| /* | 
 |  *    Copyright 2017 NXP | 
 |  * | 
 |  *    This program is free software; you can redistribute it and/or modify | 
 |  *    it under the terms of the GNU General Public License as published by | 
 |  *    the Free Software Foundation; either version 2 of the License, or | 
 |  *    (at your option) any later version. | 
 |  * | 
 |  *    This program is distributed in the hope that it will be useful, | 
 |  *    but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *    GNU General Public License for more details. | 
 |  * | 
 |  *    CORTINA is a registered trademark of Cortina Systems, Inc. | 
 |  * | 
 |  */ | 
 | #include <linux/module.h> | 
 | #include <linux/phy.h> | 
 |  | 
 | #define PHY_ID_CS4340	0x13e51002 | 
 |  | 
 | #define VILLA_GLOBAL_CHIP_ID_LSB			0x0 | 
 | #define VILLA_GLOBAL_CHIP_ID_MSB			0x1 | 
 |  | 
 | #define VILLA_GLOBAL_GPIO_1_INTS			0x017 | 
 |  | 
 | static int cortina_read_reg(struct phy_device *phydev, u16 regnum) | 
 | { | 
 | 	return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, | 
 | 			    MII_ADDR_C45 | regnum); | 
 | } | 
 |  | 
 | static int cortina_read_status(struct phy_device *phydev) | 
 | { | 
 | 	int gpio_int_status, ret = 0; | 
 |  | 
 | 	gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS); | 
 | 	if (gpio_int_status < 0) { | 
 | 		ret = gpio_int_status; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	if (gpio_int_status & 0x8) { | 
 | 		/* up when edc_convergedS set */ | 
 | 		phydev->speed = SPEED_10000; | 
 | 		phydev->duplex = DUPLEX_FULL; | 
 | 		phydev->link = 1; | 
 | 	} else { | 
 | 		phydev->link = 0; | 
 | 	} | 
 |  | 
 | err: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int cortina_probe(struct phy_device *phydev) | 
 | { | 
 | 	u32 phy_id = 0; | 
 | 	int id_lsb = 0, id_msb = 0; | 
 |  | 
 | 	/* Read device id from phy registers. */ | 
 | 	id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB); | 
 | 	if (id_lsb < 0) | 
 | 		return -ENXIO; | 
 |  | 
 | 	phy_id = id_lsb << 16; | 
 |  | 
 | 	id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB); | 
 | 	if (id_msb < 0) | 
 | 		return -ENXIO; | 
 |  | 
 | 	phy_id |= id_msb; | 
 |  | 
 | 	/* Make sure the device tree binding matched the driver with the | 
 | 	 * right device. | 
 | 	 */ | 
 | 	if (phy_id != phydev->drv->phy_id) { | 
 | 		phydev_err(phydev, "Error matching phy with %s driver\n", | 
 | 			   phydev->drv->name); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct phy_driver cortina_driver[] = { | 
 | { | 
 | 	.phy_id		= PHY_ID_CS4340, | 
 | 	.phy_id_mask	= 0xffffffff, | 
 | 	.name		= "Cortina CS4340", | 
 | 	.config_init	= gen10g_config_init, | 
 | 	.config_aneg	= gen10g_config_aneg, | 
 | 	.read_status	= cortina_read_status, | 
 | 	.soft_reset	= gen10g_no_soft_reset, | 
 | 	.probe		= cortina_probe, | 
 | }, | 
 | }; | 
 |  | 
 | module_phy_driver(cortina_driver); | 
 |  | 
 | static struct mdio_device_id __maybe_unused cortina_tbl[] = { | 
 | 	{ PHY_ID_CS4340, 0xffffffff}, | 
 | 	{}, | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(mdio, cortina_tbl); | 
 |  | 
 | MODULE_DESCRIPTION("Cortina EDC CDR 10G Ethernet PHY driver"); | 
 | MODULE_AUTHOR("NXP"); | 
 | MODULE_LICENSE("GPL"); |