| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/iio/proximity/semtech,sx9500.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Semtech's SX9500 capacitive proximity button device |
| |
| maintainers: |
| - Jonathan Cameron <jic23@kernel.org> |
| |
| properties: |
| compatible: |
| const: semtech,sx9500 |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| reset-gpios: |
| description: |
| GPIO connected to the active low reset pin. |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/gpio/gpio.h> |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| proximity@28 { |
| compatible = "semtech,sx9500"; |
| reg = <0x28>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <16 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| ... |
