| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/iio/accel/bosch,bma180.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial accelerometers |
| |
| maintainers: |
| - Jonathan Cameron <jic23@kernel.org> |
| |
| description: | |
| https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf |
| http://omapworld.com/BMA180_111_1002839.pdf |
| http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf |
| |
| properties: |
| compatible: |
| enum: |
| - bosch,bma023 |
| - bosch,bma150 |
| - bosch,bma180 |
| - bosch,bma250 |
| - bosch,bma254 |
| - bosch,smb380 |
| |
| reg: |
| maxItems: 1 |
| |
| vdd-supply: true |
| |
| vddio-supply: true |
| |
| interrupts: |
| minItems: 1 |
| maxItems: 2 |
| description: | |
| Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. |
| For the bma250 the first interrupt listed must be the one |
| connected to the INT1 pin, the second (optional) interrupt |
| listed must be the one connected to the INT2 pin. |
| |
| required: |
| - compatible |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/irq.h> |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| accel@40 { |
| compatible = "bosch,bma180"; |
| reg = <0x40>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; |
| }; |
| }; |
| ... |