| /* | |
| * ARM Ltd. Fast Models | |
| * | |
| * Versatile Express (VE) system model | |
| * Motherboard component | |
| * | |
| * VEMotherBoard.lisa | |
| */ | |
| motherboard { | |
| arm,v2m-memory-map = "rs1"; | |
| compatible = "arm,vexpress,v2m-p1", "simple-bus"; | |
| #address-cells = <2>; /* SMB chipselect number and offset */ | |
| #size-cells = <1>; | |
| #interrupt-cells = <1>; | |
| ranges; | |
| flash@0,00000000 { | |
| compatible = "arm,vexpress-flash", "cfi-flash"; | |
| reg = <0 0x00000000 0x04000000>, | |
| <4 0x00000000 0x04000000>; | |
| bank-width = <4>; | |
| }; | |
| v2m_video_ram: vram@2,00000000 { | |
| compatible = "arm,vexpress-vram"; | |
| reg = <2 0x00000000 0x00800000>; | |
| }; | |
| ethernet@2,02000000 { | |
| compatible = "smsc,lan91c111"; | |
| reg = <2 0x02000000 0x10000>; | |
| interrupts = <15>; | |
| }; | |
| v2m_clk24mhz: clk24mhz { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <24000000>; | |
| clock-output-names = "v2m:clk24mhz"; | |
| }; | |
| v2m_refclk1mhz: refclk1mhz { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <1000000>; | |
| clock-output-names = "v2m:refclk1mhz"; | |
| }; | |
| v2m_refclk32khz: refclk32khz { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <32768>; | |
| clock-output-names = "v2m:refclk32khz"; | |
| }; | |
| iofpga@3,00000000 { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0 3 0 0x200000>; | |
| v2m_sysreg: sysreg@010000 { | |
| compatible = "arm,vexpress-sysreg"; | |
| reg = <0x010000 0x1000>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| }; | |
| v2m_sysctl: sysctl@020000 { | |
| compatible = "arm,sp810", "arm,primecell"; | |
| reg = <0x020000 0x1000>; | |
| clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; | |
| clock-names = "refclk", "timclk", "apb_pclk"; | |
| #clock-cells = <1>; | |
| clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; | |
| assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; | |
| assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; | |
| }; | |
| aaci@040000 { | |
| compatible = "arm,pl041", "arm,primecell"; | |
| reg = <0x040000 0x1000>; | |
| interrupts = <11>; | |
| clocks = <&v2m_clk24mhz>; | |
| clock-names = "apb_pclk"; | |
| }; | |
| mmci@050000 { | |
| compatible = "arm,pl180", "arm,primecell"; | |
| reg = <0x050000 0x1000>; | |
| interrupts = <9 10>; | |
| cd-gpios = <&v2m_sysreg 0 0>; | |
| wp-gpios = <&v2m_sysreg 1 0>; | |
| max-frequency = <12000000>; | |
| vmmc-supply = <&v2m_fixed_3v3>; | |
| clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
| clock-names = "mclk", "apb_pclk"; | |
| }; | |
| kmi@060000 { | |
| compatible = "arm,pl050", "arm,primecell"; | |
| reg = <0x060000 0x1000>; | |
| interrupts = <12>; | |
| clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
| clock-names = "KMIREFCLK", "apb_pclk"; | |
| }; | |
| kmi@070000 { | |
| compatible = "arm,pl050", "arm,primecell"; | |
| reg = <0x070000 0x1000>; | |
| interrupts = <13>; | |
| clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
| clock-names = "KMIREFCLK", "apb_pclk"; | |
| }; | |
| v2m_serial0: uart@090000 { | |
| compatible = "arm,pl011", "arm,primecell"; | |
| reg = <0x090000 0x1000>; | |
| interrupts = <5>; | |
| clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
| clock-names = "uartclk", "apb_pclk"; | |
| }; | |
| v2m_serial1: uart@0a0000 { | |
| compatible = "arm,pl011", "arm,primecell"; | |
| reg = <0x0a0000 0x1000>; | |
| interrupts = <6>; | |
| clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
| clock-names = "uartclk", "apb_pclk"; | |
| }; | |
| v2m_serial2: uart@0b0000 { | |
| compatible = "arm,pl011", "arm,primecell"; | |
| reg = <0x0b0000 0x1000>; | |
| interrupts = <7>; | |
| clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
| clock-names = "uartclk", "apb_pclk"; | |
| }; | |
| v2m_serial3: uart@0c0000 { | |
| compatible = "arm,pl011", "arm,primecell"; | |
| reg = <0x0c0000 0x1000>; | |
| interrupts = <8>; | |
| clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
| clock-names = "uartclk", "apb_pclk"; | |
| }; | |
| wdt@0f0000 { | |
| compatible = "arm,sp805", "arm,primecell"; | |
| reg = <0x0f0000 0x1000>; | |
| interrupts = <0>; | |
| clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; | |
| clock-names = "wdogclk", "apb_pclk"; | |
| }; | |
| v2m_timer01: timer@110000 { | |
| compatible = "arm,sp804", "arm,primecell"; | |
| reg = <0x110000 0x1000>; | |
| interrupts = <2>; | |
| clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; | |
| clock-names = "timclken1", "timclken2", "apb_pclk"; | |
| }; | |
| v2m_timer23: timer@120000 { | |
| compatible = "arm,sp804", "arm,primecell"; | |
| reg = <0x120000 0x1000>; | |
| interrupts = <3>; | |
| clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; | |
| clock-names = "timclken1", "timclken2", "apb_pclk"; | |
| }; | |
| rtc@170000 { | |
| compatible = "arm,pl031", "arm,primecell"; | |
| reg = <0x170000 0x1000>; | |
| interrupts = <4>; | |
| clocks = <&v2m_clk24mhz>; | |
| clock-names = "apb_pclk"; | |
| }; | |
| clcd@1f0000 { | |
| compatible = "arm,pl111", "arm,primecell"; | |
| reg = <0x1f0000 0x1000>; | |
| interrupt-names = "combined"; | |
| interrupts = <14>; | |
| clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; | |
| clock-names = "clcdclk", "apb_pclk"; | |
| arm,pl11x,framebuffer = <0x18000000 0x00180000>; | |
| memory-region = <&v2m_video_ram>; | |
| max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ | |
| port { | |
| v2m_clcd_pads: endpoint { | |
| remote-endpoint = <&v2m_clcd_panel>; | |
| arm,pl11x,tft-r0g0b0-pads = <0 8 16>; | |
| }; | |
| }; | |
| panel { | |
| compatible = "panel-dpi"; | |
| port { | |
| v2m_clcd_panel: endpoint { | |
| remote-endpoint = <&v2m_clcd_pads>; | |
| }; | |
| }; | |
| panel-timing { | |
| clock-frequency = <63500127>; | |
| hactive = <1024>; | |
| hback-porch = <152>; | |
| hfront-porch = <48>; | |
| hsync-len = <104>; | |
| vactive = <768>; | |
| vback-porch = <23>; | |
| vfront-porch = <3>; | |
| vsync-len = <4>; | |
| }; | |
| }; | |
| }; | |
| virtio-block@0130000 { | |
| compatible = "virtio,mmio"; | |
| reg = <0x130000 0x200>; | |
| interrupts = <42>; | |
| }; | |
| }; | |
| v2m_fixed_3v3: v2m-3v3 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "3V3"; | |
| regulator-min-microvolt = <3300000>; | |
| regulator-max-microvolt = <3300000>; | |
| regulator-always-on; | |
| }; | |
| mcc { | |
| compatible = "arm,vexpress,config-bus"; | |
| arm,vexpress,config-bridge = <&v2m_sysreg>; | |
| v2m_oscclk1: oscclk1 { | |
| /* CLCD clock */ | |
| compatible = "arm,vexpress-osc"; | |
| arm,vexpress-sysreg,func = <1 1>; | |
| freq-range = <23750000 63500000>; | |
| #clock-cells = <0>; | |
| clock-output-names = "v2m:oscclk1"; | |
| }; | |
| reset { | |
| compatible = "arm,vexpress-reset"; | |
| arm,vexpress-sysreg,func = <5 0>; | |
| }; | |
| muxfpga { | |
| compatible = "arm,vexpress-muxfpga"; | |
| arm,vexpress-sysreg,func = <7 0>; | |
| }; | |
| shutdown { | |
| compatible = "arm,vexpress-shutdown"; | |
| arm,vexpress-sysreg,func = <8 0>; | |
| }; | |
| reboot { | |
| compatible = "arm,vexpress-reboot"; | |
| arm,vexpress-sysreg,func = <9 0>; | |
| }; | |
| dvimode { | |
| compatible = "arm,vexpress-dvimode"; | |
| arm,vexpress-sysreg,func = <11 0>; | |
| }; | |
| }; | |
| }; |