| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * Copyright (C) 2004-2016 Synopsys, Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The names of the above-listed copyright holders may not be used |
| * to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation; either version 2 of the License, or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS |
| * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| |
| #include "core.h" |
| |
| static void dwc2_set_bcm_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->host_rx_fifo_size = 774; |
| p->max_transfer_size = 65535; |
| p->max_packet_count = 511; |
| p->ahbcfg = 0x10; |
| } |
| |
| static void dwc2_set_his_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; |
| p->speed = DWC2_SPEED_PARAM_HIGH; |
| p->host_rx_fifo_size = 512; |
| p->host_nperio_tx_fifo_size = 512; |
| p->host_perio_tx_fifo_size = 512; |
| p->max_transfer_size = 65535; |
| p->max_packet_count = 511; |
| p->host_channels = 16; |
| p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; |
| p->phy_utmi_width = 8; |
| p->i2c_enable = false; |
| p->reload_ctl = false; |
| p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << |
| GAHBCFG_HBSTLEN_SHIFT; |
| p->change_speed_quirk = true; |
| p->power_down = DWC2_POWER_DOWN_PARAM_NONE; |
| } |
| |
| static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->power_down = DWC2_POWER_DOWN_PARAM_NONE; |
| p->no_clock_gating = true; |
| p->phy_utmi_width = 8; |
| } |
| |
| static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; |
| p->host_rx_fifo_size = 525; |
| p->host_nperio_tx_fifo_size = 128; |
| p->host_perio_tx_fifo_size = 256; |
| p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << |
| GAHBCFG_HBSTLEN_SHIFT; |
| p->power_down = DWC2_POWER_DOWN_PARAM_NONE; |
| } |
| |
| static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->otg_cap = 2; |
| p->host_rx_fifo_size = 288; |
| p->host_nperio_tx_fifo_size = 128; |
| p->host_perio_tx_fifo_size = 96; |
| p->max_transfer_size = 65535; |
| p->max_packet_count = 511; |
| p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << |
| GAHBCFG_HBSTLEN_SHIFT; |
| } |
| |
| static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; |
| p->speed = DWC2_SPEED_PARAM_HIGH; |
| p->host_rx_fifo_size = 512; |
| p->host_nperio_tx_fifo_size = 500; |
| p->host_perio_tx_fifo_size = 500; |
| p->host_channels = 16; |
| p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; |
| p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << |
| GAHBCFG_HBSTLEN_SHIFT; |
| p->power_down = DWC2_POWER_DOWN_PARAM_NONE; |
| } |
| |
| static void dwc2_set_amlogic_g12a_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->lpm = false; |
| p->lpm_clock_gating = false; |
| p->besl = false; |
| p->hird_threshold_en = false; |
| } |
| |
| static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; |
| } |
| |
| static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; |
| p->speed = DWC2_SPEED_PARAM_FULL; |
| p->host_rx_fifo_size = 128; |
| p->host_nperio_tx_fifo_size = 96; |
| p->host_perio_tx_fifo_size = 96; |
| p->max_packet_count = 256; |
| p->phy_type = DWC2_PHY_TYPE_PARAM_FS; |
| p->i2c_enable = false; |
| p->activate_stm_fs_transceiver = true; |
| } |
| |
| static void dwc2_set_stm32f7_hsotg_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->host_rx_fifo_size = 622; |
| p->host_nperio_tx_fifo_size = 128; |
| p->host_perio_tx_fifo_size = 256; |
| } |
| |
| static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; |
| p->speed = DWC2_SPEED_PARAM_FULL; |
| p->host_rx_fifo_size = 128; |
| p->host_nperio_tx_fifo_size = 96; |
| p->host_perio_tx_fifo_size = 96; |
| p->max_packet_count = 256; |
| p->phy_type = DWC2_PHY_TYPE_PARAM_FS; |
| p->i2c_enable = false; |
| p->activate_stm_fs_transceiver = true; |
| p->activate_stm_id_vb_detection = true; |
| p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; |
| p->power_down = DWC2_POWER_DOWN_PARAM_NONE; |
| p->host_support_fs_ls_low_power = true; |
| p->host_ls_low_power_phy_clk = true; |
| } |
| |
| static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; |
| p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch"); |
| p->host_rx_fifo_size = 440; |
| p->host_nperio_tx_fifo_size = 256; |
| p->host_perio_tx_fifo_size = 256; |
| p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; |
| p->power_down = DWC2_POWER_DOWN_PARAM_NONE; |
| p->lpm = false; |
| p->lpm_clock_gating = false; |
| p->besl = false; |
| p->hird_threshold_en = false; |
| } |
| |
| const struct of_device_id dwc2_of_match_table[] = { |
| { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params }, |
| { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params }, |
| { .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params }, |
| { .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params }, |
| { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params }, |
| { .compatible = "snps,dwc2" }, |
| { .compatible = "samsung,s3c6400-hsotg", |
| .data = dwc2_set_s3c6400_params }, |
| { .compatible = "amlogic,meson8-usb", |
| .data = dwc2_set_amlogic_params }, |
| { .compatible = "amlogic,meson8b-usb", |
| .data = dwc2_set_amlogic_params }, |
| { .compatible = "amlogic,meson-gxbb-usb", |
| .data = dwc2_set_amlogic_params }, |
| { .compatible = "amlogic,meson-g12a-usb", |
| .data = dwc2_set_amlogic_g12a_params }, |
| { .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params }, |
| { .compatible = "apm,apm82181-dwc-otg", .data = dwc2_set_amcc_params }, |
| { .compatible = "st,stm32f4x9-fsotg", |
| .data = dwc2_set_stm32f4x9_fsotg_params }, |
| { .compatible = "st,stm32f4x9-hsotg" }, |
| { .compatible = "st,stm32f7-hsotg", |
| .data = dwc2_set_stm32f7_hsotg_params }, |
| { .compatible = "st,stm32mp15-fsotg", |
| .data = dwc2_set_stm32mp15_fsotg_params }, |
| { .compatible = "st,stm32mp15-hsotg", |
| .data = dwc2_set_stm32mp15_hsotg_params }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, dwc2_of_match_table); |
| |
| const struct acpi_device_id dwc2_acpi_match[] = { |
| { "BCM2848", (kernel_ulong_t)dwc2_set_bcm_params }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match); |
| |
| static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg) |
| { |
| u8 val; |
| |
| switch (hsotg->hw_params.op_mode) { |
| case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: |
| val = DWC2_CAP_PARAM_HNP_SRP_CAPABLE; |
| break; |
| case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: |
| case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: |
| case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: |
| val = DWC2_CAP_PARAM_SRP_ONLY_CAPABLE; |
| break; |
| default: |
| val = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; |
| break; |
| } |
| |
| hsotg->params.otg_cap = val; |
| } |
| |
| static void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg) |
| { |
| int val; |
| u32 hs_phy_type = hsotg->hw_params.hs_phy_type; |
| |
| val = DWC2_PHY_TYPE_PARAM_FS; |
| if (hs_phy_type != GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED) { |
| if (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI || |
| hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI) |
| val = DWC2_PHY_TYPE_PARAM_UTMI; |
| else |
| val = DWC2_PHY_TYPE_PARAM_ULPI; |
| } |
| |
| if (dwc2_is_fs_iot(hsotg)) |
| hsotg->params.phy_type = DWC2_PHY_TYPE_PARAM_FS; |
| |
| hsotg->params.phy_type = val; |
| } |
| |
| static void dwc2_set_param_speed(struct dwc2_hsotg *hsotg) |
| { |
| int val; |
| |
| val = hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS ? |
| DWC2_SPEED_PARAM_FULL : DWC2_SPEED_PARAM_HIGH; |
| |
| if (dwc2_is_fs_iot(hsotg)) |
| val = DWC2_SPEED_PARAM_FULL; |
| |
| if (dwc2_is_hs_iot(hsotg)) |
| val = DWC2_SPEED_PARAM_HIGH; |
| |
| hsotg->params.speed = val; |
| } |
| |
| static void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg) |
| { |
| int val; |
| |
| val = (hsotg->hw_params.utmi_phy_data_width == |
| GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16; |
| |
| if (hsotg->phy) { |
| /* |
| * If using the generic PHY framework, check if the PHY bus |
| * width is 8-bit and set the phyif appropriately. |
| */ |
| if (phy_get_bus_width(hsotg->phy) == 8) |
| val = 8; |
| } |
| |
| hsotg->params.phy_utmi_width = val; |
| } |
| |
| static void dwc2_set_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| int depth_average; |
| int fifo_count; |
| int i; |
| |
| fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); |
| |
| memset(p->g_tx_fifo_size, 0, sizeof(p->g_tx_fifo_size)); |
| depth_average = dwc2_hsotg_tx_fifo_average_depth(hsotg); |
| for (i = 1; i <= fifo_count; i++) |
| p->g_tx_fifo_size[i] = depth_average; |
| } |
| |
| static void dwc2_set_param_power_down(struct dwc2_hsotg *hsotg) |
| { |
| int val; |
| |
| if (hsotg->hw_params.hibernation) |
| val = DWC2_POWER_DOWN_PARAM_HIBERNATION; |
| else if (hsotg->hw_params.power_optimized) |
| val = DWC2_POWER_DOWN_PARAM_PARTIAL; |
| else |
| val = DWC2_POWER_DOWN_PARAM_NONE; |
| |
| hsotg->params.power_down = val; |
| } |
| |
| static void dwc2_set_param_lpm(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| |
| p->lpm = hsotg->hw_params.lpm_mode; |
| if (p->lpm) { |
| p->lpm_clock_gating = true; |
| p->besl = true; |
| p->hird_threshold_en = true; |
| p->hird_threshold = 4; |
| } else { |
| p->lpm_clock_gating = false; |
| p->besl = false; |
| p->hird_threshold_en = false; |
| } |
| } |
| |
| /** |
| * dwc2_set_default_params() - Set all core parameters to their |
| * auto-detected default values. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| * |
| */ |
| static void dwc2_set_default_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_hw_params *hw = &hsotg->hw_params; |
| struct dwc2_core_params *p = &hsotg->params; |
| bool dma_capable = !(hw->arch == GHWCFG2_SLAVE_ONLY_ARCH); |
| |
| dwc2_set_param_otg_cap(hsotg); |
| dwc2_set_param_phy_type(hsotg); |
| dwc2_set_param_speed(hsotg); |
| dwc2_set_param_phy_utmi_width(hsotg); |
| dwc2_set_param_power_down(hsotg); |
| dwc2_set_param_lpm(hsotg); |
| p->phy_ulpi_ddr = false; |
| p->phy_ulpi_ext_vbus = false; |
| |
| p->enable_dynamic_fifo = hw->enable_dynamic_fifo; |
| p->en_multiple_tx_fifo = hw->en_multiple_tx_fifo; |
| p->i2c_enable = hw->i2c_enable; |
| p->acg_enable = hw->acg_enable; |
| p->ulpi_fs_ls = false; |
| p->ts_dline = false; |
| p->reload_ctl = (hw->snpsid >= DWC2_CORE_REV_2_92a); |
| p->uframe_sched = true; |
| p->external_id_pin_ctl = false; |
| p->ipg_isoc_en = false; |
| p->service_interval = false; |
| p->max_packet_count = hw->max_packet_count; |
| p->max_transfer_size = hw->max_transfer_size; |
| p->ahbcfg = GAHBCFG_HBSTLEN_INCR << GAHBCFG_HBSTLEN_SHIFT; |
| p->ref_clk_per = 33333; |
| p->sof_cnt_wkup_alert = 100; |
| |
| if ((hsotg->dr_mode == USB_DR_MODE_HOST) || |
| (hsotg->dr_mode == USB_DR_MODE_OTG)) { |
| p->host_dma = dma_capable; |
| p->dma_desc_enable = false; |
| p->dma_desc_fs_enable = false; |
| p->host_support_fs_ls_low_power = false; |
| p->host_ls_low_power_phy_clk = false; |
| p->host_channels = hw->host_channels; |
| p->host_rx_fifo_size = hw->rx_fifo_size; |
| p->host_nperio_tx_fifo_size = hw->host_nperio_tx_fifo_size; |
| p->host_perio_tx_fifo_size = hw->host_perio_tx_fifo_size; |
| } |
| |
| if ((hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) || |
| (hsotg->dr_mode == USB_DR_MODE_OTG)) { |
| p->g_dma = dma_capable; |
| p->g_dma_desc = hw->dma_desc_enable; |
| |
| /* |
| * The values for g_rx_fifo_size (2048) and |
| * g_np_tx_fifo_size (1024) come from the legacy s3c |
| * gadget driver. These defaults have been hard-coded |
| * for some time so many platforms depend on these |
| * values. Leave them as defaults for now and only |
| * auto-detect if the hardware does not support the |
| * default. |
| */ |
| p->g_rx_fifo_size = 2048; |
| p->g_np_tx_fifo_size = 1024; |
| dwc2_set_param_tx_fifo_sizes(hsotg); |
| } |
| } |
| |
| /** |
| * dwc2_get_device_properties() - Read in device properties. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| * |
| * Read in the device properties and adjust core parameters if needed. |
| */ |
| static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_core_params *p = &hsotg->params; |
| int num; |
| |
| if ((hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) || |
| (hsotg->dr_mode == USB_DR_MODE_OTG)) { |
| device_property_read_u32(hsotg->dev, "g-rx-fifo-size", |
| &p->g_rx_fifo_size); |
| |
| device_property_read_u32(hsotg->dev, "g-np-tx-fifo-size", |
| &p->g_np_tx_fifo_size); |
| |
| num = device_property_count_u32(hsotg->dev, "g-tx-fifo-size"); |
| if (num > 0) { |
| num = min(num, 15); |
| memset(p->g_tx_fifo_size, 0, |
| sizeof(p->g_tx_fifo_size)); |
| device_property_read_u32_array(hsotg->dev, |
| "g-tx-fifo-size", |
| &p->g_tx_fifo_size[1], |
| num); |
| } |
| } |
| |
| if (of_find_property(hsotg->dev->of_node, "disable-over-current", NULL)) |
| p->oc_disable = true; |
| } |
| |
| static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg) |
| { |
| int valid = 1; |
| |
| switch (hsotg->params.otg_cap) { |
| case DWC2_CAP_PARAM_HNP_SRP_CAPABLE: |
| if (hsotg->hw_params.op_mode != GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) |
| valid = 0; |
| break; |
| case DWC2_CAP_PARAM_SRP_ONLY_CAPABLE: |
| switch (hsotg->hw_params.op_mode) { |
| case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: |
| case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: |
| case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: |
| case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: |
| break; |
| default: |
| valid = 0; |
| break; |
| } |
| break; |
| case DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE: |
| /* always valid */ |
| break; |
| default: |
| valid = 0; |
| break; |
| } |
| |
| if (!valid) |
| dwc2_set_param_otg_cap(hsotg); |
| } |
| |
| static void dwc2_check_param_phy_type(struct dwc2_hsotg *hsotg) |
| { |
| int valid = 0; |
| u32 hs_phy_type; |
| u32 fs_phy_type; |
| |
| hs_phy_type = hsotg->hw_params.hs_phy_type; |
| fs_phy_type = hsotg->hw_params.fs_phy_type; |
| |
| switch (hsotg->params.phy_type) { |
| case DWC2_PHY_TYPE_PARAM_FS: |
| if (fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) |
| valid = 1; |
| break; |
| case DWC2_PHY_TYPE_PARAM_UTMI: |
| if ((hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI) || |
| (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)) |
| valid = 1; |
| break; |
| case DWC2_PHY_TYPE_PARAM_ULPI: |
| if ((hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI) || |
| (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)) |
| valid = 1; |
| break; |
| default: |
| break; |
| } |
| |
| if (!valid) |
| dwc2_set_param_phy_type(hsotg); |
| } |
| |
| static void dwc2_check_param_speed(struct dwc2_hsotg *hsotg) |
| { |
| int valid = 1; |
| int phy_type = hsotg->params.phy_type; |
| int speed = hsotg->params.speed; |
| |
| switch (speed) { |
| case DWC2_SPEED_PARAM_HIGH: |
| if ((hsotg->params.speed == DWC2_SPEED_PARAM_HIGH) && |
| (phy_type == DWC2_PHY_TYPE_PARAM_FS)) |
| valid = 0; |
| break; |
| case DWC2_SPEED_PARAM_FULL: |
| case DWC2_SPEED_PARAM_LOW: |
| break; |
| default: |
| valid = 0; |
| break; |
| } |
| |
| if (!valid) |
| dwc2_set_param_speed(hsotg); |
| } |
| |
| static void dwc2_check_param_phy_utmi_width(struct dwc2_hsotg *hsotg) |
| { |
| int valid = 0; |
| int param = hsotg->params.phy_utmi_width; |
| int width = hsotg->hw_params.utmi_phy_data_width; |
| |
| switch (width) { |
| case GHWCFG4_UTMI_PHY_DATA_WIDTH_8: |
| valid = (param == 8); |
| break; |
| case GHWCFG4_UTMI_PHY_DATA_WIDTH_16: |
| valid = (param == 16); |
| break; |
| case GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16: |
| valid = (param == 8 || param == 16); |
| break; |
| } |
| |
| if (!valid) |
| dwc2_set_param_phy_utmi_width(hsotg); |
| } |
| |
| static void dwc2_check_param_power_down(struct dwc2_hsotg *hsotg) |
| { |
| int param = hsotg->params.power_down; |
| |
| switch (param) { |
| case DWC2_POWER_DOWN_PARAM_NONE: |
| break; |
| case DWC2_POWER_DOWN_PARAM_PARTIAL: |
| if (hsotg->hw_params.power_optimized) |
| break; |
| dev_dbg(hsotg->dev, |
| "Partial power down isn't supported by HW\n"); |
| param = DWC2_POWER_DOWN_PARAM_NONE; |
| break; |
| case DWC2_POWER_DOWN_PARAM_HIBERNATION: |
| if (hsotg->hw_params.hibernation) |
| break; |
| dev_dbg(hsotg->dev, |
| "Hibernation isn't supported by HW\n"); |
| param = DWC2_POWER_DOWN_PARAM_NONE; |
| break; |
| default: |
| dev_err(hsotg->dev, |
| "%s: Invalid parameter power_down=%d\n", |
| __func__, param); |
| param = DWC2_POWER_DOWN_PARAM_NONE; |
| break; |
| } |
| |
| hsotg->params.power_down = param; |
| } |
| |
| static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg) |
| { |
| int fifo_count; |
| int fifo; |
| int min; |
| u32 total = 0; |
| u32 dptxfszn; |
| |
| fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); |
| min = hsotg->hw_params.en_multiple_tx_fifo ? 16 : 4; |
| |
| for (fifo = 1; fifo <= fifo_count; fifo++) |
| total += hsotg->params.g_tx_fifo_size[fifo]; |
| |
| if (total > dwc2_hsotg_tx_fifo_total_depth(hsotg) || !total) { |
| dev_warn(hsotg->dev, "%s: Invalid parameter g-tx-fifo-size, setting to default average\n", |
| __func__); |
| dwc2_set_param_tx_fifo_sizes(hsotg); |
| } |
| |
| for (fifo = 1; fifo <= fifo_count; fifo++) { |
| dptxfszn = hsotg->hw_params.g_tx_fifo_size[fifo]; |
| |
| if (hsotg->params.g_tx_fifo_size[fifo] < min || |
| hsotg->params.g_tx_fifo_size[fifo] > dptxfszn) { |
| dev_warn(hsotg->dev, "%s: Invalid parameter g_tx_fifo_size[%d]=%d\n", |
| __func__, fifo, |
| hsotg->params.g_tx_fifo_size[fifo]); |
| hsotg->params.g_tx_fifo_size[fifo] = dptxfszn; |
| } |
| } |
| } |
| |
| #define CHECK_RANGE(_param, _min, _max, _def) do { \ |
| if ((int)(hsotg->params._param) < (_min) || \ |
| (hsotg->params._param) > (_max)) { \ |
| dev_warn(hsotg->dev, "%s: Invalid parameter %s=%d\n", \ |
| __func__, #_param, hsotg->params._param); \ |
| hsotg->params._param = (_def); \ |
| } \ |
| } while (0) |
| |
| #define CHECK_BOOL(_param, _check) do { \ |
| if (hsotg->params._param && !(_check)) { \ |
| dev_warn(hsotg->dev, "%s: Invalid parameter %s=%d\n", \ |
| __func__, #_param, hsotg->params._param); \ |
| hsotg->params._param = false; \ |
| } \ |
| } while (0) |
| |
| static void dwc2_check_params(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_hw_params *hw = &hsotg->hw_params; |
| struct dwc2_core_params *p = &hsotg->params; |
| bool dma_capable = !(hw->arch == GHWCFG2_SLAVE_ONLY_ARCH); |
| |
| dwc2_check_param_otg_cap(hsotg); |
| dwc2_check_param_phy_type(hsotg); |
| dwc2_check_param_speed(hsotg); |
| dwc2_check_param_phy_utmi_width(hsotg); |
| dwc2_check_param_power_down(hsotg); |
| CHECK_BOOL(enable_dynamic_fifo, hw->enable_dynamic_fifo); |
| CHECK_BOOL(en_multiple_tx_fifo, hw->en_multiple_tx_fifo); |
| CHECK_BOOL(i2c_enable, hw->i2c_enable); |
| CHECK_BOOL(ipg_isoc_en, hw->ipg_isoc_en); |
| CHECK_BOOL(acg_enable, hw->acg_enable); |
| CHECK_BOOL(reload_ctl, (hsotg->hw_params.snpsid > DWC2_CORE_REV_2_92a)); |
| CHECK_BOOL(lpm, (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_80a)); |
| CHECK_BOOL(lpm, hw->lpm_mode); |
| CHECK_BOOL(lpm_clock_gating, hsotg->params.lpm); |
| CHECK_BOOL(besl, hsotg->params.lpm); |
| CHECK_BOOL(besl, (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)); |
| CHECK_BOOL(hird_threshold_en, hsotg->params.lpm); |
| CHECK_RANGE(hird_threshold, 0, hsotg->params.besl ? 12 : 7, 0); |
| CHECK_BOOL(service_interval, hw->service_interval_mode); |
| CHECK_RANGE(max_packet_count, |
| 15, hw->max_packet_count, |
| hw->max_packet_count); |
| CHECK_RANGE(max_transfer_size, |
| 2047, hw->max_transfer_size, |
| hw->max_transfer_size); |
| |
| if ((hsotg->dr_mode == USB_DR_MODE_HOST) || |
| (hsotg->dr_mode == USB_DR_MODE_OTG)) { |
| CHECK_BOOL(host_dma, dma_capable); |
| CHECK_BOOL(dma_desc_enable, p->host_dma); |
| CHECK_BOOL(dma_desc_fs_enable, p->dma_desc_enable); |
| CHECK_BOOL(host_ls_low_power_phy_clk, |
| p->phy_type == DWC2_PHY_TYPE_PARAM_FS); |
| CHECK_RANGE(host_channels, |
| 1, hw->host_channels, |
| hw->host_channels); |
| CHECK_RANGE(host_rx_fifo_size, |
| 16, hw->rx_fifo_size, |
| hw->rx_fifo_size); |
| CHECK_RANGE(host_nperio_tx_fifo_size, |
| 16, hw->host_nperio_tx_fifo_size, |
| hw->host_nperio_tx_fifo_size); |
| CHECK_RANGE(host_perio_tx_fifo_size, |
| 16, hw->host_perio_tx_fifo_size, |
| hw->host_perio_tx_fifo_size); |
| } |
| |
| if ((hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) || |
| (hsotg->dr_mode == USB_DR_MODE_OTG)) { |
| CHECK_BOOL(g_dma, dma_capable); |
| CHECK_BOOL(g_dma_desc, (p->g_dma && hw->dma_desc_enable)); |
| CHECK_RANGE(g_rx_fifo_size, |
| 16, hw->rx_fifo_size, |
| hw->rx_fifo_size); |
| CHECK_RANGE(g_np_tx_fifo_size, |
| 16, hw->dev_nperio_tx_fifo_size, |
| hw->dev_nperio_tx_fifo_size); |
| dwc2_check_param_tx_fifo_sizes(hsotg); |
| } |
| } |
| |
| /* |
| * Gets host hardware parameters. Forces host mode if not currently in |
| * host mode. Should be called immediately after a core soft reset in |
| * order to get the reset values. |
| */ |
| static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_hw_params *hw = &hsotg->hw_params; |
| u32 gnptxfsiz; |
| u32 hptxfsiz; |
| |
| if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) |
| return; |
| |
| dwc2_force_mode(hsotg, true); |
| |
| gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ); |
| hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ); |
| |
| hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >> |
| FIFOSIZE_DEPTH_SHIFT; |
| hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >> |
| FIFOSIZE_DEPTH_SHIFT; |
| } |
| |
| /* |
| * Gets device hardware parameters. Forces device mode if not |
| * currently in device mode. Should be called immediately after a core |
| * soft reset in order to get the reset values. |
| */ |
| static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_hw_params *hw = &hsotg->hw_params; |
| u32 gnptxfsiz; |
| int fifo, fifo_count; |
| |
| if (hsotg->dr_mode == USB_DR_MODE_HOST) |
| return; |
| |
| dwc2_force_mode(hsotg, false); |
| |
| gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ); |
| |
| fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); |
| |
| for (fifo = 1; fifo <= fifo_count; fifo++) { |
| hw->g_tx_fifo_size[fifo] = |
| (dwc2_readl(hsotg, DPTXFSIZN(fifo)) & |
| FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT; |
| } |
| |
| hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >> |
| FIFOSIZE_DEPTH_SHIFT; |
| } |
| |
| /** |
| * dwc2_get_hwparams() - During device initialization, read various hardware |
| * configuration registers and interpret the contents. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| * |
| */ |
| int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_hw_params *hw = &hsotg->hw_params; |
| unsigned int width; |
| u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4; |
| u32 grxfsiz; |
| |
| hwcfg1 = dwc2_readl(hsotg, GHWCFG1); |
| hwcfg2 = dwc2_readl(hsotg, GHWCFG2); |
| hwcfg3 = dwc2_readl(hsotg, GHWCFG3); |
| hwcfg4 = dwc2_readl(hsotg, GHWCFG4); |
| grxfsiz = dwc2_readl(hsotg, GRXFSIZ); |
| |
| /* hwcfg1 */ |
| hw->dev_ep_dirs = hwcfg1; |
| |
| /* hwcfg2 */ |
| hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >> |
| GHWCFG2_OP_MODE_SHIFT; |
| hw->arch = (hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) >> |
| GHWCFG2_ARCHITECTURE_SHIFT; |
| hw->enable_dynamic_fifo = !!(hwcfg2 & GHWCFG2_DYNAMIC_FIFO); |
| hw->host_channels = 1 + ((hwcfg2 & GHWCFG2_NUM_HOST_CHAN_MASK) >> |
| GHWCFG2_NUM_HOST_CHAN_SHIFT); |
| hw->hs_phy_type = (hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK) >> |
| GHWCFG2_HS_PHY_TYPE_SHIFT; |
| hw->fs_phy_type = (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) >> |
| GHWCFG2_FS_PHY_TYPE_SHIFT; |
| hw->num_dev_ep = (hwcfg2 & GHWCFG2_NUM_DEV_EP_MASK) >> |
| GHWCFG2_NUM_DEV_EP_SHIFT; |
| hw->nperio_tx_q_depth = |
| (hwcfg2 & GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK) >> |
| GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT << 1; |
| hw->host_perio_tx_q_depth = |
| (hwcfg2 & GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK) >> |
| GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT << 1; |
| hw->dev_token_q_depth = |
| (hwcfg2 & GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK) >> |
| GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT; |
| |
| /* hwcfg3 */ |
| width = (hwcfg3 & GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK) >> |
| GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT; |
| hw->max_transfer_size = (1 << (width + 11)) - 1; |
| width = (hwcfg3 & GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK) >> |
| GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT; |
| hw->max_packet_count = (1 << (width + 4)) - 1; |
| hw->i2c_enable = !!(hwcfg3 & GHWCFG3_I2C); |
| hw->total_fifo_size = (hwcfg3 & GHWCFG3_DFIFO_DEPTH_MASK) >> |
| GHWCFG3_DFIFO_DEPTH_SHIFT; |
| hw->lpm_mode = !!(hwcfg3 & GHWCFG3_OTG_LPM_EN); |
| |
| /* hwcfg4 */ |
| hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN); |
| hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >> |
| GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT; |
| hw->num_dev_in_eps = (hwcfg4 & GHWCFG4_NUM_IN_EPS_MASK) >> |
| GHWCFG4_NUM_IN_EPS_SHIFT; |
| hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA); |
| hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ); |
| hw->hibernation = !!(hwcfg4 & GHWCFG4_HIBER); |
| hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >> |
| GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT; |
| hw->acg_enable = !!(hwcfg4 & GHWCFG4_ACG_SUPPORTED); |
| hw->ipg_isoc_en = !!(hwcfg4 & GHWCFG4_IPG_ISOC_SUPPORTED); |
| hw->service_interval_mode = !!(hwcfg4 & |
| GHWCFG4_SERVICE_INTERVAL_SUPPORTED); |
| |
| /* fifo sizes */ |
| hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >> |
| GRXFSIZ_DEPTH_SHIFT; |
| /* |
| * Host specific hardware parameters. Reading these parameters |
| * requires the controller to be in host mode. The mode will |
| * be forced, if necessary, to read these values. |
| */ |
| dwc2_get_host_hwparams(hsotg); |
| dwc2_get_dev_hwparams(hsotg); |
| |
| return 0; |
| } |
| |
| typedef void (*set_params_cb)(struct dwc2_hsotg *data); |
| |
| int dwc2_init_params(struct dwc2_hsotg *hsotg) |
| { |
| const struct of_device_id *match; |
| set_params_cb set_params; |
| |
| dwc2_set_default_params(hsotg); |
| dwc2_get_device_properties(hsotg); |
| |
| match = of_match_device(dwc2_of_match_table, hsotg->dev); |
| if (match && match->data) { |
| set_params = match->data; |
| set_params(hsotg); |
| } else { |
| const struct acpi_device_id *amatch; |
| |
| amatch = acpi_match_device(dwc2_acpi_match, hsotg->dev); |
| if (amatch && amatch->driver_data) { |
| set_params = (set_params_cb)amatch->driver_data; |
| set_params(hsotg); |
| } |
| } |
| |
| dwc2_check_params(hsotg); |
| |
| return 0; |
| } |