| /* |
| * arch/arm/mach-lpc32xx/common.c |
| * |
| * Author: Kevin Wells <kevin.wells@nxp.com> |
| * |
| * Copyright (C) 2010 NXP Semiconductors |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-pnx.h> |
| #include <linux/io.h> |
| |
| #include <asm/mach/map.h> |
| |
| #include <mach/i2c.h> |
| #include <mach/hardware.h> |
| #include <mach/platform.h> |
| #include "common.h" |
| |
| /* |
| * Watchdog timer |
| */ |
| static struct resource watchdog_resources[] = { |
| [0] = { |
| .start = LPC32XX_WDTIM_BASE, |
| .end = LPC32XX_WDTIM_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| struct platform_device lpc32xx_watchdog_device = { |
| .name = "pnx4008-watchdog", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(watchdog_resources), |
| .resource = watchdog_resources, |
| }; |
| |
| /* |
| * I2C busses |
| */ |
| static struct i2c_pnx_data i2c0_data = { |
| .name = I2C_CHIP_NAME "1", |
| .base = LPC32XX_I2C1_BASE, |
| .irq = IRQ_LPC32XX_I2C_1, |
| }; |
| |
| static struct i2c_pnx_data i2c1_data = { |
| .name = I2C_CHIP_NAME "2", |
| .base = LPC32XX_I2C2_BASE, |
| .irq = IRQ_LPC32XX_I2C_2, |
| }; |
| |
| static struct i2c_pnx_data i2c2_data = { |
| .name = "USB-I2C", |
| .base = LPC32XX_OTG_I2C_BASE, |
| .irq = IRQ_LPC32XX_USB_I2C, |
| }; |
| |
| struct platform_device lpc32xx_i2c0_device = { |
| .name = "pnx-i2c", |
| .id = 0, |
| .dev = { |
| .platform_data = &i2c0_data, |
| }, |
| }; |
| |
| struct platform_device lpc32xx_i2c1_device = { |
| .name = "pnx-i2c", |
| .id = 1, |
| .dev = { |
| .platform_data = &i2c1_data, |
| }, |
| }; |
| |
| struct platform_device lpc32xx_i2c2_device = { |
| .name = "pnx-i2c", |
| .id = 2, |
| .dev = { |
| .platform_data = &i2c2_data, |
| }, |
| }; |
| |
| /* TSC (Touch Screen Controller) */ |
| |
| static struct resource lpc32xx_tsc_resources[] = { |
| { |
| .start = LPC32XX_ADC_BASE, |
| .end = LPC32XX_ADC_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = IRQ_LPC32XX_TS_IRQ, |
| .end = IRQ_LPC32XX_TS_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| struct platform_device lpc32xx_tsc_device = { |
| .name = "ts-lpc32xx", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(lpc32xx_tsc_resources), |
| .resource = lpc32xx_tsc_resources, |
| }; |
| |
| /* RTC */ |
| |
| static struct resource lpc32xx_rtc_resources[] = { |
| { |
| .start = LPC32XX_RTC_BASE, |
| .end = LPC32XX_RTC_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| },{ |
| .start = IRQ_LPC32XX_RTC, |
| .end = IRQ_LPC32XX_RTC, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| struct platform_device lpc32xx_rtc_device = { |
| .name = "rtc-lpc32xx", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(lpc32xx_rtc_resources), |
| .resource = lpc32xx_rtc_resources, |
| }; |
| |
| /* |
| * Returns the unique ID for the device |
| */ |
| void lpc32xx_get_uid(u32 devid[4]) |
| { |
| int i; |
| |
| for (i = 0; i < 4; i++) |
| devid[i] = __raw_readl(LPC32XX_CLKPWR_DEVID(i << 2)); |
| } |
| |
| /* |
| * Returns SYSCLK source |
| * 0 = PLL397, 1 = main oscillator |
| */ |
| int clk_is_sysclk_mainosc(void) |
| { |
| if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) & |
| LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* |
| * System reset via the watchdog timer |
| */ |
| static void lpc32xx_watchdog_reset(void) |
| { |
| /* Make sure WDT clocks are enabled */ |
| __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN, |
| LPC32XX_CLKPWR_TIMER_CLK_CTRL); |
| |
| /* Instant assert of RESETOUT_N with pulse length 1mS */ |
| __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18)); |
| __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC)); |
| } |
| |
| /* |
| * Detects and returns IRAM size for the device variation |
| */ |
| #define LPC32XX_IRAM_BANK_SIZE SZ_128K |
| static u32 iram_size; |
| u32 lpc32xx_return_iram_size(void) |
| { |
| if (iram_size == 0) { |
| u32 savedval1, savedval2; |
| void __iomem *iramptr1, *iramptr2; |
| |
| iramptr1 = io_p2v(LPC32XX_IRAM_BASE); |
| iramptr2 = io_p2v(LPC32XX_IRAM_BASE + LPC32XX_IRAM_BANK_SIZE); |
| savedval1 = __raw_readl(iramptr1); |
| savedval2 = __raw_readl(iramptr2); |
| |
| if (savedval1 == savedval2) { |
| __raw_writel(savedval2 + 1, iramptr2); |
| if (__raw_readl(iramptr1) == savedval2 + 1) |
| iram_size = LPC32XX_IRAM_BANK_SIZE; |
| else |
| iram_size = LPC32XX_IRAM_BANK_SIZE * 2; |
| __raw_writel(savedval2, iramptr2); |
| } else |
| iram_size = LPC32XX_IRAM_BANK_SIZE * 2; |
| } |
| |
| return iram_size; |
| } |
| |
| /* |
| * Computes PLL rate from PLL register and input clock |
| */ |
| u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup) |
| { |
| u32 ilfreq, p, m, n, fcco, fref, cfreq; |
| int mode; |
| |
| /* |
| * PLL requirements |
| * ifreq must be >= 1MHz and <= 20MHz |
| * FCCO must be >= 156MHz and <= 320MHz |
| * FREF must be >= 1MHz and <= 27MHz |
| * Assume the passed input data is not valid |
| */ |
| |
| ilfreq = ifreq; |
| m = pllsetup->pll_m; |
| n = pllsetup->pll_n; |
| p = pllsetup->pll_p; |
| |
| mode = (pllsetup->cco_bypass_b15 << 2) | |
| (pllsetup->direct_output_b14 << 1) | |
| pllsetup->fdbk_div_ctrl_b13; |
| |
| switch (mode) { |
| case 0x0: /* Non-integer mode */ |
| cfreq = (m * ilfreq) / (2 * p * n); |
| fcco = (m * ilfreq) / n; |
| fref = ilfreq / n; |
| break; |
| |
| case 0x1: /* integer mode */ |
| cfreq = (m * ilfreq) / n; |
| fcco = (m * ilfreq) / (n * 2 * p); |
| fref = ilfreq / n; |
| break; |
| |
| case 0x2: |
| case 0x3: /* Direct mode */ |
| cfreq = (m * ilfreq) / n; |
| fcco = cfreq; |
| fref = ilfreq / n; |
| break; |
| |
| case 0x4: |
| case 0x5: /* Bypass mode */ |
| cfreq = ilfreq / (2 * p); |
| fcco = 156000000; |
| fref = 1000000; |
| break; |
| |
| case 0x6: |
| case 0x7: /* Direct bypass mode */ |
| default: |
| cfreq = ilfreq; |
| fcco = 156000000; |
| fref = 1000000; |
| break; |
| } |
| |
| if (fcco < 156000000 || fcco > 320000000) |
| cfreq = 0; |
| |
| if (fref < 1000000 || fref > 27000000) |
| cfreq = 0; |
| |
| return (u32) cfreq; |
| } |
| |
| u32 clk_get_pclk_div(void) |
| { |
| return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F); |
| } |
| |
| static struct map_desc lpc32xx_io_desc[] __initdata = { |
| { |
| .virtual = IO_ADDRESS(LPC32XX_AHB0_START), |
| .pfn = __phys_to_pfn(LPC32XX_AHB0_START), |
| .length = LPC32XX_AHB0_SIZE, |
| .type = MT_DEVICE |
| }, |
| { |
| .virtual = IO_ADDRESS(LPC32XX_AHB1_START), |
| .pfn = __phys_to_pfn(LPC32XX_AHB1_START), |
| .length = LPC32XX_AHB1_SIZE, |
| .type = MT_DEVICE |
| }, |
| { |
| .virtual = IO_ADDRESS(LPC32XX_FABAPB_START), |
| .pfn = __phys_to_pfn(LPC32XX_FABAPB_START), |
| .length = LPC32XX_FABAPB_SIZE, |
| .type = MT_DEVICE |
| }, |
| { |
| .virtual = IO_ADDRESS(LPC32XX_IRAM_BASE), |
| .pfn = __phys_to_pfn(LPC32XX_IRAM_BASE), |
| .length = (LPC32XX_IRAM_BANK_SIZE * 2), |
| .type = MT_DEVICE |
| }, |
| }; |
| |
| void __init lpc32xx_map_io(void) |
| { |
| iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc)); |
| } |
| |
| void lpc23xx_restart(char mode, const char *cmd) |
| { |
| switch (mode) { |
| case 's': |
| case 'h': |
| printk(KERN_CRIT "RESET: Rebooting system\n"); |
| |
| lpc32xx_watchdog_reset(); |
| break; |
| |
| default: |
| /* Do nothing */ |
| break; |
| } |
| |
| /* Wait for watchdog to reset system */ |
| while (1) |
| ; |
| } |