| /* |
| * T1023 Silicon/SoC Device Tree Source (post include) |
| * |
| * Copyright 2014 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <dt-bindings/thermal/thermal.h> |
| |
| &bman_fbpr { |
| compatible = "fsl,bman-fbpr"; |
| alloc-ranges = <0 0 0x10000 0>; |
| }; |
| |
| &qman_fqd { |
| compatible = "fsl,qman-fqd"; |
| alloc-ranges = <0 0 0x10000 0>; |
| }; |
| |
| &qman_pfdr { |
| compatible = "fsl,qman-pfdr"; |
| alloc-ranges = <0 0 0x10000 0>; |
| }; |
| |
| &ifc { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,ifc", "simple-bus"; |
| interrupts = <25 2 0 0>; |
| }; |
| |
| &pci0 { |
| compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0x0 0xff>; |
| interrupts = <20 2 0 0>; |
| fsl,iommu-parent = <&pamu0>; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <20 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 40 1 0 0 |
| 0000 0 0 2 &mpic 1 1 0 0 |
| 0000 0 0 3 &mpic 2 1 0 0 |
| 0000 0 0 4 &mpic 3 1 0 0 |
| >; |
| }; |
| }; |
| |
| &pci1 { |
| compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0 0xff>; |
| interrupts = <21 2 0 0>; |
| fsl,iommu-parent = <&pamu0>; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <21 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 41 1 0 0 |
| 0000 0 0 2 &mpic 5 1 0 0 |
| 0000 0 0 3 &mpic 6 1 0 0 |
| 0000 0 0 4 &mpic 7 1 0 0 |
| >; |
| }; |
| }; |
| |
| &pci2 { |
| compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0x0 0xff>; |
| interrupts = <22 2 0 0>; |
| fsl,iommu-parent = <&pamu0>; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <22 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 42 1 0 0 |
| 0000 0 0 2 &mpic 9 1 0 0 |
| 0000 0 0 3 &mpic 10 1 0 0 |
| 0000 0 0 4 &mpic 11 1 0 0 |
| >; |
| }; |
| }; |
| |
| &dcsr { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,dcsr", "simple-bus"; |
| |
| dcsr-epu@0 { |
| compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu"; |
| interrupts = <52 2 0 0 |
| 84 2 0 0 |
| 85 2 0 0>; |
| reg = <0x0 0x1000>; |
| }; |
| dcsr-npc { |
| compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc"; |
| reg = <0x1000 0x1000 0x1002000 0x10000>; |
| }; |
| dcsr-nxc@2000 { |
| compatible = "fsl,dcsr-nxc"; |
| reg = <0x2000 0x1000>; |
| }; |
| dcsr-corenet { |
| compatible = "fsl,dcsr-corenet"; |
| reg = <0x8000 0x1000 0x1A000 0x1000>; |
| }; |
| dcsr-ocn@11000 { |
| compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn"; |
| reg = <0x11000 0x1000>; |
| }; |
| dcsr-ddr@12000 { |
| compatible = "fsl,dcsr-ddr"; |
| dev-handle = <&ddr1>; |
| reg = <0x12000 0x1000>; |
| }; |
| dcsr-nal@18000 { |
| compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal"; |
| reg = <0x18000 0x1000>; |
| }; |
| dcsr-rcpm@22000 { |
| compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm"; |
| reg = <0x22000 0x1000>; |
| }; |
| dcsr-snpc@30000 { |
| compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc"; |
| reg = <0x30000 0x1000 0x1022000 0x10000>; |
| }; |
| dcsr-snpc@31000 { |
| compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc"; |
| reg = <0x31000 0x1000 0x1042000 0x10000>; |
| }; |
| dcsr-cpu-sb-proxy@100000 { |
| compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| cpu-handle = <&cpu0>; |
| reg = <0x100000 0x1000 0x101000 0x1000>; |
| }; |
| dcsr-cpu-sb-proxy@108000 { |
| compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| cpu-handle = <&cpu1>; |
| reg = <0x108000 0x1000 0x109000 0x1000>; |
| }; |
| }; |
| |
| &bportals { |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| compatible = "simple-bus"; |
| |
| bman-portal@0 { |
| cell-index = <0x0>; |
| compatible = "fsl,bman-portal"; |
| reg = <0x0 0x4000>, <0x1000000 0x1000>; |
| interrupts = <105 2 0 0>; |
| }; |
| bman-portal@4000 { |
| cell-index = <0x1>; |
| compatible = "fsl,bman-portal"; |
| reg = <0x4000 0x4000>, <0x1001000 0x1000>; |
| interrupts = <107 2 0 0>; |
| }; |
| bman-portal@8000 { |
| cell-index = <2>; |
| compatible = "fsl,bman-portal"; |
| reg = <0x8000 0x4000>, <0x1002000 0x1000>; |
| interrupts = <109 2 0 0>; |
| }; |
| bman-portal@c000 { |
| cell-index = <0x3>; |
| compatible = "fsl,bman-portal"; |
| reg = <0xc000 0x4000>, <0x1003000 0x1000>; |
| interrupts = <111 2 0 0>; |
| }; |
| bman-portal@10000 { |
| cell-index = <0x4>; |
| compatible = "fsl,bman-portal"; |
| reg = <0x10000 0x4000>, <0x1004000 0x1000>; |
| interrupts = <113 2 0 0>; |
| }; |
| bman-portal@14000 { |
| cell-index = <0x5>; |
| compatible = "fsl,bman-portal"; |
| reg = <0x14000 0x4000>, <0x1005000 0x1000>; |
| interrupts = <115 2 0 0>; |
| }; |
| }; |
| |
| &qportals { |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| compatible = "simple-bus"; |
| |
| qportal0: qman-portal@0 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x0 0x4000>, <0x1000000 0x1000>; |
| interrupts = <104 0x2 0 0>; |
| cell-index = <0x0>; |
| }; |
| qportal1: qman-portal@4000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x4000 0x4000>, <0x1001000 0x1000>; |
| interrupts = <106 0x2 0 0>; |
| cell-index = <0x1>; |
| }; |
| qportal2: qman-portal@8000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x8000 0x4000>, <0x1002000 0x1000>; |
| interrupts = <108 0x2 0 0>; |
| cell-index = <0x2>; |
| }; |
| qportal3: qman-portal@c000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0xc000 0x4000>, <0x1003000 0x1000>; |
| interrupts = <110 0x2 0 0>; |
| cell-index = <0x3>; |
| }; |
| qportal4: qman-portal@10000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x10000 0x4000>, <0x1004000 0x1000>; |
| interrupts = <112 0x2 0 0>; |
| cell-index = <0x4>; |
| }; |
| qportal5: qman-portal@14000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x14000 0x4000>, <0x1005000 0x1000>; |
| interrupts = <114 0x2 0 0>; |
| cell-index = <0x5>; |
| }; |
| }; |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| |
| soc-sram-error { |
| compatible = "fsl,soc-sram-error"; |
| interrupts = <16 2 1 29>; |
| }; |
| |
| corenet-law@0 { |
| compatible = "fsl,corenet-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <16>; |
| }; |
| |
| ddr1: memory-controller@8000 { |
| compatible = "fsl,qoriq-memory-controller-v5.0", |
| "fsl,qoriq-memory-controller"; |
| reg = <0x8000 0x1000>; |
| interrupts = <16 2 1 23>; |
| }; |
| |
| cpc: l3-cache-controller@10000 { |
| compatible = "fsl,t1023-l3-cache-controller", "cache"; |
| reg = <0x10000 0x1000>; |
| interrupts = <16 2 1 27>; |
| }; |
| |
| corenet-cf@18000 { |
| compatible = "fsl,corenet2-cf"; |
| reg = <0x18000 0x1000>; |
| interrupts = <16 2 1 31>; |
| }; |
| |
| iommu@20000 { |
| compatible = "fsl,pamu-v1.0", "fsl,pamu"; |
| reg = <0x20000 0x1000>; |
| ranges = <0 0x20000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupts = < |
| 24 2 0 0 |
| 16 2 1 30>; |
| pamu0: pamu@0 { |
| reg = <0 0x1000>; |
| fsl,primary-cache-geometry = <128 1>; |
| fsl,secondary-cache-geometry = <32 2>; |
| }; |
| }; |
| |
| /include/ "qoriq-mpic.dtsi" |
| |
| guts: global-utilities@e0000 { |
| compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0"; |
| reg = <0xe0000 0xe00>; |
| fsl,has-rstcr; |
| fsl,liodn-bits = <12>; |
| }; |
| |
| /include/ "qoriq-clockgen2.dtsi" |
| global-utilities@e1000 { |
| compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0"; |
| }; |
| |
| rcpm: global-utilities@e2000 { |
| compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.1"; |
| reg = <0xe2000 0x1000>; |
| }; |
| |
| sfp: sfp@e8000 { |
| compatible = "fsl,t1023-sfp"; |
| reg = <0xe8000 0x1000>; |
| }; |
| |
| serdes: serdes@ea000 { |
| compatible = "fsl,t1023-serdes"; |
| reg = <0xea000 0x4000>; |
| }; |
| |
| tmu: tmu@f0000 { |
| compatible = "fsl,qoriq-tmu"; |
| reg = <0xf0000 0x1000>; |
| interrupts = <18 2 0 0>; |
| fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; |
| fsl,tmu-calibration = |
| <0x00000000 0x0000000f>, |
| <0x00000001 0x00000017>, |
| <0x00000002 0x0000001e>, |
| <0x00000003 0x00000026>, |
| <0x00000004 0x0000002e>, |
| <0x00000005 0x00000035>, |
| <0x00000006 0x0000003d>, |
| <0x00000007 0x00000044>, |
| <0x00000008 0x0000004c>, |
| <0x00000009 0x00000053>, |
| <0x0000000a 0x0000005b>, |
| <0x0000000b 0x00000064>, |
| |
| <0x00010000 0x00000011>, |
| <0x00010001 0x0000001c>, |
| <0x00010002 0x00000024>, |
| <0x00010003 0x0000002b>, |
| <0x00010004 0x00000034>, |
| <0x00010005 0x00000039>, |
| <0x00010006 0x00000042>, |
| <0x00010007 0x0000004c>, |
| <0x00010008 0x00000051>, |
| <0x00010009 0x0000005a>, |
| <0x0001000a 0x00000063>, |
| |
| <0x00020000 0x00000013>, |
| <0x00020001 0x00000019>, |
| <0x00020002 0x00000024>, |
| <0x00020003 0x0000002c>, |
| <0x00020004 0x00000035>, |
| <0x00020005 0x0000003d>, |
| <0x00020006 0x00000046>, |
| <0x00020007 0x00000050>, |
| <0x00020008 0x00000059>, |
| |
| <0x00030000 0x00000002>, |
| <0x00030001 0x0000000d>, |
| <0x00030002 0x00000019>, |
| <0x00030003 0x00000024>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| thermal-zones { |
| cpu_thermal: cpu-thermal { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| |
| thermal-sensors = <&tmu 0>; |
| |
| trips { |
| cpu_alert: cpu-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit: cpu-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert>; |
| cooling-device = |
| <&cpu0 THERMAL_NO_LIMIT |
| THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu_alert>; |
| cooling-device = |
| <&cpu1 THERMAL_NO_LIMIT |
| THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| |
| scfg: global-utilities@fc000 { |
| compatible = "fsl,t1023-scfg"; |
| reg = <0xfc000 0x1000>; |
| }; |
| |
| /include/ "elo3-dma-0.dtsi" |
| /include/ "elo3-dma-1.dtsi" |
| |
| /include/ "qoriq-espi-0.dtsi" |
| spi@110000 { |
| fsl,espi-num-chipselects = <4>; |
| }; |
| |
| /include/ "qoriq-esdhc-0.dtsi" |
| sdhc@114000 { |
| compatible = "fsl,t1023-esdhc", "fsl,esdhc"; |
| fsl,iommu-parent = <&pamu0>; |
| fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ |
| sdhci,auto-cmd12; |
| no-1-8-v; |
| }; |
| /include/ "qoriq-i2c-0.dtsi" |
| /include/ "qoriq-i2c-1.dtsi" |
| /include/ "qoriq-duart-0.dtsi" |
| /include/ "qoriq-duart-1.dtsi" |
| /include/ "qoriq-gpio-0.dtsi" |
| /include/ "qoriq-gpio-1.dtsi" |
| /include/ "qoriq-gpio-2.dtsi" |
| /include/ "qoriq-gpio-3.dtsi" |
| /include/ "qoriq-usb2-mph-0.dtsi" |
| usb0: usb@210000 { |
| compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; |
| fsl,iommu-parent = <&pamu0>; |
| fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ |
| phy_type = "utmi"; |
| port0; |
| }; |
| /include/ "qoriq-usb2-dr-0.dtsi" |
| usb1: usb@211000 { |
| compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; |
| fsl,iommu-parent = <&pamu0>; |
| fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ |
| dr_mode = "host"; |
| phy_type = "utmi"; |
| }; |
| /include/ "qoriq-sata2-0.dtsi" |
| sata@220000 { |
| fsl,iommu-parent = <&pamu0>; |
| fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ |
| }; |
| |
| /include/ "qoriq-sec5.0-0.dtsi" |
| /include/ "qoriq-qman3.dtsi" |
| /include/ "qoriq-bman1.dtsi" |
| |
| /include/ "qoriq-fman3l-0.dtsi" |
| /include/ "qoriq-fman3-0-10g-0-best-effort.dtsi" |
| /include/ "qoriq-fman3-0-1g-1.dtsi" |
| /include/ "qoriq-fman3-0-1g-2.dtsi" |
| /include/ "qoriq-fman3-0-1g-3.dtsi" |
| fman@400000 { |
| enet0: ethernet@e0000 { |
| }; |
| |
| enet1: ethernet@e2000 { |
| }; |
| |
| enet2: ethernet@e4000 { |
| }; |
| |
| enet3: ethernet@e6000 { |
| }; |
| }; |
| }; |
