| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Intel Performance and Energy Bias Hint support. |
| * |
| * Copyright (C) 2019 Intel Corporation |
| * |
| * Author: |
| * Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
| */ |
| |
| #include <linux/cpuhotplug.h> |
| #include <linux/cpu.h> |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/syscore_ops.h> |
| #include <linux/pm.h> |
| |
| #include <asm/cpu_device_id.h> |
| #include <asm/cpufeature.h> |
| #include <asm/msr.h> |
| |
| /** |
| * DOC: overview |
| * |
| * The Performance and Energy Bias Hint (EPB) allows software to specify its |
| * preference with respect to the power-performance tradeoffs present in the |
| * processor. Generally, the EPB is expected to be set by user space (directly |
| * via sysfs or with the help of the x86_energy_perf_policy tool), but there are |
| * two reasons for the kernel to update it. |
| * |
| * First, there are systems where the platform firmware resets the EPB during |
| * system-wide transitions from sleep states back into the working state |
| * effectively causing the previous EPB updates by user space to be lost. |
| * Thus the kernel needs to save the current EPB values for all CPUs during |
| * system-wide transitions to sleep states and restore them on the way back to |
| * the working state. That can be achieved by saving EPB for secondary CPUs |
| * when they are taken offline during transitions into system sleep states and |
| * for the boot CPU in a syscore suspend operation, so that it can be restored |
| * for the boot CPU in a syscore resume operation and for the other CPUs when |
| * they are brought back online. However, CPUs that are already offline when |
| * a system-wide PM transition is started are not taken offline again, but their |
| * EPB values may still be reset by the platform firmware during the transition, |
| * so in fact it is necessary to save the EPB of any CPU taken offline and to |
| * restore it when the given CPU goes back online at all times. |
| * |
| * Second, on many systems the initial EPB value coming from the platform |
| * firmware is 0 ('performance') and at least on some of them that is because |
| * the platform firmware does not initialize EPB at all with the assumption that |
| * the OS will do that anyway. That sometimes is problematic, as it may cause |
| * the system battery to drain too fast, for example, so it is better to adjust |
| * it on CPU bring-up and if the initial EPB value for a given CPU is 0, the |
| * kernel changes it to 6 ('normal'). |
| */ |
| |
| static DEFINE_PER_CPU(u8, saved_epb); |
| |
| #define EPB_MASK 0x0fULL |
| #define EPB_SAVED 0x10ULL |
| #define MAX_EPB EPB_MASK |
| |
| enum energy_perf_value_index { |
| EPB_INDEX_PERFORMANCE, |
| EPB_INDEX_BALANCE_PERFORMANCE, |
| EPB_INDEX_NORMAL, |
| EPB_INDEX_BALANCE_POWERSAVE, |
| EPB_INDEX_POWERSAVE, |
| }; |
| |
| static u8 energ_perf_values[] = { |
| [EPB_INDEX_PERFORMANCE] = ENERGY_PERF_BIAS_PERFORMANCE, |
| [EPB_INDEX_BALANCE_PERFORMANCE] = ENERGY_PERF_BIAS_BALANCE_PERFORMANCE, |
| [EPB_INDEX_NORMAL] = ENERGY_PERF_BIAS_NORMAL, |
| [EPB_INDEX_BALANCE_POWERSAVE] = ENERGY_PERF_BIAS_BALANCE_POWERSAVE, |
| [EPB_INDEX_POWERSAVE] = ENERGY_PERF_BIAS_POWERSAVE, |
| }; |
| |
| static int intel_epb_save(void) |
| { |
| u64 epb; |
| |
| rdmsrl(MSR_IA32_ENERGY_PERF_BIAS, epb); |
| /* |
| * Ensure that saved_epb will always be nonzero after this write even if |
| * the EPB value read from the MSR is 0. |
| */ |
| this_cpu_write(saved_epb, (epb & EPB_MASK) | EPB_SAVED); |
| |
| return 0; |
| } |
| |
| static void intel_epb_restore(void) |
| { |
| u64 val = this_cpu_read(saved_epb); |
| u64 epb; |
| |
| rdmsrl(MSR_IA32_ENERGY_PERF_BIAS, epb); |
| if (val) { |
| val &= EPB_MASK; |
| } else { |
| /* |
| * Because intel_epb_save() has not run for the current CPU yet, |
| * it is going online for the first time, so if its EPB value is |
| * 0 ('performance') at this point, assume that it has not been |
| * initialized by the platform firmware and set it to 6 |
| * ('normal'). |
| */ |
| val = epb & EPB_MASK; |
| if (val == ENERGY_PERF_BIAS_PERFORMANCE) { |
| val = energ_perf_values[EPB_INDEX_NORMAL]; |
| pr_warn_once("ENERGY_PERF_BIAS: Set to 'normal', was 'performance'\n"); |
| } |
| } |
| wrmsrl(MSR_IA32_ENERGY_PERF_BIAS, (epb & ~EPB_MASK) | val); |
| } |
| |
| static struct syscore_ops intel_epb_syscore_ops = { |
| .suspend = intel_epb_save, |
| .resume = intel_epb_restore, |
| }; |
| |
| static const char * const energy_perf_strings[] = { |
| [EPB_INDEX_PERFORMANCE] = "performance", |
| [EPB_INDEX_BALANCE_PERFORMANCE] = "balance-performance", |
| [EPB_INDEX_NORMAL] = "normal", |
| [EPB_INDEX_BALANCE_POWERSAVE] = "balance-power", |
| [EPB_INDEX_POWERSAVE] = "power", |
| }; |
| |
| static ssize_t energy_perf_bias_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| unsigned int cpu = dev->id; |
| u64 epb; |
| int ret; |
| |
| ret = rdmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%llu\n", epb); |
| } |
| |
| static ssize_t energy_perf_bias_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| unsigned int cpu = dev->id; |
| u64 epb, val; |
| int ret; |
| |
| ret = __sysfs_match_string(energy_perf_strings, |
| ARRAY_SIZE(energy_perf_strings), buf); |
| if (ret >= 0) |
| val = energ_perf_values[ret]; |
| else if (kstrtou64(buf, 0, &val) || val > MAX_EPB) |
| return -EINVAL; |
| |
| ret = rdmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb); |
| if (ret < 0) |
| return ret; |
| |
| ret = wrmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, |
| (epb & ~EPB_MASK) | val); |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(energy_perf_bias); |
| |
| static struct attribute *intel_epb_attrs[] = { |
| &dev_attr_energy_perf_bias.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group intel_epb_attr_group = { |
| .name = power_group_name, |
| .attrs = intel_epb_attrs |
| }; |
| |
| static int intel_epb_online(unsigned int cpu) |
| { |
| struct device *cpu_dev = get_cpu_device(cpu); |
| |
| intel_epb_restore(); |
| if (!cpuhp_tasks_frozen) |
| sysfs_merge_group(&cpu_dev->kobj, &intel_epb_attr_group); |
| |
| return 0; |
| } |
| |
| static int intel_epb_offline(unsigned int cpu) |
| { |
| struct device *cpu_dev = get_cpu_device(cpu); |
| |
| if (!cpuhp_tasks_frozen) |
| sysfs_unmerge_group(&cpu_dev->kobj, &intel_epb_attr_group); |
| |
| intel_epb_save(); |
| return 0; |
| } |
| |
| static const struct x86_cpu_id intel_epb_normal[] = { |
| X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, |
| ENERGY_PERF_BIAS_NORMAL_POWERSAVE), |
| X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_N, |
| ENERGY_PERF_BIAS_NORMAL_POWERSAVE), |
| X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_P, |
| ENERGY_PERF_BIAS_NORMAL_POWERSAVE), |
| {} |
| }; |
| |
| static __init int intel_epb_init(void) |
| { |
| const struct x86_cpu_id *id = x86_match_cpu(intel_epb_normal); |
| int ret; |
| |
| if (!boot_cpu_has(X86_FEATURE_EPB)) |
| return -ENODEV; |
| |
| if (id) |
| energ_perf_values[EPB_INDEX_NORMAL] = id->driver_data; |
| |
| ret = cpuhp_setup_state(CPUHP_AP_X86_INTEL_EPB_ONLINE, |
| "x86/intel/epb:online", intel_epb_online, |
| intel_epb_offline); |
| if (ret < 0) |
| goto err_out_online; |
| |
| register_syscore_ops(&intel_epb_syscore_ops); |
| return 0; |
| |
| err_out_online: |
| cpuhp_remove_state(CPUHP_AP_X86_INTEL_EPB_ONLINE); |
| return ret; |
| } |
| subsys_initcall(intel_epb_init); |