u loaded template ok\n", j); |
| |
| faddr += risc_size + 1; |
| } |
| |
| return QLA_SUCCESS; |
| |
| failed: |
| if (fwdt->template) |
| vfree(fwdt->template); |
| fwdt->template = NULL; |
| fwdt->length = 0; |
| |
| return QLA_SUCCESS; |
| } |
| |
| #define QLA_FW_URL "http://ldriver.qlogic.com/firmware/" |
| |
| int |
| qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) |
| { |
| int rval; |
| int i, fragment; |
| uint16_t *wcode, *fwcode; |
| uint32_t risc_addr, risc_size, fwclen, wlen, *seg; |
| struct fw_blob *blob; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| |
| /* Load firmware blob. */ |
| blob = qla2x00_request_firmware(vha); |
| if (!blob) { |
| ql_log(ql_log_info, vha, 0x0083, |
| "Firmware image unavailable.\n"); |
| ql_log(ql_log_info, vha, 0x0084, |
| "Firmware images can be retrieved from: "QLA_FW_URL ".\n"); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| rval = QLA_SUCCESS; |
| |
| wcode = (uint16_t *)req->ring; |
| *srisc_addr = 0; |
| fwcode = (uint16_t *)blob->fw->data; |
| fwclen = 0; |
| |
| /* Validate firmware image by checking version. */ |
| if (blob->fw->size < 8 * sizeof(uint16_t)) { |
| ql_log(ql_log_fatal, vha, 0x0085, |
| "Unable to verify integrity of firmware image (%zd).\n", |
| blob->fw->size); |
| goto fail_fw_integrity; |
| } |
| for (i = 0; i < 4; i++) |
| wcode[i] = be16_to_cpu(fwcode[i + 4]); |
| if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff && |
| wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 && |
| wcode[2] == 0 && wcode[3] == 0)) { |
| ql_log(ql_log_fatal, vha, 0x0086, |
| "Unable to verify integrity of firmware image.\n"); |
| ql_log(ql_log_fatal, vha, 0x0087, |
| "Firmware data: %04x %04x %04x %04x.\n", |
| wcode[0], wcode[1], wcode[2], wcode[3]); |
| goto fail_fw_integrity; |
| } |
| |
| seg = blob->segs; |
| while (*seg && rval == QLA_SUCCESS) { |
| risc_addr = *seg; |
| *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr; |
| risc_size = be16_to_cpu(fwcode[3]); |
| |
| /* Validate firmware image size. */ |
| fwclen += risc_size * sizeof(uint16_t); |
| if (blob->fw->size < fwclen) { |
| ql_log(ql_log_fatal, vha, 0x0088, |
| "Unable to verify integrity of firmware image " |
| "(%zd).\n", blob->fw->size); |
| goto fail_fw_integrity; |
| } |
| |
| fragment = 0; |
| while (risc_size > 0 && rval == QLA_SUCCESS) { |
| wlen = (uint16_t)(ha->fw_transfer_size >> 1); |
| if (wlen > risc_size) |
| wlen = risc_size; |
| ql_dbg(ql_dbg_init, vha, 0x0089, |
| "Loading risc segment@ risc addr %x number of " |
| "words 0x%x.\n", risc_addr, wlen); |
| |
| for (i = 0; i < wlen; i++) |
| wcode[i] = swab16(fwcode[i]); |
| |
| rval = qla2x00_load_ram(vha, req->dma, risc_addr, |
| wlen); |
| if (rval) { |
| ql_log(ql_log_fatal, vha, 0x008a, |
| "Failed to load segment %d of firmware.\n", |
| fragment); |
| break; |
| } |
| |
| fwcode += wlen; |
| risc_addr += wlen; |
| risc_size -= wlen; |
| fragment++; |
| } |
| |
| /* Next segment. */ |
| seg++; |
| } |
| return rval; |
| |
| fail_fw_integrity: |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| static int |
| qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr) |
| { |
| int rval; |
| uint templates, segments, fragment; |
| uint32_t *dcode; |
| ulong dlen; |
| uint32_t risc_addr, risc_size, risc_attr = 0; |
| ulong i; |
| uint j; |
| struct fw_blob *blob; |
| uint32_t *fwcode; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| struct fwdt *fwdt = ha->fwdt; |
| |
| ql_dbg(ql_dbg_init, vha, 0x0090, |
| "-> FW: Loading via request-firmware.\n"); |
| |
| blob = qla2x00_request_firmware(vha); |
| if (!blob) { |
| ql_log(ql_log_warn, vha, 0x0092, |
| "-> Firmware file not found.\n"); |
| |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| fwcode = (void *)blob->fw->data; |
| dcode = fwcode; |
| if (qla24xx_risc_firmware_invalid(dcode)) { |
| ql_log(ql_log_fatal, vha, 0x0093, |
| "Unable to verify integrity of firmware image (%zd).\n", |
| blob->fw->size); |
| ql_log(ql_log_fatal, vha, 0x0095, |
| "Firmware data: %08x %08x %08x %08x.\n", |
| dcode[0], dcode[1], dcode[2], dcode[3]); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| dcode = (void *)req->ring; |
| *srisc_addr = 0; |
| segments = FA_RISC_CODE_SEGMENTS; |
| for (j = 0; j < segments; j++) { |
| ql_dbg(ql_dbg_init, vha, 0x0096, |
| "-> Loading segment %u...\n", j); |
| risc_addr = be32_to_cpu(fwcode[2]); |
| risc_size = be32_to_cpu(fwcode[3]); |
| |
| if (!*srisc_addr) { |
| *srisc_addr = risc_addr; |
| risc_attr = be32_to_cpu(fwcode[9]); |
| } |
| |
| dlen = ha->fw_transfer_size >> 2; |
| for (fragment = 0; risc_size; fragment++) { |
| if (dlen > risc_size) |
| dlen = risc_size; |
| |
| ql_dbg(ql_dbg_init, vha, 0x0097, |
| "-> Loading fragment %u: %#x <- %#x (%#lx words)...\n", |
| fragment, risc_addr, |
| (uint32_t)(fwcode - (typeof(fwcode))blob->fw->data), |
| dlen); |
| |
| for (i = 0; i < dlen; i++) |
| dcode[i] = swab32(fwcode[i]); |
| |
| rval = qla2x00_load_ram(vha, req->dma, risc_addr, dlen); |
| if (rval) { |
| ql_log(ql_log_fatal, vha, 0x0098, |
| "-> Failed load firmware fragment %u.\n", |
| fragment); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| fwcode += dlen; |
| risc_addr += dlen; |
| risc_size -= dlen; |
| } |
| } |
| |
| if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha)) |
| return QLA_SUCCESS; |
| |
| templates = (risc_attr & BIT_9) ? 2 : 1; |
| ql_dbg(ql_dbg_init, vha, 0x0170, "-> templates = %u\n", templates); |
| for (j = 0; j < templates; j++, fwdt++) { |
| if (fwdt->template) |
| vfree(fwdt->template); |
| fwdt->template = NULL; |
| fwdt->length = 0; |
| |
| risc_size = be32_to_cpu(fwcode[2]); |
| ql_dbg(ql_dbg_init, vha, 0x0171, |
| "-> fwdt%u template array at %#x (%#x dwords)\n", |
| j, (uint32_t)((void *)fwcode - (void *)blob->fw->data), |
| risc_size); |
| if (!risc_size || !~risc_size) { |
| ql_dbg(ql_dbg_init, vha, 0x0172, |
| "-> fwdt%u failed to read array\n", j); |
| goto failed; |
| } |
| |
| /* skip header and ignore checksum */ |
| fwcode += 7; |
| risc_size -= 8; |
| |
| ql_dbg(ql_dbg_init, vha, 0x0173, |
| "-> fwdt%u template allocate template %#x words...\n", |
| j, risc_size); |
| fwdt->template = vmalloc(risc_size * sizeof(*dcode)); |
| if (!fwdt->template) { |
| ql_log(ql_log_warn, vha, 0x0174, |
| "-> fwdt%u failed allocate template.\n", j); |
| goto failed; |
| } |
| |
| dcode = fwdt->template; |
| for (i = 0; i < risc_size; i++) |
| dcode[i] = fwcode[i]; |
| |
| if (!qla27xx_fwdt_template_valid(dcode)) { |
| ql_log(ql_log_warn, vha, 0x0175, |
| "-> fwdt%u failed template validate\n", j); |
| goto failed; |
| } |
| |
| dlen = qla27xx_fwdt_template_size(dcode); |
| ql_dbg(ql_dbg_init, vha, 0x0176, |
| "-> fwdt%u template size %#lx bytes (%#lx words)\n", |
| j, dlen, dlen / sizeof(*dcode)); |
| if (dlen > risc_size * sizeof(*dcode)) { |
| ql_log(ql_log_warn, vha, 0x0177, |
| "-> fwdt%u template exceeds array (%-lu bytes)\n", |
| j, dlen - risc_size * sizeof(*dcode)); |
| goto failed; |
| } |
| |
| fwdt->length = dlen; |
| ql_dbg(ql_dbg_init, vha, 0x0178, |
| "-> fwdt%u loaded template ok\n", j); |
| |
| fwcode += risc_size + 1; |
| } |
| |
| return QLA_SUCCESS; |
| |
| failed: |
| if (fwdt->template) |
| vfree(fwdt->template); |
| fwdt->template = NULL; |
| fwdt->length = 0; |
| |
| return QLA_SUCCESS; |
| } |
| |
| int |
| qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) |
| { |
| int rval; |
| |
| if (ql2xfwloadbin == 1) |
| return qla81xx_load_risc(vha, srisc_addr); |
| |
| /* |
| * FW Load priority: |
| * 1) Firmware via request-firmware interface (.bin file). |
| * 2) Firmware residing in flash. |
| */ |
| rval = qla24xx_load_risc_blob(vha, srisc_addr); |
| if (rval == QLA_SUCCESS) |
| return rval; |
| |
| return qla24xx_load_risc_flash(vha, srisc_addr, |
| vha->hw->flt_region_fw); |
| } |
| |
| int |
| qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) |
| { |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| struct active_regions active_regions = { }; |
| |
| if (ql2xfwloadbin == 2) |
| goto try_blob_fw; |
| |
| /* FW Load priority: |
| * 1) Firmware residing in flash. |
| * 2) Firmware via request-firmware interface (.bin file). |
| * 3) Golden-Firmware residing in flash -- (limited operation). |
| */ |
| |
| if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha)) |
| goto try_primary_fw; |
| |
| qla27xx_get_active_image(vha, &active_regions); |
| |
| if (active_regions.global != QLA27XX_SECONDARY_IMAGE) |
| goto try_primary_fw; |
| |
| ql_dbg(ql_dbg_init, vha, 0x008b, |
| "Loading secondary firmware image.\n"); |
| rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw_sec); |
| if (!rval) |
| return rval; |
| |
| try_primary_fw: |
| ql_dbg(ql_dbg_init, vha, 0x008b, |
| "Loading primary firmware image.\n"); |
| rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw); |
| if (!rval) |
| return rval; |
| |
| try_blob_fw: |
| rval = qla24xx_load_risc_blob(vha, srisc_addr); |
| if (!rval || !ha->flt_region_gold_fw) |
| return rval; |
| |
| ql_log(ql_log_info, vha, 0x0099, |
| "Attempting to fallback to golden firmware.\n"); |
| rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw); |
| if (rval) |
| return rval; |
| |
| ql_log(ql_log_info, vha, 0x009a, "Need firmware flash update.\n"); |
| ha->flags.running_gold_fw = 1; |
| return rval; |
| } |
| |
| void |
| qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) |
| { |
| int ret, retries; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (ha->flags.pci_channel_io_perm_failure) |
| return; |
| if (!IS_FWI2_CAPABLE(ha)) |
| return; |
| if (!ha->fw_major_version) |
| return; |
| if (!ha->flags.fw_started) |
| return; |
| |
| ret = qla2x00_stop_firmware(vha); |
| for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT && |
| ret != QLA_INVALID_COMMAND && retries ; retries--) { |
| ha->isp_ops->reset_chip(vha); |
| if (ha->isp_ops->chip_diag(vha) != QLA_SUCCESS) |
| continue; |
| if (qla2x00_setup_chip(vha) != QLA_SUCCESS) |
| continue; |
| ql_log(ql_log_info, vha, 0x8015, |
| "Attempting retry of stop-firmware command.\n"); |
| ret = qla2x00_stop_firmware(vha); |
| } |
| |
| QLA_FW_STOPPED(ha); |
| ha->flags.fw_init_done = 0; |
| } |
| |
| int |
| qla24xx_configure_vhba(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_SUCCESS; |
| int rval2; |
| uint16_t mb[MAILBOX_REGISTER_COUNT]; |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| |
| if (!vha->vp_idx) |
| return -EINVAL; |
| |
| rval = qla2x00_fw_ready(base_vha); |
| |
| if (rval == QLA_SUCCESS) { |
| clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| qla2x00_marker(vha, ha->base_qpair, 0, 0, MK_SYNC_ALL); |
| } |
| |
| vha->flags.management_server_logged_in = 0; |
| |
| /* Login to SNS first */ |
| rval2 = ha->isp_ops->fabric_login(vha, NPH_SNS, 0xff, 0xff, 0xfc, mb, |
| BIT_1); |
| if (rval2 != QLA_SUCCESS || mb[0] != MBS_COMMAND_COMPLETE) { |
| if (rval2 == QLA_MEMORY_ALLOC_FAILED) |
| ql_dbg(ql_dbg_init, vha, 0x0120, |
| "Failed SNS login: loop_id=%x, rval2=%d\n", |
| NPH_SNS, rval2); |
| else |
| ql_dbg(ql_dbg_init, vha, 0x0103, |
| "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x " |
| "mb[2]=%x mb[6]=%x mb[7]=%x.\n", |
| NPH_SNS, mb[0], mb[1], mb[2], mb[6], mb[7]); |
| return (QLA_FUNCTION_FAILED); |
| } |
| |
| atomic_set(&vha->loop_down_timer, 0); |
| atomic_set(&vha->loop_state, LOOP_UP); |
| set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); |
| rval = qla2x00_loop_resync(base_vha); |
| |
| return rval; |
| } |
| |
| /* 84XX Support **************************************************************/ |
| |
| static LIST_HEAD(qla_cs84xx_list); |
| static DEFINE_MUTEX(qla_cs84xx_mutex); |
| |
| static struct qla_chip_state_84xx * |
| qla84xx_get_chip(struct scsi_qla_host *vha) |
| { |
| struct qla_chip_state_84xx *cs84xx; |
| struct qla_hw_data *ha = vha->hw; |
| |
| mutex_lock(&qla_cs84xx_mutex); |
| |
| /* Find any shared 84xx chip. */ |
| list_for_each_entry(cs84xx, &qla_cs84xx_list, list) { |
| if (cs84xx->bus == ha->pdev->bus) { |
| kref_get(&cs84xx->kref); |
| goto done; |
| } |
| } |
| |
| cs84xx = kzalloc(sizeof(*cs84xx), GFP_KERNEL); |
| if (!cs84xx) |
| goto done; |
| |
| kref_init(&cs84xx->kref); |
| spin_lock_init(&cs84xx->access_lock); |
| mutex_init(&cs84xx->fw_update_mutex); |
| cs84xx->bus = ha->pdev->bus; |
| |
| list_add_tail(&cs84xx->list, &qla_cs84xx_list); |
| done: |
| mutex_unlock(&qla_cs84xx_mutex); |
| return cs84xx; |
| } |
| |
| static void |
| __qla84xx_chip_release(struct kref *kref) |
| { |
| struct qla_chip_state_84xx *cs84xx = |
| container_of(kref, struct qla_chip_state_84xx, kref); |
| |
| mutex_lock(&qla_cs84xx_mutex); |
| list_del(&cs84xx->list); |
| mutex_unlock(&qla_cs84xx_mutex); |
| kfree(cs84xx); |
| } |
| |
| void |
| qla84xx_put_chip(struct scsi_qla_host *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (ha->cs84xx) |
| kref_put(&ha->cs84xx->kref, __qla84xx_chip_release); |
| } |
| |
| static int |
| qla84xx_init_chip(scsi_qla_host_t *vha) |
| { |
| int rval; |
| uint16_t status[2]; |
| struct qla_hw_data *ha = vha->hw; |
| |
| mutex_lock(&ha->cs84xx->fw_update_mutex); |
| |
| rval = qla84xx_verify_chip(vha, status); |
| |
| mutex_unlock(&ha->cs84xx->fw_update_mutex); |
| |
| return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED : |
| QLA_SUCCESS; |
| } |
| |
| /* 81XX Support **************************************************************/ |
| |
| int |
| qla81xx_nvram_config(scsi_qla_host_t *vha) |
| { |
| int rval; |
| struct init_cb_81xx *icb; |
| struct nvram_81xx *nv; |
| uint32_t *dptr; |
| uint8_t *dptr1, *dptr2; |
| uint32_t chksum; |
| uint16_t cnt; |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t faddr; |
| struct active_regions active_regions = { }; |
| |
| rval = QLA_SUCCESS; |
| icb = (struct init_cb_81xx *)ha->init_cb; |
| nv = ha->nvram; |
| |
| /* Determine NVRAM starting address. */ |
| ha->nvram_size = sizeof(*nv); |
| ha->vpd_size = FA_NVRAM_VPD_SIZE; |
| if (IS_P3P_TYPE(ha) || IS_QLA8031(ha)) |
| ha->vpd_size = FA_VPD_SIZE_82XX; |
| |
| if (IS_QLA28XX(ha) || IS_QLA27XX(ha)) |
| qla28xx_get_aux_images(vha, &active_regions); |
| |
| /* Get VPD data into cache */ |
| ha->vpd = ha->nvram + VPD_OFFSET; |
| |
| faddr = ha->flt_region_vpd; |
| if (IS_QLA28XX(ha)) { |
| if (active_regions.aux.vpd_nvram == QLA27XX_SECONDARY_IMAGE) |
| faddr = ha->flt_region_vpd_sec; |
| ql_dbg(ql_dbg_init, vha, 0x0110, |
| "Loading %s nvram image.\n", |
| active_regions.aux.vpd_nvram == QLA27XX_PRIMARY_IMAGE ? |
| "primary" : "secondary"); |
| } |
| qla24xx_read_flash_data(vha, ha->vpd, faddr, ha->vpd_size >> 2); |
| |
| /* Get NVRAM data into cache and calculate checksum. */ |
| faddr = ha->flt_region_nvram; |
| if (IS_QLA28XX(ha)) { |
| if (active_regions.aux.vpd_nvram == QLA27XX_SECONDARY_IMAGE) |
| faddr = ha->flt_region_nvram_sec; |
| } |
| ql_dbg(ql_dbg_init, vha, 0x0110, |
| "Loading %s nvram image.\n", |
| active_regions.aux.vpd_nvram == QLA27XX_PRIMARY_IMAGE ? |
| "primary" : "secondary"); |
| qla24xx_read_flash_data(vha, ha->nvram, faddr, ha->nvram_size >> 2); |
| |
| dptr = (uint32_t *)nv; |
| for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++, dptr++) |
| chksum += le32_to_cpu(*dptr); |
| |
| ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x0111, |
| "Contents of NVRAM:\n"); |
| ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0112, |
| nv, ha->nvram_size); |
| |
| /* Bad NVRAM data, set defaults parameters. */ |
| if (chksum || memcmp("ISP ", nv->id, sizeof(nv->id)) || |
| le16_to_cpu(nv->nvram_version) < ICB_VERSION) { |
| /* Reset NVRAM data. */ |
| ql_log(ql_log_info, vha, 0x0073, |
| "Inconsistent NVRAM checksum=%#x id=%.4s version=%#x.\n", |
| chksum, nv->id, le16_to_cpu(nv->nvram_version)); |
| ql_dump_buffer(ql_dbg_init, vha, 0x0073, nv, sizeof(*nv)); |
| ql_log(ql_log_info, vha, 0x0074, |
| "Falling back to functioning (yet invalid -- WWPN) " |
| "defaults.\n"); |
| |
| /* |
| * Set default initialization control block. |
| */ |
| memset(nv, 0, ha->nvram_size); |
| nv->nvram_version = cpu_to_le16(ICB_VERSION); |
| nv->version = cpu_to_le16(ICB_VERSION); |
| nv->frame_payload_size = 2048; |
| nv->execution_throttle = cpu_to_le16(0xFFFF); |
| nv->exchange_count = cpu_to_le16(0); |
| nv->port_name[0] = 0x21; |
| nv->port_name[1] = 0x00 + ha->port_no + 1; |
| nv->port_name[2] = 0x00; |
| nv->port_name[3] = 0xe0; |
| nv->port_name[4] = 0x8b; |
| nv->port_name[5] = 0x1c; |
| nv->port_name[6] = 0x55; |
| nv->port_name[7] = 0x86; |
| nv->node_name[0] = 0x20; |
| nv->node_name[1] = 0x00; |
| nv->node_name[2] = 0x00; |
| nv->node_name[3] = 0xe0; |
| nv->node_name[4] = 0x8b; |
| nv->node_name[5] = 0x1c; |
| nv->node_name[6] = 0x55; |
| nv->node_name[7] = 0x86; |
| nv->login_retry_count = cpu_to_le16(8); |
| nv->interrupt_delay_timer = cpu_to_le16(0); |
| nv->login_timeout = cpu_to_le16(0); |
| nv->firmware_options_1 = |
| cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1); |
| nv->firmware_options_2 = cpu_to_le32(2 << 4); |
| nv->firmware_options_2 |= cpu_to_le32(BIT_12); |
| nv->firmware_options_3 = cpu_to_le32(2 << 13); |
| nv->host_p = cpu_to_le32(BIT_11|BIT_10); |
| nv->efi_parameters = cpu_to_le32(0); |
| nv->reset_delay = 5; |
| nv->max_luns_per_target = cpu_to_le16(128); |
| nv->port_down_retry_count = cpu_to_le16(30); |
| nv->link_down_timeout = cpu_to_le16(180); |
| nv->enode_mac[0] = 0x00; |
| nv->enode_mac[1] = 0xC0; |
| nv->enode_mac[2] = 0xDD; |
| nv->enode_mac[3] = 0x04; |
| nv->enode_mac[4] = 0x05; |
| nv->enode_mac[5] = 0x06 + ha->port_no + 1; |
| |
| rval = 1; |
| } |
| |
| if (IS_T10_PI_CAPABLE(ha)) |
| nv->frame_payload_size &= ~7; |
| |
| qlt_81xx_config_nvram_stage1(vha, nv); |
| |
| /* Reset Initialization control block */ |
| memset(icb, 0, ha->init_cb_size); |
| |
| /* Copy 1st segment. */ |
| dptr1 = (uint8_t *)icb; |
| dptr2 = (uint8_t *)&nv->version; |
| cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version; |
| while (cnt--) |
| *dptr1++ = *dptr2++; |
| |
| icb->login_retry_count = nv->login_retry_count; |
| |
| /* Copy 2nd segment. */ |
| dptr1 = (uint8_t *)&icb->interrupt_delay_timer; |
| dptr2 = (uint8_t *)&nv->interrupt_delay_timer; |
| cnt = (uint8_t *)&icb->reserved_5 - |
| (uint8_t *)&icb->interrupt_delay_timer; |
| while (cnt--) |
| *dptr1++ = *dptr2++; |
| |
| memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac)); |
| /* Some boards (with valid NVRAMs) still have NULL enode_mac!! */ |
| if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) { |
| icb->enode_mac[0] = 0x00; |
| icb->enode_mac[1] = 0xC0; |
| icb->enode_mac[2] = 0xDD; |
| icb->enode_mac[3] = 0x04; |
| icb->enode_mac[4] = 0x05; |
| icb->enode_mac[5] = 0x06 + ha->port_no + 1; |
| } |
| |
| /* Use extended-initialization control block. */ |
| memcpy(ha->ex_init_cb, &nv->ex_version, sizeof(*ha->ex_init_cb)); |
| ha->frame_payload_size = le16_to_cpu(icb->frame_payload_size); |
| /* |
| * Setup driver NVRAM options. |
| */ |
| qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name), |
| "QLE8XXX"); |
| |
| qlt_81xx_config_nvram_stage2(vha, icb); |
| |
| /* Use alternate WWN? */ |
| if (nv->host_p & cpu_to_le32(BIT_15)) { |
| memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE); |
| memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE); |
| } |
| |
| /* Prepare nodename */ |
| if ((icb->firmware_options_1 & cpu_to_le32(BIT_14)) == 0) { |
| /* |
| * Firmware will apply the following mask if the nodename was |
| * not provided. |
| */ |
| memcpy(icb->node_name, icb->port_name, WWN_SIZE); |
| icb->node_name[0] &= 0xF0; |
| } |
| |
| /* Set host adapter parameters. */ |
| ha->flags.disable_risc_code_load = 0; |
| ha->flags.enable_lip_reset = 0; |
| ha->flags.enable_lip_full_login = |
| le32_to_cpu(nv->host_p) & BIT_10 ? 1 : 0; |
| ha->flags.enable_target_reset = |
| le32_to_cpu(nv->host_p) & BIT_11 ? 1 : 0; |
| ha->flags.enable_led_scheme = 0; |
| ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1 : 0; |
| |
| ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) & |
| (BIT_6 | BIT_5 | BIT_4)) >> 4; |
| |
| /* save HBA serial number */ |
| ha->serial0 = icb->port_name[5]; |
| ha->serial1 = icb->port_name[6]; |
| ha->serial2 = icb->port_name[7]; |
| memcpy(vha->node_name, icb->node_name, WWN_SIZE); |
| memcpy(vha->port_name, icb->port_name, WWN_SIZE); |
| |
| icb->execution_throttle = cpu_to_le16(0xFFFF); |
| |
| ha->retry_count = le16_to_cpu(nv->login_retry_count); |
| |
| /* Set minimum login_timeout to 4 seconds. */ |
| if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout) |
| nv->login_timeout = cpu_to_le16(ql2xlogintimeout); |
| if (le16_to_cpu(nv->login_timeout) < 4) |
| nv->login_timeout = cpu_to_le16(4); |
| ha->login_timeout = le16_to_cpu(nv->login_timeout); |
| |
| /* Set minimum RATOV to 100 tenths of a second. */ |
| ha->r_a_tov = 100; |
| |
| ha->loop_reset_delay = nv->reset_delay; |
| |
| /* Link Down Timeout = 0: |
| * |
| * When Port Down timer expires we will start returning |
| * I/O's to OS with "DID_NO_CONNECT". |
| * |
| * Link Down Timeout != 0: |
| * |
| * The driver waits for the link to come up after link down |
| * before returning I/Os to OS with "DID_NO_CONNECT". |
| */ |
| if (le16_to_cpu(nv->link_down_timeout) == 0) { |
| ha->loop_down_abort_time = |
| (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); |
| } else { |
| ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout); |
| ha->loop_down_abort_time = |
| (LOOP_DOWN_TIME - ha->link_down_timeout); |
| } |
| |
| /* Need enough time to try and get the port back. */ |
| ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count); |
| if (qlport_down_retry) |
| ha->port_down_retry_count = qlport_down_retry; |
| |
| /* Set login_retry_count */ |
| ha->login_retry_count = le16_to_cpu(nv->login_retry_count); |
| if (ha->port_down_retry_count == |
| le16_to_cpu(nv->port_down_retry_count) && |
| ha->port_down_retry_count > 3) |
| ha->login_retry_count = ha->port_down_retry_count; |
| else if (ha->port_down_retry_count > (int)ha->login_retry_count) |
| ha->login_retry_count = ha->port_down_retry_count; |
| if (ql2xloginretrycount) |
| ha->login_retry_count = ql2xloginretrycount; |
| |
| /* if not running MSI-X we need handshaking on interrupts */ |
| if (!vha->hw->flags.msix_enabled && |
| (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))) |
| icb->firmware_options_2 |= cpu_to_le32(BIT_22); |
| |
| /* Enable ZIO. */ |
| if (!vha->flags.init_done) { |
| ha->zio_mode = le32_to_cpu(icb->firmware_options_2) & |
| (BIT_3 | BIT_2 | BIT_1 | BIT_0); |
| ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ? |
| le16_to_cpu(icb->interrupt_delay_timer) : 2; |
| } |
| icb->firmware_options_2 &= cpu_to_le32( |
| ~(BIT_3 | BIT_2 | BIT_1 | BIT_0)); |
| vha->flags.process_response_queue = 0; |
| if (ha->zio_mode != QLA_ZIO_DISABLED) { |
| ha->zio_mode = QLA_ZIO_MODE_6; |
| |
| ql_log(ql_log_info, vha, 0x0075, |
| "ZIO mode %d enabled; timer delay (%d us).\n", |
| ha->zio_mode, |
| ha->zio_timer * 100); |
| |
| icb->firmware_options_2 |= cpu_to_le32( |
| (uint32_t)ha->zio_mode); |
| icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer); |
| vha->flags.process_response_queue = 1; |
| } |
| |
| /* enable RIDA Format2 */ |
| icb->firmware_options_3 |= BIT_0; |
| |
| /* N2N: driver will initiate Login instead of FW */ |
| icb->firmware_options_3 |= BIT_8; |
| |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x0076, |
| "NVRAM configuration failed.\n"); |
| } |
| return (rval); |
| } |
| |
| int |
| qla82xx_restart_isp(scsi_qla_host_t *vha) |
| { |
| int status, rval; |
| struct qla_hw_data *ha = vha->hw; |
| struct scsi_qla_host *vp; |
| unsigned long flags; |
| |
| status = qla2x00_init_rings(vha); |
| if (!status) { |
| clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| ha->flags.chip_reset_done = 1; |
| |
| status = qla2x00_fw_ready(vha); |
| if (!status) { |
| /* Issue a marker after FW becomes ready. */ |
| qla2x00_marker(vha, ha->base_qpair, 0, 0, MK_SYNC_ALL); |
| vha->flags.online = 1; |
| set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); |
| } |
| |
| /* if no cable then assume it's good */ |
| if ((vha->device_flags & DFLG_NO_CABLE)) |
| status = 0; |
| } |
| |
| if (!status) { |
| clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); |
| |
| if (!atomic_read(&vha->loop_down_timer)) { |
| /* |
| * Issue marker command only when we are going |
| * to start the I/O . |
| */ |
| vha->marker_needed = 1; |
| } |
| |
| ha->isp_ops->enable_intrs(ha); |
| |
| ha->isp_abort_cnt = 0; |
| clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| |
| /* Update the firmware version */ |
| status = qla82xx_check_md_needed(vha); |
| |
| if (ha->fce) { |
| ha->flags.fce_enabled = 1; |
| memset(ha->fce, 0, |
| fce_calc_size(ha->fce_bufs)); |
| rval = qla2x00_enable_fce_trace(vha, |
| ha->fce_dma, ha->fce_bufs, ha->fce_mb, |
| &ha->fce_bufs); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x8001, |
| "Unable to reinitialize FCE (%d).\n", |
| rval); |
| ha->flags.fce_enabled = 0; |
| } |
| } |
| |
| if (ha->eft) { |
| memset(ha->eft, 0, EFT_SIZE); |
| rval = qla2x00_enable_eft_trace(vha, |
| ha->eft_dma, EFT_NUM_BUFFERS); |
| if (rval) { |
| ql_log(ql_log_warn, vha, 0x8010, |
| "Unable to reinitialize EFT (%d).\n", |
| rval); |
| } |
| } |
| } |
| |
| if (!status) { |
| ql_dbg(ql_dbg_taskm, vha, 0x8011, |
| "qla82xx_restart_isp succeeded.\n"); |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| list_for_each_entry(vp, &ha->vp_list, list) { |
| if (vp->vp_idx) { |
| atomic_inc(&vp->vref_count); |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| qla2x00_vp_abort_isp(vp); |
| |
| spin_lock_irqsave(&ha->vport_slock, flags); |
| atomic_dec(&vp->vref_count); |
| } |
| } |
| spin_unlock_irqrestore(&ha->vport_slock, flags); |
| |
| } else { |
| ql_log(ql_log_warn, vha, 0x8016, |
| "qla82xx_restart_isp **** FAILED ****.\n"); |
| } |
| |
| return status; |
| } |
| |
| void |
| qla81xx_update_fw_options(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Hold status IOCBs until ABTS response received. */ |
| if (ql2xfwholdabts) |
| ha->fw_options[3] |= BIT_12; |
| |
| /* Set Retry FLOGI in case of P2P connection */ |
| if (ha->operating_mode == P2P) { |
| ha->fw_options[2] |= BIT_3; |
| ql_dbg(ql_dbg_disc, vha, 0x2103, |
| "(%s): Setting FLOGI retry BIT in fw_options[2]: 0x%x\n", |
| __func__, ha->fw_options[2]); |
| } |
| |
| /* Move PUREX, ABTS RX & RIDA to ATIOQ */ |
| if (ql2xmvasynctoatio) { |
| if (qla_tgt_mode_enabled(vha) || |
| qla_dual_mode_enabled(vha)) |
| ha->fw_options[2] |= BIT_11; |
| else |
| ha->fw_options[2] &= ~BIT_11; |
| } |
| |
| if (qla_tgt_mode_enabled(vha) || |
| qla_dual_mode_enabled(vha)) { |
| /* FW auto send SCSI status during */ |
| ha->fw_options[1] |= BIT_8; |
| ha->fw_options[10] |= (u16)SAM_STAT_BUSY << 8; |
| |
| /* FW perform Exchange validation */ |
| ha->fw_options[2] |= BIT_4; |
| } else { |
| ha->fw_options[1] &= ~BIT_8; |
| ha->fw_options[10] &= 0x00ff; |
| |
| ha->fw_options[2] &= ~BIT_4; |
| } |
| |
| if (ql2xetsenable) { |
| /* Enable ETS Burst. */ |
| memset(ha->fw_options, 0, sizeof(ha->fw_options)); |
| ha->fw_options[2] |= BIT_9; |
| } |
| |
| ql_dbg(ql_dbg_init, vha, 0x00e9, |
| "%s, add FW options 1-3 = 0x%04x 0x%04x 0x%04x mode %x\n", |
| __func__, ha->fw_options[1], ha->fw_options[2], |
| ha->fw_options[3], vha->host->active_mode); |
| |
| qla2x00_set_fw_options(vha, ha->fw_options); |
| } |
| |
| /* |
| * qla24xx_get_fcp_prio |
| * Gets the fcp cmd priority value for the logged in port. |
| * Looks for a match of the port descriptors within |
| * each of the fcp prio config entries. If a match is found, |
| * the tag (priority) value is returned. |
| * |
| * Input: |
| * vha = scsi host structure pointer. |
| * fcport = port structure pointer. |
| * |
| * Return: |
| * non-zero (if found) |
| * -1 (if not found) |
| * |
| * Context: |
| * Kernel context |
| */ |
| static int |
| qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport) |
| { |
| int i, entries; |
| uint8_t pid_match, wwn_match; |
| int priority; |
| uint32_t pid1, pid2; |
| uint64_t wwn1, wwn2; |
| struct qla_fcp_prio_entry *pri_entry; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled) |
| return -1; |
| |
| priority = -1; |
| entries = ha->fcp_prio_cfg->num_entries; |
| pri_entry = &ha->fcp_prio_cfg->entry[0]; |
| |
| for (i = 0; i < entries; i++) { |
| pid_match = wwn_match = 0; |
| |
| if (!(pri_entry->flags & FCP_PRIO_ENTRY_VALID)) { |
| pri_entry++; |
| continue; |
| } |
| |
| /* check source pid for a match */ |
| if (pri_entry->flags & FCP_PRIO_ENTRY_SPID_VALID) { |
| pid1 = pri_entry->src_pid & INVALID_PORT_ID; |
| pid2 = vha->d_id.b24 & INVALID_PORT_ID; |
| if (pid1 == INVALID_PORT_ID) |
| pid_match++; |
| else if (pid1 == pid2) |
| pid_match++; |
| } |
| |
| /* check destination pid for a match */ |
| if (pri_entry->flags & FCP_PRIO_ENTRY_DPID_VALID) { |
| pid1 = pri_entry->dst_pid & INVALID_PORT_ID; |
| pid2 = fcport->d_id.b24 & INVALID_PORT_ID; |
| if (pid1 == INVALID_PORT_ID) |
| pid_match++; |
| else if (pid1 == pid2) |
| pid_match++; |
| } |
| |
| /* check source WWN for a match */ |
| if (pri_entry->flags & FCP_PRIO_ENTRY_SWWN_VALID) { |
| wwn1 = wwn_to_u64(vha->port_name); |
| wwn2 = wwn_to_u64(pri_entry->src_wwpn); |
| if (wwn2 == (uint64_t)-1) |
| wwn_match++; |
| else if (wwn1 == wwn2) |
| wwn_match++; |
| } |
| |
| /* check destination WWN for a match */ |
| if (pri_entry->flags & FCP_PRIO_ENTRY_DWWN_VALID) { |
| wwn1 = wwn_to_u64(fcport->port_name); |
| wwn2 = wwn_to_u64(pri_entry->dst_wwpn); |
| if (wwn2 == (uint64_t)-1) |
| wwn_match++; |
| else if (wwn1 == wwn2) |
| wwn_match++; |
| } |
| |
| if (pid_match == 2 || wwn_match == 2) { |
| /* Found a matching entry */ |
| if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID) |
| priority = pri_entry->tag; |
| break; |
| } |
| |
| pri_entry++; |
| } |
| |
| return priority; |
| } |
| |
| /* |
| * qla24xx_update_fcport_fcp_prio |
| * Activates fcp priority for the logged in fc port |
| * |
| * Input: |
| * vha = scsi host structure pointer. |
| * fcp = port structure pointer. |
| * |
| * Return: |
| * QLA_SUCCESS or QLA_FUNCTION_FAILED |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport) |
| { |
| int ret; |
| int priority; |
| uint16_t mb[5]; |
| |
| if (fcport->port_type != FCT_TARGET || |
| fcport->loop_id == FC_NO_LOOP_ID) |
| return QLA_FUNCTION_FAILED; |
| |
| priority = qla24xx_get_fcp_prio(vha, fcport); |
| if (priority < 0) |
| return QLA_FUNCTION_FAILED; |
| |
| if (IS_P3P_TYPE(vha->hw)) { |
| fcport->fcp_prio = priority & 0xf; |
| return QLA_SUCCESS; |
| } |
| |
| ret = qla24xx_set_fcp_prio(vha, fcport->loop_id, priority, mb); |
| if (ret == QLA_SUCCESS) { |
| if (fcport->fcp_prio != priority) |
| ql_dbg(ql_dbg_user, vha, 0x709e, |
| "Updated FCP_CMND priority - value=%d loop_id=%d " |
| "port_id=%02x%02x%02x.\n", priority, |
| fcport->loop_id, fcport->d_id.b.domain, |
| fcport->d_id.b.area, fcport->d_id.b.al_pa); |
| fcport->fcp_prio = priority & 0xf; |
| } else |
| ql_dbg(ql_dbg_user, vha, 0x704f, |
| "Unable to update FCP_CMND priority - ret=0x%x for " |
| "loop_id=%d port_id=%02x%02x%02x.\n", ret, fcport->loop_id, |
| fcport->d_id.b.domain, fcport->d_id.b.area, |
| fcport->d_id.b.al_pa); |
| return ret; |
| } |
| |
| /* |
| * qla24xx_update_all_fcp_prio |
| * Activates fcp priority for all the logged in ports |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Return: |
| * QLA_SUCCESS or QLA_FUNCTION_FAILED |
| * |
| * Context: |
| * Kernel context. |
| */ |
| int |
| qla24xx_update_all_fcp_prio(scsi_qla_host_t *vha) |
| { |
| int ret; |
| fc_port_t *fcport; |
| |
| ret = QLA_FUNCTION_FAILED; |
| /* We need to set priority for all logged in ports */ |
| list_for_each_entry(fcport, &vha->vp_fcports, list) |
| ret = qla24xx_update_fcport_fcp_prio(vha, fcport); |
| |
| return ret; |
| } |
| |
| struct qla_qpair *qla2xxx_create_qpair(struct scsi_qla_host *vha, int qos, |
| int vp_idx, bool startqp) |
| { |
| int rsp_id = 0; |
| int req_id = 0; |
| int i; |
| struct qla_hw_data *ha = vha->hw; |
| uint16_t qpair_id = 0; |
| struct qla_qpair *qpair = NULL; |
| struct qla_msix_entry *msix; |
| |
| if (!(ha->fw_attributes & BIT_6) || !ha->flags.msix_enabled) { |
| ql_log(ql_log_warn, vha, 0x00181, |
| "FW/Driver is not multi-queue capable.\n"); |
| return NULL; |
| } |
| |
| if (ql2xmqsupport || ql2xnvmeenable) { |
| qpair = kzalloc(sizeof(struct qla_qpair), GFP_KERNEL); |
| if (qpair == NULL) { |
| ql_log(ql_log_warn, vha, 0x0182, |
| "Failed to allocate memory for queue pair.\n"); |
| return NULL; |
| } |
| |
| qpair->hw = vha->hw; |
| qpair->vha = vha; |
| qpair->qp_lock_ptr = &qpair->qp_lock; |
| spin_lock_init(&qpair->qp_lock); |
| qpair->use_shadow_reg = IS_SHADOW_REG_CAPABLE(ha) ? 1 : 0; |
| |
| /* Assign available que pair id */ |
| mutex_lock(&ha->mq_lock); |
| qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs); |
| if (ha->num_qpairs >= ha->max_qpairs) { |
| mutex_unlock(&ha->mq_lock); |
| ql_log(ql_log_warn, vha, 0x0183, |
| "No resources to create additional q pair.\n"); |
| goto fail_qid_map; |
| } |
| ha->num_qpairs++; |
| set_bit(qpair_id, ha->qpair_qid_map); |
| ha->queue_pair_map[qpair_id] = qpair; |
| qpair->id = qpair_id; |
| qpair->vp_idx = vp_idx; |
| qpair->fw_started = ha->flags.fw_started; |
| INIT_LIST_HEAD(&qpair->hints_list); |
| qpair->chip_reset = ha->base_qpair->chip_reset; |
| qpair->enable_class_2 = ha->base_qpair->enable_class_2; |
| qpair->enable_explicit_conf = |
| ha->base_qpair->enable_explicit_conf; |
| |
| for (i = 0; i < ha->msix_count; i++) { |
| msix = &ha->msix_entries[i]; |
| if (msix->in_use) |
| continue; |
| qpair->msix = msix; |
| ql_dbg(ql_dbg_multiq, vha, 0xc00f, |
| "Vector %x selected for qpair\n", msix->vector); |
| break; |
| } |
| if (!qpair->msix) { |
| ql_log(ql_log_warn, vha, 0x0184, |
| "Out of MSI-X vectors!.\n"); |
| goto fail_msix; |
| } |
| |
| qpair->msix->in_use = 1; |
| list_add_tail(&qpair->qp_list_elem, &vha->qp_list); |
| qpair->pdev = ha->pdev; |
| if (IS_QLA27XX(ha) || IS_QLA83XX(ha) || IS_QLA28XX(ha)) |
| qpair->reqq_start_iocbs = qla_83xx_start_iocbs; |
| |
| mutex_unlock(&ha->mq_lock); |
| |
| /* Create response queue first */ |
| rsp_id = qla25xx_create_rsp_que(ha, 0, 0, 0, qpair, startqp); |
| if (!rsp_id) { |
| ql_log(ql_log_warn, vha, 0x0185, |
| "Failed to create response queue.\n"); |
| goto fail_rsp; |
| } |
| |
| qpair->rsp = ha->rsp_q_map[rsp_id]; |
| |
| /* Create request queue */ |
| req_id = qla25xx_create_req_que(ha, 0, vp_idx, 0, rsp_id, qos, |
| startqp); |
| if (!req_id) { |
| ql_log(ql_log_warn, vha, 0x0186, |
| "Failed to create request queue.\n"); |
| goto fail_req; |
| } |
| |
| qpair->req = ha->req_q_map[req_id]; |
| qpair->rsp->req = qpair->req; |
| qpair->rsp->qpair = qpair; |
| /* init qpair to this cpu. Will adjust at run time. */ |
| qla_cpu_update(qpair, smp_processor_id()); |
| |
| if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { |
| if (ha->fw_attributes & BIT_4) |
| qpair->difdix_supported = 1; |
| } |
| |
| qpair->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep); |
| if (!qpair->srb_mempool) { |
| ql_log(ql_log_warn, vha, 0xd036, |
| "Failed to create srb mempool for qpair %d\n", |
| qpair->id); |
| goto fail_mempool; |
| } |
| |
| /* Mark as online */ |
| qpair->online = 1; |
| |
| if (!vha->flags.qpairs_available) |
| vha->flags.qpairs_available = 1; |
| |
| ql_dbg(ql_dbg_multiq, vha, 0xc00d, |
| "Request/Response queue pair created, id %d\n", |
| qpair->id); |
| ql_dbg(ql_dbg_init, vha, 0x0187, |
| "Request/Response queue pair created, id %d\n", |
| qpair->id); |
| } |
| return qpair; |
| |
| fail_mempool: |
| fail_req: |
| qla25xx_delete_rsp_que(vha, qpair->rsp); |
| fail_rsp: |
| mutex_lock(&ha->mq_lock); |
| qpair->msix->in_use = 0; |
| list_del(&qpair->qp_list_elem); |
| if (list_empty(&vha->qp_list)) |
| vha->flags.qpairs_available = 0; |
| fail_msix: |
| ha->queue_pair_map[qpair_id] = NULL; |
| clear_bit(qpair_id, ha->qpair_qid_map); |
| ha->num_qpairs--; |
| mutex_unlock(&ha->mq_lock); |
| fail_qid_map: |
| kfree(qpair); |
| return NULL; |
| } |
| |
| int qla2xxx_delete_qpair(struct scsi_qla_host *vha, struct qla_qpair *qpair) |
| { |
| int ret = QLA_FUNCTION_FAILED; |
| struct qla_hw_data *ha = qpair->hw; |
| |
| qpair->delete_in_progress = 1; |
| while (atomic_read(&qpair->ref_count)) |
| msleep(500); |
| |
| ret = qla25xx_delete_req_que(vha, qpair->req); |
| if (ret != QLA_SUCCESS) |
| goto fail; |
| |
| ret = qla25xx_delete_rsp_que(vha, qpair->rsp); |
| if (ret != QLA_SUCCESS) |
| goto fail; |
| |
| mutex_lock(&ha->mq_lock); |
| ha->queue_pair_map[qpair->id] = NULL; |
| clear_bit(qpair->id, ha->qpair_qid_map); |
| ha->num_qpairs--; |
| list_del(&qpair->qp_list_elem); |
| if (list_empty(&vha->qp_list)) { |
| vha->flags.qpairs_available = 0; |
| vha->flags.qpairs_req_created = 0; |
| vha->flags.qpairs_rsp_created = 0; |
| } |
| mempool_destroy(qpair->srb_mempool); |
| kfree(qpair); |
| mutex_unlock(&ha->mq_lock); |
| |
| return QLA_SUCCESS; |
| fail: |
| return ret; |
| } |