| /* This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1999-2007 by Helge Deller <deller@gmx.de> |
| * Copyright 1999 SuSE GmbH (Philipp Rumpf) |
| * Copyright 1999 Philipp Rumpf (prumpf@tux.org) |
| * Copyright 2000 Hewlett Packard (Paul Bame, bame@puffin.external.hp.com) |
| * Copyright (C) 2001 Grant Grundler (Hewlett Packard) |
| * Copyright (C) 2004 Kyle McMartin <kyle@debian.org> |
| * |
| * Initial Version 04-23-1999 by Helge Deller <deller@gmx.de> |
| */ |
| |
| #include <asm/asm-offsets.h> |
| #include <asm/psw.h> |
| #include <asm/pdc.h> |
| |
| #include <asm/assembly.h> |
| #include <asm/pgtable.h> |
| |
| #include <linux/linkage.h> |
| #include <linux/init.h> |
| |
| .level PA_ASM_LEVEL |
| |
| __INITDATA |
| ENTRY(boot_args) |
| .word 0 /* arg0 */ |
| .word 0 /* arg1 */ |
| .word 0 /* arg2 */ |
| .word 0 /* arg3 */ |
| END(boot_args) |
| |
| __HEAD |
| |
| .align 4 |
| .import init_thread_union,data |
| .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ |
| #ifndef CONFIG_64BIT |
| .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ |
| .import $global$ /* forward declaration */ |
| #endif /*!CONFIG_64BIT*/ |
| ENTRY(parisc_kernel_start) |
| .proc |
| .callinfo |
| |
| /* Make sure sr4-sr7 are set to zero for the kernel address space */ |
| mtsp %r0,%sr4 |
| mtsp %r0,%sr5 |
| mtsp %r0,%sr6 |
| mtsp %r0,%sr7 |
| |
| /* Clear BSS (shouldn't the boot loader do this?) */ |
| |
| .import __bss_start,data |
| .import __bss_stop,data |
| |
| load32 PA(__bss_start),%r3 |
| load32 PA(__bss_stop),%r4 |
| $bss_loop: |
| cmpb,<<,n %r3,%r4,$bss_loop |
| stw,ma %r0,4(%r3) |
| |
| /* Save away the arguments the boot loader passed in (32 bit args) */ |
| load32 PA(boot_args),%r1 |
| stw,ma %arg0,4(%r1) |
| stw,ma %arg1,4(%r1) |
| stw,ma %arg2,4(%r1) |
| stw,ma %arg3,4(%r1) |
| |
| /* Initialize startup VM. Just map first 16/32 MB of memory */ |
| load32 PA(swapper_pg_dir),%r4 |
| mtctl %r4,%cr24 /* Initialize kernel root pointer */ |
| mtctl %r4,%cr25 /* Initialize user root pointer */ |
| |
| #if CONFIG_PGTABLE_LEVELS == 3 |
| /* Set pmd in pgd */ |
| load32 PA(pmd0),%r5 |
| shrd %r5,PxD_VALUE_SHIFT,%r3 |
| ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 |
| stw %r3,ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4) |
| ldo ASM_PMD_ENTRY*ASM_PMD_ENTRY_SIZE(%r5),%r4 |
| #else |
| /* 2-level page table, so pmd == pgd */ |
| ldo ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4 |
| #endif |
| |
| /* Fill in pmd with enough pte directories */ |
| load32 PA(pg0),%r1 |
| SHRREG %r1,PxD_VALUE_SHIFT,%r3 |
| ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 |
| |
| ldi ASM_PT_INITIAL,%r1 |
| |
| 1: |
| stw %r3,0(%r4) |
| ldo (PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 |
| addib,> -1,%r1,1b |
| #if CONFIG_PGTABLE_LEVELS == 3 |
| ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 |
| #else |
| ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 |
| #endif |
| |
| |
| /* Now initialize the PTEs themselves. We use RWX for |
| * everything ... it will get remapped correctly later */ |
| ldo 0+_PAGE_KERNEL_RWX(%r0),%r3 /* Hardwired 0 phys addr start */ |
| load32 (1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */ |
| load32 PA(pg0),%r1 |
| |
| $pgt_fill_loop: |
| STREGM %r3,ASM_PTE_ENTRY_SIZE(%r1) |
| ldo (1<<PFN_PTE_SHIFT)(%r3),%r3 /* add one PFN */ |
| addib,> -1,%r11,$pgt_fill_loop |
| nop |
| |
| /* Load the return address...er...crash 'n burn */ |
| copy %r0,%r2 |
| |
| /* And the RFI Target address too */ |
| load32 start_parisc,%r11 |
| |
| /* And the initial task pointer */ |
| load32 init_thread_union,%r6 |
| mtctl %r6,%cr30 |
| |
| /* And the stack pointer too */ |
| ldo THREAD_SZ_ALGN(%r6),%sp |
| |
| #if defined(CONFIG_64BIT) && defined(CONFIG_FUNCTION_TRACER) |
| .import _mcount,data |
| /* initialize mcount FPTR */ |
| /* Get the global data pointer */ |
| loadgp |
| load32 PA(_mcount), %r10 |
| std %dp,0x18(%r10) |
| #endif |
| |
| #ifdef CONFIG_64BIT |
| /* Get PDCE_PROC for monarch CPU. */ |
| #define MEM_PDC_LO 0x388 |
| #define MEM_PDC_HI 0x35C |
| ldw MEM_PDC_LO(%r0),%r3 |
| ldw MEM_PDC_HI(%r0),%r10 |
| depd %r10, 31, 32, %r3 /* move to upper word */ |
| #endif |
| |
| |
| #ifdef CONFIG_SMP |
| /* Set the smp rendezvous address into page zero. |
| ** It would be safer to do this in init_smp_config() but |
| ** it's just way easier to deal with here because |
| ** of 64-bit function ptrs and the address is local to this file. |
| */ |
| load32 PA(smp_slave_stext),%r10 |
| stw %r10,0x10(%r0) /* MEM_RENDEZ */ |
| stw %r0,0x28(%r0) /* MEM_RENDEZ_HI - assume addr < 4GB */ |
| |
| /* FALLTHROUGH */ |
| .procend |
| |
| /* |
| ** Code Common to both Monarch and Slave processors. |
| ** Entry: |
| ** |
| ** 1.1: |
| ** %r11 must contain RFI target address. |
| ** %r25/%r26 args to pass to target function |
| ** %r2 in case rfi target decides it didn't like something |
| ** |
| ** 2.0w: |
| ** %r3 PDCE_PROC address |
| ** %r11 RFI target address |
| ** |
| ** Caller must init: SR4-7, %sp, %r10, %cr24/25, |
| */ |
| common_stext: |
| .proc |
| .callinfo |
| #else |
| /* Clear PDC entry point - we won't use it */ |
| stw %r0,0x10(%r0) /* MEM_RENDEZ */ |
| stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */ |
| #endif /*CONFIG_SMP*/ |
| |
| #ifdef CONFIG_64BIT |
| tophys_r1 %sp |
| |
| /* Save the rfi target address */ |
| ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10 |
| tophys_r1 %r10 |
| std %r11, TASK_PT_GR11(%r10) |
| /* Switch to wide mode Superdome doesn't support narrow PDC |
| ** calls. |
| */ |
| 1: mfia %rp /* clear upper part of pcoq */ |
| ldo 2f-1b(%rp),%rp |
| depdi 0,31,32,%rp |
| bv (%rp) |
| ssm PSW_SM_W,%r0 |
| |
| /* Set Wide mode as the "Default" (eg for traps) |
| ** First trap occurs *right* after (or part of) rfi for slave CPUs. |
| ** Someday, palo might not do this for the Monarch either. |
| */ |
| 2: |
| mfctl %cr30,%r6 /* PCX-W2 firmware bug */ |
| |
| ldo PDC_PSW(%r0),%arg0 /* 21 */ |
| ldo PDC_PSW_SET_DEFAULTS(%r0),%arg1 /* 2 */ |
| ldo PDC_PSW_WIDE_BIT(%r0),%arg2 /* 2 */ |
| load32 PA(stext_pdc_ret), %rp |
| bv (%r3) |
| copy %r0,%arg3 |
| |
| stext_pdc_ret: |
| mtctl %r6,%cr30 /* restore task thread info */ |
| |
| /* restore rfi target address*/ |
| ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10 |
| tophys_r1 %r10 |
| ldd TASK_PT_GR11(%r10), %r11 |
| tovirt_r1 %sp |
| #endif |
| |
| /* PARANOID: clear user scratch/user space SR's */ |
| mtsp %r0,%sr0 |
| mtsp %r0,%sr1 |
| mtsp %r0,%sr2 |
| mtsp %r0,%sr3 |
| |
| /* Initialize Protection Registers */ |
| mtctl %r0,%cr8 |
| mtctl %r0,%cr9 |
| mtctl %r0,%cr12 |
| mtctl %r0,%cr13 |
| |
| /* Initialize the global data pointer */ |
| loadgp |
| |
| /* Set up our interrupt table. HPMCs might not work after this! |
| * |
| * We need to install the correct iva for PA1.1 or PA2.0. The |
| * following short sequence of instructions can determine this |
| * (without being illegal on a PA1.1 machine). |
| */ |
| #ifndef CONFIG_64BIT |
| ldi 32,%r10 |
| mtctl %r10,%cr11 |
| .level 2.0 |
| mfctl,w %cr11,%r10 |
| .level 1.1 |
| comib,<>,n 0,%r10,$is_pa20 |
| ldil L%PA(fault_vector_11),%r10 |
| b $install_iva |
| ldo R%PA(fault_vector_11)(%r10),%r10 |
| |
| $is_pa20: |
| .level PA_ASM_LEVEL /* restore 1.1 || 2.0w */ |
| #endif /*!CONFIG_64BIT*/ |
| load32 PA(fault_vector_20),%r10 |
| |
| $install_iva: |
| mtctl %r10,%cr14 |
| |
| b aligned_rfi /* Prepare to RFI! Man all the cannons! */ |
| nop |
| |
| .align 128 |
| aligned_rfi: |
| pcxt_ssm_bug |
| |
| copy %r3, %arg0 /* PDCE_PROC for smp_callin() */ |
| |
| rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */ |
| /* Don't need NOPs, have 8 compliant insn before rfi */ |
| |
| mtctl %r0,%cr17 /* Clear IIASQ tail */ |
| mtctl %r0,%cr17 /* Clear IIASQ head */ |
| |
| /* Load RFI target into PC queue */ |
| mtctl %r11,%cr18 /* IIAOQ head */ |
| ldo 4(%r11),%r11 |
| mtctl %r11,%cr18 /* IIAOQ tail */ |
| |
| load32 KERNEL_PSW,%r10 |
| mtctl %r10,%ipsw |
| |
| /* Jump through hyperspace to Virt Mode */ |
| rfi |
| nop |
| |
| .procend |
| |
| #ifdef CONFIG_SMP |
| |
| .import smp_init_current_idle_task,data |
| .import smp_callin,code |
| |
| #ifndef CONFIG_64BIT |
| smp_callin_rtn: |
| .proc |
| .callinfo |
| break 1,1 /* Break if returned from start_secondary */ |
| nop |
| nop |
| .procend |
| #endif /*!CONFIG_64BIT*/ |
| |
| /*************************************************************************** |
| * smp_slave_stext is executed by all non-monarch Processors when the Monarch |
| * pokes the slave CPUs in smp.c:smp_boot_cpus(). |
| * |
| * Once here, registers values are initialized in order to branch to virtual |
| * mode. Once all available/eligible CPUs are in virtual mode, all are |
| * released and start out by executing their own idle task. |
| *****************************************************************************/ |
| smp_slave_stext: |
| .proc |
| .callinfo |
| |
| /* |
| ** Initialize Space registers |
| */ |
| mtsp %r0,%sr4 |
| mtsp %r0,%sr5 |
| mtsp %r0,%sr6 |
| mtsp %r0,%sr7 |
| |
| #ifdef CONFIG_64BIT |
| /* |
| * Enable Wide mode early, in case the task_struct for the idle |
| * task in smp_init_current_idle_task was allocated above 4GB. |
| */ |
| 1: mfia %rp /* clear upper part of pcoq */ |
| ldo 2f-1b(%rp),%rp |
| depdi 0,31,32,%rp |
| bv (%rp) |
| ssm PSW_SM_W,%r0 |
| 2: |
| #endif |
| |
| /* Initialize the SP - monarch sets up smp_init_current_idle_task */ |
| load32 PA(smp_init_current_idle_task),%sp |
| LDREG 0(%sp),%sp /* load task address */ |
| tophys_r1 %sp |
| LDREG TASK_THREAD_INFO(%sp),%sp |
| mtctl %sp,%cr30 /* store in cr30 */ |
| ldo THREAD_SZ_ALGN(%sp),%sp |
| |
| /* point CPU to kernel page tables */ |
| load32 PA(swapper_pg_dir),%r4 |
| mtctl %r4,%cr24 /* Initialize kernel root pointer */ |
| mtctl %r4,%cr25 /* Initialize user root pointer */ |
| |
| #ifdef CONFIG_64BIT |
| /* Setup PDCE_PROC entry */ |
| copy %arg0,%r3 |
| #else |
| /* Load RFI *return* address in case smp_callin bails */ |
| load32 smp_callin_rtn,%r2 |
| #endif |
| |
| /* Load RFI target address. */ |
| load32 smp_callin,%r11 |
| |
| /* ok...common code can handle the rest */ |
| b common_stext |
| nop |
| |
| .procend |
| #endif /* CONFIG_SMP */ |
| |
| ENDPROC(parisc_kernel_start) |
| |
| #ifndef CONFIG_64BIT |
| .section .data..ro_after_init |
| |
| .align 4 |
| .export $global$,data |
| |
| .type $global$,@object |
| .size $global$,4 |
| $global$: |
| .word 0 |
| #endif /*!CONFIG_64BIT*/ |
