| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * adjd_s311.c - Support for ADJD-S311-CR999 digital color sensor |
| * |
| * Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net> |
| * |
| * driver for ADJD-S311-CR999 digital color sensor (10-bit channels for |
| * red, green, blue, clear); 7-bit I2C slave address 0x74 |
| * |
| * limitations: no calibration, no offset mode, no sleep mode |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/bitmap.h> |
| #include <linux/err.h> |
| #include <linux/irq.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/triggered_buffer.h> |
| |
| #define ADJD_S311_DRV_NAME "adjd_s311" |
| |
| #define ADJD_S311_CTRL 0x00 |
| #define ADJD_S311_CONFIG 0x01 |
| #define ADJD_S311_CAP_RED 0x06 |
| #define ADJD_S311_CAP_GREEN 0x07 |
| #define ADJD_S311_CAP_BLUE 0x08 |
| #define ADJD_S311_CAP_CLEAR 0x09 |
| #define ADJD_S311_INT_RED 0x0a |
| #define ADJD_S311_INT_GREEN 0x0c |
| #define ADJD_S311_INT_BLUE 0x0e |
| #define ADJD_S311_INT_CLEAR 0x10 |
| #define ADJD_S311_DATA_RED 0x40 |
| #define ADJD_S311_DATA_GREEN 0x42 |
| #define ADJD_S311_DATA_BLUE 0x44 |
| #define ADJD_S311_DATA_CLEAR 0x46 |
| #define ADJD_S311_OFFSET_RED 0x48 |
| #define ADJD_S311_OFFSET_GREEN 0x49 |
| #define ADJD_S311_OFFSET_BLUE 0x4a |
| #define ADJD_S311_OFFSET_CLEAR 0x4b |
| |
| #define ADJD_S311_CTRL_GOFS 0x02 |
| #define ADJD_S311_CTRL_GSSR 0x01 |
| #define ADJD_S311_CAP_MASK 0x0f |
| #define ADJD_S311_INT_MASK 0x0fff |
| #define ADJD_S311_DATA_MASK 0x03ff |
| |
| struct adjd_s311_data { |
| struct i2c_client *client; |
| struct { |
| s16 chans[4]; |
| s64 ts __aligned(8); |
| } scan; |
| }; |
| |
| enum adjd_s311_channel_idx { |
| IDX_RED, IDX_GREEN, IDX_BLUE, IDX_CLEAR |
| }; |
| |
| #define ADJD_S311_DATA_REG(chan) (ADJD_S311_DATA_RED + (chan) * 2) |
| #define ADJD_S311_INT_REG(chan) (ADJD_S311_INT_RED + (chan) * 2) |
| #define ADJD_S311_CAP_REG(chan) (ADJD_S311_CAP_RED + (chan)) |
| |
| static int adjd_s311_req_data(struct iio_dev *indio_dev) |
| { |
| struct adjd_s311_data *data = iio_priv(indio_dev); |
| int tries = 10; |
| |
| int ret = i2c_smbus_write_byte_data(data->client, ADJD_S311_CTRL, |
| ADJD_S311_CTRL_GSSR); |
| if (ret < 0) |
| return ret; |
| |
| while (tries--) { |
| ret = i2c_smbus_read_byte_data(data->client, ADJD_S311_CTRL); |
| if (ret < 0) |
| return ret; |
| if (!(ret & ADJD_S311_CTRL_GSSR)) |
| break; |
| msleep(20); |
| } |
| |
| if (tries < 0) { |
| dev_err(&data->client->dev, |
| "adjd_s311_req_data() failed, data not ready\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int adjd_s311_read_data(struct iio_dev *indio_dev, u8 reg, int *val) |
| { |
| struct adjd_s311_data *data = iio_priv(indio_dev); |
| |
| int ret = adjd_s311_req_data(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_read_word_data(data->client, reg); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret & ADJD_S311_DATA_MASK; |
| |
| return 0; |
| } |
| |
| static irqreturn_t adjd_s311_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct adjd_s311_data *data = iio_priv(indio_dev); |
| s64 time_ns = iio_get_time_ns(indio_dev); |
| int i, j = 0; |
| |
| int ret = adjd_s311_req_data(indio_dev); |
| if (ret < 0) |
| goto done; |
| |
| for_each_set_bit(i, indio_dev->active_scan_mask, |
| indio_dev->masklength) { |
| ret = i2c_smbus_read_word_data(data->client, |
| ADJD_S311_DATA_REG(i)); |
| if (ret < 0) |
| goto done; |
| |
| data->scan.chans[j++] = ret & ADJD_S311_DATA_MASK; |
| } |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, time_ns); |
| |
| done: |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #define ADJD_S311_CHANNEL(_color, _scan_idx) { \ |
| .type = IIO_INTENSITY, \ |
| .modified = 1, \ |
| .address = (IDX_##_color), \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \ |
| BIT(IIO_CHAN_INFO_INT_TIME), \ |
| .channel2 = (IIO_MOD_LIGHT_##_color), \ |
| .scan_index = (_scan_idx), \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = 10, \ |
| .storagebits = 16, \ |
| .endianness = IIO_CPU, \ |
| }, \ |
| } |
| |
| static const struct iio_chan_spec adjd_s311_channels[] = { |
| ADJD_S311_CHANNEL(RED, 0), |
| ADJD_S311_CHANNEL(GREEN, 1), |
| ADJD_S311_CHANNEL(BLUE, 2), |
| ADJD_S311_CHANNEL(CLEAR, 3), |
| IIO_CHAN_SOFT_TIMESTAMP(4), |
| }; |
| |
| static int adjd_s311_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct adjd_s311_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = adjd_s311_read_data(indio_dev, |
| ADJD_S311_DATA_REG(chan->address), val); |
| if (ret < 0) |
| return ret; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| ret = i2c_smbus_read_byte_data(data->client, |
| ADJD_S311_CAP_REG(chan->address)); |
| if (ret < 0) |
| return ret; |
| *val = ret & ADJD_S311_CAP_MASK; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_INT_TIME: |
| ret = i2c_smbus_read_word_data(data->client, |
| ADJD_S311_INT_REG(chan->address)); |
| if (ret < 0) |
| return ret; |
| *val = 0; |
| /* |
| * not documented, based on measurement: |
| * 4095 LSBs correspond to roughly 4 ms |
| */ |
| *val2 = ret & ADJD_S311_INT_MASK; |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| return -EINVAL; |
| } |
| |
| static int adjd_s311_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct adjd_s311_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| if (val < 0 || val > ADJD_S311_CAP_MASK) |
| return -EINVAL; |
| |
| return i2c_smbus_write_byte_data(data->client, |
| ADJD_S311_CAP_REG(chan->address), val); |
| case IIO_CHAN_INFO_INT_TIME: |
| if (val != 0 || val2 < 0 || val2 > ADJD_S311_INT_MASK) |
| return -EINVAL; |
| |
| return i2c_smbus_write_word_data(data->client, |
| ADJD_S311_INT_REG(chan->address), val2); |
| } |
| return -EINVAL; |
| } |
| |
| static const struct iio_info adjd_s311_info = { |
| .read_raw = adjd_s311_read_raw, |
| .write_raw = adjd_s311_write_raw, |
| }; |
| |
| static int adjd_s311_probe(struct i2c_client *client) |
| { |
| struct adjd_s311_data *data; |
| struct iio_dev *indio_dev; |
| int err; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (indio_dev == NULL) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| data->client = client; |
| |
| indio_dev->info = &adjd_s311_info; |
| indio_dev->name = ADJD_S311_DRV_NAME; |
| indio_dev->channels = adjd_s311_channels; |
| indio_dev->num_channels = ARRAY_SIZE(adjd_s311_channels); |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| err = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL, |
| adjd_s311_trigger_handler, NULL); |
| if (err < 0) |
| return err; |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static const struct i2c_device_id adjd_s311_id[] = { |
| { "adjd_s311", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, adjd_s311_id); |
| |
| static struct i2c_driver adjd_s311_driver = { |
| .driver = { |
| .name = ADJD_S311_DRV_NAME, |
| }, |
| .probe_new = adjd_s311_probe, |
| .id_table = adjd_s311_id, |
| }; |
| module_i2c_driver(adjd_s311_driver); |
| |
| MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); |
| MODULE_DESCRIPTION("ADJD-S311 color sensor"); |
| MODULE_LICENSE("GPL"); |