| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/drivers/mmc/core/host.c |
| * |
| * Copyright (C) 2003 Russell King, All Rights Reserved. |
| * Copyright (C) 2007-2008 Pierre Ossman |
| * Copyright (C) 2010 Linus Walleij |
| * |
| * MMC host class device management |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/idr.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/pagemap.h> |
| #include <linux/pm_wakeup.h> |
| #include <linux/export.h> |
| #include <linux/leds.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/slot-gpio.h> |
| |
| #include "core.h" |
| #include "crypto.h" |
| #include "host.h" |
| #include "slot-gpio.h" |
| #include "pwrseq.h" |
| #include "sdio_ops.h" |
| |
| #define cls_dev_to_mmc_host(d) container_of(d, struct mmc_host, class_dev) |
| |
| static DEFINE_IDA(mmc_host_ida); |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int mmc_host_class_prepare(struct device *dev) |
| { |
| struct mmc_host *host = cls_dev_to_mmc_host(dev); |
| |
| /* |
| * It's safe to access the bus_ops pointer, as both userspace and the |
| * workqueue for detecting cards are frozen at this point. |
| */ |
| if (!host->bus_ops) |
| return 0; |
| |
| /* Validate conditions for system suspend. */ |
| if (host->bus_ops->pre_suspend) |
| return host->bus_ops->pre_suspend(host); |
| |
| return 0; |
| } |
| |
| static void mmc_host_class_complete(struct device *dev) |
| { |
| struct mmc_host *host = cls_dev_to_mmc_host(dev); |
| |
| _mmc_detect_change(host, 0, false); |
| } |
| |
| static const struct dev_pm_ops mmc_host_class_dev_pm_ops = { |
| .prepare = mmc_host_class_prepare, |
| .complete = mmc_host_class_complete, |
| }; |
| |
| #define MMC_HOST_CLASS_DEV_PM_OPS (&mmc_host_class_dev_pm_ops) |
| #else |
| #define MMC_HOST_CLASS_DEV_PM_OPS NULL |
| #endif |
| |
| static void mmc_host_classdev_release(struct device *dev) |
| { |
| struct mmc_host *host = cls_dev_to_mmc_host(dev); |
| wakeup_source_unregister(host->ws); |
| if (of_alias_get_id(host->parent->of_node, "mmc") < 0) |
| ida_simple_remove(&mmc_host_ida, host->index); |
| kfree(host); |
| } |
| |
| static int mmc_host_classdev_shutdown(struct device *dev) |
| { |
| struct mmc_host *host = cls_dev_to_mmc_host(dev); |
| |
| __mmc_stop_host(host); |
| return 0; |
| } |
| |
| static struct class mmc_host_class = { |
| .name = "mmc_host", |
| .dev_release = mmc_host_classdev_release, |
| .shutdown_pre = mmc_host_classdev_shutdown, |
| .pm = MMC_HOST_CLASS_DEV_PM_OPS, |
| }; |
| |
| int mmc_register_host_class(void) |
| { |
| return class_register(&mmc_host_class); |
| } |
| |
| void mmc_unregister_host_class(void) |
| { |
| class_unregister(&mmc_host_class); |
| } |
| |
| /** |
| * mmc_retune_enable() - enter a transfer mode that requires retuning |
| * @host: host which should retune now |
| */ |
| void mmc_retune_enable(struct mmc_host *host) |
| { |
| host->can_retune = 1; |
| if (host->retune_period) |
| mod_timer(&host->retune_timer, |
| jiffies + host->retune_period * HZ); |
| } |
| |
| /* |
| * Pause re-tuning for a small set of operations. The pause begins after the |
| * next command and after first doing re-tuning. |
| */ |
| void mmc_retune_pause(struct mmc_host *host) |
| { |
| if (!host->retune_paused) { |
| host->retune_paused = 1; |
| mmc_retune_needed(host); |
| mmc_retune_hold(host); |
| } |
| } |
| EXPORT_SYMBOL(mmc_retune_pause); |
| |
| void mmc_retune_unpause(struct mmc_host *host) |
| { |
| if (host->retune_paused) { |
| host->retune_paused = 0; |
| mmc_retune_release(host); |
| } |
| } |
| EXPORT_SYMBOL(mmc_retune_unpause); |
| |
| /** |
| * mmc_retune_disable() - exit a transfer mode that requires retuning |
| * @host: host which should not retune anymore |
| * |
| * It is not meant for temporarily preventing retuning! |
| */ |
| void mmc_retune_disable(struct mmc_host *host) |
| { |
| mmc_retune_unpause(host); |
| host->can_retune = 0; |
| del_timer_sync(&host->retune_timer); |
| mmc_retune_clear(host); |
| } |
| |
| void mmc_retune_timer_stop(struct mmc_host *host) |
| { |
| del_timer_sync(&host->retune_timer); |
| } |
| EXPORT_SYMBOL(mmc_retune_timer_stop); |
| |
| void mmc_retune_hold(struct mmc_host *host) |
| { |
| if (!host->hold_retune) |
| host->retune_now = 1; |
| host->hold_retune += 1; |
| } |
| |
| void mmc_retune_release(struct mmc_host *host) |
| { |
| if (host->hold_retune) |
| host->hold_retune -= 1; |
| else |
| WARN_ON(1); |
| } |
| EXPORT_SYMBOL(mmc_retune_release); |
| |
| int mmc_retune(struct mmc_host *host) |
| { |
| bool return_to_hs400 = false; |
| int err; |
| |
| if (host->retune_now) |
| host->retune_now = 0; |
| else |
| return 0; |
| |
| if (!host->need_retune || host->doing_retune || !host->card) |
| return 0; |
| |
| host->need_retune = 0; |
| |
| host->doing_retune = 1; |
| |
| if (host->ios.timing == MMC_TIMING_MMC_HS400) { |
| err = mmc_hs400_to_hs200(host->card); |
| if (err) |
| goto out; |
| |
| return_to_hs400 = true; |
| } |
| |
| err = mmc_execute_tuning(host->card); |
| if (err) |
| goto out; |
| |
| if (return_to_hs400) |
| err = mmc_hs200_to_hs400(host->card); |
| out: |
| host->doing_retune = 0; |
| |
| return err; |
| } |
| |
| static void mmc_retune_timer(struct timer_list *t) |
| { |
| struct mmc_host *host = from_timer(host, t, retune_timer); |
| |
| mmc_retune_needed(host); |
| } |
| |
| static void mmc_of_parse_timing_phase(struct device *dev, const char *prop, |
| struct mmc_clk_phase *phase) |
| { |
| int degrees[2] = {0}; |
| int rc; |
| |
| rc = device_property_read_u32_array(dev, prop, degrees, 2); |
| phase->valid = !rc; |
| if (phase->valid) { |
| phase->in_deg = degrees[0]; |
| phase->out_deg = degrees[1]; |
| } |
| } |
| |
| void |
| mmc_of_parse_clk_phase(struct mmc_host *host, struct mmc_clk_phase_map *map) |
| { |
| struct device *dev = host->parent; |
| |
| mmc_of_parse_timing_phase(dev, "clk-phase-legacy", |
| &map->phase[MMC_TIMING_LEGACY]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs", |
| &map->phase[MMC_TIMING_MMC_HS]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-sd-hs", |
| &map->phase[MMC_TIMING_SD_HS]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr12", |
| &map->phase[MMC_TIMING_UHS_SDR12]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr25", |
| &map->phase[MMC_TIMING_UHS_SDR25]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr50", |
| &map->phase[MMC_TIMING_UHS_SDR50]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr104", |
| &map->phase[MMC_TIMING_UHS_SDR104]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-uhs-ddr50", |
| &map->phase[MMC_TIMING_UHS_DDR50]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-mmc-ddr52", |
| &map->phase[MMC_TIMING_MMC_DDR52]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs200", |
| &map->phase[MMC_TIMING_MMC_HS200]); |
| mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs400", |
| &map->phase[MMC_TIMING_MMC_HS400]); |
| } |
| EXPORT_SYMBOL(mmc_of_parse_clk_phase); |
| |
| /** |
| * mmc_of_parse() - parse host's device properties |
| * @host: host whose properties should be parsed. |
| * |
| * To keep the rest of the MMC subsystem unaware of whether DT has been |
| * used to instantiate and configure this host instance or not, we |
| * parse the properties and set respective generic mmc-host flags and |
| * parameters. |
| */ |
| int mmc_of_parse(struct mmc_host *host) |
| { |
| struct device *dev = host->parent; |
| u32 bus_width, drv_type, cd_debounce_delay_ms; |
| int ret; |
| |
| if (!dev || !dev_fwnode(dev)) |
| return 0; |
| |
| /* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */ |
| if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) { |
| dev_dbg(host->parent, |
| "\"bus-width\" property is missing, assuming 1 bit.\n"); |
| bus_width = 1; |
| } |
| |
| switch (bus_width) { |
| case 8: |
| host->caps |= MMC_CAP_8_BIT_DATA; |
| fallthrough; /* Hosts capable of 8-bit can also do 4 bits */ |
| case 4: |
| host->caps |= MMC_CAP_4_BIT_DATA; |
| break; |
| case 1: |
| break; |
| default: |
| dev_err(host->parent, |
| "Invalid \"bus-width\" value %u!\n", bus_width); |
| return -EINVAL; |
| } |
| |
| /* f_max is obtained from the optional "max-frequency" property */ |
| device_property_read_u32(dev, "max-frequency", &host->f_max); |
| |
| /* |
| * Configure CD and WP pins. They are both by default active low to |
| * match the SDHCI spec. If GPIOs are provided for CD and / or WP, the |
| * mmc-gpio helpers are used to attach, configure and use them. If |
| * polarity inversion is specified in DT, one of MMC_CAP2_CD_ACTIVE_HIGH |
| * and MMC_CAP2_RO_ACTIVE_HIGH capability-2 flags is set. If the |
| * "broken-cd" property is provided, the MMC_CAP_NEEDS_POLL capability |
| * is set. If the "non-removable" property is found, the |
| * MMC_CAP_NONREMOVABLE capability is set and no card-detection |
| * configuration is performed. |
| */ |
| |
| /* Parse Card Detection */ |
| |
| if (device_property_read_bool(dev, "non-removable")) { |
| host->caps |= MMC_CAP_NONREMOVABLE; |
| } else { |
| if (device_property_read_bool(dev, "cd-inverted")) |
| host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; |
| |
| if (device_property_read_u32(dev, "cd-debounce-delay-ms", |
| &cd_debounce_delay_ms)) |
| cd_debounce_delay_ms = 200; |
| |
| if (device_property_read_bool(dev, "broken-cd")) |
| host->caps |= MMC_CAP_NEEDS_POLL; |
| |
| ret = mmc_gpiod_request_cd(host, "cd", 0, false, |
| cd_debounce_delay_ms * 1000); |
| if (!ret) |
| dev_info(host->parent, "Got CD GPIO\n"); |
| else if (ret != -ENOENT && ret != -ENOSYS) |
| return ret; |
| } |
| |
| /* Parse Write Protection */ |
| |
| if (device_property_read_bool(dev, "wp-inverted")) |
| host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; |
| |
| ret = mmc_gpiod_request_ro(host, "wp", 0, 0); |
| if (!ret) |
| dev_info(host->parent, "Got WP GPIO\n"); |
| else if (ret != -ENOENT && ret != -ENOSYS) |
| return ret; |
| |
| if (device_property_read_bool(dev, "disable-wp")) |
| host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; |
| |
| if (device_property_read_bool(dev, "cap-sd-highspeed")) |
| host->caps |= MMC_CAP_SD_HIGHSPEED; |
| if (device_property_read_bool(dev, "cap-mmc-highspeed")) |
| host->caps |= MMC_CAP_MMC_HIGHSPEED; |
| if (device_property_read_bool(dev, "sd-uhs-sdr12")) |
| host->caps |= MMC_CAP_UHS_SDR12; |
| if (device_property_read_bool(dev, "sd-uhs-sdr25")) |
| host->caps |= MMC_CAP_UHS_SDR25; |
| if (device_property_read_bool(dev, "sd-uhs-sdr50")) |
| host->caps |= MMC_CAP_UHS_SDR50; |
| if (device_property_read_bool(dev, "sd-uhs-sdr104")) |
| host->caps |= MMC_CAP_UHS_SDR104; |
| if (device_property_read_bool(dev, "sd-uhs-ddr50")) |
| host->caps |= MMC_CAP_UHS_DDR50; |
| if (device_property_read_bool(dev, "cap-power-off-card")) |
| host->caps |= MMC_CAP_POWER_OFF_CARD; |
| if (device_property_read_bool(dev, "cap-mmc-hw-reset")) |
| host->caps |= MMC_CAP_HW_RESET; |
| if (device_property_read_bool(dev, "cap-sdio-irq")) |
| host->caps |= MMC_CAP_SDIO_IRQ; |
| if (device_property_read_bool(dev, "full-pwr-cycle")) |
| host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE; |
| if (device_property_read_bool(dev, "full-pwr-cycle-in-suspend")) |
| host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND; |
| if (device_property_read_bool(dev, "keep-power-in-suspend")) |
| host->pm_caps |= MMC_PM_KEEP_POWER; |
| if (device_property_read_bool(dev, "wakeup-source") || |
| device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */ |
| host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; |
| if (device_property_read_bool(dev, "mmc-ddr-3_3v")) |
| host->caps |= MMC_CAP_3_3V_DDR; |
| if (device_property_read_bool(dev, "mmc-ddr-1_8v")) |
| host->caps |= MMC_CAP_1_8V_DDR; |
| if (device_property_read_bool(dev, "mmc-ddr-1_2v")) |
| host->caps |= MMC_CAP_1_2V_DDR; |
| if (device_property_read_bool(dev, "mmc-hs200-1_8v")) |
| host->caps2 |= MMC_CAP2_HS200_1_8V_SDR; |
| if (device_property_read_bool(dev, "mmc-hs200-1_2v")) |
| host->caps2 |= MMC_CAP2_HS200_1_2V_SDR; |
| if (device_property_read_bool(dev, "mmc-hs400-1_8v")) |
| host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; |
| if (device_property_read_bool(dev, "mmc-hs400-1_2v")) |
| host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; |
| if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe")) |
| host->caps2 |= MMC_CAP2_HS400_ES; |
| if (device_property_read_bool(dev, "no-sdio")) |
| host->caps2 |= MMC_CAP2_NO_SDIO; |
| if (device_property_read_bool(dev, "no-sd")) |
| host->caps2 |= MMC_CAP2_NO_SD; |
| if (device_property_read_bool(dev, "no-mmc")) |
| host->caps2 |= MMC_CAP2_NO_MMC; |
| if (device_property_read_bool(dev, "no-mmc-hs400")) |
| host->caps2 &= ~(MMC_CAP2_HS400_1_8V | MMC_CAP2_HS400_1_2V | |
| MMC_CAP2_HS400_ES); |
| |
| /* Must be after "non-removable" check */ |
| if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) { |
| if (host->caps & MMC_CAP_NONREMOVABLE) |
| host->fixed_drv_type = drv_type; |
| else |
| dev_err(host->parent, |
| "can't use fixed driver type, media is removable\n"); |
| } |
| |
| host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr); |
| if (host->dsr_req && (host->dsr & ~0xffff)) { |
| dev_err(host->parent, |
| "device tree specified broken value for DSR: 0x%x, ignoring\n", |
| host->dsr); |
| host->dsr_req = 0; |
| } |
| |
| device_property_read_u32(dev, "post-power-on-delay-ms", |
| &host->ios.power_delay_ms); |
| |
| return mmc_pwrseq_alloc(host); |
| } |
| |
| EXPORT_SYMBOL(mmc_of_parse); |
| |
| /** |
| * mmc_of_parse_voltage - return mask of supported voltages |
| * @host: host whose properties should be parsed. |
| * @mask: mask of voltages available for MMC/SD/SDIO |
| * |
| * Parse the "voltage-ranges" property, returning zero if it is not |
| * found, negative errno if the voltage-range specification is invalid, |
| * or one if the voltage-range is specified and successfully parsed. |
| */ |
| int mmc_of_parse_voltage(struct mmc_host *host, u32 *mask) |
| { |
| const char *prop = "voltage-ranges"; |
| struct device *dev = host->parent; |
| u32 *voltage_ranges; |
| int num_ranges, i; |
| int ret; |
| |
| if (!device_property_present(dev, prop)) { |
| dev_dbg(dev, "%s unspecified\n", prop); |
| return 0; |
| } |
| |
| ret = device_property_count_u32(dev, prop); |
| if (ret < 0) |
| return ret; |
| |
| num_ranges = ret / 2; |
| if (!num_ranges) { |
| dev_err(dev, "%s empty\n", prop); |
| return -EINVAL; |
| } |
| |
| voltage_ranges = kcalloc(2 * num_ranges, sizeof(*voltage_ranges), GFP_KERNEL); |
| if (!voltage_ranges) |
| return -ENOMEM; |
| |
| ret = device_property_read_u32_array(dev, prop, voltage_ranges, 2 * num_ranges); |
| if (ret) { |
| kfree(voltage_ranges); |
| return ret; |
| } |
| |
| for (i = 0; i < num_ranges; i++) { |
| const int j = i * 2; |
| u32 ocr_mask; |
| |
| ocr_mask = mmc_vddrange_to_ocrmask(voltage_ranges[j + 0], |
| voltage_ranges[j + 1]); |
| if (!ocr_mask) { |
| dev_err(dev, "range #%d in %s is invalid\n", i, prop); |
| kfree(voltage_ranges); |
| return -EINVAL; |
| } |
| *mask |= ocr_mask; |
| } |
| |
| kfree(voltage_ranges); |
| |
| return 1; |
| } |
| EXPORT_SYMBOL(mmc_of_parse_voltage); |
| |
| /** |
| * mmc_first_nonreserved_index() - get the first index that is not reserved |
| */ |
| static int mmc_first_nonreserved_index(void) |
| { |
| int max; |
| |
| max = of_alias_get_highest_id("mmc"); |
| if (max < 0) |
| return 0; |
| |
| return max + 1; |
| } |
| |
| /** |
| * mmc_alloc_host - initialise the per-host structure. |
| * @extra: sizeof private data structure |
| * @dev: pointer to host device model structure |
| * |
| * Initialise the per-host structure. |
| */ |
| struct mmc_host *mmc_alloc_host(int extra, struct device *dev) |
| { |
| int index; |
| struct mmc_host *host; |
| int alias_id, min_idx, max_idx; |
| |
| host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL); |
| if (!host) |
| return NULL; |
| |
| /* scanning will be enabled when we're ready */ |
| host->rescan_disable = 1; |
| |
| alias_id = of_alias_get_id(dev->of_node, "mmc"); |
| if (alias_id >= 0) { |
| index = alias_id; |
| } else { |
| min_idx = mmc_first_nonreserved_index(); |
| max_idx = 0; |
| |
| index = ida_simple_get(&mmc_host_ida, min_idx, max_idx, GFP_KERNEL); |
| if (index < 0) { |
| kfree(host); |
| return NULL; |
| } |
| } |
| |
| host->index = index; |
| |
| dev_set_name(&host->class_dev, "mmc%d", host->index); |
| host->ws = wakeup_source_register(NULL, dev_name(&host->class_dev)); |
| |
| host->parent = dev; |
| host->class_dev.parent = dev; |
| host->class_dev.class = &mmc_host_class; |
| device_initialize(&host->class_dev); |
| device_enable_async_suspend(&host->class_dev); |
| |
| if (mmc_gpio_alloc(host)) { |
| put_device(&host->class_dev); |
| return NULL; |
| } |
| |
| spin_lock_init(&host->lock); |
| init_waitqueue_head(&host->wq); |
| INIT_DELAYED_WORK(&host->detect, mmc_rescan); |
| INIT_WORK(&host->sdio_irq_work, sdio_irq_work); |
| timer_setup(&host->retune_timer, mmc_retune_timer, 0); |
| |
| /* |
| * By default, hosts do not support SGIO or large requests. |
| * They have to set these according to their abilities. |
| */ |
| host->max_segs = 1; |
| host->max_seg_size = PAGE_SIZE; |
| |
| host->max_req_size = PAGE_SIZE; |
| host->max_blk_size = 512; |
| host->max_blk_count = PAGE_SIZE / 512; |
| |
| host->fixed_drv_type = -EINVAL; |
| host->ios.power_delay_ms = 10; |
| host->ios.power_mode = MMC_POWER_UNDEFINED; |
| |
| return host; |
| } |
| |
| EXPORT_SYMBOL(mmc_alloc_host); |
| |
| static int mmc_validate_host_caps(struct mmc_host *host) |
| { |
| struct device *dev = host->parent; |
| u32 caps = host->caps, caps2 = host->caps2; |
| |
| if (caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) { |
| dev_warn(dev, "missing ->enable_sdio_irq() ops\n"); |
| return -EINVAL; |
| } |
| |
| if (caps2 & (MMC_CAP2_HS400_ES | MMC_CAP2_HS400) && |
| !(caps & MMC_CAP_8_BIT_DATA) && !(caps2 & MMC_CAP2_NO_MMC)) { |
| dev_warn(dev, "drop HS400 support since no 8-bit bus\n"); |
| host->caps2 = caps2 & ~MMC_CAP2_HS400_ES & ~MMC_CAP2_HS400; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mmc_add_host - initialise host hardware |
| * @host: mmc host |
| * |
| * Register the host with the driver model. The host must be |
| * prepared to start servicing requests before this function |
| * completes. |
| */ |
| int mmc_add_host(struct mmc_host *host) |
| { |
| int err; |
| |
| err = mmc_validate_host_caps(host); |
| if (err) |
| return err; |
| |
| err = device_add(&host->class_dev); |
| if (err) |
| return err; |
| |
| led_trigger_register_simple(dev_name(&host->class_dev), &host->led); |
| |
| mmc_add_host_debugfs(host); |
| |
| mmc_start_host(host); |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(mmc_add_host); |
| |
| /** |
| * mmc_remove_host - remove host hardware |
| * @host: mmc host |
| * |
| * Unregister and remove all cards associated with this host, |
| * and power down the MMC bus. No new requests will be issued |
| * after this function has returned. |
| */ |
| void mmc_remove_host(struct mmc_host *host) |
| { |
| mmc_stop_host(host); |
| |
| mmc_remove_host_debugfs(host); |
| |
| device_del(&host->class_dev); |
| |
| led_trigger_unregister_simple(host->led); |
| } |
| |
| EXPORT_SYMBOL(mmc_remove_host); |
| |
| /** |
| * mmc_free_host - free the host structure |
| * @host: mmc host |
| * |
| * Free the host once all references to it have been dropped. |
| */ |
| void mmc_free_host(struct mmc_host *host) |
| { |
| mmc_pwrseq_free(host); |
| put_device(&host->class_dev); |
| } |
| |
| EXPORT_SYMBOL(mmc_free_host); |