| /* |
| * Copyright 2012 DENX Software Engineering GmbH |
| * Heiko Schocher <hs@denx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| /include/ "skeleton.dtsi" |
| |
| / { |
| arm { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| intc: interrupt-controller { |
| compatible = "ti,cp-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| ti,intc-size = <100>; |
| reg = <0xfffee000 0x2000>; |
| }; |
| }; |
| soc { |
| compatible = "simple-bus"; |
| model = "da850"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x01c00000 0x400000>; |
| interrupt-parent = <&intc>; |
| |
| pmx_core: pinmux@1c14120 { |
| compatible = "pinctrl-single"; |
| reg = <0x14120 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-single,bit-per-mux; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0xffffffff>; |
| status = "disabled"; |
| |
| nand_cs3_pins: pinmux_nand_pins { |
| pinctrl-single,bits = < |
| /* EMA_OE, EMA_WE */ |
| 0x1c 0x00110000 0x00ff0000 |
| /* EMA_CS[4],EMA_CS[3]*/ |
| 0x1c 0x00000110 0x00000ff0 |
| /* |
| * EMA_D[0], EMA_D[1], EMA_D[2], |
| * EMA_D[3], EMA_D[4], EMA_D[5], |
| * EMA_D[6], EMA_D[7] |
| */ |
| 0x24 0x11111111 0xffffffff |
| /* EMA_A[1], EMA_A[2] */ |
| 0x30 0x01100000 0x0ff00000 |
| >; |
| }; |
| i2c0_pins: pinmux_i2c0_pins { |
| pinctrl-single,bits = < |
| /* I2C0_SDA,I2C0_SCL */ |
| 0x10 0x00002200 0x0000ff00 |
| >; |
| }; |
| }; |
| serial0: serial@1c42000 { |
| compatible = "ns16550a"; |
| reg = <0x42000 0x100>; |
| clock-frequency = <150000000>; |
| reg-shift = <2>; |
| interrupts = <25>; |
| status = "disabled"; |
| }; |
| serial1: serial@1d0c000 { |
| compatible = "ns16550a"; |
| reg = <0x10c000 0x100>; |
| clock-frequency = <150000000>; |
| reg-shift = <2>; |
| interrupts = <53>; |
| status = "disabled"; |
| }; |
| serial2: serial@1d0d000 { |
| compatible = "ns16550a"; |
| reg = <0x10d000 0x100>; |
| clock-frequency = <150000000>; |
| reg-shift = <2>; |
| interrupts = <61>; |
| status = "disabled"; |
| }; |
| rtc0: rtc@1c23000 { |
| compatible = "ti,da830-rtc"; |
| reg = <0x23000 0x1000>; |
| interrupts = <19 |
| 19>; |
| status = "disabled"; |
| }; |
| i2c0: i2c@1c22000 { |
| compatible = "ti,davinci-i2c"; |
| reg = <0x22000 0x1000>; |
| interrupts = <15>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| wdt: wdt@1c21000 { |
| compatible = "ti,davinci-wdt"; |
| reg = <0x21000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| nand_cs3@62000000 { |
| compatible = "ti,davinci-nand"; |
| reg = <0x62000000 0x807ff |
| 0x68000000 0x8000>; |
| ti,davinci-chipselect = <1>; |
| ti,davinci-mask-ale = <0>; |
| ti,davinci-mask-cle = <0>; |
| ti,davinci-mask-chipsel = <0>; |
| ti,davinci-ecc-mode = "hw"; |
| ti,davinci-ecc-bits = <4>; |
| ti,davinci-nand-use-bbt; |
| status = "disabled"; |
| }; |
| }; |