| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: STMicroelectronics Flexible Memory Controller 2 (FMC2) |
| |
| description: | |
| The FMC2 functional block makes the interface with: synchronous and |
| asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped |
| peripherals) and NAND flash memories. |
| Its main purposes are: |
| - to translate AXI transactions into the appropriate external device |
| protocol |
| - to meet the access time requirements of the external devices |
| All external devices share the addresses, data and control signals with the |
| controller. Each external device is accessed by means of a unique Chip |
| Select. The FMC2 performs only one access at a time to an external device. |
| |
| maintainers: |
| - Christophe Kerello <christophe.kerello@foss.st.com> |
| |
| properties: |
| compatible: |
| const: st,stm32mp1-fmc2-ebi |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| resets: |
| maxItems: 1 |
| |
| "#address-cells": |
| const: 2 |
| |
| "#size-cells": |
| const: 1 |
| |
| ranges: |
| description: | |
| Reflects the memory layout with four integer values per bank. Format: |
| <bank-number> 0 <address of the bank> <size> |
| |
| patternProperties: |
| "^.*@[0-4],[a-f0-9]+$": |
| type: object |
| $ref: mc-peripheral-props.yaml# |
| |
| required: |
| - "#address-cells" |
| - "#size-cells" |
| - compatible |
| - reg |
| - clocks |
| - ranges |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/stm32mp1-clks.h> |
| #include <dt-bindings/reset/stm32mp1-resets.h> |
| memory-controller@58002000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "st,stm32mp1-fmc2-ebi"; |
| reg = <0x58002000 0x1000>; |
| clocks = <&rcc FMC_K>; |
| resets = <&rcc FMC_R>; |
| |
| ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ |
| <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ |
| <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ |
| <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ |
| <4 0 0x80000000 0x10000000>; /* NAND */ |
| |
| psram@0,0 { |
| compatible = "mtd-ram"; |
| reg = <0 0x00000000 0x100000>; |
| bank-width = <2>; |
| |
| st,fmc2-ebi-cs-transaction-type = <1>; |
| st,fmc2-ebi-cs-address-setup-ns = <60>; |
| st,fmc2-ebi-cs-data-setup-ns = <30>; |
| st,fmc2-ebi-cs-bus-turnaround-ns = <5>; |
| }; |
| |
| nand-controller@4,0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32mp1-fmc2-nfc"; |
| reg = <4 0x00000000 0x1000>, |
| <4 0x08010000 0x1000>, |
| <4 0x08020000 0x1000>, |
| <4 0x01000000 0x1000>, |
| <4 0x09010000 0x1000>, |
| <4 0x09020000 0x1000>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>, |
| <&mdma1 20 0x2 0x12000a08 0x0 0x0>, |
| <&mdma1 21 0x2 0x12000a0a 0x0 0x0>; |
| dma-names = "tx", "rx", "ecc"; |
| |
| nand@0 { |
| reg = <0>; |
| nand-on-flash-bbt; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| }; |
| }; |
| |
| ... |
