|  | /* | 
|  | * Touch Screen driver for Renesas MIGO-R Platform | 
|  | * | 
|  | * Copyright (c) 2008 Magnus Damm | 
|  | * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>, | 
|  | *  Kenati Technologies Pvt Ltd. | 
|  | * | 
|  | * This file is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU  General Public | 
|  | * License as published by the Free Software Foundation; either | 
|  | * version 2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * This file is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | *  General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public | 
|  | * License along with this library; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/slab.h> | 
|  | #include <asm/io.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/timer.h> | 
|  |  | 
|  | #define EVENT_PENDOWN 1 | 
|  | #define EVENT_REPEAT  2 | 
|  | #define EVENT_PENUP   3 | 
|  |  | 
|  | struct migor_ts_priv { | 
|  | struct i2c_client *client; | 
|  | struct input_dev *input; | 
|  | int irq; | 
|  | }; | 
|  |  | 
|  | static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11, | 
|  | 0x01, 0x06, 0x07, }; | 
|  | static const u_int8_t migor_ts_dis_seq[17] = { }; | 
|  |  | 
|  | static irqreturn_t migor_ts_isr(int irq, void *dev_id) | 
|  | { | 
|  | struct migor_ts_priv *priv = dev_id; | 
|  | unsigned short xpos, ypos; | 
|  | unsigned char event; | 
|  | u_int8_t buf[16]; | 
|  |  | 
|  | /* | 
|  | * The touch screen controller chip is hooked up to the CPU | 
|  | * using I2C and a single interrupt line. The interrupt line | 
|  | * is pulled low whenever someone taps the screen. To deassert | 
|  | * the interrupt line we need to acknowledge the interrupt by | 
|  | * communicating with the controller over the slow i2c bus. | 
|  | * | 
|  | * Since I2C bus controller may sleep we are using threaded | 
|  | * IRQ here. | 
|  | */ | 
|  |  | 
|  | memset(buf, 0, sizeof(buf)); | 
|  |  | 
|  | /* Set Index 0 */ | 
|  | buf[0] = 0; | 
|  | if (i2c_master_send(priv->client, buf, 1) != 1) { | 
|  | dev_err(&priv->client->dev, "Unable to write i2c index\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Now do Page Read */ | 
|  | if (i2c_master_recv(priv->client, buf, sizeof(buf)) != sizeof(buf)) { | 
|  | dev_err(&priv->client->dev, "Unable to read i2c page\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ypos = ((buf[9] & 0x03) << 8 | buf[8]); | 
|  | xpos = ((buf[11] & 0x03) << 8 | buf[10]); | 
|  | event = buf[12]; | 
|  |  | 
|  | switch (event) { | 
|  | case EVENT_PENDOWN: | 
|  | case EVENT_REPEAT: | 
|  | input_report_key(priv->input, BTN_TOUCH, 1); | 
|  | input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/ | 
|  | input_report_abs(priv->input, ABS_Y, xpos); | 
|  | input_sync(priv->input); | 
|  | break; | 
|  |  | 
|  | case EVENT_PENUP: | 
|  | input_report_key(priv->input, BTN_TOUCH, 0); | 
|  | input_sync(priv->input); | 
|  | break; | 
|  | } | 
|  |  | 
|  | out: | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int migor_ts_open(struct input_dev *dev) | 
|  | { | 
|  | struct migor_ts_priv *priv = input_get_drvdata(dev); | 
|  | struct i2c_client *client = priv->client; | 
|  | int count; | 
|  |  | 
|  | /* enable controller */ | 
|  | count = i2c_master_send(client, migor_ts_ena_seq, | 
|  | sizeof(migor_ts_ena_seq)); | 
|  | if (count != sizeof(migor_ts_ena_seq)) { | 
|  | dev_err(&client->dev, "Unable to enable touchscreen.\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void migor_ts_close(struct input_dev *dev) | 
|  | { | 
|  | struct migor_ts_priv *priv = input_get_drvdata(dev); | 
|  | struct i2c_client *client = priv->client; | 
|  |  | 
|  | disable_irq(priv->irq); | 
|  |  | 
|  | /* disable controller */ | 
|  | i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq)); | 
|  |  | 
|  | enable_irq(priv->irq); | 
|  | } | 
|  |  | 
|  | static int migor_ts_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *idp) | 
|  | { | 
|  | struct migor_ts_priv *priv; | 
|  | struct input_dev *input; | 
|  | int error; | 
|  |  | 
|  | priv = kzalloc(sizeof(*priv), GFP_KERNEL); | 
|  | input = input_allocate_device(); | 
|  | if (!priv || !input) { | 
|  | dev_err(&client->dev, "failed to allocate memory\n"); | 
|  | error = -ENOMEM; | 
|  | goto err_free_mem; | 
|  | } | 
|  |  | 
|  | priv->client = client; | 
|  | priv->input = input; | 
|  | priv->irq = client->irq; | 
|  |  | 
|  | input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); | 
|  |  | 
|  | __set_bit(BTN_TOUCH, input->keybit); | 
|  |  | 
|  | input_set_abs_params(input, ABS_X, 95, 955, 0, 0); | 
|  | input_set_abs_params(input, ABS_Y, 85, 935, 0, 0); | 
|  |  | 
|  | input->name = client->name; | 
|  | input->id.bustype = BUS_I2C; | 
|  | input->dev.parent = &client->dev; | 
|  |  | 
|  | input->open = migor_ts_open; | 
|  | input->close = migor_ts_close; | 
|  |  | 
|  | input_set_drvdata(input, priv); | 
|  |  | 
|  | error = request_threaded_irq(priv->irq, NULL, migor_ts_isr, | 
|  | IRQF_TRIGGER_LOW | IRQF_ONESHOT, | 
|  | client->name, priv); | 
|  | if (error) { | 
|  | dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); | 
|  | goto err_free_mem; | 
|  | } | 
|  |  | 
|  | error = input_register_device(input); | 
|  | if (error) | 
|  | goto err_free_irq; | 
|  |  | 
|  | i2c_set_clientdata(client, priv); | 
|  | device_init_wakeup(&client->dev, 1); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free_irq: | 
|  | free_irq(priv->irq, priv); | 
|  | err_free_mem: | 
|  | input_free_device(input); | 
|  | kfree(priv); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int migor_ts_remove(struct i2c_client *client) | 
|  | { | 
|  | struct migor_ts_priv *priv = i2c_get_clientdata(client); | 
|  |  | 
|  | free_irq(priv->irq, priv); | 
|  | input_unregister_device(priv->input); | 
|  | kfree(priv); | 
|  |  | 
|  | dev_set_drvdata(&client->dev, NULL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int migor_ts_suspend(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct migor_ts_priv *priv = i2c_get_clientdata(client); | 
|  |  | 
|  | if (device_may_wakeup(&client->dev)) | 
|  | enable_irq_wake(priv->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int migor_ts_resume(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct migor_ts_priv *priv = i2c_get_clientdata(client); | 
|  |  | 
|  | if (device_may_wakeup(&client->dev)) | 
|  | disable_irq_wake(priv->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(migor_ts_pm, migor_ts_suspend, migor_ts_resume); | 
|  |  | 
|  | static const struct i2c_device_id migor_ts_id[] = { | 
|  | { "migor_ts", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, migor_ts); | 
|  |  | 
|  | static struct i2c_driver migor_ts_driver = { | 
|  | .driver = { | 
|  | .name = "migor_ts", | 
|  | .pm = &migor_ts_pm, | 
|  | }, | 
|  | .probe = migor_ts_probe, | 
|  | .remove = migor_ts_remove, | 
|  | .id_table = migor_ts_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(migor_ts_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("MigoR Touchscreen driver"); | 
|  | MODULE_AUTHOR("Magnus Damm <damm@opensource.se>"); | 
|  | MODULE_LICENSE("GPL"); |