| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * pwm-fan.c - Hwmon driver for fans connected to PWM lines. |
| * |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| * |
| * Author: Kamil Debski <k.debski@samsung.com> |
| */ |
| |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/sysfs.h> |
| #include <linux/thermal.h> |
| #include <linux/timer.h> |
| |
| #define MAX_PWM 255 |
| |
| struct pwm_fan_ctx { |
| struct mutex lock; |
| struct pwm_device *pwm; |
| struct regulator *reg_en; |
| |
| int irq; |
| atomic_t pulses; |
| unsigned int rpm; |
| u8 pulses_per_revolution; |
| ktime_t sample_start; |
| struct timer_list rpm_timer; |
| |
| unsigned int pwm_value; |
| unsigned int pwm_fan_state; |
| unsigned int pwm_fan_max_state; |
| unsigned int *pwm_fan_cooling_levels; |
| struct thermal_cooling_device *cdev; |
| }; |
| |
| /* This handler assumes self resetting edge triggered interrupt. */ |
| static irqreturn_t pulse_handler(int irq, void *dev_id) |
| { |
| struct pwm_fan_ctx *ctx = dev_id; |
| |
| atomic_inc(&ctx->pulses); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void sample_timer(struct timer_list *t) |
| { |
| struct pwm_fan_ctx *ctx = from_timer(ctx, t, rpm_timer); |
| int pulses; |
| u64 tmp; |
| |
| pulses = atomic_read(&ctx->pulses); |
| atomic_sub(pulses, &ctx->pulses); |
| tmp = (u64)pulses * ktime_ms_delta(ktime_get(), ctx->sample_start) * 60; |
| do_div(tmp, ctx->pulses_per_revolution * 1000); |
| ctx->rpm = tmp; |
| |
| ctx->sample_start = ktime_get(); |
| mod_timer(&ctx->rpm_timer, jiffies + HZ); |
| } |
| |
| static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm) |
| { |
| unsigned long period; |
| int ret = 0; |
| struct pwm_state state = { }; |
| |
| mutex_lock(&ctx->lock); |
| if (ctx->pwm_value == pwm) |
| goto exit_set_pwm_err; |
| |
| pwm_init_state(ctx->pwm, &state); |
| period = ctx->pwm->args.period; |
| state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM); |
| state.enabled = pwm ? true : false; |
| |
| ret = pwm_apply_state(ctx->pwm, &state); |
| if (!ret) |
| ctx->pwm_value = pwm; |
| exit_set_pwm_err: |
| mutex_unlock(&ctx->lock); |
| return ret; |
| } |
| |
| static void pwm_fan_update_state(struct pwm_fan_ctx *ctx, unsigned long pwm) |
| { |
| int i; |
| |
| for (i = 0; i < ctx->pwm_fan_max_state; ++i) |
| if (pwm < ctx->pwm_fan_cooling_levels[i + 1]) |
| break; |
| |
| ctx->pwm_fan_state = i; |
| } |
| |
| static ssize_t pwm_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); |
| unsigned long pwm; |
| int ret; |
| |
| if (kstrtoul(buf, 10, &pwm) || pwm > MAX_PWM) |
| return -EINVAL; |
| |
| ret = __set_pwm(ctx, pwm); |
| if (ret) |
| return ret; |
| |
| pwm_fan_update_state(ctx, pwm); |
| return count; |
| } |
| |
| static ssize_t pwm_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%u\n", ctx->pwm_value); |
| } |
| |
| static ssize_t rpm_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%u\n", ctx->rpm); |
| } |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); |
| static SENSOR_DEVICE_ATTR_RO(fan1_input, rpm, 0); |
| |
| static struct attribute *pwm_fan_attrs[] = { |
| &sensor_dev_attr_pwm1.dev_attr.attr, |
| &sensor_dev_attr_fan1_input.dev_attr.attr, |
| NULL, |
| }; |
| |
| static umode_t pwm_fan_attrs_visible(struct kobject *kobj, struct attribute *a, |
| int n) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); |
| |
| /* Hide fan_input in case no interrupt is available */ |
| if (n == 1 && ctx->irq <= 0) |
| return 0; |
| |
| return a->mode; |
| } |
| |
| static const struct attribute_group pwm_fan_group = { |
| .attrs = pwm_fan_attrs, |
| .is_visible = pwm_fan_attrs_visible, |
| }; |
| |
| static const struct attribute_group *pwm_fan_groups[] = { |
| &pwm_fan_group, |
| NULL, |
| }; |
| |
| /* thermal cooling device callbacks */ |
| static int pwm_fan_get_max_state(struct thermal_cooling_device *cdev, |
| unsigned long *state) |
| { |
| struct pwm_fan_ctx *ctx = cdev->devdata; |
| |
| if (!ctx) |
| return -EINVAL; |
| |
| *state = ctx->pwm_fan_max_state; |
| |
| return 0; |
| } |
| |
| static int pwm_fan_get_cur_state(struct thermal_cooling_device *cdev, |
| unsigned long *state) |
| { |
| struct pwm_fan_ctx *ctx = cdev->devdata; |
| |
| if (!ctx) |
| return -EINVAL; |
| |
| *state = ctx->pwm_fan_state; |
| |
| return 0; |
| } |
| |
| static int |
| pwm_fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) |
| { |
| struct pwm_fan_ctx *ctx = cdev->devdata; |
| int ret; |
| |
| if (!ctx || (state > ctx->pwm_fan_max_state)) |
| return -EINVAL; |
| |
| if (state == ctx->pwm_fan_state) |
| return 0; |
| |
| ret = __set_pwm(ctx, ctx->pwm_fan_cooling_levels[state]); |
| if (ret) { |
| dev_err(&cdev->device, "Cannot set pwm!\n"); |
| return ret; |
| } |
| |
| ctx->pwm_fan_state = state; |
| |
| return ret; |
| } |
| |
| static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = { |
| .get_max_state = pwm_fan_get_max_state, |
| .get_cur_state = pwm_fan_get_cur_state, |
| .set_cur_state = pwm_fan_set_cur_state, |
| }; |
| |
| static int pwm_fan_of_get_cooling_data(struct device *dev, |
| struct pwm_fan_ctx *ctx) |
| { |
| struct device_node *np = dev->of_node; |
| int num, i, ret; |
| |
| if (!of_find_property(np, "cooling-levels", NULL)) |
| return 0; |
| |
| ret = of_property_count_u32_elems(np, "cooling-levels"); |
| if (ret <= 0) { |
| dev_err(dev, "Wrong data!\n"); |
| return ret ? : -EINVAL; |
| } |
| |
| num = ret; |
| ctx->pwm_fan_cooling_levels = devm_kcalloc(dev, num, sizeof(u32), |
| GFP_KERNEL); |
| if (!ctx->pwm_fan_cooling_levels) |
| return -ENOMEM; |
| |
| ret = of_property_read_u32_array(np, "cooling-levels", |
| ctx->pwm_fan_cooling_levels, num); |
| if (ret) { |
| dev_err(dev, "Property 'cooling-levels' cannot be read!\n"); |
| return ret; |
| } |
| |
| for (i = 0; i < num; i++) { |
| if (ctx->pwm_fan_cooling_levels[i] > MAX_PWM) { |
| dev_err(dev, "PWM fan state[%d]:%d > %d\n", i, |
| ctx->pwm_fan_cooling_levels[i], MAX_PWM); |
| return -EINVAL; |
| } |
| } |
| |
| ctx->pwm_fan_max_state = num - 1; |
| |
| return 0; |
| } |
| |
| static void pwm_fan_regulator_disable(void *data) |
| { |
| regulator_disable(data); |
| } |
| |
| static void pwm_fan_pwm_disable(void *__ctx) |
| { |
| struct pwm_fan_ctx *ctx = __ctx; |
| pwm_disable(ctx->pwm); |
| del_timer_sync(&ctx->rpm_timer); |
| } |
| |
| static int pwm_fan_probe(struct platform_device *pdev) |
| { |
| struct thermal_cooling_device *cdev; |
| struct device *dev = &pdev->dev; |
| struct pwm_fan_ctx *ctx; |
| struct device *hwmon; |
| int ret; |
| struct pwm_state state = { }; |
| u32 ppr = 2; |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| mutex_init(&ctx->lock); |
| |
| ctx->pwm = devm_of_pwm_get(dev, dev->of_node, NULL); |
| if (IS_ERR(ctx->pwm)) |
| return dev_err_probe(dev, PTR_ERR(ctx->pwm), "Could not get PWM\n"); |
| |
| platform_set_drvdata(pdev, ctx); |
| |
| ctx->irq = platform_get_irq_optional(pdev, 0); |
| if (ctx->irq == -EPROBE_DEFER) |
| return ctx->irq; |
| |
| ctx->reg_en = devm_regulator_get_optional(dev, "fan"); |
| if (IS_ERR(ctx->reg_en)) { |
| if (PTR_ERR(ctx->reg_en) != -ENODEV) |
| return PTR_ERR(ctx->reg_en); |
| |
| ctx->reg_en = NULL; |
| } else { |
| ret = regulator_enable(ctx->reg_en); |
| if (ret) { |
| dev_err(dev, "Failed to enable fan supply: %d\n", ret); |
| return ret; |
| } |
| ret = devm_add_action_or_reset(dev, pwm_fan_regulator_disable, |
| ctx->reg_en); |
| if (ret) |
| return ret; |
| } |
| |
| ctx->pwm_value = MAX_PWM; |
| |
| /* Set duty cycle to maximum allowed and enable PWM output */ |
| pwm_init_state(ctx->pwm, &state); |
| state.duty_cycle = ctx->pwm->args.period - 1; |
| state.enabled = true; |
| |
| ret = pwm_apply_state(ctx->pwm, &state); |
| if (ret) { |
| dev_err(dev, "Failed to configure PWM: %d\n", ret); |
| return ret; |
| } |
| timer_setup(&ctx->rpm_timer, sample_timer, 0); |
| ret = devm_add_action_or_reset(dev, pwm_fan_pwm_disable, ctx); |
| if (ret) |
| return ret; |
| |
| of_property_read_u32(dev->of_node, "pulses-per-revolution", &ppr); |
| ctx->pulses_per_revolution = ppr; |
| if (!ctx->pulses_per_revolution) { |
| dev_err(dev, "pulses-per-revolution can't be zero.\n"); |
| return -EINVAL; |
| } |
| |
| if (ctx->irq > 0) { |
| ret = devm_request_irq(dev, ctx->irq, pulse_handler, 0, |
| pdev->name, ctx); |
| if (ret) { |
| dev_err(dev, "Failed to request interrupt: %d\n", ret); |
| return ret; |
| } |
| ctx->sample_start = ktime_get(); |
| mod_timer(&ctx->rpm_timer, jiffies + HZ); |
| } |
| |
| hwmon = devm_hwmon_device_register_with_groups(dev, "pwmfan", |
| ctx, pwm_fan_groups); |
| if (IS_ERR(hwmon)) { |
| dev_err(dev, "Failed to register hwmon device\n"); |
| return PTR_ERR(hwmon); |
| } |
| |
| ret = pwm_fan_of_get_cooling_data(dev, ctx); |
| if (ret) |
| return ret; |
| |
| ctx->pwm_fan_state = ctx->pwm_fan_max_state; |
| if (IS_ENABLED(CONFIG_THERMAL)) { |
| cdev = devm_thermal_of_cooling_device_register(dev, |
| dev->of_node, "pwm-fan", ctx, &pwm_fan_cooling_ops); |
| if (IS_ERR(cdev)) { |
| ret = PTR_ERR(cdev); |
| dev_err(dev, |
| "Failed to register pwm-fan as cooling device: %d\n", |
| ret); |
| return ret; |
| } |
| ctx->cdev = cdev; |
| thermal_cdev_update(cdev); |
| } |
| |
| return 0; |
| } |
| |
| static int pwm_fan_disable(struct device *dev) |
| { |
| struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); |
| struct pwm_args args; |
| int ret; |
| |
| pwm_get_args(ctx->pwm, &args); |
| |
| if (ctx->pwm_value) { |
| ret = pwm_config(ctx->pwm, 0, args.period); |
| if (ret < 0) |
| return ret; |
| |
| pwm_disable(ctx->pwm); |
| } |
| |
| if (ctx->reg_en) { |
| ret = regulator_disable(ctx->reg_en); |
| if (ret) { |
| dev_err(dev, "Failed to disable fan supply: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void pwm_fan_shutdown(struct platform_device *pdev) |
| { |
| pwm_fan_disable(&pdev->dev); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int pwm_fan_suspend(struct device *dev) |
| { |
| return pwm_fan_disable(dev); |
| } |
| |
| static int pwm_fan_resume(struct device *dev) |
| { |
| struct pwm_fan_ctx *ctx = dev_get_drvdata(dev); |
| struct pwm_args pargs; |
| unsigned long duty; |
| int ret; |
| |
| if (ctx->reg_en) { |
| ret = regulator_enable(ctx->reg_en); |
| if (ret) { |
| dev_err(dev, "Failed to enable fan supply: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| if (ctx->pwm_value == 0) |
| return 0; |
| |
| pwm_get_args(ctx->pwm, &pargs); |
| duty = DIV_ROUND_UP_ULL(ctx->pwm_value * (pargs.period - 1), MAX_PWM); |
| ret = pwm_config(ctx->pwm, duty, pargs.period); |
| if (ret) |
| return ret; |
| return pwm_enable(ctx->pwm); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(pwm_fan_pm, pwm_fan_suspend, pwm_fan_resume); |
| |
| static const struct of_device_id of_pwm_fan_match[] = { |
| { .compatible = "pwm-fan", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_pwm_fan_match); |
| |
| static struct platform_driver pwm_fan_driver = { |
| .probe = pwm_fan_probe, |
| .shutdown = pwm_fan_shutdown, |
| .driver = { |
| .name = "pwm-fan", |
| .pm = &pwm_fan_pm, |
| .of_match_table = of_pwm_fan_match, |
| }, |
| }; |
| |
| module_platform_driver(pwm_fan_driver); |
| |
| MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); |
| MODULE_ALIAS("platform:pwm-fan"); |
| MODULE_DESCRIPTION("PWM FAN driver"); |
| MODULE_LICENSE("GPL"); |