| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (C) 2020 Daniel Palmer<daniel@thingy.jp> */ |
| |
| #include <linux/bitops.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_irq.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #include <dt-bindings/gpio/msc313-gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| #define DRIVER_NAME "gpio-msc313" |
| |
| #define MSC313_GPIO_IN BIT(0) |
| #define MSC313_GPIO_OUT BIT(4) |
| #define MSC313_GPIO_OEN BIT(5) |
| |
| /* |
| * These bits need to be saved to correctly restore the |
| * gpio state when resuming from suspend to memory. |
| */ |
| #define MSC313_GPIO_BITSTOSAVE (MSC313_GPIO_OUT | MSC313_GPIO_OEN) |
| |
| /* pad names for fuart, same for all SoCs so far */ |
| #define MSC313_PINNAME_FUART_RX "fuart_rx" |
| #define MSC313_PINNAME_FUART_TX "fuart_tx" |
| #define MSC313_PINNAME_FUART_CTS "fuart_cts" |
| #define MSC313_PINNAME_FUART_RTS "fuart_rts" |
| |
| /* pad names for sr, mercury5 is different */ |
| #define MSC313_PINNAME_SR_IO2 "sr_io2" |
| #define MSC313_PINNAME_SR_IO3 "sr_io3" |
| #define MSC313_PINNAME_SR_IO4 "sr_io4" |
| #define MSC313_PINNAME_SR_IO5 "sr_io5" |
| #define MSC313_PINNAME_SR_IO6 "sr_io6" |
| #define MSC313_PINNAME_SR_IO7 "sr_io7" |
| #define MSC313_PINNAME_SR_IO8 "sr_io8" |
| #define MSC313_PINNAME_SR_IO9 "sr_io9" |
| #define MSC313_PINNAME_SR_IO10 "sr_io10" |
| #define MSC313_PINNAME_SR_IO11 "sr_io11" |
| #define MSC313_PINNAME_SR_IO12 "sr_io12" |
| #define MSC313_PINNAME_SR_IO13 "sr_io13" |
| #define MSC313_PINNAME_SR_IO14 "sr_io14" |
| #define MSC313_PINNAME_SR_IO15 "sr_io15" |
| #define MSC313_PINNAME_SR_IO16 "sr_io16" |
| #define MSC313_PINNAME_SR_IO17 "sr_io17" |
| |
| /* pad names for sd, same for all SoCs so far */ |
| #define MSC313_PINNAME_SD_CLK "sd_clk" |
| #define MSC313_PINNAME_SD_CMD "sd_cmd" |
| #define MSC313_PINNAME_SD_D0 "sd_d0" |
| #define MSC313_PINNAME_SD_D1 "sd_d1" |
| #define MSC313_PINNAME_SD_D2 "sd_d2" |
| #define MSC313_PINNAME_SD_D3 "sd_d3" |
| |
| /* pad names for i2c1, same for all SoCs so for */ |
| #define MSC313_PINNAME_I2C1_SCL "i2c1_scl" |
| #define MSC313_PINNAME_I2C1_SCA "i2c1_sda" |
| |
| /* pad names for spi0, same for all SoCs so far */ |
| #define MSC313_PINNAME_SPI0_CZ "spi0_cz" |
| #define MSC313_PINNAME_SPI0_CK "spi0_ck" |
| #define MSC313_PINNAME_SPI0_DI "spi0_di" |
| #define MSC313_PINNAME_SPI0_DO "spi0_do" |
| |
| #define FUART_NAMES \ |
| MSC313_PINNAME_FUART_RX, \ |
| MSC313_PINNAME_FUART_TX, \ |
| MSC313_PINNAME_FUART_CTS, \ |
| MSC313_PINNAME_FUART_RTS |
| |
| #define OFF_FUART_RX 0x50 |
| #define OFF_FUART_TX 0x54 |
| #define OFF_FUART_CTS 0x58 |
| #define OFF_FUART_RTS 0x5c |
| |
| #define FUART_OFFSETS \ |
| OFF_FUART_RX, \ |
| OFF_FUART_TX, \ |
| OFF_FUART_CTS, \ |
| OFF_FUART_RTS |
| |
| #define SR_NAMES \ |
| MSC313_PINNAME_SR_IO2, \ |
| MSC313_PINNAME_SR_IO3, \ |
| MSC313_PINNAME_SR_IO4, \ |
| MSC313_PINNAME_SR_IO5, \ |
| MSC313_PINNAME_SR_IO6, \ |
| MSC313_PINNAME_SR_IO7, \ |
| MSC313_PINNAME_SR_IO8, \ |
| MSC313_PINNAME_SR_IO9, \ |
| MSC313_PINNAME_SR_IO10, \ |
| MSC313_PINNAME_SR_IO11, \ |
| MSC313_PINNAME_SR_IO12, \ |
| MSC313_PINNAME_SR_IO13, \ |
| MSC313_PINNAME_SR_IO14, \ |
| MSC313_PINNAME_SR_IO15, \ |
| MSC313_PINNAME_SR_IO16, \ |
| MSC313_PINNAME_SR_IO17 |
| |
| #define OFF_SR_IO2 0x88 |
| #define OFF_SR_IO3 0x8c |
| #define OFF_SR_IO4 0x90 |
| #define OFF_SR_IO5 0x94 |
| #define OFF_SR_IO6 0x98 |
| #define OFF_SR_IO7 0x9c |
| #define OFF_SR_IO8 0xa0 |
| #define OFF_SR_IO9 0xa4 |
| #define OFF_SR_IO10 0xa8 |
| #define OFF_SR_IO11 0xac |
| #define OFF_SR_IO12 0xb0 |
| #define OFF_SR_IO13 0xb4 |
| #define OFF_SR_IO14 0xb8 |
| #define OFF_SR_IO15 0xbc |
| #define OFF_SR_IO16 0xc0 |
| #define OFF_SR_IO17 0xc4 |
| |
| #define SR_OFFSETS \ |
| OFF_SR_IO2, \ |
| OFF_SR_IO3, \ |
| OFF_SR_IO4, \ |
| OFF_SR_IO5, \ |
| OFF_SR_IO6, \ |
| OFF_SR_IO7, \ |
| OFF_SR_IO8, \ |
| OFF_SR_IO9, \ |
| OFF_SR_IO10, \ |
| OFF_SR_IO11, \ |
| OFF_SR_IO12, \ |
| OFF_SR_IO13, \ |
| OFF_SR_IO14, \ |
| OFF_SR_IO15, \ |
| OFF_SR_IO16, \ |
| OFF_SR_IO17 |
| |
| #define SD_NAMES \ |
| MSC313_PINNAME_SD_CLK, \ |
| MSC313_PINNAME_SD_CMD, \ |
| MSC313_PINNAME_SD_D0, \ |
| MSC313_PINNAME_SD_D1, \ |
| MSC313_PINNAME_SD_D2, \ |
| MSC313_PINNAME_SD_D3 |
| |
| #define OFF_SD_CLK 0x140 |
| #define OFF_SD_CMD 0x144 |
| #define OFF_SD_D0 0x148 |
| #define OFF_SD_D1 0x14c |
| #define OFF_SD_D2 0x150 |
| #define OFF_SD_D3 0x154 |
| |
| #define SD_OFFSETS \ |
| OFF_SD_CLK, \ |
| OFF_SD_CMD, \ |
| OFF_SD_D0, \ |
| OFF_SD_D1, \ |
| OFF_SD_D2, \ |
| OFF_SD_D3 |
| |
| #define I2C1_NAMES \ |
| MSC313_PINNAME_I2C1_SCL, \ |
| MSC313_PINNAME_I2C1_SCA |
| |
| #define OFF_I2C1_SCL 0x188 |
| #define OFF_I2C1_SCA 0x18c |
| |
| #define I2C1_OFFSETS \ |
| OFF_I2C1_SCL, \ |
| OFF_I2C1_SCA |
| |
| #define SPI0_NAMES \ |
| MSC313_PINNAME_SPI0_CZ, \ |
| MSC313_PINNAME_SPI0_CK, \ |
| MSC313_PINNAME_SPI0_DI, \ |
| MSC313_PINNAME_SPI0_DO |
| |
| #define OFF_SPI0_CZ 0x1c0 |
| #define OFF_SPI0_CK 0x1c4 |
| #define OFF_SPI0_DI 0x1c8 |
| #define OFF_SPI0_DO 0x1cc |
| |
| #define SPI0_OFFSETS \ |
| OFF_SPI0_CZ, \ |
| OFF_SPI0_CK, \ |
| OFF_SPI0_DI, \ |
| OFF_SPI0_DO |
| |
| struct msc313_gpio_data { |
| const char * const *names; |
| const unsigned int *offsets; |
| const unsigned int num; |
| }; |
| |
| #define MSC313_GPIO_CHIPDATA(_chip) \ |
| static const struct msc313_gpio_data _chip##_data = { \ |
| .names = _chip##_names, \ |
| .offsets = _chip##_offsets, \ |
| .num = ARRAY_SIZE(_chip##_offsets), \ |
| } |
| |
| #ifdef CONFIG_MACH_INFINITY |
| static const char * const msc313_names[] = { |
| FUART_NAMES, |
| SR_NAMES, |
| SD_NAMES, |
| I2C1_NAMES, |
| SPI0_NAMES, |
| }; |
| |
| static const unsigned int msc313_offsets[] = { |
| FUART_OFFSETS, |
| SR_OFFSETS, |
| SD_OFFSETS, |
| I2C1_OFFSETS, |
| SPI0_OFFSETS, |
| }; |
| |
| MSC313_GPIO_CHIPDATA(msc313); |
| |
| /* |
| * Unlike the msc313(e) the ssd20xd have a bunch of pins |
| * that are actually called gpio probably because they |
| * have no dedicated function. |
| */ |
| #define SSD20XD_PINNAME_GPIO0 "gpio0" |
| #define SSD20XD_PINNAME_GPIO1 "gpio1" |
| #define SSD20XD_PINNAME_GPIO2 "gpio2" |
| #define SSD20XD_PINNAME_GPIO3 "gpio3" |
| #define SSD20XD_PINNAME_GPIO4 "gpio4" |
| #define SSD20XD_PINNAME_GPIO5 "gpio5" |
| #define SSD20XD_PINNAME_GPIO6 "gpio6" |
| #define SSD20XD_PINNAME_GPIO7 "gpio7" |
| #define SSD20XD_PINNAME_GPIO10 "gpio10" |
| #define SSD20XD_PINNAME_GPIO11 "gpio11" |
| #define SSD20XD_PINNAME_GPIO12 "gpio12" |
| #define SSD20XD_PINNAME_GPIO13 "gpio13" |
| #define SSD20XD_PINNAME_GPIO14 "gpio14" |
| #define SSD20XD_PINNAME_GPIO85 "gpio85" |
| #define SSD20XD_PINNAME_GPIO86 "gpio86" |
| #define SSD20XD_PINNAME_GPIO90 "gpio90" |
| |
| #define SSD20XD_GPIO_NAMES SSD20XD_PINNAME_GPIO0, \ |
| SSD20XD_PINNAME_GPIO1, \ |
| SSD20XD_PINNAME_GPIO2, \ |
| SSD20XD_PINNAME_GPIO3, \ |
| SSD20XD_PINNAME_GPIO4, \ |
| SSD20XD_PINNAME_GPIO5, \ |
| SSD20XD_PINNAME_GPIO6, \ |
| SSD20XD_PINNAME_GPIO7, \ |
| SSD20XD_PINNAME_GPIO10, \ |
| SSD20XD_PINNAME_GPIO11, \ |
| SSD20XD_PINNAME_GPIO12, \ |
| SSD20XD_PINNAME_GPIO13, \ |
| SSD20XD_PINNAME_GPIO14, \ |
| SSD20XD_PINNAME_GPIO85, \ |
| SSD20XD_PINNAME_GPIO86, \ |
| SSD20XD_PINNAME_GPIO90 |
| |
| #define SSD20XD_GPIO_OFF_GPIO0 0x0 |
| #define SSD20XD_GPIO_OFF_GPIO1 0x4 |
| #define SSD20XD_GPIO_OFF_GPIO2 0x8 |
| #define SSD20XD_GPIO_OFF_GPIO3 0xc |
| #define SSD20XD_GPIO_OFF_GPIO4 0x10 |
| #define SSD20XD_GPIO_OFF_GPIO5 0x14 |
| #define SSD20XD_GPIO_OFF_GPIO6 0x18 |
| #define SSD20XD_GPIO_OFF_GPIO7 0x1c |
| #define SSD20XD_GPIO_OFF_GPIO10 0x28 |
| #define SSD20XD_GPIO_OFF_GPIO11 0x2c |
| #define SSD20XD_GPIO_OFF_GPIO12 0x30 |
| #define SSD20XD_GPIO_OFF_GPIO13 0x34 |
| #define SSD20XD_GPIO_OFF_GPIO14 0x38 |
| #define SSD20XD_GPIO_OFF_GPIO85 0x100 |
| #define SSD20XD_GPIO_OFF_GPIO86 0x104 |
| #define SSD20XD_GPIO_OFF_GPIO90 0x114 |
| |
| #define SSD20XD_GPIO_OFFSETS SSD20XD_GPIO_OFF_GPIO0, \ |
| SSD20XD_GPIO_OFF_GPIO1, \ |
| SSD20XD_GPIO_OFF_GPIO2, \ |
| SSD20XD_GPIO_OFF_GPIO3, \ |
| SSD20XD_GPIO_OFF_GPIO4, \ |
| SSD20XD_GPIO_OFF_GPIO5, \ |
| SSD20XD_GPIO_OFF_GPIO6, \ |
| SSD20XD_GPIO_OFF_GPIO7, \ |
| SSD20XD_GPIO_OFF_GPIO10, \ |
| SSD20XD_GPIO_OFF_GPIO11, \ |
| SSD20XD_GPIO_OFF_GPIO12, \ |
| SSD20XD_GPIO_OFF_GPIO13, \ |
| SSD20XD_GPIO_OFF_GPIO14, \ |
| SSD20XD_GPIO_OFF_GPIO85, \ |
| SSD20XD_GPIO_OFF_GPIO86, \ |
| SSD20XD_GPIO_OFF_GPIO90 |
| |
| /* "ttl" pins lcd interface pins */ |
| #define SSD20XD_PINNAME_TTL0 "ttl0" |
| #define SSD20XD_PINNAME_TTL1 "ttl1" |
| #define SSD20XD_PINNAME_TTL2 "ttl2" |
| #define SSD20XD_PINNAME_TTL3 "ttl3" |
| #define SSD20XD_PINNAME_TTL4 "ttl4" |
| #define SSD20XD_PINNAME_TTL5 "ttl5" |
| #define SSD20XD_PINNAME_TTL6 "ttl6" |
| #define SSD20XD_PINNAME_TTL7 "ttl7" |
| #define SSD20XD_PINNAME_TTL8 "ttl8" |
| #define SSD20XD_PINNAME_TTL9 "ttl9" |
| #define SSD20XD_PINNAME_TTL10 "ttl10" |
| #define SSD20XD_PINNAME_TTL11 "ttl11" |
| #define SSD20XD_PINNAME_TTL12 "ttl12" |
| #define SSD20XD_PINNAME_TTL13 "ttl13" |
| #define SSD20XD_PINNAME_TTL14 "ttl14" |
| #define SSD20XD_PINNAME_TTL15 "ttl15" |
| #define SSD20XD_PINNAME_TTL16 "ttl16" |
| #define SSD20XD_PINNAME_TTL17 "ttl17" |
| #define SSD20XD_PINNAME_TTL18 "ttl18" |
| #define SSD20XD_PINNAME_TTL19 "ttl19" |
| #define SSD20XD_PINNAME_TTL20 "ttl20" |
| #define SSD20XD_PINNAME_TTL21 "ttl21" |
| #define SSD20XD_PINNAME_TTL22 "ttl22" |
| #define SSD20XD_PINNAME_TTL23 "ttl23" |
| #define SSD20XD_PINNAME_TTL24 "ttl24" |
| #define SSD20XD_PINNAME_TTL25 "ttl25" |
| #define SSD20XD_PINNAME_TTL26 "ttl26" |
| #define SSD20XD_PINNAME_TTL27 "ttl27" |
| |
| #define SSD20XD_TTL_PINNAMES SSD20XD_PINNAME_TTL0, \ |
| SSD20XD_PINNAME_TTL1, \ |
| SSD20XD_PINNAME_TTL2, \ |
| SSD20XD_PINNAME_TTL3, \ |
| SSD20XD_PINNAME_TTL4, \ |
| SSD20XD_PINNAME_TTL5, \ |
| SSD20XD_PINNAME_TTL6, \ |
| SSD20XD_PINNAME_TTL7, \ |
| SSD20XD_PINNAME_TTL8, \ |
| SSD20XD_PINNAME_TTL9, \ |
| SSD20XD_PINNAME_TTL10, \ |
| SSD20XD_PINNAME_TTL11, \ |
| SSD20XD_PINNAME_TTL12, \ |
| SSD20XD_PINNAME_TTL13, \ |
| SSD20XD_PINNAME_TTL14, \ |
| SSD20XD_PINNAME_TTL15, \ |
| SSD20XD_PINNAME_TTL16, \ |
| SSD20XD_PINNAME_TTL17, \ |
| SSD20XD_PINNAME_TTL18, \ |
| SSD20XD_PINNAME_TTL19, \ |
| SSD20XD_PINNAME_TTL20, \ |
| SSD20XD_PINNAME_TTL21, \ |
| SSD20XD_PINNAME_TTL22, \ |
| SSD20XD_PINNAME_TTL23, \ |
| SSD20XD_PINNAME_TTL24, \ |
| SSD20XD_PINNAME_TTL25, \ |
| SSD20XD_PINNAME_TTL26, \ |
| SSD20XD_PINNAME_TTL27 |
| |
| #define SSD20XD_TTL_OFFSET_TTL0 0x80 |
| #define SSD20XD_TTL_OFFSET_TTL1 0x84 |
| #define SSD20XD_TTL_OFFSET_TTL2 0x88 |
| #define SSD20XD_TTL_OFFSET_TTL3 0x8c |
| #define SSD20XD_TTL_OFFSET_TTL4 0x90 |
| #define SSD20XD_TTL_OFFSET_TTL5 0x94 |
| #define SSD20XD_TTL_OFFSET_TTL6 0x98 |
| #define SSD20XD_TTL_OFFSET_TTL7 0x9c |
| #define SSD20XD_TTL_OFFSET_TTL8 0xa0 |
| #define SSD20XD_TTL_OFFSET_TTL9 0xa4 |
| #define SSD20XD_TTL_OFFSET_TTL10 0xa8 |
| #define SSD20XD_TTL_OFFSET_TTL11 0xac |
| #define SSD20XD_TTL_OFFSET_TTL12 0xb0 |
| #define SSD20XD_TTL_OFFSET_TTL13 0xb4 |
| #define SSD20XD_TTL_OFFSET_TTL14 0xb8 |
| #define SSD20XD_TTL_OFFSET_TTL15 0xbc |
| #define SSD20XD_TTL_OFFSET_TTL16 0xc0 |
| #define SSD20XD_TTL_OFFSET_TTL17 0xc4 |
| #define SSD20XD_TTL_OFFSET_TTL18 0xc8 |
| #define SSD20XD_TTL_OFFSET_TTL19 0xcc |
| #define SSD20XD_TTL_OFFSET_TTL20 0xd0 |
| #define SSD20XD_TTL_OFFSET_TTL21 0xd4 |
| #define SSD20XD_TTL_OFFSET_TTL22 0xd8 |
| #define SSD20XD_TTL_OFFSET_TTL23 0xdc |
| #define SSD20XD_TTL_OFFSET_TTL24 0xe0 |
| #define SSD20XD_TTL_OFFSET_TTL25 0xe4 |
| #define SSD20XD_TTL_OFFSET_TTL26 0xe8 |
| #define SSD20XD_TTL_OFFSET_TTL27 0xec |
| |
| #define SSD20XD_TTL_OFFSETS SSD20XD_TTL_OFFSET_TTL0, \ |
| SSD20XD_TTL_OFFSET_TTL1, \ |
| SSD20XD_TTL_OFFSET_TTL2, \ |
| SSD20XD_TTL_OFFSET_TTL3, \ |
| SSD20XD_TTL_OFFSET_TTL4, \ |
| SSD20XD_TTL_OFFSET_TTL5, \ |
| SSD20XD_TTL_OFFSET_TTL6, \ |
| SSD20XD_TTL_OFFSET_TTL7, \ |
| SSD20XD_TTL_OFFSET_TTL8, \ |
| SSD20XD_TTL_OFFSET_TTL9, \ |
| SSD20XD_TTL_OFFSET_TTL10, \ |
| SSD20XD_TTL_OFFSET_TTL11, \ |
| SSD20XD_TTL_OFFSET_TTL12, \ |
| SSD20XD_TTL_OFFSET_TTL13, \ |
| SSD20XD_TTL_OFFSET_TTL14, \ |
| SSD20XD_TTL_OFFSET_TTL15, \ |
| SSD20XD_TTL_OFFSET_TTL16, \ |
| SSD20XD_TTL_OFFSET_TTL17, \ |
| SSD20XD_TTL_OFFSET_TTL18, \ |
| SSD20XD_TTL_OFFSET_TTL19, \ |
| SSD20XD_TTL_OFFSET_TTL20, \ |
| SSD20XD_TTL_OFFSET_TTL21, \ |
| SSD20XD_TTL_OFFSET_TTL22, \ |
| SSD20XD_TTL_OFFSET_TTL23, \ |
| SSD20XD_TTL_OFFSET_TTL24, \ |
| SSD20XD_TTL_OFFSET_TTL25, \ |
| SSD20XD_TTL_OFFSET_TTL26, \ |
| SSD20XD_TTL_OFFSET_TTL27 |
| |
| /* On the ssd20xd the two normal uarts have dedicated pins */ |
| #define SSD20XD_PINNAME_UART0_RX "uart0_rx" |
| #define SSD20XD_PINNAME_UART0_TX "uart0_tx" |
| |
| #define SSD20XD_UART0_NAMES \ |
| SSD20XD_PINNAME_UART0_RX, \ |
| SSD20XD_PINNAME_UART0_TX |
| |
| #define SSD20XD_PINNAME_UART1_RX "uart1_rx" |
| #define SSD20XD_PINNAME_UART1_TX "uart1_tx" |
| |
| #define SSD20XD_UART1_NAMES \ |
| SSD20XD_PINNAME_UART1_RX, \ |
| SSD20XD_PINNAME_UART1_TX |
| |
| #define SSD20XD_OFF_UART0_RX 0x60 |
| #define SSD20XD_OFF_UART0_TX 0x64 |
| |
| #define SSD20XD_UART0_OFFSETS \ |
| SSD20XD_OFF_UART0_RX, \ |
| SSD20XD_OFF_UART0_TX |
| |
| #define SSD20XD_OFF_UART1_RX 0x68 |
| #define SSD20XD_OFF_UART1_TX 0x6c |
| |
| #define SSD20XD_UART1_OFFSETS \ |
| SSD20XD_OFF_UART1_RX, \ |
| SSD20XD_OFF_UART1_TX |
| |
| /* |
| * ssd20x has the same pin names but different ordering |
| * of the registers that control the gpio. |
| */ |
| #define SSD20XD_OFF_SD_D0 0x140 |
| #define SSD20XD_OFF_SD_D1 0x144 |
| #define SSD20XD_OFF_SD_D2 0x148 |
| #define SSD20XD_OFF_SD_D3 0x14c |
| #define SSD20XD_OFF_SD_CMD 0x150 |
| #define SSD20XD_OFF_SD_CLK 0x154 |
| |
| #define SSD20XD_SD_OFFSETS SSD20XD_OFF_SD_CLK, \ |
| SSD20XD_OFF_SD_CMD, \ |
| SSD20XD_OFF_SD_D0, \ |
| SSD20XD_OFF_SD_D1, \ |
| SSD20XD_OFF_SD_D2, \ |
| SSD20XD_OFF_SD_D3 |
| |
| static const char * const ssd20xd_names[] = { |
| FUART_NAMES, |
| SD_NAMES, |
| SSD20XD_UART0_NAMES, |
| SSD20XD_UART1_NAMES, |
| SSD20XD_TTL_PINNAMES, |
| SSD20XD_GPIO_NAMES, |
| }; |
| |
| static const unsigned int ssd20xd_offsets[] = { |
| FUART_OFFSETS, |
| SSD20XD_SD_OFFSETS, |
| SSD20XD_UART0_OFFSETS, |
| SSD20XD_UART1_OFFSETS, |
| SSD20XD_TTL_OFFSETS, |
| SSD20XD_GPIO_OFFSETS, |
| }; |
| |
| MSC313_GPIO_CHIPDATA(ssd20xd); |
| #endif |
| |
| struct msc313_gpio { |
| void __iomem *base; |
| const struct msc313_gpio_data *gpio_data; |
| u8 *saved; |
| }; |
| |
| static void msc313_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) |
| { |
| struct msc313_gpio *gpio = gpiochip_get_data(chip); |
| u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]); |
| |
| if (value) |
| gpioreg |= MSC313_GPIO_OUT; |
| else |
| gpioreg &= ~MSC313_GPIO_OUT; |
| |
| writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]); |
| } |
| |
| static int msc313_gpio_get(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct msc313_gpio *gpio = gpiochip_get_data(chip); |
| |
| return readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]) & MSC313_GPIO_IN; |
| } |
| |
| static int msc313_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct msc313_gpio *gpio = gpiochip_get_data(chip); |
| u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]); |
| |
| gpioreg |= MSC313_GPIO_OEN; |
| writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]); |
| |
| return 0; |
| } |
| |
| static int msc313_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value) |
| { |
| struct msc313_gpio *gpio = gpiochip_get_data(chip); |
| u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]); |
| |
| gpioreg &= ~MSC313_GPIO_OEN; |
| if (value) |
| gpioreg |= MSC313_GPIO_OUT; |
| else |
| gpioreg &= ~MSC313_GPIO_OUT; |
| writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]); |
| |
| return 0; |
| } |
| |
| /* |
| * The interrupt handling happens in the parent interrupt controller, |
| * we don't do anything here. |
| */ |
| static struct irq_chip msc313_gpio_irqchip = { |
| .name = "GPIO", |
| .irq_eoi = irq_chip_eoi_parent, |
| .irq_mask = irq_chip_mask_parent, |
| .irq_unmask = irq_chip_unmask_parent, |
| .irq_set_type = irq_chip_set_type_parent, |
| .irq_set_affinity = irq_chip_set_affinity_parent, |
| }; |
| |
| /* |
| * The parent interrupt controller needs the GIC interrupt type set to GIC_SPI |
| * so we need to provide the fwspec. Essentially gpiochip_populate_parent_fwspec_twocell |
| * that puts GIC_SPI into the first cell. |
| */ |
| static int msc313_gpio_populate_parent_fwspec(struct gpio_chip *gc, |
| union gpio_irq_fwspec *gfwspec, |
| unsigned int parent_hwirq, |
| unsigned int parent_type) |
| { |
| struct irq_fwspec *fwspec = &gfwspec->fwspec; |
| |
| fwspec->fwnode = gc->irq.parent_domain->fwnode; |
| fwspec->param_count = 3; |
| fwspec->param[0] = GIC_SPI; |
| fwspec->param[1] = parent_hwirq; |
| fwspec->param[2] = parent_type; |
| |
| return 0; |
| } |
| |
| static int msc313e_gpio_child_to_parent_hwirq(struct gpio_chip *chip, |
| unsigned int child, |
| unsigned int child_type, |
| unsigned int *parent, |
| unsigned int *parent_type) |
| { |
| struct msc313_gpio *priv = gpiochip_get_data(chip); |
| unsigned int offset = priv->gpio_data->offsets[child]; |
| |
| /* |
| * only the spi0 pins have interrupts on the parent |
| * on all of the known chips and so far they are all |
| * mapped to the same place |
| */ |
| if (offset >= OFF_SPI0_CZ && offset <= OFF_SPI0_DO) { |
| *parent_type = child_type; |
| *parent = ((offset - OFF_SPI0_CZ) >> 2) + 28; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int msc313_gpio_probe(struct platform_device *pdev) |
| { |
| const struct msc313_gpio_data *match_data; |
| struct msc313_gpio *gpio; |
| struct gpio_chip *gpiochip; |
| struct gpio_irq_chip *gpioirqchip; |
| struct irq_domain *parent_domain; |
| struct device_node *parent_node; |
| struct device *dev = &pdev->dev; |
| |
| match_data = of_device_get_match_data(dev); |
| if (!match_data) |
| return -EINVAL; |
| |
| parent_node = of_irq_find_parent(dev->of_node); |
| if (!parent_node) |
| return -ENODEV; |
| |
| parent_domain = irq_find_host(parent_node); |
| if (!parent_domain) |
| return -ENODEV; |
| |
| gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL); |
| if (!gpio) |
| return -ENOMEM; |
| |
| gpio->gpio_data = match_data; |
| |
| gpio->saved = devm_kcalloc(dev, gpio->gpio_data->num, sizeof(*gpio->saved), GFP_KERNEL); |
| if (!gpio->saved) |
| return -ENOMEM; |
| |
| gpio->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(gpio->base)) |
| return PTR_ERR(gpio->base); |
| |
| platform_set_drvdata(pdev, gpio); |
| |
| gpiochip = devm_kzalloc(dev, sizeof(*gpiochip), GFP_KERNEL); |
| if (!gpiochip) |
| return -ENOMEM; |
| |
| gpiochip->label = DRIVER_NAME; |
| gpiochip->parent = dev; |
| gpiochip->request = gpiochip_generic_request; |
| gpiochip->free = gpiochip_generic_free; |
| gpiochip->direction_input = msc313_gpio_direction_input; |
| gpiochip->direction_output = msc313_gpio_direction_output; |
| gpiochip->get = msc313_gpio_get; |
| gpiochip->set = msc313_gpio_set; |
| gpiochip->base = -1; |
| gpiochip->ngpio = gpio->gpio_data->num; |
| gpiochip->names = gpio->gpio_data->names; |
| |
| gpioirqchip = &gpiochip->irq; |
| gpioirqchip->chip = &msc313_gpio_irqchip; |
| gpioirqchip->fwnode = of_node_to_fwnode(dev->of_node); |
| gpioirqchip->parent_domain = parent_domain; |
| gpioirqchip->child_to_parent_hwirq = msc313e_gpio_child_to_parent_hwirq; |
| gpioirqchip->populate_parent_alloc_arg = msc313_gpio_populate_parent_fwspec; |
| gpioirqchip->handler = handle_bad_irq; |
| gpioirqchip->default_type = IRQ_TYPE_NONE; |
| |
| return devm_gpiochip_add_data(dev, gpiochip, gpio); |
| } |
| |
| static const struct of_device_id msc313_gpio_of_match[] = { |
| #ifdef CONFIG_MACH_INFINITY |
| { |
| .compatible = "mstar,msc313-gpio", |
| .data = &msc313_data, |
| }, |
| { |
| .compatible = "sstar,ssd20xd-gpio", |
| .data = &ssd20xd_data, |
| }, |
| #endif |
| { } |
| }; |
| |
| /* |
| * The GPIO controller loses the state of the registers when the |
| * SoC goes into suspend to memory mode so we need to save some |
| * of the register bits before suspending and put it back when resuming |
| */ |
| static int __maybe_unused msc313_gpio_suspend(struct device *dev) |
| { |
| struct msc313_gpio *gpio = dev_get_drvdata(dev); |
| int i; |
| |
| for (i = 0; i < gpio->gpio_data->num; i++) |
| gpio->saved[i] = readb_relaxed(gpio->base + gpio->gpio_data->offsets[i]) & MSC313_GPIO_BITSTOSAVE; |
| |
| return 0; |
| } |
| |
| static int __maybe_unused msc313_gpio_resume(struct device *dev) |
| { |
| struct msc313_gpio *gpio = dev_get_drvdata(dev); |
| int i; |
| |
| for (i = 0; i < gpio->gpio_data->num; i++) |
| writeb_relaxed(gpio->saved[i], gpio->base + gpio->gpio_data->offsets[i]); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(msc313_gpio_ops, msc313_gpio_suspend, msc313_gpio_resume); |
| |
| static struct platform_driver msc313_gpio_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = msc313_gpio_of_match, |
| .pm = &msc313_gpio_ops, |
| }, |
| .probe = msc313_gpio_probe, |
| }; |
| builtin_platform_driver(msc313_gpio_driver); |