Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: NVIDIA Tegra DisplayPort AUX Interface

maintainers:
  - Thierry Reding <thierry.reding@gmail.com>
  - Jon Hunter <jonathanh@nvidia.com>

description: |
  The Tegra Display Port Auxiliary (DPAUX) pad controller manages two
  pins which can be assigned to either the DPAUX channel or to an I2C
  controller.

  When configured for DisplayPort AUX operation, the DPAUX controller
  can also be used to communicate with a DisplayPort device using the
  AUX channel.

properties:
  $nodename:
    pattern: "^dpaux@[0-9a-f]+$"

  compatible:
    oneOf:
      - enum:
          - nvidia,tegra124-dpaux
          - nvidia,tegra210-dpaux
          - nvidia,tegra186-dpaux
          - nvidia,tegra194-dpaux

      - items:
          - const: nvidia,tegra132-dpaux
          - const: nvidia,tegra124-dpaux

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: clock input for the DPAUX hardware
      - description: reference clock

  clock-names:
    items:
      - const: dpaux
      - const: parent

  resets:
    items:
      - description: module reset

  reset-names:
    items:
      - const: dpaux

  power-domains:
    maxItems: 1

  i2c-bus:
    description: Subnode where I2C slave devices are listed. This
      subnode must be always present. If there are no I2C slave
      devices, an empty node should be added. See ../../i2c/i2c.yaml
      for more information.
    type: object

  aux-bus:
    $ref: /schemas/display/dp-aux-bus.yaml#

  vdd-supply:
    description: phandle of a supply that powers the DisplayPort
      link

patternProperties:
  "^pinmux-[a-z0-9]+$":
    description:
      Since only three configurations are possible, only three child
      nodes are needed to describe the pin mux'ing options for the
      DPAUX pads. Furthermore, given that the pad functions are only
      applicable to a single set of pads, the child nodes only need
      to describe the pad group the functions are being applied to
      rather than the individual pads.
    type: object
    properties:
      groups:
        const: dpaux-io

      function:
        enum:
          - aux
          - i2c
          - off

    additionalProperties: false

    required:
      - groups
      - function

additionalProperties: false

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names
  - resets
  - reset-names

examples:
  - |
    #include <dt-bindings/clock/tegra210-car.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    dpaux: dpaux@545c0000 {
        compatible = "nvidia,tegra210-dpaux";
        reg = <0x545c0000 0x00040000>;
        interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
                 <&tegra_car TEGRA210_CLK_PLL_DP>;
        clock-names = "dpaux", "parent";
        resets = <&tegra_car 181>;
        reset-names = "dpaux";
        power-domains = <&pd_sor>;

        state_dpaux_aux: pinmux-aux {
            groups = "dpaux-io";
            function = "aux";
        };

        state_dpaux_i2c: pinmux-i2c {
            groups = "dpaux-io";
            function = "i2c";
        };

        state_dpaux_off: pinmux-off {
            groups = "dpaux-io";
            function = "off";
        };

        i2c-bus {
            #address-cells = <1>;
            #size-cells = <0>;
        };
    };