| /* |
| * Copyright IBM Corp. 2012 |
| * |
| * Author(s): |
| * Jan Glauber <jang@linux.vnet.ibm.com> |
| */ |
| |
| #define COMPONENT "zPCI" |
| #define pr_fmt(fmt) COMPONENT ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <asm/pci_clp.h> |
| |
| /* |
| * Call Logical Processor |
| * Retry logic is handled by the caller. |
| */ |
| static inline u8 clp_instr(void *data) |
| { |
| struct { u8 _[CLP_BLK_SIZE]; } *req = data; |
| u64 ignored; |
| u8 cc; |
| |
| asm volatile ( |
| " .insn rrf,0xb9a00000,%[ign],%[req],0x0,0x2\n" |
| " ipm %[cc]\n" |
| " srl %[cc],28\n" |
| : [cc] "=d" (cc), [ign] "=d" (ignored), "+m" (*req) |
| : [req] "a" (req) |
| : "cc"); |
| return cc; |
| } |
| |
| static void *clp_alloc_block(void) |
| { |
| return (void *) __get_free_pages(GFP_KERNEL, get_order(CLP_BLK_SIZE)); |
| } |
| |
| static void clp_free_block(void *ptr) |
| { |
| free_pages((unsigned long) ptr, get_order(CLP_BLK_SIZE)); |
| } |
| |
| static void clp_store_query_pci_fngrp(struct zpci_dev *zdev, |
| struct clp_rsp_query_pci_grp *response) |
| { |
| zdev->tlb_refresh = response->refresh; |
| zdev->dma_mask = response->dasm; |
| zdev->msi_addr = response->msia; |
| zdev->fmb_update = response->mui; |
| |
| pr_debug("Supported number of MSI vectors: %u\n", response->noi); |
| switch (response->version) { |
| case 1: |
| zdev->max_bus_speed = PCIE_SPEED_5_0GT; |
| break; |
| default: |
| zdev->max_bus_speed = PCI_SPEED_UNKNOWN; |
| break; |
| } |
| } |
| |
| static int clp_query_pci_fngrp(struct zpci_dev *zdev, u8 pfgid) |
| { |
| struct clp_req_rsp_query_pci_grp *rrb; |
| int rc; |
| |
| rrb = clp_alloc_block(); |
| if (!rrb) |
| return -ENOMEM; |
| |
| memset(rrb, 0, sizeof(*rrb)); |
| rrb->request.hdr.len = sizeof(rrb->request); |
| rrb->request.hdr.cmd = CLP_QUERY_PCI_FNGRP; |
| rrb->response.hdr.len = sizeof(rrb->response); |
| rrb->request.pfgid = pfgid; |
| |
| rc = clp_instr(rrb); |
| if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) |
| clp_store_query_pci_fngrp(zdev, &rrb->response); |
| else { |
| pr_err("Query PCI FNGRP failed with response: %x cc: %d\n", |
| rrb->response.hdr.rsp, rc); |
| rc = -EIO; |
| } |
| clp_free_block(rrb); |
| return rc; |
| } |
| |
| static int clp_store_query_pci_fn(struct zpci_dev *zdev, |
| struct clp_rsp_query_pci *response) |
| { |
| int i; |
| |
| for (i = 0; i < PCI_BAR_COUNT; i++) { |
| zdev->bars[i].val = le32_to_cpu(response->bar[i]); |
| zdev->bars[i].size = response->bar_size[i]; |
| } |
| zdev->start_dma = response->sdma; |
| zdev->end_dma = response->edma; |
| zdev->pchid = response->pchid; |
| zdev->pfgid = response->pfgid; |
| return 0; |
| } |
| |
| static int clp_query_pci_fn(struct zpci_dev *zdev, u32 fh) |
| { |
| struct clp_req_rsp_query_pci *rrb; |
| int rc; |
| |
| rrb = clp_alloc_block(); |
| if (!rrb) |
| return -ENOMEM; |
| |
| memset(rrb, 0, sizeof(*rrb)); |
| rrb->request.hdr.len = sizeof(rrb->request); |
| rrb->request.hdr.cmd = CLP_QUERY_PCI_FN; |
| rrb->response.hdr.len = sizeof(rrb->response); |
| rrb->request.fh = fh; |
| |
| rc = clp_instr(rrb); |
| if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) { |
| rc = clp_store_query_pci_fn(zdev, &rrb->response); |
| if (rc) |
| goto out; |
| if (rrb->response.pfgid) |
| rc = clp_query_pci_fngrp(zdev, rrb->response.pfgid); |
| } else { |
| pr_err("Query PCI failed with response: %x cc: %d\n", |
| rrb->response.hdr.rsp, rc); |
| rc = -EIO; |
| } |
| out: |
| clp_free_block(rrb); |
| return rc; |
| } |
| |
| int clp_add_pci_device(u32 fid, u32 fh, int configured) |
| { |
| struct zpci_dev *zdev; |
| int rc; |
| |
| zdev = zpci_alloc_device(); |
| if (IS_ERR(zdev)) |
| return PTR_ERR(zdev); |
| |
| zdev->fh = fh; |
| zdev->fid = fid; |
| |
| /* Query function properties and update zdev */ |
| rc = clp_query_pci_fn(zdev, fh); |
| if (rc) |
| goto error; |
| |
| if (configured) |
| zdev->state = ZPCI_FN_STATE_CONFIGURED; |
| else |
| zdev->state = ZPCI_FN_STATE_STANDBY; |
| |
| rc = zpci_create_device(zdev); |
| if (rc) |
| goto error; |
| return 0; |
| |
| error: |
| zpci_free_device(zdev); |
| return rc; |
| } |
| |
| /* |
| * Enable/Disable a given PCI function defined by its function handle. |
| */ |
| static int clp_set_pci_fn(u32 *fh, u8 nr_dma_as, u8 command) |
| { |
| struct clp_req_rsp_set_pci *rrb; |
| int rc, retries = 1000; |
| |
| rrb = clp_alloc_block(); |
| if (!rrb) |
| return -ENOMEM; |
| |
| do { |
| memset(rrb, 0, sizeof(*rrb)); |
| rrb->request.hdr.len = sizeof(rrb->request); |
| rrb->request.hdr.cmd = CLP_SET_PCI_FN; |
| rrb->response.hdr.len = sizeof(rrb->response); |
| rrb->request.fh = *fh; |
| rrb->request.oc = command; |
| rrb->request.ndas = nr_dma_as; |
| |
| rc = clp_instr(rrb); |
| if (rrb->response.hdr.rsp == CLP_RC_SETPCIFN_BUSY) { |
| retries--; |
| if (retries < 0) |
| break; |
| msleep(1); |
| } |
| } while (rrb->response.hdr.rsp == CLP_RC_SETPCIFN_BUSY); |
| |
| if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) |
| *fh = rrb->response.fh; |
| else { |
| pr_err("Set PCI FN failed with response: %x cc: %d\n", |
| rrb->response.hdr.rsp, rc); |
| rc = -EIO; |
| } |
| clp_free_block(rrb); |
| return rc; |
| } |
| |
| int clp_enable_fh(struct zpci_dev *zdev, u8 nr_dma_as) |
| { |
| u32 fh = zdev->fh; |
| int rc; |
| |
| rc = clp_set_pci_fn(&fh, nr_dma_as, CLP_SET_ENABLE_PCI_FN); |
| if (!rc) |
| /* Success -> store enabled handle in zdev */ |
| zdev->fh = fh; |
| return rc; |
| } |
| |
| int clp_disable_fh(struct zpci_dev *zdev) |
| { |
| u32 fh = zdev->fh; |
| int rc; |
| |
| if (!zdev_enabled(zdev)) |
| return 0; |
| |
| dev_info(&zdev->pdev->dev, "disabling fn handle: 0x%x\n", fh); |
| rc = clp_set_pci_fn(&fh, 0, CLP_SET_DISABLE_PCI_FN); |
| if (!rc) |
| /* Success -> store disabled handle in zdev */ |
| zdev->fh = fh; |
| else |
| dev_err(&zdev->pdev->dev, |
| "Failed to disable fn handle: 0x%x\n", fh); |
| return rc; |
| } |
| |
| static void clp_check_pcifn_entry(struct clp_fh_list_entry *entry) |
| { |
| int present, rc; |
| |
| if (!entry->vendor_id) |
| return; |
| |
| /* TODO: be a little bit more scalable */ |
| present = zpci_fid_present(entry->fid); |
| |
| if (present) |
| pr_debug("%s: device %x already present\n", __func__, entry->fid); |
| |
| /* skip already used functions */ |
| if (present && entry->config_state) |
| return; |
| |
| /* aev 306: function moved to stand-by state */ |
| if (present && !entry->config_state) { |
| /* |
| * The handle is already disabled, that means no iota/irq freeing via |
| * the firmware interfaces anymore. Need to free resources manually |
| * (DMA memory, debug, sysfs)... |
| */ |
| zpci_stop_device(get_zdev_by_fid(entry->fid)); |
| return; |
| } |
| |
| rc = clp_add_pci_device(entry->fid, entry->fh, entry->config_state); |
| if (rc) |
| pr_err("Failed to add fid: 0x%x\n", entry->fid); |
| } |
| |
| int clp_find_pci_devices(void) |
| { |
| struct clp_req_rsp_list_pci *rrb; |
| u64 resume_token = 0; |
| int entries, i, rc; |
| |
| rrb = clp_alloc_block(); |
| if (!rrb) |
| return -ENOMEM; |
| |
| do { |
| memset(rrb, 0, sizeof(*rrb)); |
| rrb->request.hdr.len = sizeof(rrb->request); |
| rrb->request.hdr.cmd = CLP_LIST_PCI; |
| /* store as many entries as possible */ |
| rrb->response.hdr.len = CLP_BLK_SIZE - LIST_PCI_HDR_LEN; |
| rrb->request.resume_token = resume_token; |
| |
| /* Get PCI function handle list */ |
| rc = clp_instr(rrb); |
| if (rc || rrb->response.hdr.rsp != CLP_RC_OK) { |
| pr_err("List PCI failed with response: 0x%x cc: %d\n", |
| rrb->response.hdr.rsp, rc); |
| rc = -EIO; |
| goto out; |
| } |
| |
| WARN_ON_ONCE(rrb->response.entry_size != |
| sizeof(struct clp_fh_list_entry)); |
| |
| entries = (rrb->response.hdr.len - LIST_PCI_HDR_LEN) / |
| rrb->response.entry_size; |
| pr_info("Detected number of PCI functions: %u\n", entries); |
| |
| /* Store the returned resume token as input for the next call */ |
| resume_token = rrb->response.resume_token; |
| |
| for (i = 0; i < entries; i++) |
| clp_check_pcifn_entry(&rrb->response.fh_list[i]); |
| } while (resume_token); |
| |
| pr_debug("Maximum number of supported PCI functions: %u\n", |
| rrb->response.max_fn); |
| out: |
| clp_free_block(rrb); |
| return rc; |
| } |