| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * c 2001 PPC 64 Team, IBM Corp |
| * |
| * /proc/powerpc/rtas/firmware_flash interface |
| * |
| * This file implements a firmware_flash interface to pump a firmware |
| * image into the kernel. At reboot time rtas_restart() will see the |
| * firmware image and flash it as it reboots (see rtas.c). |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/proc_fs.h> |
| #include <linux/reboot.h> |
| #include <asm/delay.h> |
| #include <linux/uaccess.h> |
| #include <asm/rtas.h> |
| |
| #define MODULE_VERS "1.0" |
| #define MODULE_NAME "rtas_flash" |
| |
| #define FIRMWARE_FLASH_NAME "firmware_flash" |
| #define FIRMWARE_UPDATE_NAME "firmware_update" |
| #define MANAGE_FLASH_NAME "manage_flash" |
| #define VALIDATE_FLASH_NAME "validate_flash" |
| |
| /* General RTAS Status Codes */ |
| #define RTAS_RC_SUCCESS 0 |
| #define RTAS_RC_HW_ERR -1 |
| #define RTAS_RC_BUSY -2 |
| |
| /* Flash image status values */ |
| #define FLASH_AUTH -9002 /* RTAS Not Service Authority Partition */ |
| #define FLASH_NO_OP -1099 /* No operation initiated by user */ |
| #define FLASH_IMG_SHORT -1005 /* Flash image shorter than expected */ |
| #define FLASH_IMG_BAD_LEN -1004 /* Bad length value in flash list block */ |
| #define FLASH_IMG_NULL_DATA -1003 /* Bad data value in flash list block */ |
| #define FLASH_IMG_READY 0 /* Firmware img ready for flash on reboot */ |
| |
| /* Manage image status values */ |
| #define MANAGE_AUTH -9002 /* RTAS Not Service Authority Partition */ |
| #define MANAGE_ACTIVE_ERR -9001 /* RTAS Cannot Overwrite Active Img */ |
| #define MANAGE_NO_OP -1099 /* No operation initiated by user */ |
| #define MANAGE_PARAM_ERR -3 /* RTAS Parameter Error */ |
| #define MANAGE_HW_ERR -1 /* RTAS Hardware Error */ |
| |
| /* Validate image status values */ |
| #define VALIDATE_AUTH -9002 /* RTAS Not Service Authority Partition */ |
| #define VALIDATE_NO_OP -1099 /* No operation initiated by the user */ |
| #define VALIDATE_INCOMPLETE -1002 /* User copied < VALIDATE_BUF_SIZE */ |
| #define VALIDATE_READY -1001 /* Firmware image ready for validation */ |
| #define VALIDATE_PARAM_ERR -3 /* RTAS Parameter Error */ |
| #define VALIDATE_HW_ERR -1 /* RTAS Hardware Error */ |
| |
| /* ibm,validate-flash-image update result tokens */ |
| #define VALIDATE_TMP_UPDATE 0 /* T side will be updated */ |
| #define VALIDATE_FLASH_AUTH 1 /* Partition does not have authority */ |
| #define VALIDATE_INVALID_IMG 2 /* Candidate image is not valid */ |
| #define VALIDATE_CUR_UNKNOWN 3 /* Current fixpack level is unknown */ |
| /* |
| * Current T side will be committed to P side before being replace with new |
| * image, and the new image is downlevel from current image |
| */ |
| #define VALIDATE_TMP_COMMIT_DL 4 |
| /* |
| * Current T side will be committed to P side before being replaced with new |
| * image |
| */ |
| #define VALIDATE_TMP_COMMIT 5 |
| /* |
| * T side will be updated with a downlevel image |
| */ |
| #define VALIDATE_TMP_UPDATE_DL 6 |
| /* |
| * The candidate image's release date is later than the system's firmware |
| * service entitlement date - service warranty period has expired |
| */ |
| #define VALIDATE_OUT_OF_WRNTY 7 |
| |
| /* ibm,manage-flash-image operation tokens */ |
| #define RTAS_REJECT_TMP_IMG 0 |
| #define RTAS_COMMIT_TMP_IMG 1 |
| |
| /* Array sizes */ |
| #define VALIDATE_BUF_SIZE 4096 |
| #define VALIDATE_MSG_LEN 256 |
| #define RTAS_MSG_MAXLEN 64 |
| |
| /* Quirk - RTAS requires 4k list length and block size */ |
| #define RTAS_BLKLIST_LENGTH 4096 |
| #define RTAS_BLK_SIZE 4096 |
| |
| struct flash_block { |
| char *data; |
| unsigned long length; |
| }; |
| |
| /* This struct is very similar but not identical to |
| * that needed by the rtas flash update. |
| * All we need to do for rtas is rewrite num_blocks |
| * into a version/length and translate the pointers |
| * to absolute. |
| */ |
| #define FLASH_BLOCKS_PER_NODE ((RTAS_BLKLIST_LENGTH - 16) / sizeof(struct flash_block)) |
| struct flash_block_list { |
| unsigned long num_blocks; |
| struct flash_block_list *next; |
| struct flash_block blocks[FLASH_BLOCKS_PER_NODE]; |
| }; |
| |
| static struct flash_block_list *rtas_firmware_flash_list; |
| |
| /* Use slab cache to guarantee 4k alignment */ |
| static struct kmem_cache *flash_block_cache = NULL; |
| |
| #define FLASH_BLOCK_LIST_VERSION (1UL) |
| |
| /* |
| * Local copy of the flash block list. |
| * |
| * The rtas_firmware_flash_list variable will be |
| * set once the data is fully read. |
| * |
| * For convenience as we build the list we use virtual addrs, |
| * we do not fill in the version number, and the length field |
| * is treated as the number of entries currently in the block |
| * (i.e. not a byte count). This is all fixed when calling |
| * the flash routine. |
| */ |
| |
| /* Status int must be first member of struct */ |
| struct rtas_update_flash_t |
| { |
| int status; /* Flash update status */ |
| struct flash_block_list *flist; /* Local copy of flash block list */ |
| }; |
| |
| /* Status int must be first member of struct */ |
| struct rtas_manage_flash_t |
| { |
| int status; /* Returned status */ |
| }; |
| |
| /* Status int must be first member of struct */ |
| struct rtas_validate_flash_t |
| { |
| int status; /* Returned status */ |
| char *buf; /* Candidate image buffer */ |
| unsigned int buf_size; /* Size of image buf */ |
| unsigned int update_results; /* Update results token */ |
| }; |
| |
| static struct rtas_update_flash_t rtas_update_flash_data; |
| static struct rtas_manage_flash_t rtas_manage_flash_data; |
| static struct rtas_validate_flash_t rtas_validate_flash_data; |
| static DEFINE_MUTEX(rtas_update_flash_mutex); |
| static DEFINE_MUTEX(rtas_manage_flash_mutex); |
| static DEFINE_MUTEX(rtas_validate_flash_mutex); |
| |
| /* Do simple sanity checks on the flash image. */ |
| static int flash_list_valid(struct flash_block_list *flist) |
| { |
| struct flash_block_list *f; |
| int i; |
| unsigned long block_size, image_size; |
| |
| /* Paranoid self test here. We also collect the image size. */ |
| image_size = 0; |
| for (f = flist; f; f = f->next) { |
| for (i = 0; i < f->num_blocks; i++) { |
| if (f->blocks[i].data == NULL) { |
| return FLASH_IMG_NULL_DATA; |
| } |
| block_size = f->blocks[i].length; |
| if (block_size <= 0 || block_size > RTAS_BLK_SIZE) { |
| return FLASH_IMG_BAD_LEN; |
| } |
| image_size += block_size; |
| } |
| } |
| |
| if (image_size < (256 << 10)) { |
| if (image_size < 2) |
| return FLASH_NO_OP; |
| } |
| |
| printk(KERN_INFO "FLASH: flash image with %ld bytes stored for hardware flash on reboot\n", image_size); |
| |
| return FLASH_IMG_READY; |
| } |
| |
| static void free_flash_list(struct flash_block_list *f) |
| { |
| struct flash_block_list *next; |
| int i; |
| |
| while (f) { |
| for (i = 0; i < f->num_blocks; i++) |
| kmem_cache_free(flash_block_cache, f->blocks[i].data); |
| next = f->next; |
| kmem_cache_free(flash_block_cache, f); |
| f = next; |
| } |
| } |
| |
| static int rtas_flash_release(struct inode *inode, struct file *file) |
| { |
| struct rtas_update_flash_t *const uf = &rtas_update_flash_data; |
| |
| mutex_lock(&rtas_update_flash_mutex); |
| |
| if (uf->flist) { |
| /* File was opened in write mode for a new flash attempt */ |
| /* Clear saved list */ |
| if (rtas_firmware_flash_list) { |
| free_flash_list(rtas_firmware_flash_list); |
| rtas_firmware_flash_list = NULL; |
| } |
| |
| if (uf->status != FLASH_AUTH) |
| uf->status = flash_list_valid(uf->flist); |
| |
| if (uf->status == FLASH_IMG_READY) |
| rtas_firmware_flash_list = uf->flist; |
| else |
| free_flash_list(uf->flist); |
| |
| uf->flist = NULL; |
| } |
| |
| mutex_unlock(&rtas_update_flash_mutex); |
| return 0; |
| } |
| |
| static size_t get_flash_status_msg(int status, char *buf) |
| { |
| const char *msg; |
| size_t len; |
| |
| switch (status) { |
| case FLASH_AUTH: |
| msg = "error: this partition does not have service authority\n"; |
| break; |
| case FLASH_NO_OP: |
| msg = "info: no firmware image for flash\n"; |
| break; |
| case FLASH_IMG_SHORT: |
| msg = "error: flash image short\n"; |
| break; |
| case FLASH_IMG_BAD_LEN: |
| msg = "error: internal error bad length\n"; |
| break; |
| case FLASH_IMG_NULL_DATA: |
| msg = "error: internal error null data\n"; |
| break; |
| case FLASH_IMG_READY: |
| msg = "ready: firmware image ready for flash on reboot\n"; |
| break; |
| default: |
| return sprintf(buf, "error: unexpected status value %d\n", |
| status); |
| } |
| |
| len = strlen(msg); |
| memcpy(buf, msg, len + 1); |
| return len; |
| } |
| |
| /* Reading the proc file will show status (not the firmware contents) */ |
| static ssize_t rtas_flash_read_msg(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct rtas_update_flash_t *const uf = &rtas_update_flash_data; |
| char msg[RTAS_MSG_MAXLEN]; |
| size_t len; |
| int status; |
| |
| mutex_lock(&rtas_update_flash_mutex); |
| status = uf->status; |
| mutex_unlock(&rtas_update_flash_mutex); |
| |
| /* Read as text message */ |
| len = get_flash_status_msg(status, msg); |
| return simple_read_from_buffer(buf, count, ppos, msg, len); |
| } |
| |
| static ssize_t rtas_flash_read_num(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct rtas_update_flash_t *const uf = &rtas_update_flash_data; |
| char msg[RTAS_MSG_MAXLEN]; |
| int status; |
| |
| mutex_lock(&rtas_update_flash_mutex); |
| status = uf->status; |
| mutex_unlock(&rtas_update_flash_mutex); |
| |
| /* Read as number */ |
| sprintf(msg, "%d\n", status); |
| return simple_read_from_buffer(buf, count, ppos, msg, strlen(msg)); |
| } |
| |
| /* We could be much more efficient here. But to keep this function |
| * simple we allocate a page to the block list no matter how small the |
| * count is. If the system is low on memory it will be just as well |
| * that we fail.... |
| */ |
| static ssize_t rtas_flash_write(struct file *file, const char __user *buffer, |
| size_t count, loff_t *off) |
| { |
| struct rtas_update_flash_t *const uf = &rtas_update_flash_data; |
| char *p; |
| int next_free, rc; |
| struct flash_block_list *fl; |
| |
| mutex_lock(&rtas_update_flash_mutex); |
| |
| if (uf->status == FLASH_AUTH || count == 0) |
| goto out; /* discard data */ |
| |
| /* In the case that the image is not ready for flashing, the memory |
| * allocated for the block list will be freed upon the release of the |
| * proc file |
| */ |
| if (uf->flist == NULL) { |
| uf->flist = kmem_cache_zalloc(flash_block_cache, GFP_KERNEL); |
| if (!uf->flist) |
| goto nomem; |
| } |
| |
| fl = uf->flist; |
| while (fl->next) |
| fl = fl->next; /* seek to last block_list for append */ |
| next_free = fl->num_blocks; |
| if (next_free == FLASH_BLOCKS_PER_NODE) { |
| /* Need to allocate another block_list */ |
| fl->next = kmem_cache_zalloc(flash_block_cache, GFP_KERNEL); |
| if (!fl->next) |
| goto nomem; |
| fl = fl->next; |
| next_free = 0; |
| } |
| |
| if (count > RTAS_BLK_SIZE) |
| count = RTAS_BLK_SIZE; |
| p = kmem_cache_zalloc(flash_block_cache, GFP_KERNEL); |
| if (!p) |
| goto nomem; |
| |
| if(copy_from_user(p, buffer, count)) { |
| kmem_cache_free(flash_block_cache, p); |
| rc = -EFAULT; |
| goto error; |
| } |
| fl->blocks[next_free].data = p; |
| fl->blocks[next_free].length = count; |
| fl->num_blocks++; |
| out: |
| mutex_unlock(&rtas_update_flash_mutex); |
| return count; |
| |
| nomem: |
| rc = -ENOMEM; |
| error: |
| mutex_unlock(&rtas_update_flash_mutex); |
| return rc; |
| } |
| |
| /* |
| * Flash management routines. |
| */ |
| static void manage_flash(struct rtas_manage_flash_t *args_buf, unsigned int op) |
| { |
| s32 rc; |
| |
| do { |
| rc = rtas_call(rtas_token("ibm,manage-flash-image"), 1, 1, |
| NULL, op); |
| } while (rtas_busy_delay(rc)); |
| |
| args_buf->status = rc; |
| } |
| |
| static ssize_t manage_flash_read(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct rtas_manage_flash_t *const args_buf = &rtas_manage_flash_data; |
| char msg[RTAS_MSG_MAXLEN]; |
| int msglen, status; |
| |
| mutex_lock(&rtas_manage_flash_mutex); |
| status = args_buf->status; |
| mutex_unlock(&rtas_manage_flash_mutex); |
| |
| msglen = sprintf(msg, "%d\n", status); |
| return simple_read_from_buffer(buf, count, ppos, msg, msglen); |
| } |
| |
| static ssize_t manage_flash_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *off) |
| { |
| struct rtas_manage_flash_t *const args_buf = &rtas_manage_flash_data; |
| static const char reject_str[] = "0"; |
| static const char commit_str[] = "1"; |
| char stkbuf[10]; |
| int op, rc; |
| |
| mutex_lock(&rtas_manage_flash_mutex); |
| |
| if ((args_buf->status == MANAGE_AUTH) || (count == 0)) |
| goto out; |
| |
| op = -1; |
| if (buf) { |
| if (count > 9) count = 9; |
| rc = -EFAULT; |
| if (copy_from_user (stkbuf, buf, count)) |
| goto error; |
| if (strncmp(stkbuf, reject_str, strlen(reject_str)) == 0) |
| op = RTAS_REJECT_TMP_IMG; |
| else if (strncmp(stkbuf, commit_str, strlen(commit_str)) == 0) |
| op = RTAS_COMMIT_TMP_IMG; |
| } |
| |
| if (op == -1) { /* buf is empty, or contains invalid string */ |
| rc = -EINVAL; |
| goto error; |
| } |
| |
| manage_flash(args_buf, op); |
| out: |
| mutex_unlock(&rtas_manage_flash_mutex); |
| return count; |
| |
| error: |
| mutex_unlock(&rtas_manage_flash_mutex); |
| return rc; |
| } |
| |
| /* |
| * Validation routines. |
| */ |
| static void validate_flash(struct rtas_validate_flash_t *args_buf) |
| { |
| int token = rtas_token("ibm,validate-flash-image"); |
| int update_results; |
| s32 rc; |
| |
| rc = 0; |
| do { |
| spin_lock(&rtas_data_buf_lock); |
| memcpy(rtas_data_buf, args_buf->buf, VALIDATE_BUF_SIZE); |
| rc = rtas_call(token, 2, 2, &update_results, |
| (u32) __pa(rtas_data_buf), args_buf->buf_size); |
| memcpy(args_buf->buf, rtas_data_buf, VALIDATE_BUF_SIZE); |
| spin_unlock(&rtas_data_buf_lock); |
| } while (rtas_busy_delay(rc)); |
| |
| args_buf->status = rc; |
| args_buf->update_results = update_results; |
| } |
| |
| static int get_validate_flash_msg(struct rtas_validate_flash_t *args_buf, |
| char *msg, int msglen) |
| { |
| int n; |
| |
| if (args_buf->status >= VALIDATE_TMP_UPDATE) { |
| n = sprintf(msg, "%d\n", args_buf->update_results); |
| if ((args_buf->update_results >= VALIDATE_CUR_UNKNOWN) || |
| (args_buf->update_results == VALIDATE_TMP_UPDATE)) |
| n += snprintf(msg + n, msglen - n, "%s\n", |
| args_buf->buf); |
| } else { |
| n = sprintf(msg, "%d\n", args_buf->status); |
| } |
| return n; |
| } |
| |
| static ssize_t validate_flash_read(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct rtas_validate_flash_t *const args_buf = |
| &rtas_validate_flash_data; |
| char msg[VALIDATE_MSG_LEN]; |
| int msglen; |
| |
| mutex_lock(&rtas_validate_flash_mutex); |
| msglen = get_validate_flash_msg(args_buf, msg, VALIDATE_MSG_LEN); |
| mutex_unlock(&rtas_validate_flash_mutex); |
| |
| return simple_read_from_buffer(buf, count, ppos, msg, msglen); |
| } |
| |
| static ssize_t validate_flash_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *off) |
| { |
| struct rtas_validate_flash_t *const args_buf = |
| &rtas_validate_flash_data; |
| int rc; |
| |
| mutex_lock(&rtas_validate_flash_mutex); |
| |
| /* We are only interested in the first 4K of the |
| * candidate image */ |
| if ((*off >= VALIDATE_BUF_SIZE) || |
| (args_buf->status == VALIDATE_AUTH)) { |
| *off += count; |
| mutex_unlock(&rtas_validate_flash_mutex); |
| return count; |
| } |
| |
| if (*off + count >= VALIDATE_BUF_SIZE) { |
| count = VALIDATE_BUF_SIZE - *off; |
| args_buf->status = VALIDATE_READY; |
| } else { |
| args_buf->status = VALIDATE_INCOMPLETE; |
| } |
| |
| if (!access_ok(buf, count)) { |
| rc = -EFAULT; |
| goto done; |
| } |
| if (copy_from_user(args_buf->buf + *off, buf, count)) { |
| rc = -EFAULT; |
| goto done; |
| } |
| |
| *off += count; |
| rc = count; |
| done: |
| mutex_unlock(&rtas_validate_flash_mutex); |
| return rc; |
| } |
| |
| static int validate_flash_release(struct inode *inode, struct file *file) |
| { |
| struct rtas_validate_flash_t *const args_buf = |
| &rtas_validate_flash_data; |
| |
| mutex_lock(&rtas_validate_flash_mutex); |
| |
| if (args_buf->status == VALIDATE_READY) { |
| args_buf->buf_size = VALIDATE_BUF_SIZE; |
| validate_flash(args_buf); |
| } |
| |
| mutex_unlock(&rtas_validate_flash_mutex); |
| return 0; |
| } |
| |
| /* |
| * On-reboot flash update applicator. |
| */ |
| static void rtas_flash_firmware(int reboot_type) |
| { |
| unsigned long image_size; |
| struct flash_block_list *f, *next, *flist; |
| unsigned long rtas_block_list; |
| int i, status, update_token; |
| |
| if (rtas_firmware_flash_list == NULL) |
| return; /* nothing to do */ |
| |
| if (reboot_type != SYS_RESTART) { |
| printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); |
| printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); |
| return; |
| } |
| |
| update_token = rtas_token("ibm,update-flash-64-and-reboot"); |
| if (update_token == RTAS_UNKNOWN_SERVICE) { |
| printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot " |
| "is not available -- not a service partition?\n"); |
| printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); |
| return; |
| } |
| |
| /* |
| * Just before starting the firmware flash, cancel the event scan work |
| * to avoid any soft lockup issues. |
| */ |
| rtas_cancel_event_scan(); |
| |
| /* |
| * NOTE: the "first" block must be under 4GB, so we create |
| * an entry with no data blocks in the reserved buffer in |
| * the kernel data segment. |
| */ |
| spin_lock(&rtas_data_buf_lock); |
| flist = (struct flash_block_list *)&rtas_data_buf[0]; |
| flist->num_blocks = 0; |
| flist->next = rtas_firmware_flash_list; |
| rtas_block_list = __pa(flist); |
| if (rtas_block_list >= 4UL*1024*1024*1024) { |
| printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); |
| spin_unlock(&rtas_data_buf_lock); |
| return; |
| } |
| |
| printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); |
| /* Update the block_list in place. */ |
| rtas_firmware_flash_list = NULL; /* too hard to backout on error */ |
| image_size = 0; |
| for (f = flist; f; f = next) { |
| /* Translate data addrs to absolute */ |
| for (i = 0; i < f->num_blocks; i++) { |
| f->blocks[i].data = (char *)cpu_to_be64(__pa(f->blocks[i].data)); |
| image_size += f->blocks[i].length; |
| f->blocks[i].length = cpu_to_be64(f->blocks[i].length); |
| } |
| next = f->next; |
| /* Don't translate NULL pointer for last entry */ |
| if (f->next) |
| f->next = (struct flash_block_list *)cpu_to_be64(__pa(f->next)); |
| else |
| f->next = NULL; |
| /* make num_blocks into the version/length field */ |
| f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); |
| f->num_blocks = cpu_to_be64(f->num_blocks); |
| } |
| |
| printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); |
| printk(KERN_ALERT "FLASH: performing flash and reboot\n"); |
| rtas_progress("Flashing \n", 0x0); |
| rtas_progress("Please Wait... ", 0x0); |
| printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); |
| status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); |
| switch (status) { /* should only get "bad" status */ |
| case 0: |
| printk(KERN_ALERT "FLASH: success\n"); |
| break; |
| case -1: |
| printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); |
| break; |
| case -3: |
| printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); |
| break; |
| case -4: |
| printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); |
| break; |
| default: |
| printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); |
| break; |
| } |
| spin_unlock(&rtas_data_buf_lock); |
| } |
| |
| /* |
| * Manifest of proc files to create |
| */ |
| struct rtas_flash_file { |
| const char *filename; |
| const char *rtas_call_name; |
| int *status; |
| const struct proc_ops ops; |
| }; |
| |
| static const struct rtas_flash_file rtas_flash_files[] = { |
| { |
| .filename = "powerpc/rtas/" FIRMWARE_FLASH_NAME, |
| .rtas_call_name = "ibm,update-flash-64-and-reboot", |
| .status = &rtas_update_flash_data.status, |
| .ops.proc_read = rtas_flash_read_msg, |
| .ops.proc_write = rtas_flash_write, |
| .ops.proc_release = rtas_flash_release, |
| .ops.proc_lseek = default_llseek, |
| }, |
| { |
| .filename = "powerpc/rtas/" FIRMWARE_UPDATE_NAME, |
| .rtas_call_name = "ibm,update-flash-64-and-reboot", |
| .status = &rtas_update_flash_data.status, |
| .ops.proc_read = rtas_flash_read_num, |
| .ops.proc_write = rtas_flash_write, |
| .ops.proc_release = rtas_flash_release, |
| .ops.proc_lseek = default_llseek, |
| }, |
| { |
| .filename = "powerpc/rtas/" VALIDATE_FLASH_NAME, |
| .rtas_call_name = "ibm,validate-flash-image", |
| .status = &rtas_validate_flash_data.status, |
| .ops.proc_read = validate_flash_read, |
| .ops.proc_write = validate_flash_write, |
| .ops.proc_release = validate_flash_release, |
| .ops.proc_lseek = default_llseek, |
| }, |
| { |
| .filename = "powerpc/rtas/" MANAGE_FLASH_NAME, |
| .rtas_call_name = "ibm,manage-flash-image", |
| .status = &rtas_manage_flash_data.status, |
| .ops.proc_read = manage_flash_read, |
| .ops.proc_write = manage_flash_write, |
| .ops.proc_lseek = default_llseek, |
| } |
| }; |
| |
| static int __init rtas_flash_init(void) |
| { |
| int i; |
| |
| if (rtas_token("ibm,update-flash-64-and-reboot") == |
| RTAS_UNKNOWN_SERVICE) { |
| pr_info("rtas_flash: no firmware flash support\n"); |
| return -EINVAL; |
| } |
| |
| rtas_validate_flash_data.buf = kzalloc(VALIDATE_BUF_SIZE, GFP_KERNEL); |
| if (!rtas_validate_flash_data.buf) |
| return -ENOMEM; |
| |
| flash_block_cache = kmem_cache_create("rtas_flash_cache", |
| RTAS_BLK_SIZE, RTAS_BLK_SIZE, 0, |
| NULL); |
| if (!flash_block_cache) { |
| printk(KERN_ERR "%s: failed to create block cache\n", |
| __func__); |
| goto enomem_buf; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(rtas_flash_files); i++) { |
| const struct rtas_flash_file *f = &rtas_flash_files[i]; |
| int token; |
| |
| if (!proc_create(f->filename, 0600, NULL, &f->ops)) |
| goto enomem; |
| |
| /* |
| * This code assumes that the status int is the first member of the |
| * struct |
| */ |
| token = rtas_token(f->rtas_call_name); |
| if (token == RTAS_UNKNOWN_SERVICE) |
| *f->status = FLASH_AUTH; |
| else |
| *f->status = FLASH_NO_OP; |
| } |
| |
| rtas_flash_term_hook = rtas_flash_firmware; |
| return 0; |
| |
| enomem: |
| while (--i >= 0) { |
| const struct rtas_flash_file *f = &rtas_flash_files[i]; |
| remove_proc_entry(f->filename, NULL); |
| } |
| |
| kmem_cache_destroy(flash_block_cache); |
| enomem_buf: |
| kfree(rtas_validate_flash_data.buf); |
| return -ENOMEM; |
| } |
| |
| static void __exit rtas_flash_cleanup(void) |
| { |
| int i; |
| |
| rtas_flash_term_hook = NULL; |
| |
| if (rtas_firmware_flash_list) { |
| free_flash_list(rtas_firmware_flash_list); |
| rtas_firmware_flash_list = NULL; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(rtas_flash_files); i++) { |
| const struct rtas_flash_file *f = &rtas_flash_files[i]; |
| remove_proc_entry(f->filename, NULL); |
| } |
| |
| kmem_cache_destroy(flash_block_cache); |
| kfree(rtas_validate_flash_data.buf); |
| } |
| |
| module_init(rtas_flash_init); |
| module_exit(rtas_flash_cleanup); |
| MODULE_LICENSE("GPL"); |