| /* |
| * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include "phy-qcom-ufs-i.h" |
| |
| #define MAX_PROP_NAME 32 |
| #define VDDA_PHY_MIN_UV 1000000 |
| #define VDDA_PHY_MAX_UV 1000000 |
| #define VDDA_PLL_MIN_UV 1800000 |
| #define VDDA_PLL_MAX_UV 1800000 |
| #define VDDP_REF_CLK_MIN_UV 1200000 |
| #define VDDP_REF_CLK_MAX_UV 1200000 |
| |
| int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, |
| struct ufs_qcom_phy_calibration *tbl_A, |
| int tbl_size_A, |
| struct ufs_qcom_phy_calibration *tbl_B, |
| int tbl_size_B, bool is_rate_B) |
| { |
| int i; |
| int ret = 0; |
| |
| if (!tbl_A) { |
| dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__); |
| ret = EINVAL; |
| goto out; |
| } |
| |
| for (i = 0; i < tbl_size_A; i++) |
| writel_relaxed(tbl_A[i].cfg_value, |
| ufs_qcom_phy->mmio + tbl_A[i].reg_offset); |
| |
| /* |
| * In case we would like to work in rate B, we need |
| * to override a registers that were configured in rate A table |
| * with registers of rate B table. |
| * table. |
| */ |
| if (is_rate_B) { |
| if (!tbl_B) { |
| dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL", |
| __func__); |
| ret = EINVAL; |
| goto out; |
| } |
| |
| for (i = 0; i < tbl_size_B; i++) |
| writel_relaxed(tbl_B[i].cfg_value, |
| ufs_qcom_phy->mmio + tbl_B[i].reg_offset); |
| } |
| |
| /* flush buffered writes */ |
| mb(); |
| |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate); |
| |
| /* |
| * This assumes the embedded phy structure inside generic_phy is of type |
| * struct ufs_qcom_phy. In order to function properly it's crucial |
| * to keep the embedded struct "struct ufs_qcom_phy common_cfg" |
| * as the first inside generic_phy. |
| */ |
| struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy) |
| { |
| return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy); |
| } |
| EXPORT_SYMBOL_GPL(get_ufs_qcom_phy); |
| |
| static |
| int ufs_qcom_phy_base_init(struct platform_device *pdev, |
| struct ufs_qcom_phy *phy_common) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| int err = 0; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem"); |
| phy_common->mmio = devm_ioremap_resource(dev, res); |
| if (IS_ERR((void const *)phy_common->mmio)) { |
| err = PTR_ERR((void const *)phy_common->mmio); |
| phy_common->mmio = NULL; |
| dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n", |
| __func__, err); |
| return err; |
| } |
| |
| /* "dev_ref_clk_ctrl_mem" is optional resource */ |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "dev_ref_clk_ctrl_mem"); |
| phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res); |
| if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) |
| phy_common->dev_ref_clk_ctrl_mmio = NULL; |
| |
| return 0; |
| } |
| |
| struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, |
| struct ufs_qcom_phy *common_cfg, |
| const struct phy_ops *ufs_qcom_phy_gen_ops, |
| struct ufs_qcom_phy_specific_ops *phy_spec_ops) |
| { |
| int err; |
| struct device *dev = &pdev->dev; |
| struct phy *generic_phy = NULL; |
| struct phy_provider *phy_provider; |
| |
| err = ufs_qcom_phy_base_init(pdev, common_cfg); |
| if (err) { |
| dev_err(dev, "%s: phy base init failed %d\n", __func__, err); |
| goto out; |
| } |
| |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| if (IS_ERR(phy_provider)) { |
| err = PTR_ERR(phy_provider); |
| dev_err(dev, "%s: failed to register phy %d\n", __func__, err); |
| goto out; |
| } |
| |
| generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops); |
| if (IS_ERR(generic_phy)) { |
| err = PTR_ERR(generic_phy); |
| dev_err(dev, "%s: failed to create phy %d\n", __func__, err); |
| generic_phy = NULL; |
| goto out; |
| } |
| |
| common_cfg->phy_spec_ops = phy_spec_ops; |
| common_cfg->dev = dev; |
| |
| out: |
| return generic_phy; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe); |
| |
| static int ufs_qcom_phy_get_reset(struct ufs_qcom_phy *phy_common) |
| { |
| struct reset_control *reset; |
| |
| if (phy_common->ufs_reset) |
| return 0; |
| |
| reset = devm_reset_control_get_exclusive_by_index(phy_common->dev, 0); |
| if (IS_ERR(reset)) |
| return PTR_ERR(reset); |
| |
| phy_common->ufs_reset = reset; |
| return 0; |
| } |
| |
| static int __ufs_qcom_phy_clk_get(struct device *dev, |
| const char *name, struct clk **clk_out, bool err_print) |
| { |
| struct clk *clk; |
| int err = 0; |
| |
| clk = devm_clk_get(dev, name); |
| if (IS_ERR(clk)) { |
| err = PTR_ERR(clk); |
| if (err_print) |
| dev_err(dev, "failed to get %s err %d", name, err); |
| } else { |
| *clk_out = clk; |
| } |
| |
| return err; |
| } |
| |
| static int ufs_qcom_phy_clk_get(struct device *dev, |
| const char *name, struct clk **clk_out) |
| { |
| return __ufs_qcom_phy_clk_get(dev, name, clk_out, true); |
| } |
| |
| int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common) |
| { |
| int err; |
| |
| if (of_device_is_compatible(phy_common->dev->of_node, |
| "qcom,msm8996-ufs-phy-qmp-14nm")) |
| goto skip_txrx_clk; |
| |
| err = ufs_qcom_phy_clk_get(phy_common->dev, "tx_iface_clk", |
| &phy_common->tx_iface_clk); |
| if (err) |
| goto out; |
| |
| err = ufs_qcom_phy_clk_get(phy_common->dev, "rx_iface_clk", |
| &phy_common->rx_iface_clk); |
| if (err) |
| goto out; |
| |
| skip_txrx_clk: |
| err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_src", |
| &phy_common->ref_clk_src); |
| if (err) |
| goto out; |
| |
| /* |
| * "ref_clk_parent" is optional hence don't abort init if it's not |
| * found. |
| */ |
| __ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_parent", |
| &phy_common->ref_clk_parent, false); |
| |
| err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk", |
| &phy_common->ref_clk); |
| |
| out: |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks); |
| |
| static int ufs_qcom_phy_init_vreg(struct device *dev, |
| struct ufs_qcom_phy_vreg *vreg, |
| const char *name) |
| { |
| int err = 0; |
| |
| char prop_name[MAX_PROP_NAME]; |
| |
| vreg->name = name; |
| vreg->reg = devm_regulator_get(dev, name); |
| if (IS_ERR(vreg->reg)) { |
| err = PTR_ERR(vreg->reg); |
| dev_err(dev, "failed to get %s, %d\n", name, err); |
| goto out; |
| } |
| |
| if (dev->of_node) { |
| snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name); |
| err = of_property_read_u32(dev->of_node, |
| prop_name, &vreg->max_uA); |
| if (err && err != -EINVAL) { |
| dev_err(dev, "%s: failed to read %s\n", |
| __func__, prop_name); |
| goto out; |
| } else if (err == -EINVAL || !vreg->max_uA) { |
| if (regulator_count_voltages(vreg->reg) > 0) { |
| dev_err(dev, "%s: %s is mandatory\n", |
| __func__, prop_name); |
| goto out; |
| } |
| err = 0; |
| } |
| } |
| |
| if (!strcmp(name, "vdda-pll")) { |
| vreg->max_uV = VDDA_PLL_MAX_UV; |
| vreg->min_uV = VDDA_PLL_MIN_UV; |
| } else if (!strcmp(name, "vdda-phy")) { |
| vreg->max_uV = VDDA_PHY_MAX_UV; |
| vreg->min_uV = VDDA_PHY_MIN_UV; |
| } else if (!strcmp(name, "vddp-ref-clk")) { |
| vreg->max_uV = VDDP_REF_CLK_MAX_UV; |
| vreg->min_uV = VDDP_REF_CLK_MIN_UV; |
| } |
| |
| out: |
| return err; |
| } |
| |
| int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common) |
| { |
| int err; |
| |
| err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_pll, |
| "vdda-pll"); |
| if (err) |
| goto out; |
| |
| err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_phy, |
| "vdda-phy"); |
| |
| if (err) |
| goto out; |
| |
| err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vddp_ref_clk, |
| "vddp-ref-clk"); |
| |
| out: |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators); |
| |
| static int ufs_qcom_phy_cfg_vreg(struct device *dev, |
| struct ufs_qcom_phy_vreg *vreg, bool on) |
| { |
| int ret = 0; |
| struct regulator *reg = vreg->reg; |
| const char *name = vreg->name; |
| int min_uV; |
| int uA_load; |
| |
| if (regulator_count_voltages(reg) > 0) { |
| min_uV = on ? vreg->min_uV : 0; |
| ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); |
| if (ret) { |
| dev_err(dev, "%s: %s set voltage failed, err=%d\n", |
| __func__, name, ret); |
| goto out; |
| } |
| uA_load = on ? vreg->max_uA : 0; |
| ret = regulator_set_load(reg, uA_load); |
| if (ret >= 0) { |
| /* |
| * regulator_set_load() returns new regulator |
| * mode upon success. |
| */ |
| ret = 0; |
| } else { |
| dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", |
| __func__, name, uA_load, ret); |
| goto out; |
| } |
| } |
| out: |
| return ret; |
| } |
| |
| static int ufs_qcom_phy_enable_vreg(struct device *dev, |
| struct ufs_qcom_phy_vreg *vreg) |
| { |
| int ret = 0; |
| |
| if (!vreg || vreg->enabled) |
| goto out; |
| |
| ret = ufs_qcom_phy_cfg_vreg(dev, vreg, true); |
| if (ret) { |
| dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| ret = regulator_enable(vreg->reg); |
| if (ret) { |
| dev_err(dev, "%s: enable failed, err=%d\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| vreg->enabled = true; |
| out: |
| return ret; |
| } |
| |
| static int ufs_qcom_phy_enable_ref_clk(struct ufs_qcom_phy *phy) |
| { |
| int ret = 0; |
| |
| if (phy->is_ref_clk_enabled) |
| goto out; |
| |
| /* |
| * reference clock is propagated in a daisy-chained manner from |
| * source to phy, so ungate them at each stage. |
| */ |
| ret = clk_prepare_enable(phy->ref_clk_src); |
| if (ret) { |
| dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| /* |
| * "ref_clk_parent" is optional clock hence make sure that clk reference |
| * is available before trying to enable the clock. |
| */ |
| if (phy->ref_clk_parent) { |
| ret = clk_prepare_enable(phy->ref_clk_parent); |
| if (ret) { |
| dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n", |
| __func__, ret); |
| goto out_disable_src; |
| } |
| } |
| |
| ret = clk_prepare_enable(phy->ref_clk); |
| if (ret) { |
| dev_err(phy->dev, "%s: ref_clk enable failed %d\n", |
| __func__, ret); |
| goto out_disable_parent; |
| } |
| |
| phy->is_ref_clk_enabled = true; |
| goto out; |
| |
| out_disable_parent: |
| if (phy->ref_clk_parent) |
| clk_disable_unprepare(phy->ref_clk_parent); |
| out_disable_src: |
| clk_disable_unprepare(phy->ref_clk_src); |
| out: |
| return ret; |
| } |
| |
| static int ufs_qcom_phy_disable_vreg(struct device *dev, |
| struct ufs_qcom_phy_vreg *vreg) |
| { |
| int ret = 0; |
| |
| if (!vreg || !vreg->enabled) |
| goto out; |
| |
| ret = regulator_disable(vreg->reg); |
| |
| if (!ret) { |
| /* ignore errors on applying disable config */ |
| ufs_qcom_phy_cfg_vreg(dev, vreg, false); |
| vreg->enabled = false; |
| } else { |
| dev_err(dev, "%s: %s disable failed, err=%d\n", |
| __func__, vreg->name, ret); |
| } |
| out: |
| return ret; |
| } |
| |
| static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy) |
| { |
| if (phy->is_ref_clk_enabled) { |
| clk_disable_unprepare(phy->ref_clk); |
| /* |
| * "ref_clk_parent" is optional clock hence make sure that clk |
| * reference is available before trying to disable the clock. |
| */ |
| if (phy->ref_clk_parent) |
| clk_disable_unprepare(phy->ref_clk_parent); |
| clk_disable_unprepare(phy->ref_clk_src); |
| phy->is_ref_clk_enabled = false; |
| } |
| } |
| |
| /* Turn ON M-PHY RMMI interface clocks */ |
| static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy) |
| { |
| int ret = 0; |
| |
| if (phy->is_iface_clk_enabled) |
| goto out; |
| |
| ret = clk_prepare_enable(phy->tx_iface_clk); |
| if (ret) { |
| dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n", |
| __func__, ret); |
| goto out; |
| } |
| ret = clk_prepare_enable(phy->rx_iface_clk); |
| if (ret) { |
| clk_disable_unprepare(phy->tx_iface_clk); |
| dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n", |
| __func__, ret); |
| goto out; |
| } |
| phy->is_iface_clk_enabled = true; |
| |
| out: |
| return ret; |
| } |
| |
| /* Turn OFF M-PHY RMMI interface clocks */ |
| static void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy) |
| { |
| if (phy->is_iface_clk_enabled) { |
| clk_disable_unprepare(phy->tx_iface_clk); |
| clk_disable_unprepare(phy->rx_iface_clk); |
| phy->is_iface_clk_enabled = false; |
| } |
| } |
| |
| static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy *ufs_qcom_phy) |
| { |
| int ret = 0; |
| |
| if (!ufs_qcom_phy->phy_spec_ops->start_serdes) { |
| dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n", |
| __func__); |
| ret = -ENOTSUPP; |
| } else { |
| ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy); |
| } |
| |
| return ret; |
| } |
| |
| int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| int ret = 0; |
| |
| if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) { |
| dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n", |
| __func__); |
| ret = -ENOTSUPP; |
| } else { |
| ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy, |
| tx_lanes); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable); |
| |
| void ufs_qcom_phy_save_controller_version(struct phy *generic_phy, |
| u8 major, u16 minor, u16 step) |
| { |
| struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| |
| ufs_qcom_phy->host_ctrl_rev_major = major; |
| ufs_qcom_phy->host_ctrl_rev_minor = minor; |
| ufs_qcom_phy->host_ctrl_rev_step = step; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version); |
| |
| static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy *ufs_qcom_phy) |
| { |
| if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) { |
| dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n", |
| __func__); |
| return -ENOTSUPP; |
| } |
| |
| return ufs_qcom_phy->phy_spec_ops-> |
| is_physical_coding_sublayer_ready(ufs_qcom_phy); |
| } |
| |
| int ufs_qcom_phy_power_on(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); |
| struct device *dev = phy_common->dev; |
| bool is_rate_B = false; |
| int err; |
| |
| err = ufs_qcom_phy_get_reset(phy_common); |
| if (err) |
| return err; |
| |
| err = reset_control_assert(phy_common->ufs_reset); |
| if (err) |
| return err; |
| |
| if (phy_common->mode == PHY_MODE_UFS_HS_B) |
| is_rate_B = true; |
| |
| err = phy_common->phy_spec_ops->calibrate(phy_common, is_rate_B); |
| if (err) |
| return err; |
| |
| err = reset_control_deassert(phy_common->ufs_reset); |
| if (err) { |
| dev_err(dev, "Failed to assert UFS PHY reset"); |
| return err; |
| } |
| |
| err = ufs_qcom_phy_start_serdes(phy_common); |
| if (err) |
| return err; |
| |
| err = ufs_qcom_phy_is_pcs_ready(phy_common); |
| if (err) |
| return err; |
| |
| err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy); |
| if (err) { |
| dev_err(dev, "%s enable vdda_phy failed, err=%d\n", |
| __func__, err); |
| goto out; |
| } |
| |
| phy_common->phy_spec_ops->power_control(phy_common, true); |
| |
| /* vdda_pll also enables ref clock LDOs so enable it first */ |
| err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_pll); |
| if (err) { |
| dev_err(dev, "%s enable vdda_pll failed, err=%d\n", |
| __func__, err); |
| goto out_disable_phy; |
| } |
| |
| err = ufs_qcom_phy_enable_iface_clk(phy_common); |
| if (err) { |
| dev_err(dev, "%s enable phy iface clock failed, err=%d\n", |
| __func__, err); |
| goto out_disable_pll; |
| } |
| |
| err = ufs_qcom_phy_enable_ref_clk(phy_common); |
| if (err) { |
| dev_err(dev, "%s enable phy ref clock failed, err=%d\n", |
| __func__, err); |
| goto out_disable_iface_clk; |
| } |
| |
| /* enable device PHY ref_clk pad rail */ |
| if (phy_common->vddp_ref_clk.reg) { |
| err = ufs_qcom_phy_enable_vreg(dev, |
| &phy_common->vddp_ref_clk); |
| if (err) { |
| dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n", |
| __func__, err); |
| goto out_disable_ref_clk; |
| } |
| } |
| |
| goto out; |
| |
| out_disable_ref_clk: |
| ufs_qcom_phy_disable_ref_clk(phy_common); |
| out_disable_iface_clk: |
| ufs_qcom_phy_disable_iface_clk(phy_common); |
| out_disable_pll: |
| ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_pll); |
| out_disable_phy: |
| ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_phy); |
| out: |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on); |
| |
| int ufs_qcom_phy_power_off(struct phy *generic_phy) |
| { |
| struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); |
| |
| phy_common->phy_spec_ops->power_control(phy_common, false); |
| |
| if (phy_common->vddp_ref_clk.reg) |
| ufs_qcom_phy_disable_vreg(phy_common->dev, |
| &phy_common->vddp_ref_clk); |
| ufs_qcom_phy_disable_ref_clk(phy_common); |
| ufs_qcom_phy_disable_iface_clk(phy_common); |
| |
| ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll); |
| ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy); |
| reset_control_assert(phy_common->ufs_reset); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off); |
| |
| MODULE_AUTHOR("Yaniv Gardi <ygardi@codeaurora.org>"); |
| MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>"); |
| MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY"); |
| MODULE_LICENSE("GPL v2"); |