| /* |
| * This file is part of UBIFS. |
| * |
| * Copyright (C) 2006-2008 Nokia Corporation. |
| * Copyright (C) 2006, 2007 University of Szeged, Hungary |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 51 |
| * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| * Authors: Artem Bityutskiy (Битюцкий Артём) |
| * Adrian Hunter |
| * Zoltan Sogor |
| */ |
| |
| /* |
| * This file implements UBIFS I/O subsystem which provides various I/O-related |
| * helper functions (reading/writing/checking/validating nodes) and implements |
| * write-buffering support. Write buffers help to save space which otherwise |
| * would have been wasted for padding to the nearest minimal I/O unit boundary. |
| * Instead, data first goes to the write-buffer and is flushed when the |
| * buffer is full or when it is not used for some time (by timer). This is |
| * similar to the mechanism is used by JFFS2. |
| * |
| * Write-buffers are defined by 'struct ubifs_wbuf' objects and protected by |
| * mutexes defined inside these objects. Since sometimes upper-level code |
| * has to lock the write-buffer (e.g. journal space reservation code), many |
| * functions related to write-buffers have "nolock" suffix which means that the |
| * caller has to lock the write-buffer before calling this function. |
| * |
| * UBIFS stores nodes at 64 bit-aligned addresses. If the node length is not |
| * aligned, UBIFS starts the next node from the aligned address, and the padded |
| * bytes may contain any rubbish. In other words, UBIFS does not put padding |
| * bytes in those small gaps. Common headers of nodes store real node lengths, |
| * not aligned lengths. Indexing nodes also store real lengths in branches. |
| * |
| * UBIFS uses padding when it pads to the next min. I/O unit. In this case it |
| * uses padding nodes or padding bytes, if the padding node does not fit. |
| * |
| * All UBIFS nodes are protected by CRC checksums and UBIFS checks all nodes |
| * every time they are read from the flash media. |
| */ |
| |
| #include <linux/crc32.h> |
| #include <linux/slab.h> |
| #include "ubifs.h" |
| |
| /** |
| * ubifs_ro_mode - switch UBIFS to read read-only mode. |
| * @c: UBIFS file-system description object |
| * @err: error code which is the reason of switching to R/O mode |
| */ |
| void ubifs_ro_mode(struct ubifs_info *c, int err) |
| { |
| if (!c->ro_error) { |
| c->ro_error = 1; |
| c->no_chk_data_crc = 0; |
| c->vfs_sb->s_flags |= MS_RDONLY; |
| ubifs_warn("switched to read-only mode, error %d", err); |
| dbg_dump_stack(); |
| } |
| } |
| |
| /** |
| * ubifs_check_node - check node. |
| * @c: UBIFS file-system description object |
| * @buf: node to check |
| * @lnum: logical eraseblock number |
| * @offs: offset within the logical eraseblock |
| * @quiet: print no messages |
| * @must_chk_crc: indicates whether to always check the CRC |
| * |
| * This function checks node magic number and CRC checksum. This function also |
| * validates node length to prevent UBIFS from becoming crazy when an attacker |
| * feeds it a file-system image with incorrect nodes. For example, too large |
| * node length in the common header could cause UBIFS to read memory outside of |
| * allocated buffer when checking the CRC checksum. |
| * |
| * This function may skip data nodes CRC checking if @c->no_chk_data_crc is |
| * true, which is controlled by corresponding UBIFS mount option. However, if |
| * @must_chk_crc is true, then @c->no_chk_data_crc is ignored and CRC is |
| * checked. Similarly, if @c->always_chk_crc is true, @c->no_chk_data_crc is |
| * ignored and CRC is checked. |
| * |
| * This function returns zero in case of success and %-EUCLEAN in case of bad |
| * CRC or magic. |
| */ |
| int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum, |
| int offs, int quiet, int must_chk_crc) |
| { |
| int err = -EINVAL, type, node_len; |
| uint32_t crc, node_crc, magic; |
| const struct ubifs_ch *ch = buf; |
| |
| ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0); |
| ubifs_assert(!(offs & 7) && offs < c->leb_size); |
| |
| magic = le32_to_cpu(ch->magic); |
| if (magic != UBIFS_NODE_MAGIC) { |
| if (!quiet) |
| ubifs_err("bad magic %#08x, expected %#08x", |
| magic, UBIFS_NODE_MAGIC); |
| err = -EUCLEAN; |
| goto out; |
| } |
| |
| type = ch->node_type; |
| if (type < 0 || type >= UBIFS_NODE_TYPES_CNT) { |
| if (!quiet) |
| ubifs_err("bad node type %d", type); |
| goto out; |
| } |
| |
| node_len = le32_to_cpu(ch->len); |
| if (node_len + offs > c->leb_size) |
| goto out_len; |
| |
| if (c->ranges[type].max_len == 0) { |
| if (node_len != c->ranges[type].len) |
| goto out_len; |
| } else if (node_len < c->ranges[type].min_len || |
| node_len > c->ranges[type].max_len) |
| goto out_len; |
| |
| if (!must_chk_crc && type == UBIFS_DATA_NODE && !c->always_chk_crc && |
| c->no_chk_data_crc) |
| return 0; |
| |
| crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8); |
| node_crc = le32_to_cpu(ch->crc); |
| if (crc != node_crc) { |
| if (!quiet) |
| ubifs_err("bad CRC: calculated %#08x, read %#08x", |
| crc, node_crc); |
| err = -EUCLEAN; |
| goto out; |
| } |
| |
| return 0; |
| |
| out_len: |
| if (!quiet) |
| ubifs_err("bad node length %d", node_len); |
| out: |
| if (!quiet) { |
| ubifs_err("bad node at LEB %d:%d", lnum, offs); |
| dbg_dump_node(c, buf); |
| dbg_dump_stack(); |
| } |
| return err; |
| } |
| |
| /** |
| * ubifs_pad - pad flash space. |
| * @c: UBIFS file-system description object |
| * @buf: buffer to put padding to |
| * @pad: how many bytes to pad |
| * |
| * The flash media obliges us to write only in chunks of %c->min_io_size and |
| * when we have to write less data we add padding node to the write-buffer and |
| * pad it to the next minimal I/O unit's boundary. Padding nodes help when the |
| * media is being scanned. If the amount of wasted space is not enough to fit a |
| * padding node which takes %UBIFS_PAD_NODE_SZ bytes, we write padding bytes |
| * pattern (%UBIFS_PADDING_BYTE). |
| * |
| * Padding nodes are also used to fill gaps when the "commit-in-gaps" method is |
| * used. |
| */ |
| void ubifs_pad(const struct ubifs_info *c, void *buf, int pad) |
| { |
| uint32_t crc; |
| |
| ubifs_assert(pad >= 0 && !(pad & 7)); |
| |
| if (pad >= UBIFS_PAD_NODE_SZ) { |
| struct ubifs_ch *ch = buf; |
| struct ubifs_pad_node *pad_node = buf; |
| |
| ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC); |
| ch->node_type = UBIFS_PAD_NODE; |
| ch->group_type = UBIFS_NO_NODE_GROUP; |
| ch->padding[0] = ch->padding[1] = 0; |
| ch->sqnum = 0; |
| ch->len = cpu_to_le32(UBIFS_PAD_NODE_SZ); |
| pad -= UBIFS_PAD_NODE_SZ; |
| pad_node->pad_len = cpu_to_le32(pad); |
| crc = crc32(UBIFS_CRC32_INIT, buf + 8, UBIFS_PAD_NODE_SZ - 8); |
| ch->crc = cpu_to_le32(crc); |
| memset(buf + UBIFS_PAD_NODE_SZ, 0, pad); |
| } else if (pad > 0) |
| /* Too little space, padding node won't fit */ |
| memset(buf, UBIFS_PADDING_BYTE, pad); |
| } |
| |
| /** |
| * next_sqnum - get next sequence number. |
| * @c: UBIFS file-system description object |
| */ |
| static unsigned long long next_sqnum(struct ubifs_info *c) |
| { |
| unsigned long long sqnum; |
| |
| spin_lock(&c->cnt_lock); |
| sqnum = ++c->max_sqnum; |
| spin_unlock(&c->cnt_lock); |
| |
| if (unlikely(sqnum >= SQNUM_WARN_WATERMARK)) { |
| if (sqnum >= SQNUM_WATERMARK) { |
| ubifs_err("sequence number overflow %llu, end of life", |
| sqnum); |
| ubifs_ro_mode(c, -EINVAL); |
| } |
| ubifs_warn("running out of sequence numbers, end of life soon"); |
| } |
| |
| return sqnum; |
| } |
| |
| /** |
| * ubifs_prepare_node - prepare node to be written to flash. |
| * @c: UBIFS file-system description object |
| * @node: the node to pad |
| * @len: node length |
| * @pad: if the buffer has to be padded |
| * |
| * This function prepares node at @node to be written to the media - it |
| * calculates node CRC, fills the common header, and adds proper padding up to |
| * the next minimum I/O unit if @pad is not zero. |
| */ |
| void ubifs_prepare_node(struct ubifs_info *c, void *node, int len, int pad) |
| { |
| uint32_t crc; |
| struct ubifs_ch *ch = node; |
| unsigned long long sqnum = next_sqnum(c); |
| |
| ubifs_assert(len >= UBIFS_CH_SZ); |
| |
| ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC); |
| ch->len = cpu_to_le32(len); |
| ch->group_type = UBIFS_NO_NODE_GROUP; |
| ch->sqnum = cpu_to_le64(sqnum); |
| ch->padding[0] = ch->padding[1] = 0; |
| crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8); |
| ch->crc = cpu_to_le32(crc); |
| |
| if (pad) { |
| len = ALIGN(len, 8); |
| pad = ALIGN(len, c->min_io_size) - len; |
| ubifs_pad(c, node + len, pad); |
| } |
| } |
| |
| /** |
| * ubifs_prep_grp_node - prepare node of a group to be written to flash. |
| * @c: UBIFS file-system description object |
| * @node: the node to pad |
| * @len: node length |
| * @last: indicates the last node of the group |
| * |
| * This function prepares node at @node to be written to the media - it |
| * calculates node CRC and fills the common header. |
| */ |
| void ubifs_prep_grp_node(struct ubifs_info *c, void *node, int len, int last) |
| { |
| uint32_t crc; |
| struct ubifs_ch *ch = node; |
| unsigned long long sqnum = next_sqnum(c); |
| |
| ubifs_assert(len >= UBIFS_CH_SZ); |
| |
| ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC); |
| ch->len = cpu_to_le32(len); |
| if (last) |
| ch->group_type = UBIFS_LAST_OF_NODE_GROUP; |
| else |
| ch->group_type = UBIFS_IN_NODE_GROUP; |
| ch->sqnum = cpu_to_le64(sqnum); |
| ch->padding[0] = ch->padding[1] = 0; |
| crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8); |
| ch->crc = cpu_to_le32(crc); |
| } |
| |
| /** |
| * wbuf_timer_callback - write-buffer timer callback function. |
| * @data: timer data (write-buffer descriptor) |
| * |
| * This function is called when the write-buffer timer expires. |
| */ |
| static enum hrtimer_restart wbuf_timer_callback_nolock(struct hrtimer *timer) |
| { |
| struct ubifs_wbuf *wbuf = container_of(timer, struct ubifs_wbuf, timer); |
| |
| dbg_io("jhead %s", dbg_jhead(wbuf->jhead)); |
| wbuf->need_sync = 1; |
| wbuf->c->need_wbuf_sync = 1; |
| ubifs_wake_up_bgt(wbuf->c); |
| return HRTIMER_NORESTART; |
| } |
| |
| /** |
| * new_wbuf_timer - start new write-buffer timer. |
| * @wbuf: write-buffer descriptor |
| */ |
| static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf) |
| { |
| ubifs_assert(!hrtimer_active(&wbuf->timer)); |
| |
| if (wbuf->no_timer) |
| return; |
| dbg_io("set timer for jhead %s, %llu-%llu millisecs", |
| dbg_jhead(wbuf->jhead), |
| div_u64(ktime_to_ns(wbuf->softlimit), USEC_PER_SEC), |
| div_u64(ktime_to_ns(wbuf->softlimit) + wbuf->delta, |
| USEC_PER_SEC)); |
| hrtimer_start_range_ns(&wbuf->timer, wbuf->softlimit, wbuf->delta, |
| HRTIMER_MODE_REL); |
| } |
| |
| /** |
| * cancel_wbuf_timer - cancel write-buffer timer. |
| * @wbuf: write-buffer descriptor |
| */ |
| static void cancel_wbuf_timer_nolock(struct ubifs_wbuf *wbuf) |
| { |
| if (wbuf->no_timer) |
| return; |
| wbuf->need_sync = 0; |
| hrtimer_cancel(&wbuf->timer); |
| } |
| |
| /** |
| * ubifs_wbuf_sync_nolock - synchronize write-buffer. |
| * @wbuf: write-buffer to synchronize |
| * |
| * This function synchronizes write-buffer @buf and returns zero in case of |
| * success or a negative error code in case of failure. |
| */ |
| int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf) |
| { |
| struct ubifs_info *c = wbuf->c; |
| int err, dirt; |
| |
| cancel_wbuf_timer_nolock(wbuf); |
| if (!wbuf->used || wbuf->lnum == -1) |
| /* Write-buffer is empty or not seeked */ |
| return 0; |
| |
| dbg_io("LEB %d:%d, %d bytes, jhead %s", |
| wbuf->lnum, wbuf->offs, wbuf->used, dbg_jhead(wbuf->jhead)); |
| ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY)); |
| ubifs_assert(!(wbuf->avail & 7)); |
| ubifs_assert(wbuf->offs + c->min_io_size <= c->leb_size); |
| ubifs_assert(!c->ro_media); |
| |
| if (c->ro_error) |
| return -EROFS; |
| |
| ubifs_pad(c, wbuf->buf + wbuf->used, wbuf->avail); |
| err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs, |
| c->min_io_size, wbuf->dtype); |
| if (err) { |
| ubifs_err("cannot write %d bytes to LEB %d:%d", |
| c->min_io_size, wbuf->lnum, wbuf->offs); |
| dbg_dump_stack(); |
| return err; |
| } |
| |
| dirt = wbuf->avail; |
| |
| spin_lock(&wbuf->lock); |
| wbuf->offs += c->min_io_size; |
| wbuf->avail = c->min_io_size; |
| wbuf->used = 0; |
| wbuf->next_ino = 0; |
| spin_unlock(&wbuf->lock); |
| |
| if (wbuf->sync_callback) |
| err = wbuf->sync_callback(c, wbuf->lnum, |
| c->leb_size - wbuf->offs, dirt); |
| return err; |
| } |
| |
| /** |
| * ubifs_wbuf_seek_nolock - seek write-buffer. |
| * @wbuf: write-buffer |
| * @lnum: logical eraseblock number to seek to |
| * @offs: logical eraseblock offset to seek to |
| * @dtype: data type |
| * |
| * This function targets the write-buffer to logical eraseblock @lnum:@offs. |
| * The write-buffer is synchronized if it is not empty. Returns zero in case of |
| * success and a negative error code in case of failure. |
| */ |
| int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs, |
| int dtype) |
| { |
| const struct ubifs_info *c = wbuf->c; |
| |
| dbg_io("LEB %d:%d, jhead %s", lnum, offs, dbg_jhead(wbuf->jhead)); |
| ubifs_assert(lnum >= 0 && lnum < c->leb_cnt); |
| ubifs_assert(offs >= 0 && offs <= c->leb_size); |
| ubifs_assert(offs % c->min_io_size == 0 && !(offs & 7)); |
| ubifs_assert(lnum != wbuf->lnum); |
| |
| if (wbuf->used > 0) { |
| int err = ubifs_wbuf_sync_nolock(wbuf); |
| |
| if (err) |
| return err; |
| } |
| |
| spin_lock(&wbuf->lock); |
| wbuf->lnum = lnum; |
| wbuf->offs = offs; |
| wbuf->avail = c->min_io_size; |
| wbuf->used = 0; |
| spin_unlock(&wbuf->lock); |
| wbuf->dtype = dtype; |
| |
| return 0; |
| } |
| |
| /** |
| * ubifs_bg_wbufs_sync - synchronize write-buffers. |
| * @c: UBIFS file-system description object |
| * |
| * This function is called by background thread to synchronize write-buffers. |
| * Returns zero in case of success and a negative error code in case of |
| * failure. |
| */ |
| int ubifs_bg_wbufs_sync(struct ubifs_info *c) |
| { |
| int err, i; |
| |
| ubifs_assert(!c->ro_media); |
| if (!c->need_wbuf_sync) |
| return 0; |
| c->need_wbuf_sync = 0; |
| |
| if (c->ro_error) { |
| err = -EROFS; |
| goto out_timers; |
| } |
| |
| dbg_io("synchronize"); |
| for (i = 0; i < c->jhead_cnt; i++) { |
| struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf; |
| |
| cond_resched(); |
| |
| /* |
| * If the mutex is locked then wbuf is being changed, so |
| * synchronization is not necessary. |
| */ |
| if (mutex_is_locked(&wbuf->io_mutex)) |
| continue; |
| |
| mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); |
| if (!wbuf->need_sync) { |
| mutex_unlock(&wbuf->io_mutex); |
| continue; |
| } |
| |
| err = ubifs_wbuf_sync_nolock(wbuf); |
| mutex_unlock(&wbuf->io_mutex); |
| if (err) { |
| ubifs_err("cannot sync write-buffer, error %d", err); |
| ubifs_ro_mode(c, err); |
| goto out_timers; |
| } |
| } |
| |
| return 0; |
| |
| out_timers: |
| /* Cancel all timers to prevent repeated errors */ |
| for (i = 0; i < c->jhead_cnt; i++) { |
| struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf; |
| |
| mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); |
| cancel_wbuf_timer_nolock(wbuf); |
| mutex_unlock(&wbuf->io_mutex); |
| } |
| return err; |
| } |
| |
| /** |
| * ubifs_wbuf_write_nolock - write data to flash via write-buffer. |
| * @wbuf: write-buffer |
| * @buf: node to write |
| * @len: node length |
| * |
| * This function writes data to flash via write-buffer @wbuf. This means that |
| * the last piece of the node won't reach the flash media immediately if it |
| * does not take whole minimal I/O unit. Instead, the node will sit in RAM |
| * until the write-buffer is synchronized (e.g., by timer). |
| * |
| * This function returns zero in case of success and a negative error code in |
| * case of failure. If the node cannot be written because there is no more |
| * space in this logical eraseblock, %-ENOSPC is returned. |
| */ |
| int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len) |
| { |
| struct ubifs_info *c = wbuf->c; |
| int err, written, n, aligned_len = ALIGN(len, 8), offs; |
| |
| dbg_io("%d bytes (%s) to jhead %s wbuf at LEB %d:%d", len, |
| dbg_ntype(((struct ubifs_ch *)buf)->node_type), |
| dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs + wbuf->used); |
| ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt); |
| ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0); |
| ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size); |
| ubifs_assert(wbuf->avail > 0 && wbuf->avail <= c->min_io_size); |
| ubifs_assert(mutex_is_locked(&wbuf->io_mutex)); |
| ubifs_assert(!c->ro_media); |
| |
| if (c->leb_size - wbuf->offs - wbuf->used < aligned_len) { |
| err = -ENOSPC; |
| goto out; |
| } |
| |
| cancel_wbuf_timer_nolock(wbuf); |
| |
| if (c->ro_error) |
| return -EROFS; |
| |
| if (aligned_len <= wbuf->avail) { |
| /* |
| * The node is not very large and fits entirely within |
| * write-buffer. |
| */ |
| memcpy(wbuf->buf + wbuf->used, buf, len); |
| |
| if (aligned_len == wbuf->avail) { |
| dbg_io("flush jhead %s wbuf to LEB %d:%d", |
| dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs); |
| err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, |
| wbuf->offs, c->min_io_size, |
| wbuf->dtype); |
| if (err) |
| goto out; |
| |
| spin_lock(&wbuf->lock); |
| wbuf->offs += c->min_io_size; |
| wbuf->avail = c->min_io_size; |
| wbuf->used = 0; |
| wbuf->next_ino = 0; |
| spin_unlock(&wbuf->lock); |
| } else { |
| spin_lock(&wbuf->lock); |
| wbuf->avail -= aligned_len; |
| wbuf->used += aligned_len; |
| spin_unlock(&wbuf->lock); |
| } |
| |
| goto exit; |
| } |
| |
| /* |
| * The node is large enough and does not fit entirely within current |
| * minimal I/O unit. We have to fill and flush write-buffer and switch |
| * to the next min. I/O unit. |
| */ |
| dbg_io("flush jhead %s wbuf to LEB %d:%d", |
| dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs); |
| memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail); |
| err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs, |
| c->min_io_size, wbuf->dtype); |
| if (err) |
| goto out; |
| |
| offs = wbuf->offs + c->min_io_size; |
| len -= wbuf->avail; |
| aligned_len -= wbuf->avail; |
| written = wbuf->avail; |
| |
| /* |
| * The remaining data may take more whole min. I/O units, so write the |
| * remains multiple to min. I/O unit size directly to the flash media. |
| * We align node length to 8-byte boundary because we anyway flash wbuf |
| * if the remaining space is less than 8 bytes. |
| */ |
| n = aligned_len >> c->min_io_shift; |
| if (n) { |
| n <<= c->min_io_shift; |
| dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum, offs); |
| err = ubi_leb_write(c->ubi, wbuf->lnum, buf + written, offs, n, |
| wbuf->dtype); |
| if (err) |
| goto out; |
| offs += n; |
| aligned_len -= n; |
| len -= n; |
| written += n; |
| } |
| |
| spin_lock(&wbuf->lock); |
| if (aligned_len) |
| /* |
| * And now we have what's left and what does not take whole |
| * min. I/O unit, so write it to the write-buffer and we are |
| * done. |
| */ |
| memcpy(wbuf->buf, buf + written, len); |
| |
| wbuf->offs = offs; |
| wbuf->used = aligned_len; |
| wbuf->avail = c->min_io_size - aligned_len; |
| wbuf->next_ino = 0; |
| spin_unlock(&wbuf->lock); |
| |
| exit: |
| if (wbuf->sync_callback) { |
| int free = c->leb_size - wbuf->offs - wbuf->used; |
| |
| err = wbuf->sync_callback(c, wbuf->lnum, free, 0); |
| if (err) |
| goto out; |
| } |
| |
| if (wbuf->used) |
| new_wbuf_timer_nolock(wbuf); |
| |
| return 0; |
| |
| out: |
| ubifs_err("cannot write %d bytes to LEB %d:%d, error %d", |
| len, wbuf->lnum, wbuf->offs, err); |
| dbg_dump_node(c, buf); |
| dbg_dump_stack(); |
| dbg_dump_leb(c, wbuf->lnum); |
| return err; |
| } |
| |
| /** |
| * ubifs_write_node - write node to the media. |
| * @c: UBIFS file-system description object |
| * @buf: the node to write |
| * @len: node length |
| * @lnum: logical eraseblock number |
| * @offs: offset within the logical eraseblock |
| * @dtype: node life-time hint (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) |
| * |
| * This function automatically fills node magic number, assigns sequence |
| * number, and calculates node CRC checksum. The length of the @buf buffer has |
| * to be aligned to the minimal I/O unit size. This function automatically |
| * appends padding node and padding bytes if needed. Returns zero in case of |
| * success and a negative error code in case of failure. |
| */ |
| int ubifs_write_node(struct ubifs_info *c, void *buf, int len, int lnum, |
| int offs, int dtype) |
| { |
| int err, buf_len = ALIGN(len, c->min_io_size); |
| |
| dbg_io("LEB %d:%d, %s, length %d (aligned %d)", |
| lnum, offs, dbg_ntype(((struct ubifs_ch *)buf)->node_type), len, |
| buf_len); |
| ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0); |
| ubifs_assert(offs % c->min_io_size == 0 && offs < c->leb_size); |
| ubifs_assert(!c->ro_media); |
| |
| if (c->ro_error) |
| return -EROFS; |
| |
| ubifs_prepare_node(c, buf, len, 1); |
| err = ubi_leb_write(c->ubi, lnum, buf, offs, buf_len, dtype); |
| if (err) { |
| ubifs_err("cannot write %d bytes to LEB %d:%d, error %d", |
| buf_len, lnum, offs, err); |
| dbg_dump_node(c, buf); |
| dbg_dump_stack(); |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ubifs_read_node_wbuf - read node from the media or write-buffer. |
| * @wbuf: wbuf to check for un-written data |
| * @buf: buffer to read to |
| * @type: node type |
| * @len: node length |
| * @lnum: logical eraseblock number |
| * @offs: offset within the logical eraseblock |
| * |
| * This function reads a node of known type and length, checks it and stores |
| * in @buf. If the node partially or fully sits in the write-buffer, this |
| * function takes data from the buffer, otherwise it reads the flash media. |
| * Returns zero in case of success, %-EUCLEAN if CRC mismatched and a negative |
| * error code in case of failure. |
| */ |
| int ubifs_read_node_wbuf(struct ubifs_wbuf *wbuf, void *buf, int type, int len, |
| int lnum, int offs) |
| { |
| const struct ubifs_info *c = wbuf->c; |
| int err, rlen, overlap; |
| struct ubifs_ch *ch = buf; |
| |
| dbg_io("LEB %d:%d, %s, length %d, jhead %s", lnum, offs, |
| dbg_ntype(type), len, dbg_jhead(wbuf->jhead)); |
| ubifs_assert(wbuf && lnum >= 0 && lnum < c->leb_cnt && offs >= 0); |
| ubifs_assert(!(offs & 7) && offs < c->leb_size); |
| ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT); |
| |
| spin_lock(&wbuf->lock); |
| overlap = (lnum == wbuf->lnum && offs + len > wbuf->offs); |
| if (!overlap) { |
| /* We may safely unlock the write-buffer and read the data */ |
| spin_unlock(&wbuf->lock); |
| return ubifs_read_node(c, buf, type, len, lnum, offs); |
| } |
| |
| /* Don't read under wbuf */ |
| rlen = wbuf->offs - offs; |
| if (rlen < 0) |
| rlen = 0; |
| |
| /* Copy the rest from the write-buffer */ |
| memcpy(buf + rlen, wbuf->buf + offs + rlen - wbuf->offs, len - rlen); |
| spin_unlock(&wbuf->lock); |
| |
| if (rlen > 0) { |
| /* Read everything that goes before write-buffer */ |
| err = ubi_read(c->ubi, lnum, buf, offs, rlen); |
| if (err && err != -EBADMSG) { |
| ubifs_err("failed to read node %d from LEB %d:%d, " |
| "error %d", type, lnum, offs, err); |
| dbg_dump_stack(); |
| return err; |
| } |
| } |
| |
| if (type != ch->node_type) { |
| ubifs_err("bad node type (%d but expected %d)", |
| ch->node_type, type); |
| goto out; |
| } |
| |
| err = ubifs_check_node(c, buf, lnum, offs, 0, 0); |
| if (err) { |
| ubifs_err("expected node type %d", type); |
| return err; |
| } |
| |
| rlen = le32_to_cpu(ch->len); |
| if (rlen != len) { |
| ubifs_err("bad node length %d, expected %d", rlen, len); |
| goto out; |
| } |
| |
| return 0; |
| |
| out: |
| ubifs_err("bad node at LEB %d:%d", lnum, offs); |
| dbg_dump_node(c, buf); |
| dbg_dump_stack(); |
| return -EINVAL; |
| } |
| |
| /** |
| * ubifs_read_node - read node. |
| * @c: UBIFS file-system description object |
| * @buf: buffer to read to |
| * @type: node type |
| * @len: node length (not aligned) |
| * @lnum: logical eraseblock number |
| * @offs: offset within the logical eraseblock |
| * |
| * This function reads a node of known type and and length, checks it and |
| * stores in @buf. Returns zero in case of success, %-EUCLEAN if CRC mismatched |
| * and a negative error code in case of failure. |
| */ |
| int ubifs_read_node(const struct ubifs_info *c, void *buf, int type, int len, |
| int lnum, int offs) |
| { |
| int err, l; |
| struct ubifs_ch *ch = buf; |
| |
| dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len); |
| ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0); |
| ubifs_assert(len >= UBIFS_CH_SZ && offs + len <= c->leb_size); |
| ubifs_assert(!(offs & 7) && offs < c->leb_size); |
| ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT); |
| |
| err = ubi_read(c->ubi, lnum, buf, offs, len); |
| if (err && err != -EBADMSG) { |
| ubifs_err("cannot read node %d from LEB %d:%d, error %d", |
| type, lnum, offs, err); |
| return err; |
| } |
| |
| if (type != ch->node_type) { |
| ubifs_err("bad node type (%d but expected %d)", |
| ch->node_type, type); |
| goto out; |
| } |
| |
| err = ubifs_check_node(c, buf, lnum, offs, 0, 0); |
| if (err) { |
| ubifs_err("expected node type %d", type); |
| return err; |
| } |
| |
| l = le32_to_cpu(ch->len); |
| if (l != len) { |
| ubifs_err("bad node length %d, expected %d", l, len); |
| goto out; |
| } |
| |
| return 0; |
| |
| out: |
| ubifs_err("bad node at LEB %d:%d, LEB mapping status %d", lnum, offs, |
| ubi_is_mapped(c->ubi, lnum)); |
| dbg_dump_node(c, buf); |
| dbg_dump_stack(); |
| return -EINVAL; |
| } |
| |
| /** |
| * ubifs_wbuf_init - initialize write-buffer. |
| * @c: UBIFS file-system description object |
| * @wbuf: write-buffer to initialize |
| * |
| * This function initializes write-buffer. Returns zero in case of success |
| * %-ENOMEM in case of failure. |
| */ |
| int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf) |
| { |
| size_t size; |
| |
| wbuf->buf = kmalloc(c->min_io_size, GFP_KERNEL); |
| if (!wbuf->buf) |
| return -ENOMEM; |
| |
| size = (c->min_io_size / UBIFS_CH_SZ + 1) * sizeof(ino_t); |
| wbuf->inodes = kmalloc(size, GFP_KERNEL); |
| if (!wbuf->inodes) { |
| kfree(wbuf->buf); |
| wbuf->buf = NULL; |
| return -ENOMEM; |
| } |
| |
| wbuf->used = 0; |
| wbuf->lnum = wbuf->offs = -1; |
| wbuf->avail = c->min_io_size; |
| wbuf->dtype = UBI_UNKNOWN; |
| wbuf->sync_callback = NULL; |
| mutex_init(&wbuf->io_mutex); |
| spin_lock_init(&wbuf->lock); |
| wbuf->c = c; |
| wbuf->next_ino = 0; |
| |
| hrtimer_init(&wbuf->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| wbuf->timer.function = wbuf_timer_callback_nolock; |
| wbuf->softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0); |
| wbuf->delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT; |
| wbuf->delta *= 1000000000ULL; |
| ubifs_assert(wbuf->delta <= ULONG_MAX); |
| return 0; |
| } |
| |
| /** |
| * ubifs_wbuf_add_ino_nolock - add an inode number into the wbuf inode array. |
| * @wbuf: the write-buffer where to add |
| * @inum: the inode number |
| * |
| * This function adds an inode number to the inode array of the write-buffer. |
| */ |
| void ubifs_wbuf_add_ino_nolock(struct ubifs_wbuf *wbuf, ino_t inum) |
| { |
| if (!wbuf->buf) |
| /* NOR flash or something similar */ |
| return; |
| |
| spin_lock(&wbuf->lock); |
| if (wbuf->used) |
| wbuf->inodes[wbuf->next_ino++] = inum; |
| spin_unlock(&wbuf->lock); |
| } |
| |
| /** |
| * wbuf_has_ino - returns if the wbuf contains data from the inode. |
| * @wbuf: the write-buffer |
| * @inum: the inode number |
| * |
| * This function returns with %1 if the write-buffer contains some data from the |
| * given inode otherwise it returns with %0. |
| */ |
| static int wbuf_has_ino(struct ubifs_wbuf *wbuf, ino_t inum) |
| { |
| int i, ret = 0; |
| |
| spin_lock(&wbuf->lock); |
| for (i = 0; i < wbuf->next_ino; i++) |
| if (inum == wbuf->inodes[i]) { |
| ret = 1; |
| break; |
| } |
| spin_unlock(&wbuf->lock); |
| |
| return ret; |
| } |
| |
| /** |
| * ubifs_sync_wbufs_by_inode - synchronize write-buffers for an inode. |
| * @c: UBIFS file-system description object |
| * @inode: inode to synchronize |
| * |
| * This function synchronizes write-buffers which contain nodes belonging to |
| * @inode. Returns zero in case of success and a negative error code in case of |
| * failure. |
| */ |
| int ubifs_sync_wbufs_by_inode(struct ubifs_info *c, struct inode *inode) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < c->jhead_cnt; i++) { |
| struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf; |
| |
| if (i == GCHD) |
| /* |
| * GC head is special, do not look at it. Even if the |
| * head contains something related to this inode, it is |
| * a _copy_ of corresponding on-flash node which sits |
| * somewhere else. |
| */ |
| continue; |
| |
| if (!wbuf_has_ino(wbuf, inode->i_ino)) |
| continue; |
| |
| mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); |
| if (wbuf_has_ino(wbuf, inode->i_ino)) |
| err = ubifs_wbuf_sync_nolock(wbuf); |
| mutex_unlock(&wbuf->io_mutex); |
| |
| if (err) { |
| ubifs_ro_mode(c, err); |
| return err; |
| } |
| } |
| return 0; |
| } |