| /* |
| Auvitek AU8522 QAM/8VSB demodulator driver |
| |
| Copyright (C) 2008 Steven Toth <stoth@hauppauge.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include "dvb_frontend.h" |
| #include "dvb-pll.h" |
| #include "au8522.h" |
| |
| struct au8522_state { |
| |
| struct i2c_adapter* i2c; |
| |
| /* configuration settings */ |
| const struct au8522_config* config; |
| |
| struct dvb_frontend frontend; |
| |
| u32 current_frequency; |
| fe_modulation_t current_modulation; |
| |
| }; |
| |
| static int debug = 0; |
| #define dprintk if (debug) printk |
| |
| /* 16 bit registers, 8 bit values */ |
| static int au8522_writereg(struct au8522_state* state, u16 reg, u8 data) |
| { |
| int ret; |
| u8 buf [] = { reg >> 8, reg & 0xff, data }; |
| |
| struct i2c_msg msg = { .addr = state->config->demod_address, |
| .flags = 0, .buf = buf, .len = 3 }; |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| |
| if (ret != 1) |
| printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, " |
| "ret == %i)\n", __FUNCTION__, reg, data, ret); |
| |
| return (ret != 1) ? -1 : 0; |
| } |
| |
| static u8 au8522_readreg(struct au8522_state* state, u16 reg) |
| { |
| int ret; |
| u8 b0 [] = { reg >> 8, reg & 0xff }; |
| u8 b1 [] = { 0 }; |
| |
| struct i2c_msg msg [] = { |
| { .addr = state->config->demod_address, .flags = 0, |
| .buf = b0, .len = 2 }, |
| { .addr = state->config->demod_address, .flags = I2C_M_RD, |
| .buf = b1, .len = 1 } }; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) |
| printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret); |
| return b1[0]; |
| } |
| |
| static int au8522_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) |
| { |
| struct au8522_state* state = fe->demodulator_priv; |
| |
| dprintk("%s(%d)\n", __FUNCTION__, enable); |
| |
| if (enable) |
| return au8522_writereg(state, 0x106, 1); |
| else |
| return au8522_writereg(state, 0x106, 0); |
| } |
| |
| static int au8522_enable_modulation(struct dvb_frontend* fe, |
| fe_modulation_t m) |
| { |
| struct au8522_state* state = fe->demodulator_priv; |
| |
| dprintk("%s(0x%08x)\n", __FUNCTION__, m); |
| |
| switch(m) { |
| case VSB_8: |
| dprintk("%s() VSB_8\n", __FUNCTION__); |
| |
| //au8522_writereg(state, 0x410b, 0x84); // Serial |
| |
| //au8522_writereg(state, 0x8090, 0x82); |
| au8522_writereg(state, 0x8090, 0x84); |
| au8522_writereg(state, 0x4092, 0x11); |
| au8522_writereg(state, 0x2005, 0x00); |
| au8522_writereg(state, 0x8091, 0x80); |
| |
| au8522_writereg(state, 0x80a3, 0x0c); |
| au8522_writereg(state, 0x80a4, 0xe8); |
| au8522_writereg(state, 0x8081, 0xc4); |
| au8522_writereg(state, 0x80a5, 0x40); |
| au8522_writereg(state, 0x80a7, 0x40); |
| au8522_writereg(state, 0x80a6, 0x67); |
| au8522_writereg(state, 0x8262, 0x20); |
| au8522_writereg(state, 0x821c, 0x30); |
| au8522_writereg(state, 0x80d8, 0x1a); |
| au8522_writereg(state, 0x8227, 0xa0); |
| au8522_writereg(state, 0x8121, 0xff); |
| au8522_writereg(state, 0x80a8, 0xf0); |
| au8522_writereg(state, 0x80a9, 0x05); |
| au8522_writereg(state, 0x80aa, 0x77); |
| au8522_writereg(state, 0x80ab, 0xf0); |
| au8522_writereg(state, 0x80ac, 0x05); |
| au8522_writereg(state, 0x80ad, 0x77); |
| au8522_writereg(state, 0x80ae, 0x41); |
| au8522_writereg(state, 0x80af, 0x66); |
| au8522_writereg(state, 0x821b, 0xcc); |
| au8522_writereg(state, 0x821d, 0x80); |
| au8522_writereg(state, 0x80b5, 0xfb); |
| au8522_writereg(state, 0x80b6, 0x8e); |
| au8522_writereg(state, 0x80b7, 0x39); |
| au8522_writereg(state, 0x80a4, 0xe8); |
| au8522_writereg(state, 0x8231, 0x13); |
| break; |
| case QAM_64: |
| case QAM_256: |
| au8522_writereg(state, 0x80a3, 0x09); |
| au8522_writereg(state, 0x80a4, 0x00); |
| au8522_writereg(state, 0x8081, 0xc4); |
| au8522_writereg(state, 0x80a5, 0x40); |
| au8522_writereg(state, 0x80b5, 0xfb); |
| au8522_writereg(state, 0x80b6, 0x8e); |
| au8522_writereg(state, 0x80b7, 0x39); |
| au8522_writereg(state, 0x80aa, 0x77); |
| au8522_writereg(state, 0x80ad, 0x77); |
| au8522_writereg(state, 0x80a6, 0x67); |
| au8522_writereg(state, 0x8262, 0x20); |
| au8522_writereg(state, 0x821c, 0x30); |
| au8522_writereg(state, 0x80b8, 0x3e); |
| au8522_writereg(state, 0x80b9, 0xf0); |
| au8522_writereg(state, 0x80ba, 0x01); |
| au8522_writereg(state, 0x80bb, 0x18); |
| au8522_writereg(state, 0x80bc, 0x50); |
| au8522_writereg(state, 0x80bd, 0x00); |
| au8522_writereg(state, 0x80be, 0xea); |
| au8522_writereg(state, 0x80bf, 0xef); |
| au8522_writereg(state, 0x80c0, 0xfc); |
| au8522_writereg(state, 0x80c1, 0xbd); |
| au8522_writereg(state, 0x80c2, 0x1f); |
| au8522_writereg(state, 0x80c3, 0xfc); |
| au8522_writereg(state, 0x80c4, 0xdd); |
| au8522_writereg(state, 0x80c5, 0xaf); |
| au8522_writereg(state, 0x80c6, 0x00); |
| au8522_writereg(state, 0x80c7, 0x38); |
| au8522_writereg(state, 0x80c8, 0x30); |
| au8522_writereg(state, 0x80c9, 0x05); |
| au8522_writereg(state, 0x80ca, 0x4a); |
| au8522_writereg(state, 0x80cb, 0xd0); |
| au8522_writereg(state, 0x80cc, 0x01); |
| au8522_writereg(state, 0x80cd, 0xd9); |
| au8522_writereg(state, 0x80ce, 0x6f); |
| au8522_writereg(state, 0x80cf, 0xf9); |
| au8522_writereg(state, 0x80d0, 0x70); |
| au8522_writereg(state, 0x80d1, 0xdf); |
| au8522_writereg(state, 0x80d2, 0xf7); |
| au8522_writereg(state, 0x80d3, 0xc2); |
| au8522_writereg(state, 0x80d4, 0xdf); |
| au8522_writereg(state, 0x80d5, 0x02); |
| au8522_writereg(state, 0x80d6, 0x9a); |
| au8522_writereg(state, 0x80d7, 0xd0); |
| au8522_writereg(state, 0x8250, 0x0d); |
| au8522_writereg(state, 0x8251, 0xcd); |
| au8522_writereg(state, 0x8252, 0xe0); |
| au8522_writereg(state, 0x8253, 0x05); |
| au8522_writereg(state, 0x8254, 0xa7); |
| au8522_writereg(state, 0x8255, 0xff); |
| au8522_writereg(state, 0x8256, 0xed); |
| au8522_writereg(state, 0x8257, 0x5b); |
| au8522_writereg(state, 0x8258, 0xae); |
| au8522_writereg(state, 0x8259, 0xe6); |
| au8522_writereg(state, 0x825a, 0x3d); |
| au8522_writereg(state, 0x825b, 0x0f); |
| au8522_writereg(state, 0x825c, 0x0d); |
| au8522_writereg(state, 0x825d, 0xea); |
| au8522_writereg(state, 0x825e, 0xf2); |
| au8522_writereg(state, 0x825f, 0x51); |
| au8522_writereg(state, 0x8260, 0xf5); |
| au8522_writereg(state, 0x8261, 0x06); |
| au8522_writereg(state, 0x821a, 0x00); |
| au8522_writereg(state, 0x8546, 0x40); |
| au8522_writereg(state, 0x8210, 0x26); |
| au8522_writereg(state, 0x8211, 0xf6); |
| au8522_writereg(state, 0x8212, 0x84); |
| au8522_writereg(state, 0x8213, 0x02); |
| au8522_writereg(state, 0x8502, 0x01); |
| au8522_writereg(state, 0x8121, 0x04); |
| au8522_writereg(state, 0x8122, 0x04); |
| au8522_writereg(state, 0x852e, 0x10); |
| au8522_writereg(state, 0x80a4, 0xca); |
| au8522_writereg(state, 0x80a7, 0x40); |
| au8522_writereg(state, 0x8526, 0x01); |
| break; |
| default: |
| dprintk("%s() Invalid modulation\n", __FUNCTION__); |
| return -EINVAL; |
| } |
| |
| state->current_modulation = m; |
| |
| return 0; |
| } |
| |
| /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ |
| static int au8522_set_frontend (struct dvb_frontend* fe, |
| struct dvb_frontend_parameters *p) |
| { |
| struct au8522_state* state = fe->demodulator_priv; |
| |
| dprintk("%s(frequency=%d)\n", __FUNCTION__, p->frequency); |
| |
| state->current_frequency = p->frequency; |
| |
| au8522_enable_modulation(fe, p->u.vsb.modulation); |
| |
| /* Allow the demod to settle */ |
| msleep(100); |
| |
| if (fe->ops.tuner_ops.set_params) { |
| if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); |
| fe->ops.tuner_ops.set_params(fe, p); |
| if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| |
| return 0; |
| } |
| |
| /* Reset the demod hardware and reset all of the configuration registers |
| to a default state. */ |
| static int au8522_init(struct dvb_frontend* fe) |
| { |
| struct au8522_state* state = fe->demodulator_priv; |
| dprintk("%s()\n", __FUNCTION__); |
| |
| au8522_writereg(state, 0xa4, 1 << 5); |
| |
| au8522_i2c_gate_ctrl(fe, 1); |
| |
| return 0; |
| } |
| |
| static int au8522_read_status(struct dvb_frontend* fe, fe_status_t* status) |
| { |
| struct au8522_state* state = fe->demodulator_priv; |
| u8 reg; |
| u32 tuner_status = 0; |
| |
| *status = 0; |
| |
| if (state->current_modulation == VSB_8) { |
| dprintk("%s() Checking VSB_8\n", __FUNCTION__); |
| //au8522_writereg(state, 0x80a4, 0x20); |
| reg = au8522_readreg(state, 0x4088); |
| if(reg & 0x01) |
| *status |= FE_HAS_VITERBI; |
| if(reg & 0x02) |
| *status |= FE_HAS_LOCK | FE_HAS_SYNC; |
| } else { |
| dprintk("%s() Checking QAM\n", __FUNCTION__); |
| reg = au8522_readreg(state, 0x4541); |
| if(reg & 0x80) |
| *status |= FE_HAS_VITERBI; |
| if(reg & 0x20) |
| *status |= FE_HAS_LOCK | FE_HAS_SYNC; |
| } |
| |
| switch(state->config->status_mode) { |
| case AU8522_DEMODLOCKING: |
| dprintk("%s() DEMODLOCKING\n", __FUNCTION__); |
| if (*status & FE_HAS_VITERBI) |
| *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; |
| break; |
| case AU8522_TUNERLOCKING: |
| /* Get the tuner status */ |
| dprintk("%s() TUNERLOCKING\n", __FUNCTION__); |
| if (fe->ops.tuner_ops.get_status) { |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| fe->ops.tuner_ops.get_status(fe, &tuner_status); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| if (tuner_status) |
| *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; |
| break; |
| } |
| |
| dprintk("%s() status 0x%08x\n", __FUNCTION__, *status); |
| |
| return 0; |
| } |
| |
| static int au8522_read_snr(struct dvb_frontend* fe, u16* snr) |
| { |
| dprintk("%s()\n", __FUNCTION__); |
| |
| *snr = 0; |
| |
| return 0; |
| } |
| |
| static int au8522_read_signal_strength(struct dvb_frontend* fe, |
| u16* signal_strength) |
| { |
| return au8522_read_snr(fe, signal_strength); |
| } |
| |
| static int au8522_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) |
| { |
| struct au8522_state* state = fe->demodulator_priv; |
| |
| *ucblocks = au8522_readreg(state, 0x4087); |
| |
| return 0; |
| } |
| |
| static int au8522_read_ber(struct dvb_frontend* fe, u32* ber) |
| { |
| return au8522_read_ucblocks(fe, ber); |
| } |
| |
| static int au8522_get_frontend(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters *p) |
| { |
| struct au8522_state* state = fe->demodulator_priv; |
| |
| p->frequency = state->current_frequency; |
| p->u.vsb.modulation = state->current_modulation; |
| |
| return 0; |
| } |
| |
| static int au8522_get_tune_settings(struct dvb_frontend* fe, |
| struct dvb_frontend_tune_settings *tune) |
| { |
| tune->min_delay_ms = 1000; |
| return 0; |
| } |
| |
| static void au8522_release(struct dvb_frontend* fe) |
| { |
| struct au8522_state* state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops au8522_ops; |
| |
| struct dvb_frontend* au8522_attach(const struct au8522_config* config, |
| struct i2c_adapter* i2c) |
| { |
| struct au8522_state* state = NULL; |
| |
| /* allocate memory for the internal state */ |
| state = kmalloc(sizeof(struct au8522_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &au8522_ops, |
| sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| |
| if (au8522_init(&state->frontend) != 0) { |
| printk(KERN_ERR "%s: Failed to initialize correctly\n", |
| __FUNCTION__); |
| goto error; |
| } |
| |
| /* Note: Leaving the I2C gate open here. */ |
| au8522_i2c_gate_ctrl(&state->frontend, 1); |
| |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| |
| static struct dvb_frontend_ops au8522_ops = { |
| |
| .info = { |
| .name = "Auvitek AU8522 QAM/8VSB Frontend", |
| .type = FE_ATSC, |
| .frequency_min = 54000000, |
| .frequency_max = 858000000, |
| .frequency_stepsize = 62500, |
| .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB |
| }, |
| |
| .init = au8522_init, |
| .i2c_gate_ctrl = au8522_i2c_gate_ctrl, |
| .set_frontend = au8522_set_frontend, |
| .get_frontend = au8522_get_frontend, |
| .get_tune_settings = au8522_get_tune_settings, |
| .read_status = au8522_read_status, |
| .read_ber = au8522_read_ber, |
| .read_signal_strength = au8522_read_signal_strength, |
| .read_snr = au8522_read_snr, |
| .read_ucblocks = au8522_read_ucblocks, |
| .release = au8522_release, |
| }; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Enable verbose debug messages"); |
| |
| MODULE_DESCRIPTION("Auvitek AU8522 QAM-B/ATSC Demodulator driver"); |
| MODULE_AUTHOR("Steven Toth"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(au8522_attach); |
| |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| */ |