| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2020 InvenSense, Inc. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/property.h> |
| |
| #include "inv_icm42600.h" |
| |
| static int inv_icm42600_i2c_bus_setup(struct inv_icm42600_state *st) |
| { |
| unsigned int mask, val; |
| int ret; |
| |
| /* |
| * setup interface registers |
| * This register write to REG_INTF_CONFIG6 enables a spike filter that |
| * is impacting the line and can prevent the I2C ACK to be seen by the |
| * controller. So we don't test the return value. |
| */ |
| regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6, |
| INV_ICM42600_INTF_CONFIG6_MASK, |
| INV_ICM42600_INTF_CONFIG6_I3C_EN); |
| |
| ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4, |
| INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0); |
| if (ret) |
| return ret; |
| |
| /* set slew rates for I2C and SPI */ |
| mask = INV_ICM42600_DRIVE_CONFIG_I2C_MASK | |
| INV_ICM42600_DRIVE_CONFIG_SPI_MASK; |
| val = INV_ICM42600_DRIVE_CONFIG_I2C(INV_ICM42600_SLEW_RATE_12_36NS) | |
| INV_ICM42600_DRIVE_CONFIG_SPI(INV_ICM42600_SLEW_RATE_12_36NS); |
| ret = regmap_update_bits(st->map, INV_ICM42600_REG_DRIVE_CONFIG, |
| mask, val); |
| if (ret) |
| return ret; |
| |
| /* disable SPI bus */ |
| return regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0, |
| INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK, |
| INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_SPI_DIS); |
| } |
| |
| static int inv_icm42600_probe(struct i2c_client *client) |
| { |
| const void *match; |
| enum inv_icm42600_chip chip; |
| struct regmap *regmap; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) |
| return -ENOTSUPP; |
| |
| match = device_get_match_data(&client->dev); |
| if (!match) |
| return -EINVAL; |
| chip = (uintptr_t)match; |
| |
| regmap = devm_regmap_init_i2c(client, &inv_icm42600_regmap_config); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| return inv_icm42600_core_probe(regmap, chip, client->irq, |
| inv_icm42600_i2c_bus_setup); |
| } |
| |
| static const struct of_device_id inv_icm42600_of_matches[] = { |
| { |
| .compatible = "invensense,icm42600", |
| .data = (void *)INV_CHIP_ICM42600, |
| }, { |
| .compatible = "invensense,icm42602", |
| .data = (void *)INV_CHIP_ICM42602, |
| }, { |
| .compatible = "invensense,icm42605", |
| .data = (void *)INV_CHIP_ICM42605, |
| }, { |
| .compatible = "invensense,icm42622", |
| .data = (void *)INV_CHIP_ICM42622, |
| }, { |
| .compatible = "invensense,icm42631", |
| .data = (void *)INV_CHIP_ICM42631, |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, inv_icm42600_of_matches); |
| |
| static struct i2c_driver inv_icm42600_driver = { |
| .driver = { |
| .name = "inv-icm42600-i2c", |
| .of_match_table = inv_icm42600_of_matches, |
| .pm = pm_ptr(&inv_icm42600_pm_ops), |
| }, |
| .probe_new = inv_icm42600_probe, |
| }; |
| module_i2c_driver(inv_icm42600_driver); |
| |
| MODULE_AUTHOR("InvenSense, Inc."); |
| MODULE_DESCRIPTION("InvenSense ICM-426xx I2C driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(IIO_ICM42600); |