| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: ARM Generic Interrupt Controller, version 3 |
| |
| maintainers: |
| - Marc Zyngier <maz@kernel.org> |
| |
| description: | |
| AArch64 SMP cores are often associated with a GICv3, providing Private |
| Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), |
| Software Generated Interrupts (SGI), and Locality-specific Peripheral |
| Interrupts (LPI). |
| |
| allOf: |
| - $ref: /schemas/interrupt-controller.yaml# |
| |
| properties: |
| compatible: |
| oneOf: |
| - items: |
| - enum: |
| - qcom,msm8996-gic-v3 |
| - const: arm,gic-v3 |
| - const: arm,gic-v3 |
| |
| interrupt-controller: true |
| |
| "#address-cells": |
| enum: [ 0, 1, 2 ] |
| "#size-cells": |
| enum: [ 1, 2 ] |
| |
| ranges: true |
| |
| "#interrupt-cells": |
| description: | |
| Specifies the number of cells needed to encode an interrupt source. |
| Must be a single cell with a value of at least 3. |
| If the system requires describing PPI affinity, then the value must |
| be at least 4. |
| |
| The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI |
| interrupts, 2 for interrupts in the Extended SPI range, 3 for the |
| Extended PPI range. Other values are reserved for future use. |
| |
| The 2nd cell contains the interrupt number for the interrupt type. |
| SPI interrupts are in the range [0-987]. PPI interrupts are in the |
| range [0-15]. Extented SPI interrupts are in the range [0-1023]. |
| Extended PPI interrupts are in the range [0-127]. |
| |
| The 3rd cell is the flags, encoded as follows: |
| bits[3:0] trigger type and level flags. |
| 1 = edge triggered |
| 4 = level triggered |
| |
| The 4th cell is a phandle to a node describing a set of CPUs this |
| interrupt is affine to. The interrupt must be a PPI, and the node |
| pointed must be a subnode of the "ppi-partitions" subnode. For |
| interrupt types other than PPI or PPIs that are not partitionned, |
| this cell must be zero. See the "ppi-partitions" node description |
| below. |
| |
| Cells 5 and beyond are reserved for future use and must have a value |
| of 0 if present. |
| enum: [ 3, 4 ] |
| |
| reg: |
| description: | |
| Specifies base physical address(s) and size of the GIC |
| registers, in the following order: |
| - GIC Distributor interface (GICD) |
| - GIC Redistributors (GICR), one range per redistributor region |
| - GIC CPU interface (GICC) |
| - GIC Hypervisor interface (GICH) |
| - GIC Virtual CPU interface (GICV) |
| |
| GICC, GICH and GICV are optional, but must be described if the CPUs |
| support them. Examples of such CPUs are ARM's implementations of the |
| ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and |
| A73 (this list is not exhaustive). |
| |
| minItems: 2 |
| maxItems: 4096 # Should be enough? |
| |
| interrupts: |
| description: |
| Interrupt source of the VGIC maintenance interrupt. |
| maxItems: 1 |
| |
| redistributor-stride: |
| description: |
| If using padding pages, specifies the stride of consecutive |
| redistributors. Must be a multiple of 64kB. |
| $ref: /schemas/types.yaml#/definitions/uint64 |
| multipleOf: 0x10000 |
| exclusiveMinimum: 0 |
| |
| "#redistributor-regions": |
| description: |
| The number of independent contiguous regions occupied by the |
| redistributors. Required if more than one such region is present. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| maximum: 4096 |
| |
| msi-controller: |
| description: |
| Only present if the Message Based Interrupt functionality is |
| being exposed by the HW, and the mbi-ranges property present. |
| |
| mbi-ranges: |
| description: |
| A list of pairs <intid span>, where "intid" is the first SPI of a range |
| that can be used an MBI, and "span" the size of that range. Multiple |
| ranges can be provided. |
| $ref: /schemas/types.yaml#/definitions/uint32-matrix |
| items: |
| minItems: 2 |
| maxItems: 2 |
| |
| mbi-alias: |
| description: |
| Address property. Base address of an alias of the GICD region containing |
| only the {SET,CLR}SPI registers to be used if isolation is required, |
| and if supported by the HW. |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| items: |
| minItems: 1 |
| maxItems: 2 |
| |
| ppi-partitions: |
| type: object |
| description: |
| PPI affinity can be expressed as a single "ppi-partitions" node, |
| containing a set of sub-nodes. |
| patternProperties: |
| "^interrupt-partition-[0-9]+$": |
| type: object |
| properties: |
| affinity: |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| items: |
| maxItems: 1 |
| description: |
| Should be a list of phandles to CPU nodes (as described in |
| Documentation/devicetree/bindings/arm/cpus.yaml). |
| |
| required: |
| - affinity |
| |
| clocks: |
| maxItems: 1 |
| |
| clock-names: |
| items: |
| - const: aclk |
| |
| power-domains: |
| maxItems: 1 |
| |
| resets: |
| maxItems: 1 |
| |
| dependencies: |
| mbi-ranges: [ msi-controller ] |
| msi-controller: [ mbi-ranges ] |
| |
| required: |
| - compatible |
| - reg |
| |
| patternProperties: |
| "^gic-its@": false |
| "^interrupt-controller@[0-9a-f]+$": false |
| # msi-controller is preferred, but allow other names |
| "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$": |
| type: object |
| description: |
| GICv3 has one or more Interrupt Translation Services (ITS) that are |
| used to route Message Signalled Interrupts (MSI) to the CPUs. |
| properties: |
| compatible: |
| const: arm,gic-v3-its |
| |
| msi-controller: true |
| |
| "#msi-cells": |
| description: |
| The single msi-cell is the DeviceID of the device which will generate |
| the MSI. |
| const: 1 |
| |
| reg: |
| description: |
| Specifies the base physical address and size of the ITS registers. |
| maxItems: 1 |
| |
| socionext,synquacer-pre-its: |
| description: |
| (u32, u32) tuple describing the untranslated |
| address and size of the pre-ITS window. |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| items: |
| minItems: 2 |
| maxItems: 2 |
| |
| required: |
| - compatible |
| - msi-controller |
| - "#msi-cells" |
| - reg |
| |
| additionalProperties: false |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| gic: interrupt-controller@2cf00000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| interrupt-controller; |
| reg = <0x2f000000 0x10000>, // GICD |
| <0x2f100000 0x200000>, // GICR |
| <0x2c000000 0x2000>, // GICC |
| <0x2c010000 0x2000>, // GICH |
| <0x2c020000 0x2000>; // GICV |
| interrupts = <1 9 4>; |
| |
| msi-controller; |
| mbi-ranges = <256 128>; |
| |
| msi-controller@2c200000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| #msi-cells = <1>; |
| reg = <0x2c200000 0x20000>; |
| }; |
| }; |
| |
| - | |
| interrupt-controller@2c010000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| interrupt-controller; |
| redistributor-stride = <0x0 0x40000>; // 256kB stride |
| #redistributor-regions = <2>; |
| reg = <0x2c010000 0x10000>, // GICD |
| <0x2d000000 0x800000>, // GICR 1: CPUs 0-31 |
| <0x2e000000 0x800000>, // GICR 2: CPUs 32-63 |
| <0x2c040000 0x2000>, // GICC |
| <0x2c060000 0x2000>, // GICH |
| <0x2c080000 0x2000>; // GICV |
| interrupts = <1 9 4 0>; |
| |
| msi-controller@2c200000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| #msi-cells = <1>; |
| reg = <0x2c200000 0x20000>; |
| }; |
| |
| msi-controller@2c400000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| #msi-cells = <1>; |
| reg = <0x2c400000 0x20000>; |
| }; |
| |
| ppi-partitions { |
| part0: interrupt-partition-0 { |
| affinity = <&cpu0>, <&cpu2>; |
| }; |
| |
| part1: interrupt-partition-1 { |
| affinity = <&cpu1>, <&cpu3>; |
| }; |
| }; |
| }; |
| |
| |
| device@0 { |
| reg = <0 4>; |
| interrupts = <1 1 4 &part0>; |
| }; |
| |
| ... |
