blob: 7723ad5efd37bb057c6b1a81c87e5766c25e944d [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for LX2160ARDB
//
// Copyright 2018 NXP
/dts-v1/;
#include "fsl-lx2160a.dtsi"
/ {
model = "NXP Layerscape LX2160ARDB";
compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
aliases {
crypto = &crypto;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
sb_3v3: regulator-sb3v3 {
compatible = "regulator-fixed";
regulator-name = "MC34717-3.3VSB";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&crypto {
status = "okay";
};
&dpmac3 {
phy-handle = <&aquantia_phy1>;
phy-connection-type = "usxgmii";
managed = "in-band-status";
};
&dpmac4 {
phy-handle = <&aquantia_phy2>;
phy-connection-type = "usxgmii";
managed = "in-band-status";
};
&dpmac17 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii-id";
};
&dpmac18 {
phy-handle = <&rgmii_phy2>;
phy-connection-type = "rgmii-id";
};
&emdio1 {
status = "okay";
rgmii_phy1: ethernet-phy@1 {
/* AR8035 PHY */
compatible = "ethernet-phy-id004d.d072";
reg = <0x1>;
eee-broken-1000t;
};
rgmii_phy2: ethernet-phy@2 {
/* AR8035 PHY */
compatible = "ethernet-phy-id004d.d072";
reg = <0x2>;
eee-broken-1000t;
};
aquantia_phy1: ethernet-phy@4 {
/* AQR107 PHY */
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x4>;
};
aquantia_phy2: ethernet-phy@5 {
/* AQR107 PHY */
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x5>;
};
};
&esdhc0 {
sd-uhs-sdr104;
sd-uhs-sdr50;
sd-uhs-sdr25;
sd-uhs-sdr12;
status = "okay";
};
&esdhc1 {
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
status = "okay";
};
&fspi {
status = "okay";
mt35xu512aba0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
m25p,fast-read;
spi-max-frequency = <50000000>;
reg = <0>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <8>;
};
mt35xu512aba1: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
m25p,fast-read;
spi-max-frequency = <50000000>;
reg = <1>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <8>;
};
};
&i2c0 {
status = "okay";
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
power-monitor@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <500>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
temperature-sensor@4c {
compatible = "nxp,sa56004";
reg = <0x4c>;
vcc-supply = <&sb_3v3>;
};
temperature-sensor@4d {
compatible = "nxp,sa56004";
reg = <0x4d>;
vcc-supply = <&sb_3v3>;
};
};
};
};
&i2c4 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
// IRQ10_B
interrupts = <0 150 0x4>;
};
};
&pcs_mdio3 {
status = "okay";
};
&pcs_mdio4 {
status = "okay";
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&sata2 {
status = "okay";
};
&sata3 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};