| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Hardware monitoring driver for LTC2978 and compatible chips. |
| * |
| * Copyright (c) 2011 Ericsson AB. |
| * Copyright (c) 2013, 2014, 2015 Guenter Roeck |
| * Copyright (c) 2015 Linear Technology |
| * Copyright (c) 2018 Analog Devices Inc. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/jiffies.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/regulator/driver.h> |
| #include "pmbus.h" |
| |
| enum chips { |
| /* Managers */ |
| ltc2972, ltc2974, ltc2975, ltc2977, ltc2978, ltc2979, ltc2980, |
| /* Controllers */ |
| ltc3880, ltc3882, ltc3883, ltc3884, ltc3886, ltc3887, ltc3889, ltc7880, |
| /* Modules */ |
| ltm2987, ltm4664, ltm4675, ltm4676, ltm4677, ltm4678, ltm4680, ltm4686, |
| ltm4700, |
| }; |
| |
| /* Common for all chips */ |
| #define LTC2978_MFR_VOUT_PEAK 0xdd |
| #define LTC2978_MFR_VIN_PEAK 0xde |
| #define LTC2978_MFR_TEMPERATURE_PEAK 0xdf |
| #define LTC2978_MFR_SPECIAL_ID 0xe7 /* Undocumented on LTC3882 */ |
| #define LTC2978_MFR_COMMON 0xef |
| |
| /* LTC2974, LTC2975, LCT2977, LTC2980, LTC2978, and LTM2987 */ |
| #define LTC2978_MFR_VOUT_MIN 0xfb |
| #define LTC2978_MFR_VIN_MIN 0xfc |
| #define LTC2978_MFR_TEMPERATURE_MIN 0xfd |
| |
| /* LTC2974, LTC2975 */ |
| #define LTC2974_MFR_IOUT_PEAK 0xd7 |
| #define LTC2974_MFR_IOUT_MIN 0xd8 |
| |
| /* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */ |
| #define LTC3880_MFR_IOUT_PEAK 0xd7 |
| #define LTC3880_MFR_CLEAR_PEAKS 0xe3 |
| #define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4 |
| |
| /* LTC3883, LTC3884, LTC3886, LTC3889 and LTC7880 only */ |
| #define LTC3883_MFR_IIN_PEAK 0xe1 |
| |
| |
| /* LTC2975 only */ |
| #define LTC2975_MFR_IIN_PEAK 0xc4 |
| #define LTC2975_MFR_IIN_MIN 0xc5 |
| #define LTC2975_MFR_PIN_PEAK 0xc6 |
| #define LTC2975_MFR_PIN_MIN 0xc7 |
| |
| #define LTC2978_ID_MASK 0xfff0 |
| |
| #define LTC2972_ID 0x0310 |
| #define LTC2974_ID 0x0210 |
| #define LTC2975_ID 0x0220 |
| #define LTC2977_ID 0x0130 |
| #define LTC2978_ID_REV1 0x0110 /* Early revision */ |
| #define LTC2978_ID_REV2 0x0120 |
| #define LTC2979_ID_A 0x8060 |
| #define LTC2979_ID_B 0x8070 |
| #define LTC2980_ID_A 0x8030 /* A/B for two die IDs */ |
| #define LTC2980_ID_B 0x8040 |
| #define LTC3880_ID 0x4020 |
| #define LTC3882_ID 0x4200 |
| #define LTC3882_ID_D1 0x4240 /* Dash 1 */ |
| #define LTC3883_ID 0x4300 |
| #define LTC3884_ID 0x4C00 |
| #define LTC3886_ID 0x4600 |
| #define LTC3887_ID 0x4700 |
| #define LTM2987_ID_A 0x8010 /* A/B for two die IDs */ |
| #define LTM2987_ID_B 0x8020 |
| #define LTC3889_ID 0x4900 |
| #define LTC7880_ID 0x49E0 |
| #define LTM4664_ID 0x4120 |
| #define LTM4675_ID 0x47a0 |
| #define LTM4676_ID_REV1 0x4400 |
| #define LTM4676_ID_REV2 0x4480 |
| #define LTM4676A_ID 0x47e0 |
| #define LTM4677_ID_REV1 0x47B0 |
| #define LTM4677_ID_REV2 0x47D0 |
| #define LTM4678_ID_REV1 0x4100 |
| #define LTM4678_ID_REV2 0x4110 |
| #define LTM4680_ID 0x4140 |
| #define LTM4686_ID 0x4770 |
| #define LTM4700_ID 0x4130 |
| |
| #define LTC2972_NUM_PAGES 2 |
| #define LTC2974_NUM_PAGES 4 |
| #define LTC2978_NUM_PAGES 8 |
| #define LTC3880_NUM_PAGES 2 |
| #define LTC3883_NUM_PAGES 1 |
| |
| #define LTC_POLL_TIMEOUT 100 /* in milli-seconds */ |
| |
| #define LTC_NOT_BUSY BIT(6) |
| #define LTC_NOT_PENDING BIT(5) |
| |
| /* |
| * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which |
| * happens pretty much each time chip data is updated. Raw peak data therefore |
| * does not provide much value. To be able to provide useful peak data, keep an |
| * internal cache of measured peak data, which is only cleared if an explicit |
| * "clear peak" command is executed for the sensor in question. |
| */ |
| |
| struct ltc2978_data { |
| enum chips id; |
| u16 vin_min, vin_max; |
| u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES]; |
| u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES]; |
| u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES]; |
| u16 iin_min, iin_max; |
| u16 pin_min, pin_max; |
| u16 temp2_max; |
| struct pmbus_driver_info info; |
| u32 features; |
| }; |
| #define to_ltc2978_data(x) container_of(x, struct ltc2978_data, info) |
| |
| #define FEAT_CLEAR_PEAKS BIT(0) |
| #define FEAT_NEEDS_POLLING BIT(1) |
| |
| #define has_clear_peaks(d) ((d)->features & FEAT_CLEAR_PEAKS) |
| #define needs_polling(d) ((d)->features & FEAT_NEEDS_POLLING) |
| |
| static int ltc_wait_ready(struct i2c_client *client) |
| { |
| unsigned long timeout = jiffies + msecs_to_jiffies(LTC_POLL_TIMEOUT); |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int status; |
| u8 mask; |
| |
| if (!needs_polling(data)) |
| return 0; |
| |
| /* |
| * LTC3883 does not support LTC_NOT_PENDING, even though |
| * the datasheet claims that it does. |
| */ |
| mask = LTC_NOT_BUSY; |
| if (data->id != ltc3883) |
| mask |= LTC_NOT_PENDING; |
| |
| do { |
| status = pmbus_read_byte_data(client, 0, LTC2978_MFR_COMMON); |
| if (status == -EBADMSG || status == -ENXIO) { |
| /* PEC error or NACK: chip may be busy, try again */ |
| usleep_range(50, 100); |
| continue; |
| } |
| if (status < 0) |
| return status; |
| |
| if ((status & mask) == mask) |
| return 0; |
| |
| usleep_range(50, 100); |
| } while (time_before(jiffies, timeout)); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int ltc_read_word_data(struct i2c_client *client, int page, int phase, |
| int reg) |
| { |
| int ret; |
| |
| ret = ltc_wait_ready(client); |
| if (ret < 0) |
| return ret; |
| |
| return pmbus_read_word_data(client, page, 0xff, reg); |
| } |
| |
| static int ltc_read_byte_data(struct i2c_client *client, int page, int reg) |
| { |
| int ret; |
| |
| ret = ltc_wait_ready(client); |
| if (ret < 0) |
| return ret; |
| |
| return pmbus_read_byte_data(client, page, reg); |
| } |
| |
| static int ltc_write_byte(struct i2c_client *client, int page, u8 byte) |
| { |
| int ret; |
| |
| ret = ltc_wait_ready(client); |
| if (ret < 0) |
| return ret; |
| |
| return pmbus_write_byte(client, page, byte); |
| } |
| |
| static inline int lin11_to_val(int data) |
| { |
| s16 e = ((s16)data) >> 11; |
| s32 m = (((s16)(data << 5)) >> 5); |
| |
| /* |
| * mantissa is 10 bit + sign, exponent adds up to 15 bit. |
| * Add 6 bit to exponent for maximum accuracy (10 + 15 + 6 = 31). |
| */ |
| e += 6; |
| return (e < 0 ? m >> -e : m << e); |
| } |
| |
| static int ltc_get_max(struct ltc2978_data *data, struct i2c_client *client, |
| int page, int reg, u16 *pmax) |
| { |
| int ret; |
| |
| ret = ltc_read_word_data(client, page, 0xff, reg); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) > lin11_to_val(*pmax)) |
| *pmax = ret; |
| ret = *pmax; |
| } |
| return ret; |
| } |
| |
| static int ltc_get_min(struct ltc2978_data *data, struct i2c_client *client, |
| int page, int reg, u16 *pmin) |
| { |
| int ret; |
| |
| ret = ltc_read_word_data(client, page, 0xff, reg); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) < lin11_to_val(*pmin)) |
| *pmin = ret; |
| ret = *pmin; |
| } |
| return ret; |
| } |
| |
| static int ltc2978_read_word_data_common(struct i2c_client *client, int page, |
| int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_VIN_MAX: |
| ret = ltc_get_max(data, client, page, LTC2978_MFR_VIN_PEAK, |
| &data->vin_max); |
| break; |
| case PMBUS_VIRT_READ_VOUT_MAX: |
| ret = ltc_read_word_data(client, page, 0xff, |
| LTC2978_MFR_VOUT_PEAK); |
| if (ret >= 0) { |
| /* |
| * VOUT is 16 bit unsigned with fixed exponent, |
| * so we can compare it directly |
| */ |
| if (ret > data->vout_max[page]) |
| data->vout_max[page] = ret; |
| ret = data->vout_max[page]; |
| } |
| break; |
| case PMBUS_VIRT_READ_TEMP_MAX: |
| ret = ltc_get_max(data, client, page, |
| LTC2978_MFR_TEMPERATURE_PEAK, |
| &data->temp_max[page]); |
| break; |
| case PMBUS_VIRT_RESET_VOUT_HISTORY: |
| case PMBUS_VIRT_RESET_VIN_HISTORY: |
| case PMBUS_VIRT_RESET_TEMP_HISTORY: |
| ret = 0; |
| break; |
| default: |
| ret = ltc_wait_ready(client); |
| if (ret < 0) |
| return ret; |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc2978_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_VIN_MIN: |
| ret = ltc_get_min(data, client, page, LTC2978_MFR_VIN_MIN, |
| &data->vin_min); |
| break; |
| case PMBUS_VIRT_READ_VOUT_MIN: |
| ret = ltc_read_word_data(client, page, phase, |
| LTC2978_MFR_VOUT_MIN); |
| if (ret >= 0) { |
| /* |
| * VOUT_MIN is known to not be supported on some lots |
| * of LTC2978 revision 1, and will return the maximum |
| * possible voltage if read. If VOUT_MAX is valid and |
| * lower than the reading of VOUT_MIN, use it instead. |
| */ |
| if (data->vout_max[page] && ret > data->vout_max[page]) |
| ret = data->vout_max[page]; |
| if (ret < data->vout_min[page]) |
| data->vout_min[page] = ret; |
| ret = data->vout_min[page]; |
| } |
| break; |
| case PMBUS_VIRT_READ_TEMP_MIN: |
| ret = ltc_get_min(data, client, page, |
| LTC2978_MFR_TEMPERATURE_MIN, |
| &data->temp_min[page]); |
| break; |
| case PMBUS_VIRT_READ_IOUT_MAX: |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| case PMBUS_VIRT_READ_TEMP2_MAX: |
| case PMBUS_VIRT_RESET_TEMP2_HISTORY: |
| ret = -ENXIO; |
| break; |
| default: |
| ret = ltc2978_read_word_data_common(client, page, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc2974_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_IOUT_MAX: |
| ret = ltc_get_max(data, client, page, LTC2974_MFR_IOUT_PEAK, |
| &data->iout_max[page]); |
| break; |
| case PMBUS_VIRT_READ_IOUT_MIN: |
| ret = ltc_get_min(data, client, page, LTC2974_MFR_IOUT_MIN, |
| &data->iout_min[page]); |
| break; |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| ret = 0; |
| break; |
| default: |
| ret = ltc2978_read_word_data(client, page, phase, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc2975_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_IIN_MAX: |
| ret = ltc_get_max(data, client, page, LTC2975_MFR_IIN_PEAK, |
| &data->iin_max); |
| break; |
| case PMBUS_VIRT_READ_IIN_MIN: |
| ret = ltc_get_min(data, client, page, LTC2975_MFR_IIN_MIN, |
| &data->iin_min); |
| break; |
| case PMBUS_VIRT_READ_PIN_MAX: |
| ret = ltc_get_max(data, client, page, LTC2975_MFR_PIN_PEAK, |
| &data->pin_max); |
| break; |
| case PMBUS_VIRT_READ_PIN_MIN: |
| ret = ltc_get_min(data, client, page, LTC2975_MFR_PIN_MIN, |
| &data->pin_min); |
| break; |
| case PMBUS_VIRT_RESET_IIN_HISTORY: |
| case PMBUS_VIRT_RESET_PIN_HISTORY: |
| ret = 0; |
| break; |
| default: |
| ret = ltc2978_read_word_data(client, page, phase, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc3880_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_IOUT_MAX: |
| ret = ltc_get_max(data, client, page, LTC3880_MFR_IOUT_PEAK, |
| &data->iout_max[page]); |
| break; |
| case PMBUS_VIRT_READ_TEMP2_MAX: |
| ret = ltc_get_max(data, client, page, |
| LTC3880_MFR_TEMPERATURE2_PEAK, |
| &data->temp2_max); |
| break; |
| case PMBUS_VIRT_READ_VIN_MIN: |
| case PMBUS_VIRT_READ_VOUT_MIN: |
| case PMBUS_VIRT_READ_TEMP_MIN: |
| ret = -ENXIO; |
| break; |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| case PMBUS_VIRT_RESET_TEMP2_HISTORY: |
| ret = 0; |
| break; |
| default: |
| ret = ltc2978_read_word_data_common(client, page, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc3883_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_IIN_MAX: |
| ret = ltc_get_max(data, client, page, LTC3883_MFR_IIN_PEAK, |
| &data->iin_max); |
| break; |
| case PMBUS_VIRT_RESET_IIN_HISTORY: |
| ret = 0; |
| break; |
| default: |
| ret = ltc3880_read_word_data(client, page, phase, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc2978_clear_peaks(struct ltc2978_data *data, |
| struct i2c_client *client, int page) |
| { |
| int ret; |
| |
| if (has_clear_peaks(data)) |
| ret = ltc_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS); |
| else |
| ret = ltc_write_byte(client, page, PMBUS_CLEAR_FAULTS); |
| |
| return ret; |
| } |
| |
| static int ltc2978_write_word_data(struct i2c_client *client, int page, |
| int reg, u16 word) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_RESET_IIN_HISTORY: |
| data->iin_max = 0x7c00; |
| data->iin_min = 0x7bff; |
| ret = ltc2978_clear_peaks(data, client, 0); |
| break; |
| case PMBUS_VIRT_RESET_PIN_HISTORY: |
| data->pin_max = 0x7c00; |
| data->pin_min = 0x7bff; |
| ret = ltc2978_clear_peaks(data, client, 0); |
| break; |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| data->iout_max[page] = 0x7c00; |
| data->iout_min[page] = 0xfbff; |
| ret = ltc2978_clear_peaks(data, client, page); |
| break; |
| case PMBUS_VIRT_RESET_TEMP2_HISTORY: |
| data->temp2_max = 0x7c00; |
| ret = ltc2978_clear_peaks(data, client, page); |
| break; |
| case PMBUS_VIRT_RESET_VOUT_HISTORY: |
| data->vout_min[page] = 0xffff; |
| data->vout_max[page] = 0; |
| ret = ltc2978_clear_peaks(data, client, page); |
| break; |
| case PMBUS_VIRT_RESET_VIN_HISTORY: |
| data->vin_min = 0x7bff; |
| data->vin_max = 0x7c00; |
| ret = ltc2978_clear_peaks(data, client, page); |
| break; |
| case PMBUS_VIRT_RESET_TEMP_HISTORY: |
| data->temp_min[page] = 0x7bff; |
| data->temp_max[page] = 0x7c00; |
| ret = ltc2978_clear_peaks(data, client, page); |
| break; |
| default: |
| ret = ltc_wait_ready(client); |
| if (ret < 0) |
| return ret; |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| static const struct i2c_device_id ltc2978_id[] = { |
| {"ltc2972", ltc2972}, |
| {"ltc2974", ltc2974}, |
| {"ltc2975", ltc2975}, |
| {"ltc2977", ltc2977}, |
| {"ltc2978", ltc2978}, |
| {"ltc2979", ltc2979}, |
| {"ltc2980", ltc2980}, |
| {"ltc3880", ltc3880}, |
| {"ltc3882", ltc3882}, |
| {"ltc3883", ltc3883}, |
| {"ltc3884", ltc3884}, |
| {"ltc3886", ltc3886}, |
| {"ltc3887", ltc3887}, |
| {"ltc3889", ltc3889}, |
| {"ltc7880", ltc7880}, |
| {"ltm2987", ltm2987}, |
| {"ltm4664", ltm4664}, |
| {"ltm4675", ltm4675}, |
| {"ltm4676", ltm4676}, |
| {"ltm4677", ltm4677}, |
| {"ltm4678", ltm4678}, |
| {"ltm4680", ltm4680}, |
| {"ltm4686", ltm4686}, |
| {"ltm4700", ltm4700}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ltc2978_id); |
| |
| #if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR) |
| static const struct regulator_desc ltc2978_reg_desc[] = { |
| PMBUS_REGULATOR("vout", 0), |
| PMBUS_REGULATOR("vout", 1), |
| PMBUS_REGULATOR("vout", 2), |
| PMBUS_REGULATOR("vout", 3), |
| PMBUS_REGULATOR("vout", 4), |
| PMBUS_REGULATOR("vout", 5), |
| PMBUS_REGULATOR("vout", 6), |
| PMBUS_REGULATOR("vout", 7), |
| }; |
| #endif /* CONFIG_SENSORS_LTC2978_REGULATOR */ |
| |
| static int ltc2978_get_id(struct i2c_client *client) |
| { |
| int chip_id; |
| |
| chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID); |
| if (chip_id < 0) { |
| const struct i2c_device_id *id; |
| u8 buf[I2C_SMBUS_BLOCK_MAX]; |
| int ret; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_READ_BLOCK_DATA)) |
| return -ENODEV; |
| |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf); |
| if (ret < 0) |
| return ret; |
| if (ret < 3 || strncmp(buf, "LTC", 3)) |
| return -ENODEV; |
| |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); |
| if (ret < 0) |
| return ret; |
| for (id = <c2978_id[0]; strlen(id->name); id++) { |
| if (!strncasecmp(id->name, buf, strlen(id->name))) |
| return (int)id->driver_data; |
| } |
| return -ENODEV; |
| } |
| |
| chip_id &= LTC2978_ID_MASK; |
| |
| if (chip_id == LTC2972_ID) |
| return ltc2972; |
| else if (chip_id == LTC2974_ID) |
| return ltc2974; |
| else if (chip_id == LTC2975_ID) |
| return ltc2975; |
| else if (chip_id == LTC2977_ID) |
| return ltc2977; |
| else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) |
| return ltc2978; |
| else if (chip_id == LTC2979_ID_A || chip_id == LTC2979_ID_B) |
| return ltc2979; |
| else if (chip_id == LTC2980_ID_A || chip_id == LTC2980_ID_B) |
| return ltc2980; |
| else if (chip_id == LTC3880_ID) |
| return ltc3880; |
| else if (chip_id == LTC3882_ID || chip_id == LTC3882_ID_D1) |
| return ltc3882; |
| else if (chip_id == LTC3883_ID) |
| return ltc3883; |
| else if (chip_id == LTC3884_ID) |
| return ltc3884; |
| else if (chip_id == LTC3886_ID) |
| return ltc3886; |
| else if (chip_id == LTC3887_ID) |
| return ltc3887; |
| else if (chip_id == LTC3889_ID) |
| return ltc3889; |
| else if (chip_id == LTC7880_ID) |
| return ltc7880; |
| else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B) |
| return ltm2987; |
| else if (chip_id == LTM4664_ID) |
| return ltm4664; |
| else if (chip_id == LTM4675_ID) |
| return ltm4675; |
| else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 || |
| chip_id == LTM4676A_ID) |
| return ltm4676; |
| else if (chip_id == LTM4677_ID_REV1 || chip_id == LTM4677_ID_REV2) |
| return ltm4677; |
| else if (chip_id == LTM4678_ID_REV1 || chip_id == LTM4678_ID_REV2) |
| return ltm4678; |
| else if (chip_id == LTM4680_ID) |
| return ltm4680; |
| else if (chip_id == LTM4686_ID) |
| return ltm4686; |
| else if (chip_id == LTM4700_ID) |
| return ltm4700; |
| |
| dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id); |
| return -ENODEV; |
| } |
| |
| static int ltc2978_probe(struct i2c_client *client) |
| { |
| int i, chip_id; |
| struct ltc2978_data *data; |
| struct pmbus_driver_info *info; |
| const struct i2c_device_id *id; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_READ_WORD_DATA)) |
| return -ENODEV; |
| |
| data = devm_kzalloc(&client->dev, sizeof(struct ltc2978_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| chip_id = ltc2978_get_id(client); |
| if (chip_id < 0) |
| return chip_id; |
| |
| data->id = chip_id; |
| id = i2c_match_id(ltc2978_id, client); |
| if (data->id != id->driver_data) |
| dev_warn(&client->dev, |
| "Device mismatch: Configured %s (%d), detected %d\n", |
| id->name, |
| (int) id->driver_data, |
| chip_id); |
| |
| info = &data->info; |
| info->write_word_data = ltc2978_write_word_data; |
| info->write_byte = ltc_write_byte; |
| info->read_word_data = ltc_read_word_data; |
| info->read_byte_data = ltc_read_byte_data; |
| |
| data->vin_min = 0x7bff; |
| data->vin_max = 0x7c00; |
| for (i = 0; i < ARRAY_SIZE(data->vout_min); i++) |
| data->vout_min[i] = 0xffff; |
| for (i = 0; i < ARRAY_SIZE(data->iout_min); i++) |
| data->iout_min[i] = 0xfbff; |
| for (i = 0; i < ARRAY_SIZE(data->iout_max); i++) |
| data->iout_max[i] = 0x7c00; |
| for (i = 0; i < ARRAY_SIZE(data->temp_min); i++) |
| data->temp_min[i] = 0x7bff; |
| for (i = 0; i < ARRAY_SIZE(data->temp_max); i++) |
| data->temp_max[i] = 0x7c00; |
| data->temp2_max = 0x7c00; |
| |
| switch (data->id) { |
| case ltc2972: |
| info->read_word_data = ltc2975_read_word_data; |
| info->pages = LTC2972_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
| | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_TEMP2; |
| for (i = 0; i < info->pages; i++) { |
| info->func[i] |= PMBUS_HAVE_VOUT |
| | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; |
| } |
| break; |
| case ltc2974: |
| info->read_word_data = ltc2974_read_word_data; |
| info->pages = LTC2974_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_TEMP2; |
| for (i = 0; i < info->pages; i++) { |
| info->func[i] |= PMBUS_HAVE_VOUT |
| | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; |
| } |
| break; |
| case ltc2975: |
| info->read_word_data = ltc2975_read_word_data; |
| info->pages = LTC2974_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
| | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_TEMP2; |
| for (i = 0; i < info->pages; i++) { |
| info->func[i] |= PMBUS_HAVE_VOUT |
| | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; |
| } |
| break; |
| |
| case ltc2977: |
| case ltc2978: |
| case ltc2979: |
| case ltc2980: |
| case ltm2987: |
| info->read_word_data = ltc2978_read_word_data; |
| info->pages = LTC2978_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; |
| for (i = 1; i < LTC2978_NUM_PAGES; i++) { |
| info->func[i] = PMBUS_HAVE_VOUT |
| | PMBUS_HAVE_STATUS_VOUT; |
| } |
| break; |
| case ltc3880: |
| case ltc3887: |
| case ltm4675: |
| case ltm4676: |
| case ltm4677: |
| case ltm4686: |
| data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING; |
| info->read_word_data = ltc3880_read_word_data; |
| info->pages = LTC3880_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
| | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
| | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; |
| info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; |
| break; |
| case ltc3882: |
| data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING; |
| info->read_word_data = ltc3880_read_word_data; |
| info->pages = LTC3880_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN |
| | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
| | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; |
| info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; |
| break; |
| case ltc3883: |
| data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING; |
| info->read_word_data = ltc3883_read_word_data; |
| info->pages = LTC3883_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
| | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
| | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; |
| break; |
| case ltc3884: |
| case ltc3886: |
| case ltc3889: |
| case ltc7880: |
| case ltm4664: |
| case ltm4678: |
| case ltm4680: |
| case ltm4700: |
| data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING; |
| info->read_word_data = ltc3883_read_word_data; |
| info->pages = LTC3880_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
| | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
| | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; |
| info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| #if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR) |
| info->num_regulators = info->pages; |
| info->reg_desc = ltc2978_reg_desc; |
| if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) { |
| dev_err(&client->dev, "num_regulators too large!"); |
| info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc); |
| } |
| #endif |
| |
| return pmbus_do_probe(client, info); |
| } |
| |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id ltc2978_of_match[] = { |
| { .compatible = "lltc,ltc2972" }, |
| { .compatible = "lltc,ltc2974" }, |
| { .compatible = "lltc,ltc2975" }, |
| { .compatible = "lltc,ltc2977" }, |
| { .compatible = "lltc,ltc2978" }, |
| { .compatible = "lltc,ltc2979" }, |
| { .compatible = "lltc,ltc2980" }, |
| { .compatible = "lltc,ltc3880" }, |
| { .compatible = "lltc,ltc3882" }, |
| { .compatible = "lltc,ltc3883" }, |
| { .compatible = "lltc,ltc3884" }, |
| { .compatible = "lltc,ltc3886" }, |
| { .compatible = "lltc,ltc3887" }, |
| { .compatible = "lltc,ltc3889" }, |
| { .compatible = "lltc,ltc7880" }, |
| { .compatible = "lltc,ltm2987" }, |
| { .compatible = "lltc,ltm4664" }, |
| { .compatible = "lltc,ltm4675" }, |
| { .compatible = "lltc,ltm4676" }, |
| { .compatible = "lltc,ltm4677" }, |
| { .compatible = "lltc,ltm4678" }, |
| { .compatible = "lltc,ltm4680" }, |
| { .compatible = "lltc,ltm4686" }, |
| { .compatible = "lltc,ltm4700" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, ltc2978_of_match); |
| #endif |
| |
| static struct i2c_driver ltc2978_driver = { |
| .driver = { |
| .name = "ltc2978", |
| .of_match_table = of_match_ptr(ltc2978_of_match), |
| }, |
| .probe_new = ltc2978_probe, |
| .id_table = ltc2978_id, |
| }; |
| |
| module_i2c_driver(ltc2978_driver); |
| |
| MODULE_AUTHOR("Guenter Roeck"); |
| MODULE_DESCRIPTION("PMBus driver for LTC2978 and compatible chips"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(PMBUS); |