| /* |
| * Kirkwood thermal sensor driver |
| * |
| * Copyright (C) 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/thermal.h> |
| |
| #define KIRKWOOD_THERMAL_VALID_OFFSET 9 |
| #define KIRKWOOD_THERMAL_VALID_MASK 0x1 |
| #define KIRKWOOD_THERMAL_TEMP_OFFSET 10 |
| #define KIRKWOOD_THERMAL_TEMP_MASK 0x1FF |
| |
| /* Kirkwood Thermal Sensor Dev Structure */ |
| struct kirkwood_thermal_priv { |
| void __iomem *sensor; |
| }; |
| |
| static int kirkwood_get_temp(struct thermal_zone_device *thermal, |
| unsigned long *temp) |
| { |
| unsigned long reg; |
| struct kirkwood_thermal_priv *priv = thermal->devdata; |
| |
| reg = readl_relaxed(priv->sensor); |
| |
| /* Valid check */ |
| if (!(reg >> KIRKWOOD_THERMAL_VALID_OFFSET) & |
| KIRKWOOD_THERMAL_VALID_MASK) { |
| dev_err(&thermal->device, |
| "Temperature sensor reading not valid\n"); |
| return -EIO; |
| } |
| |
| /* |
| * Calculate temperature. See Section 8.10.1 of the 88AP510, |
| * datasheet, which has the same sensor. |
| * Documentation/arm/Marvell/README |
| */ |
| reg = (reg >> KIRKWOOD_THERMAL_TEMP_OFFSET) & |
| KIRKWOOD_THERMAL_TEMP_MASK; |
| *temp = ((2281638UL - (7298*reg)) / 10); |
| |
| return 0; |
| } |
| |
| static struct thermal_zone_device_ops ops = { |
| .get_temp = kirkwood_get_temp, |
| }; |
| |
| static const struct of_device_id kirkwood_thermal_id_table[] = { |
| { .compatible = "marvell,kirkwood-thermal" }, |
| {} |
| }; |
| |
| static int kirkwood_thermal_probe(struct platform_device *pdev) |
| { |
| struct thermal_zone_device *thermal = NULL; |
| struct kirkwood_thermal_priv *priv; |
| struct resource *res; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "Failed to get platform resource\n"); |
| return -ENODEV; |
| } |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->sensor = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(priv->sensor)) |
| return PTR_ERR(priv->sensor); |
| |
| thermal = thermal_zone_device_register("kirkwood_thermal", 0, 0, |
| priv, &ops, NULL, 0, 0); |
| if (IS_ERR(thermal)) { |
| dev_err(&pdev->dev, |
| "Failed to register thermal zone device\n"); |
| return PTR_ERR(thermal); |
| } |
| |
| platform_set_drvdata(pdev, thermal); |
| |
| return 0; |
| } |
| |
| static int kirkwood_thermal_exit(struct platform_device *pdev) |
| { |
| struct thermal_zone_device *kirkwood_thermal = |
| platform_get_drvdata(pdev); |
| |
| thermal_zone_device_unregister(kirkwood_thermal); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| MODULE_DEVICE_TABLE(of, kirkwood_thermal_id_table); |
| |
| static struct platform_driver kirkwood_thermal_driver = { |
| .probe = kirkwood_thermal_probe, |
| .remove = kirkwood_thermal_exit, |
| .driver = { |
| .name = "kirkwood_thermal", |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(kirkwood_thermal_id_table), |
| }, |
| }; |
| |
| module_platform_driver(kirkwood_thermal_driver); |
| |
| MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu@nigauri.org>"); |
| MODULE_DESCRIPTION("kirkwood thermal driver"); |
| MODULE_LICENSE("GPL"); |