| /* |
| * OMAP2/3 Clock Management (CM) register definitions |
| * |
| * Copyright (C) 2007-2009 Texas Instruments, Inc. |
| * Copyright (C) 2007-2010 Nokia Corporation |
| * Paul Walmsley |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * The CM hardware modules on the OMAP2/3 are quite similar to each |
| * other. The CM modules/instances on OMAP4 are quite different, so |
| * they are handled in a separate file. |
| */ |
| #ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H |
| #define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H |
| |
| #include "cm.h" |
| |
| /* |
| * Module specific CM register offsets from CM_BASE + domain offset |
| * Use cm_{read,write}_mod_reg() with these registers. |
| * These register offsets generally appear in more than one PRCM submodule. |
| */ |
| |
| /* Common between OMAP2 and OMAP3 */ |
| |
| #define CM_FCLKEN 0x0000 |
| #define CM_FCLKEN1 CM_FCLKEN |
| #define CM_CLKEN CM_FCLKEN |
| #define CM_ICLKEN 0x0010 |
| #define CM_ICLKEN1 CM_ICLKEN |
| #define CM_ICLKEN2 0x0014 |
| #define CM_ICLKEN3 0x0018 |
| #define CM_IDLEST 0x0020 |
| #define CM_IDLEST1 CM_IDLEST |
| #define CM_IDLEST2 0x0024 |
| #define OMAP2430_CM_IDLEST3 0x0028 |
| #define CM_AUTOIDLE 0x0030 |
| #define CM_AUTOIDLE1 CM_AUTOIDLE |
| #define CM_AUTOIDLE2 0x0034 |
| #define CM_AUTOIDLE3 0x0038 |
| #define CM_CLKSEL 0x0040 |
| #define CM_CLKSEL1 CM_CLKSEL |
| #define CM_CLKSEL2 0x0044 |
| #define OMAP2_CM_CLKSTCTRL 0x0048 |
| |
| #ifndef __ASSEMBLER__ |
| |
| #include <linux/io.h> |
| |
| static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx) |
| { |
| return readl_relaxed(cm_base + module + idx); |
| } |
| |
| static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) |
| { |
| writel_relaxed(val, cm_base + module + idx); |
| } |
| |
| /* Read-modify-write a register in a CM module. Caller must lock */ |
| static inline u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, |
| s16 idx) |
| { |
| u32 v; |
| |
| v = omap2_cm_read_mod_reg(module, idx); |
| v &= ~mask; |
| v |= bits; |
| omap2_cm_write_mod_reg(v, module, idx); |
| |
| return v; |
| } |
| |
| /* Read a CM register, AND it, and shift the result down to bit 0 */ |
| static inline u32 omap2_cm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) |
| { |
| u32 v; |
| |
| v = omap2_cm_read_mod_reg(domain, idx); |
| v &= mask; |
| v >>= __ffs(mask); |
| |
| return v; |
| } |
| |
| static inline u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) |
| { |
| return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx); |
| } |
| |
| static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) |
| { |
| return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx); |
| } |
| |
| extern int omap2xxx_cm_apll54_enable(void); |
| extern void omap2xxx_cm_apll54_disable(void); |
| extern int omap2xxx_cm_apll96_enable(void); |
| extern void omap2xxx_cm_apll96_disable(void); |
| |
| #endif |
| |
| /* CM register bits shared between 24XX and 3430 */ |
| |
| /* CM_CLKSEL_GFX */ |
| #define OMAP_CLKSEL_GFX_SHIFT 0 |
| #define OMAP_CLKSEL_GFX_MASK (0x7 << 0) |
| #define OMAP_CLKSEL_GFX_WIDTH 3 |
| |
| /* CM_ICLKEN_GFX */ |
| #define OMAP_EN_GFX_SHIFT 0 |
| #define OMAP_EN_GFX_MASK (1 << 0) |
| |
| /* CM_IDLEST_GFX */ |
| #define OMAP_ST_GFX_MASK (1 << 0) |
| |
| #endif |