| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: "http://devicetree.org/schemas/net/rockchip-dwmac.yaml#" |
| $schema: "http://devicetree.org/meta-schemas/core.yaml#" |
| |
| title: Rockchip 10/100/1000 Ethernet driver(GMAC) |
| |
| maintainers: |
| - David Wu <david.wu@rock-chips.com> |
| |
| # We need a select here so we don't match all nodes with 'snps,dwmac' |
| select: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - rockchip,px30-gmac |
| - rockchip,rk3128-gmac |
| - rockchip,rk3228-gmac |
| - rockchip,rk3288-gmac |
| - rockchip,rk3308-gmac |
| - rockchip,rk3328-gmac |
| - rockchip,rk3366-gmac |
| - rockchip,rk3368-gmac |
| - rockchip,rk3399-gmac |
| - rockchip,rk3568-gmac |
| - rockchip,rk3588-gmac |
| - rockchip,rv1108-gmac |
| - rockchip,rv1126-gmac |
| required: |
| - compatible |
| |
| allOf: |
| - $ref: "snps,dwmac.yaml#" |
| |
| properties: |
| compatible: |
| oneOf: |
| - items: |
| - enum: |
| - rockchip,px30-gmac |
| - rockchip,rk3128-gmac |
| - rockchip,rk3228-gmac |
| - rockchip,rk3288-gmac |
| - rockchip,rk3308-gmac |
| - rockchip,rk3328-gmac |
| - rockchip,rk3366-gmac |
| - rockchip,rk3368-gmac |
| - rockchip,rk3399-gmac |
| - rockchip,rv1108-gmac |
| - items: |
| - enum: |
| - rockchip,rk3568-gmac |
| - rockchip,rk3588-gmac |
| - rockchip,rv1126-gmac |
| - const: snps,dwmac-4.20a |
| |
| clocks: |
| minItems: 5 |
| maxItems: 8 |
| |
| clock-names: |
| contains: |
| enum: |
| - stmmaceth |
| - mac_clk_tx |
| - mac_clk_rx |
| - aclk_mac |
| - pclk_mac |
| - clk_mac_ref |
| - clk_mac_refout |
| - clk_mac_speed |
| |
| clock_in_out: |
| description: |
| For RGMII, it must be "input", means main clock(125MHz) |
| is not sourced from SoC's PLL, but input from PHY. |
| For RMII, "input" means PHY provides the reference clock(50MHz), |
| "output" means GMAC provides the reference clock. |
| $ref: /schemas/types.yaml#/definitions/string |
| enum: [input, output] |
| |
| rockchip,grf: |
| description: The phandle of the syscon node for the general register file. |
| $ref: /schemas/types.yaml#/definitions/phandle |
| |
| rockchip,php-grf: |
| description: |
| The phandle of the syscon node for the peripheral general register file. |
| $ref: /schemas/types.yaml#/definitions/phandle |
| |
| tx_delay: |
| description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| |
| rx_delay: |
| description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| |
| phy-supply: |
| description: PHY regulator |
| |
| required: |
| - compatible |
| - clocks |
| - clock-names |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/rk3288-cru.h> |
| |
| gmac: ethernet@ff290000 { |
| compatible = "rockchip,rk3288-gmac"; |
| reg = <0xff290000 0x10000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| clocks = <&cru SCLK_MAC>, |
| <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, |
| <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, |
| <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; |
| clock-names = "stmmaceth", |
| "mac_clk_rx", "mac_clk_tx", |
| "clk_mac_ref", "clk_mac_refout", |
| "aclk_mac", "pclk_mac"; |
| assigned-clocks = <&cru SCLK_MAC>; |
| assigned-clock-parents = <&ext_gmac>; |
| |
| rockchip,grf = <&grf>; |
| phy-mode = "rgmii"; |
| clock_in_out = "input"; |
| tx_delay = <0x30>; |
| rx_delay = <0x10>; |
| }; |