| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) |
| */ |
| |
| #ifndef _ASM_ARC_ATOMIC_H |
| #define _ASM_ARC_ATOMIC_H |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <linux/types.h> |
| #include <linux/compiler.h> |
| #include <asm/cmpxchg.h> |
| #include <asm/barrier.h> |
| #include <asm/smp.h> |
| |
| #define ATOMIC_INIT(i) { (i) } |
| |
| #ifndef CONFIG_ARC_PLAT_EZNPS |
| |
| #define atomic_read(v) READ_ONCE((v)->counter) |
| |
| #ifdef CONFIG_ARC_HAS_LLSC |
| |
| #define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i)) |
| |
| #define ATOMIC_OP(op, c_op, asm_op) \ |
| static inline void atomic_##op(int i, atomic_t *v) \ |
| { \ |
| unsigned int val; \ |
| \ |
| __asm__ __volatile__( \ |
| "1: llock %[val], [%[ctr]] \n" \ |
| " " #asm_op " %[val], %[val], %[i] \n" \ |
| " scond %[val], [%[ctr]] \n" \ |
| " bnz 1b \n" \ |
| : [val] "=&r" (val) /* Early clobber to prevent reg reuse */ \ |
| : [ctr] "r" (&v->counter), /* Not "m": llock only supports reg direct addr mode */ \ |
| [i] "ir" (i) \ |
| : "cc"); \ |
| } \ |
| |
| #define ATOMIC_OP_RETURN(op, c_op, asm_op) \ |
| static inline int atomic_##op##_return(int i, atomic_t *v) \ |
| { \ |
| unsigned int val; \ |
| \ |
| /* \ |
| * Explicit full memory barrier needed before/after as \ |
| * LLOCK/SCOND thmeselves don't provide any such semantics \ |
| */ \ |
| smp_mb(); \ |
| \ |
| __asm__ __volatile__( \ |
| "1: llock %[val], [%[ctr]] \n" \ |
| " " #asm_op " %[val], %[val], %[i] \n" \ |
| " scond %[val], [%[ctr]] \n" \ |
| " bnz 1b \n" \ |
| : [val] "=&r" (val) \ |
| : [ctr] "r" (&v->counter), \ |
| [i] "ir" (i) \ |
| : "cc"); \ |
| \ |
| smp_mb(); \ |
| \ |
| return val; \ |
| } |
| |
| #define ATOMIC_FETCH_OP(op, c_op, asm_op) \ |
| static inline int atomic_fetch_##op(int i, atomic_t *v) \ |
| { \ |
| unsigned int val, orig; \ |
| \ |
| /* \ |
| * Explicit full memory barrier needed before/after as \ |
| * LLOCK/SCOND thmeselves don't provide any such semantics \ |
| */ \ |
| smp_mb(); \ |
| \ |
| __asm__ __volatile__( \ |
| "1: llock %[orig], [%[ctr]] \n" \ |
| " " #asm_op " %[val], %[orig], %[i] \n" \ |
| " scond %[val], [%[ctr]] \n" \ |
| " bnz 1b \n" \ |
| : [val] "=&r" (val), \ |
| [orig] "=&r" (orig) \ |
| : [ctr] "r" (&v->counter), \ |
| [i] "ir" (i) \ |
| : "cc"); \ |
| \ |
| smp_mb(); \ |
| \ |
| return orig; \ |
| } |
| |
| #else /* !CONFIG_ARC_HAS_LLSC */ |
| |
| #ifndef CONFIG_SMP |
| |
| /* violating atomic_xxx API locking protocol in UP for optimization sake */ |
| #define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i)) |
| |
| #else |
| |
| static inline void atomic_set(atomic_t *v, int i) |
| { |
| /* |
| * Independent of hardware support, all of the atomic_xxx() APIs need |
| * to follow the same locking rules to make sure that a "hardware" |
| * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn |
| * sequence |
| * |
| * Thus atomic_set() despite being 1 insn (and seemingly atomic) |
| * requires the locking. |
| */ |
| unsigned long flags; |
| |
| atomic_ops_lock(flags); |
| WRITE_ONCE(v->counter, i); |
| atomic_ops_unlock(flags); |
| } |
| |
| #define atomic_set_release(v, i) atomic_set((v), (i)) |
| |
| #endif |
| |
| /* |
| * Non hardware assisted Atomic-R-M-W |
| * Locking would change to irq-disabling only (UP) and spinlocks (SMP) |
| */ |
| |
| #define ATOMIC_OP(op, c_op, asm_op) \ |
| static inline void atomic_##op(int i, atomic_t *v) \ |
| { \ |
| unsigned long flags; \ |
| \ |
| atomic_ops_lock(flags); \ |
| v->counter c_op i; \ |
| atomic_ops_unlock(flags); \ |
| } |
| |
| #define ATOMIC_OP_RETURN(op, c_op, asm_op) \ |
| static inline int atomic_##op##_return(int i, atomic_t *v) \ |
| { \ |
| unsigned long flags; \ |
| unsigned long temp; \ |
| \ |
| /* \ |
| * spin lock/unlock provides the needed smp_mb() before/after \ |
| */ \ |
| atomic_ops_lock(flags); \ |
| temp = v->counter; \ |
| temp c_op i; \ |
| v->counter = temp; \ |
| atomic_ops_unlock(flags); \ |
| \ |
| return temp; \ |
| } |
| |
| #define ATOMIC_FETCH_OP(op, c_op, asm_op) \ |
| static inline int atomic_fetch_##op(int i, atomic_t *v) \ |
| { \ |
| unsigned long flags; \ |
| unsigned long orig; \ |
| \ |
| /* \ |
| * spin lock/unlock provides the needed smp_mb() before/after \ |
| */ \ |
| atomic_ops_lock(flags); \ |
| orig = v->counter; \ |
| v->counter c_op i; \ |
| atomic_ops_unlock(flags); \ |
| \ |
| return orig; \ |
| } |
| |
| #endif /* !CONFIG_ARC_HAS_LLSC */ |
| |
| #define ATOMIC_OPS(op, c_op, asm_op) \ |
| ATOMIC_OP(op, c_op, asm_op) \ |
| ATOMIC_OP_RETURN(op, c_op, asm_op) \ |
| ATOMIC_FETCH_OP(op, c_op, asm_op) |
| |
| ATOMIC_OPS(add, +=, add) |
| ATOMIC_OPS(sub, -=, sub) |
| |
| #define atomic_andnot atomic_andnot |
| #define atomic_fetch_andnot atomic_fetch_andnot |
| |
| #undef ATOMIC_OPS |
| #define ATOMIC_OPS(op, c_op, asm_op) \ |
| ATOMIC_OP(op, c_op, asm_op) \ |
| ATOMIC_FETCH_OP(op, c_op, asm_op) |
| |
| ATOMIC_OPS(and, &=, and) |
| ATOMIC_OPS(andnot, &= ~, bic) |
| ATOMIC_OPS(or, |=, or) |
| ATOMIC_OPS(xor, ^=, xor) |
| |
| #else /* CONFIG_ARC_PLAT_EZNPS */ |
| |
| static inline int atomic_read(const atomic_t *v) |
| { |
| int temp; |
| |
| __asm__ __volatile__( |
| " ld.di %0, [%1]" |
| : "=r"(temp) |
| : "r"(&v->counter) |
| : "memory"); |
| return temp; |
| } |
| |
| static inline void atomic_set(atomic_t *v, int i) |
| { |
| __asm__ __volatile__( |
| " st.di %0,[%1]" |
| : |
| : "r"(i), "r"(&v->counter) |
| : "memory"); |
| } |
| |
| #define ATOMIC_OP(op, c_op, asm_op) \ |
| static inline void atomic_##op(int i, atomic_t *v) \ |
| { \ |
| __asm__ __volatile__( \ |
| " mov r2, %0\n" \ |
| " mov r3, %1\n" \ |
| " .word %2\n" \ |
| : \ |
| : "r"(i), "r"(&v->counter), "i"(asm_op) \ |
| : "r2", "r3", "memory"); \ |
| } \ |
| |
| #define ATOMIC_OP_RETURN(op, c_op, asm_op) \ |
| static inline int atomic_##op##_return(int i, atomic_t *v) \ |
| { \ |
| unsigned int temp = i; \ |
| \ |
| /* Explicit full memory barrier needed before/after */ \ |
| smp_mb(); \ |
| \ |
| __asm__ __volatile__( \ |
| " mov r2, %0\n" \ |
| " mov r3, %1\n" \ |
| " .word %2\n" \ |
| " mov %0, r2" \ |
| : "+r"(temp) \ |
| : "r"(&v->counter), "i"(asm_op) \ |
| : "r2", "r3", "memory"); \ |
| \ |
| smp_mb(); \ |
| \ |
| temp c_op i; \ |
| \ |
| return temp; \ |
| } |
| |
| #define ATOMIC_FETCH_OP(op, c_op, asm_op) \ |
| static inline int atomic_fetch_##op(int i, atomic_t *v) \ |
| { \ |
| unsigned int temp = i; \ |
| \ |
| /* Explicit full memory barrier needed before/after */ \ |
| smp_mb(); \ |
| \ |
| __asm__ __volatile__( \ |
| " mov r2, %0\n" \ |
| " mov r3, %1\n" \ |
| " .word %2\n" \ |
| " mov %0, r2" \ |
| : "+r"(temp) \ |
| : "r"(&v->counter), "i"(asm_op) \ |
| : "r2", "r3", "memory"); \ |
| \ |
| smp_mb(); \ |
| \ |
| return temp; \ |
| } |
| |
| #define ATOMIC_OPS(op, c_op, asm_op) \ |
| ATOMIC_OP(op, c_op, asm_op) \ |
| ATOMIC_OP_RETURN(op, c_op, asm_op) \ |
| ATOMIC_FETCH_OP(op, c_op, asm_op) |
| |
| ATOMIC_OPS(add, +=, CTOP_INST_AADD_DI_R2_R2_R3) |
| #define atomic_sub(i, v) atomic_add(-(i), (v)) |
| #define atomic_sub_return(i, v) atomic_add_return(-(i), (v)) |
| #define atomic_fetch_sub(i, v) atomic_fetch_add(-(i), (v)) |
| |
| #undef ATOMIC_OPS |
| #define ATOMIC_OPS(op, c_op, asm_op) \ |
| ATOMIC_OP(op, c_op, asm_op) \ |
| ATOMIC_FETCH_OP(op, c_op, asm_op) |
| |
| ATOMIC_OPS(and, &=, CTOP_INST_AAND_DI_R2_R2_R3) |
| ATOMIC_OPS(or, |=, CTOP_INST_AOR_DI_R2_R2_R3) |
| ATOMIC_OPS(xor, ^=, CTOP_INST_AXOR_DI_R2_R2_R3) |
| |
| #endif /* CONFIG_ARC_PLAT_EZNPS */ |
| |
| #undef ATOMIC_OPS |
| #undef ATOMIC_FETCH_OP |
| #undef ATOMIC_OP_RETURN |
| #undef ATOMIC_OP |
| |
| #ifdef CONFIG_GENERIC_ATOMIC64 |
| |
| #include <asm-generic/atomic64.h> |
| |
| #else /* Kconfig ensures this is only enabled with needed h/w assist */ |
| |
| /* |
| * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD) |
| * - The address HAS to be 64-bit aligned |
| * - There are 2 semantics involved here: |
| * = exclusive implies no interim update between load/store to same addr |
| * = both words are observed/updated together: this is guaranteed even |
| * for regular 64-bit load (LDD) / store (STD). Thus atomic64_set() |
| * is NOT required to use LLOCKD+SCONDD, STD suffices |
| */ |
| |
| typedef struct { |
| s64 __aligned(8) counter; |
| } atomic64_t; |
| |
| #define ATOMIC64_INIT(a) { (a) } |
| |
| static inline s64 atomic64_read(const atomic64_t *v) |
| { |
| s64 val; |
| |
| __asm__ __volatile__( |
| " ldd %0, [%1] \n" |
| : "=r"(val) |
| : "r"(&v->counter)); |
| |
| return val; |
| } |
| |
| static inline void atomic64_set(atomic64_t *v, s64 a) |
| { |
| /* |
| * This could have been a simple assignment in "C" but would need |
| * explicit volatile. Otherwise gcc optimizers could elide the store |
| * which borked atomic64 self-test |
| * In the inline asm version, memory clobber needed for exact same |
| * reason, to tell gcc about the store. |
| * |
| * This however is not needed for sibling atomic64_add() etc since both |
| * load/store are explicitly done in inline asm. As long as API is used |
| * for each access, gcc has no way to optimize away any load/store |
| */ |
| __asm__ __volatile__( |
| " std %0, [%1] \n" |
| : |
| : "r"(a), "r"(&v->counter) |
| : "memory"); |
| } |
| |
| #define ATOMIC64_OP(op, op1, op2) \ |
| static inline void atomic64_##op(s64 a, atomic64_t *v) \ |
| { \ |
| s64 val; \ |
| \ |
| __asm__ __volatile__( \ |
| "1: \n" \ |
| " llockd %0, [%1] \n" \ |
| " " #op1 " %L0, %L0, %L2 \n" \ |
| " " #op2 " %H0, %H0, %H2 \n" \ |
| " scondd %0, [%1] \n" \ |
| " bnz 1b \n" \ |
| : "=&r"(val) \ |
| : "r"(&v->counter), "ir"(a) \ |
| : "cc"); \ |
| } \ |
| |
| #define ATOMIC64_OP_RETURN(op, op1, op2) \ |
| static inline s64 atomic64_##op##_return(s64 a, atomic64_t *v) \ |
| { \ |
| s64 val; \ |
| \ |
| smp_mb(); \ |
| \ |
| __asm__ __volatile__( \ |
| "1: \n" \ |
| " llockd %0, [%1] \n" \ |
| " " #op1 " %L0, %L0, %L2 \n" \ |
| " " #op2 " %H0, %H0, %H2 \n" \ |
| " scondd %0, [%1] \n" \ |
| " bnz 1b \n" \ |
| : [val] "=&r"(val) \ |
| : "r"(&v->counter), "ir"(a) \ |
| : "cc"); /* memory clobber comes from smp_mb() */ \ |
| \ |
| smp_mb(); \ |
| \ |
| return val; \ |
| } |
| |
| #define ATOMIC64_FETCH_OP(op, op1, op2) \ |
| static inline s64 atomic64_fetch_##op(s64 a, atomic64_t *v) \ |
| { \ |
| s64 val, orig; \ |
| \ |
| smp_mb(); \ |
| \ |
| __asm__ __volatile__( \ |
| "1: \n" \ |
| " llockd %0, [%2] \n" \ |
| " " #op1 " %L1, %L0, %L3 \n" \ |
| " " #op2 " %H1, %H0, %H3 \n" \ |
| " scondd %1, [%2] \n" \ |
| " bnz 1b \n" \ |
| : "=&r"(orig), "=&r"(val) \ |
| : "r"(&v->counter), "ir"(a) \ |
| : "cc"); /* memory clobber comes from smp_mb() */ \ |
| \ |
| smp_mb(); \ |
| \ |
| return orig; \ |
| } |
| |
| #define ATOMIC64_OPS(op, op1, op2) \ |
| ATOMIC64_OP(op, op1, op2) \ |
| ATOMIC64_OP_RETURN(op, op1, op2) \ |
| ATOMIC64_FETCH_OP(op, op1, op2) |
| |
| #define atomic64_andnot atomic64_andnot |
| #define atomic64_fetch_andnot atomic64_fetch_andnot |
| |
| ATOMIC64_OPS(add, add.f, adc) |
| ATOMIC64_OPS(sub, sub.f, sbc) |
| ATOMIC64_OPS(and, and, and) |
| ATOMIC64_OPS(andnot, bic, bic) |
| ATOMIC64_OPS(or, or, or) |
| ATOMIC64_OPS(xor, xor, xor) |
| |
| #undef ATOMIC64_OPS |
| #undef ATOMIC64_FETCH_OP |
| #undef ATOMIC64_OP_RETURN |
| #undef ATOMIC64_OP |
| |
| static inline s64 |
| atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new) |
| { |
| s64 prev; |
| |
| smp_mb(); |
| |
| __asm__ __volatile__( |
| "1: llockd %0, [%1] \n" |
| " brne %L0, %L2, 2f \n" |
| " brne %H0, %H2, 2f \n" |
| " scondd %3, [%1] \n" |
| " bnz 1b \n" |
| "2: \n" |
| : "=&r"(prev) |
| : "r"(ptr), "ir"(expected), "r"(new) |
| : "cc"); /* memory clobber comes from smp_mb() */ |
| |
| smp_mb(); |
| |
| return prev; |
| } |
| |
| static inline s64 atomic64_xchg(atomic64_t *ptr, s64 new) |
| { |
| s64 prev; |
| |
| smp_mb(); |
| |
| __asm__ __volatile__( |
| "1: llockd %0, [%1] \n" |
| " scondd %2, [%1] \n" |
| " bnz 1b \n" |
| "2: \n" |
| : "=&r"(prev) |
| : "r"(ptr), "r"(new) |
| : "cc"); /* memory clobber comes from smp_mb() */ |
| |
| smp_mb(); |
| |
| return prev; |
| } |
| |
| /** |
| * atomic64_dec_if_positive - decrement by 1 if old value positive |
| * @v: pointer of type atomic64_t |
| * |
| * The function returns the old value of *v minus 1, even if |
| * the atomic variable, v, was not decremented. |
| */ |
| |
| static inline s64 atomic64_dec_if_positive(atomic64_t *v) |
| { |
| s64 val; |
| |
| smp_mb(); |
| |
| __asm__ __volatile__( |
| "1: llockd %0, [%1] \n" |
| " sub.f %L0, %L0, 1 # w0 - 1, set C on borrow\n" |
| " sub.c %H0, %H0, 1 # if C set, w1 - 1\n" |
| " brlt %H0, 0, 2f \n" |
| " scondd %0, [%1] \n" |
| " bnz 1b \n" |
| "2: \n" |
| : "=&r"(val) |
| : "r"(&v->counter) |
| : "cc"); /* memory clobber comes from smp_mb() */ |
| |
| smp_mb(); |
| |
| return val; |
| } |
| #define atomic64_dec_if_positive atomic64_dec_if_positive |
| |
| /** |
| * atomic64_fetch_add_unless - add unless the number is a given value |
| * @v: pointer of type atomic64_t |
| * @a: the amount to add to v... |
| * @u: ...unless v is equal to u. |
| * |
| * Atomically adds @a to @v, if it was not @u. |
| * Returns the old value of @v |
| */ |
| static inline s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u) |
| { |
| s64 old, temp; |
| |
| smp_mb(); |
| |
| __asm__ __volatile__( |
| "1: llockd %0, [%2] \n" |
| " brne %L0, %L4, 2f # continue to add since v != u \n" |
| " breq.d %H0, %H4, 3f # return since v == u \n" |
| "2: \n" |
| " add.f %L1, %L0, %L3 \n" |
| " adc %H1, %H0, %H3 \n" |
| " scondd %1, [%2] \n" |
| " bnz 1b \n" |
| "3: \n" |
| : "=&r"(old), "=&r" (temp) |
| : "r"(&v->counter), "r"(a), "r"(u) |
| : "cc"); /* memory clobber comes from smp_mb() */ |
| |
| smp_mb(); |
| |
| return old; |
| } |
| #define atomic64_fetch_add_unless atomic64_fetch_add_unless |
| |
| #endif /* !CONFIG_GENERIC_ATOMIC64 */ |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| #endif |