| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Console driver for LCD2S 4x20 character displays connected through i2c. |
| * The display also has a SPI interface, but the driver does not support |
| * this yet. |
| * |
| * This is a driver allowing you to use a LCD2S 4x20 from Modtronix |
| * engineering as auxdisplay character device. |
| * |
| * (C) 2019 by Lemonage Software GmbH |
| * Author: Lars Pöschel <poeschel@lemonage.de> |
| * All rights reserved. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/property.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| |
| #include "charlcd.h" |
| |
| #define LCD2S_CMD_CUR_MOVES_FWD 0x09 |
| #define LCD2S_CMD_CUR_BLINK_OFF 0x10 |
| #define LCD2S_CMD_CUR_UL_OFF 0x11 |
| #define LCD2S_CMD_DISPLAY_OFF 0x12 |
| #define LCD2S_CMD_CUR_BLINK_ON 0x18 |
| #define LCD2S_CMD_CUR_UL_ON 0x19 |
| #define LCD2S_CMD_DISPLAY_ON 0x1a |
| #define LCD2S_CMD_BACKLIGHT_OFF 0x20 |
| #define LCD2S_CMD_BACKLIGHT_ON 0x28 |
| #define LCD2S_CMD_WRITE 0x80 |
| #define LCD2S_CMD_MOV_CUR_RIGHT 0x83 |
| #define LCD2S_CMD_MOV_CUR_LEFT 0x84 |
| #define LCD2S_CMD_SHIFT_RIGHT 0x85 |
| #define LCD2S_CMD_SHIFT_LEFT 0x86 |
| #define LCD2S_CMD_SHIFT_UP 0x87 |
| #define LCD2S_CMD_SHIFT_DOWN 0x88 |
| #define LCD2S_CMD_CUR_ADDR 0x89 |
| #define LCD2S_CMD_CUR_POS 0x8a |
| #define LCD2S_CMD_CUR_RESET 0x8b |
| #define LCD2S_CMD_CLEAR 0x8c |
| #define LCD2S_CMD_DEF_CUSTOM_CHAR 0x92 |
| #define LCD2S_CMD_READ_STATUS 0xd0 |
| |
| #define LCD2S_CHARACTER_SIZE 8 |
| |
| #define LCD2S_STATUS_BUF_MASK 0x7f |
| |
| struct lcd2s_data { |
| struct i2c_client *i2c; |
| struct charlcd *charlcd; |
| }; |
| |
| static s32 lcd2s_wait_buf_free(const struct i2c_client *client, int count) |
| { |
| s32 status; |
| |
| status = i2c_smbus_read_byte_data(client, LCD2S_CMD_READ_STATUS); |
| if (status < 0) |
| return status; |
| |
| while ((status & LCD2S_STATUS_BUF_MASK) < count) { |
| mdelay(1); |
| status = i2c_smbus_read_byte_data(client, |
| LCD2S_CMD_READ_STATUS); |
| if (status < 0) |
| return status; |
| } |
| return 0; |
| } |
| |
| static int lcd2s_i2c_master_send(const struct i2c_client *client, |
| const char *buf, int count) |
| { |
| s32 status; |
| |
| status = lcd2s_wait_buf_free(client, count); |
| if (status < 0) |
| return status; |
| |
| return i2c_master_send(client, buf, count); |
| } |
| |
| static int lcd2s_i2c_smbus_write_byte(const struct i2c_client *client, u8 value) |
| { |
| s32 status; |
| |
| status = lcd2s_wait_buf_free(client, 1); |
| if (status < 0) |
| return status; |
| |
| return i2c_smbus_write_byte(client, value); |
| } |
| |
| static int lcd2s_print(struct charlcd *lcd, int c) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| u8 buf[2] = { LCD2S_CMD_WRITE, c }; |
| |
| lcd2s_i2c_master_send(lcd2s->i2c, buf, sizeof(buf)); |
| return 0; |
| } |
| |
| static int lcd2s_gotoxy(struct charlcd *lcd, unsigned int x, unsigned int y) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| u8 buf[3] = { LCD2S_CMD_CUR_POS, y + 1, x + 1 }; |
| |
| lcd2s_i2c_master_send(lcd2s->i2c, buf, sizeof(buf)); |
| |
| return 0; |
| } |
| |
| static int lcd2s_home(struct charlcd *lcd) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_RESET); |
| return 0; |
| } |
| |
| static int lcd2s_init_display(struct charlcd *lcd) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| |
| /* turn everything off, but display on */ |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_DISPLAY_ON); |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_BACKLIGHT_OFF); |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_MOVES_FWD); |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_BLINK_OFF); |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_UL_OFF); |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CLEAR); |
| |
| return 0; |
| } |
| |
| static int lcd2s_shift_cursor(struct charlcd *lcd, enum charlcd_shift_dir dir) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| |
| if (dir == CHARLCD_SHIFT_LEFT) |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_MOV_CUR_LEFT); |
| else |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_MOV_CUR_RIGHT); |
| |
| return 0; |
| } |
| |
| static int lcd2s_shift_display(struct charlcd *lcd, enum charlcd_shift_dir dir) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| |
| if (dir == CHARLCD_SHIFT_LEFT) |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_SHIFT_LEFT); |
| else |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_SHIFT_RIGHT); |
| |
| return 0; |
| } |
| |
| static void lcd2s_backlight(struct charlcd *lcd, enum charlcd_onoff on) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| |
| if (on) |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_BACKLIGHT_ON); |
| else |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_BACKLIGHT_OFF); |
| } |
| |
| static int lcd2s_display(struct charlcd *lcd, enum charlcd_onoff on) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| |
| if (on) |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_DISPLAY_ON); |
| else |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_DISPLAY_OFF); |
| |
| return 0; |
| } |
| |
| static int lcd2s_cursor(struct charlcd *lcd, enum charlcd_onoff on) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| |
| if (on) |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_UL_ON); |
| else |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_UL_OFF); |
| |
| return 0; |
| } |
| |
| static int lcd2s_blink(struct charlcd *lcd, enum charlcd_onoff on) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| |
| if (on) |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_BLINK_ON); |
| else |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_BLINK_OFF); |
| |
| return 0; |
| } |
| |
| static int lcd2s_fontsize(struct charlcd *lcd, enum charlcd_fontsize size) |
| { |
| return 0; |
| } |
| |
| static int lcd2s_lines(struct charlcd *lcd, enum charlcd_lines lines) |
| { |
| return 0; |
| } |
| |
| /* |
| * Generator: LGcxxxxx...xx; must have <c> between '0' and '7', |
| * representing the numerical ASCII code of the redefined character, |
| * and <xx...xx> a sequence of 16 hex digits representing 8 bytes |
| * for each character. Most LCDs will only use 5 lower bits of |
| * the 7 first bytes. |
| */ |
| static int lcd2s_redefine_char(struct charlcd *lcd, char *esc) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| u8 buf[LCD2S_CHARACTER_SIZE + 2] = { LCD2S_CMD_DEF_CUSTOM_CHAR }; |
| u8 value; |
| int shift, i; |
| |
| if (!strchr(esc, ';')) |
| return 0; |
| |
| esc++; |
| |
| buf[1] = *(esc++) - '0'; |
| if (buf[1] > 7) |
| return 1; |
| |
| i = 2; |
| shift = 0; |
| value = 0; |
| while (*esc && i < LCD2S_CHARACTER_SIZE + 2) { |
| int half; |
| |
| shift ^= 4; |
| half = hex_to_bin(*esc++); |
| if (half < 0) |
| continue; |
| |
| value |= half << shift; |
| if (shift == 0) { |
| buf[i++] = value; |
| value = 0; |
| } |
| } |
| |
| lcd2s_i2c_master_send(lcd2s->i2c, buf, sizeof(buf)); |
| return 1; |
| } |
| |
| static int lcd2s_clear_display(struct charlcd *lcd) |
| { |
| struct lcd2s_data *lcd2s = lcd->drvdata; |
| |
| /* This implicitly sets cursor to first row and column */ |
| lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CLEAR); |
| return 0; |
| } |
| |
| static const struct charlcd_ops lcd2s_ops = { |
| .print = lcd2s_print, |
| .backlight = lcd2s_backlight, |
| .gotoxy = lcd2s_gotoxy, |
| .home = lcd2s_home, |
| .clear_display = lcd2s_clear_display, |
| .init_display = lcd2s_init_display, |
| .shift_cursor = lcd2s_shift_cursor, |
| .shift_display = lcd2s_shift_display, |
| .display = lcd2s_display, |
| .cursor = lcd2s_cursor, |
| .blink = lcd2s_blink, |
| .fontsize = lcd2s_fontsize, |
| .lines = lcd2s_lines, |
| .redefine_char = lcd2s_redefine_char, |
| }; |
| |
| static int lcd2s_i2c_probe(struct i2c_client *i2c) |
| { |
| struct charlcd *lcd; |
| struct lcd2s_data *lcd2s; |
| int err; |
| |
| if (!i2c_check_functionality(i2c->adapter, |
| I2C_FUNC_SMBUS_WRITE_BYTE_DATA | |
| I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)) |
| return -EIO; |
| |
| lcd2s = devm_kzalloc(&i2c->dev, sizeof(*lcd2s), GFP_KERNEL); |
| if (!lcd2s) |
| return -ENOMEM; |
| |
| /* Test, if the display is responding */ |
| err = lcd2s_i2c_smbus_write_byte(i2c, LCD2S_CMD_DISPLAY_OFF); |
| if (err < 0) |
| return err; |
| |
| lcd = charlcd_alloc(); |
| if (!lcd) |
| return -ENOMEM; |
| |
| lcd->drvdata = lcd2s; |
| lcd2s->i2c = i2c; |
| lcd2s->charlcd = lcd; |
| |
| /* Required properties */ |
| err = device_property_read_u32(&i2c->dev, "display-height-chars", |
| &lcd->height); |
| if (err) |
| goto fail1; |
| |
| err = device_property_read_u32(&i2c->dev, "display-width-chars", |
| &lcd->width); |
| if (err) |
| goto fail1; |
| |
| lcd->ops = &lcd2s_ops; |
| |
| err = charlcd_register(lcd2s->charlcd); |
| if (err) |
| goto fail1; |
| |
| i2c_set_clientdata(i2c, lcd2s); |
| return 0; |
| |
| fail1: |
| charlcd_free(lcd2s->charlcd); |
| return err; |
| } |
| |
| static void lcd2s_i2c_remove(struct i2c_client *i2c) |
| { |
| struct lcd2s_data *lcd2s = i2c_get_clientdata(i2c); |
| |
| charlcd_unregister(lcd2s->charlcd); |
| charlcd_free(lcd2s->charlcd); |
| } |
| |
| static const struct i2c_device_id lcd2s_i2c_id[] = { |
| { "lcd2s", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lcd2s_i2c_id); |
| |
| static const struct of_device_id lcd2s_of_table[] = { |
| { .compatible = "modtronix,lcd2s" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, lcd2s_of_table); |
| |
| static struct i2c_driver lcd2s_i2c_driver = { |
| .driver = { |
| .name = "lcd2s", |
| .of_match_table = lcd2s_of_table, |
| }, |
| .probe_new = lcd2s_i2c_probe, |
| .remove = lcd2s_i2c_remove, |
| .id_table = lcd2s_i2c_id, |
| }; |
| module_i2c_driver(lcd2s_i2c_driver); |
| |
| MODULE_DESCRIPTION("LCD2S character display driver"); |
| MODULE_AUTHOR("Lars Poeschel"); |
| MODULE_LICENSE("GPL"); |