| // SPDX-License-Identifier: GPL-2.0 |
| /** |
| * debug.h - DesignWare USB3 DRD Controller Debug Header |
| * |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com |
| * |
| * Authors: Felipe Balbi <balbi@ti.com>, |
| * Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| */ |
| |
| #ifndef __DWC3_DEBUG_H |
| #define __DWC3_DEBUG_H |
| |
| #include "core.h" |
| |
| /** |
| * dwc3_gadget_ep_cmd_string - returns endpoint command string |
| * @cmd: command code |
| */ |
| static inline const char * |
| dwc3_gadget_ep_cmd_string(u8 cmd) |
| { |
| switch (cmd) { |
| case DWC3_DEPCMD_DEPSTARTCFG: |
| return "Start New Configuration"; |
| case DWC3_DEPCMD_ENDTRANSFER: |
| return "End Transfer"; |
| case DWC3_DEPCMD_UPDATETRANSFER: |
| return "Update Transfer"; |
| case DWC3_DEPCMD_STARTTRANSFER: |
| return "Start Transfer"; |
| case DWC3_DEPCMD_CLEARSTALL: |
| return "Clear Stall"; |
| case DWC3_DEPCMD_SETSTALL: |
| return "Set Stall"; |
| case DWC3_DEPCMD_GETEPSTATE: |
| return "Get Endpoint State"; |
| case DWC3_DEPCMD_SETTRANSFRESOURCE: |
| return "Set Endpoint Transfer Resource"; |
| case DWC3_DEPCMD_SETEPCONFIG: |
| return "Set Endpoint Configuration"; |
| default: |
| return "UNKNOWN command"; |
| } |
| } |
| |
| /** |
| * dwc3_gadget_generic_cmd_string - returns generic command string |
| * @cmd: command code |
| */ |
| static inline const char * |
| dwc3_gadget_generic_cmd_string(u8 cmd) |
| { |
| switch (cmd) { |
| case DWC3_DGCMD_SET_LMP: |
| return "Set LMP"; |
| case DWC3_DGCMD_SET_PERIODIC_PAR: |
| return "Set Periodic Parameters"; |
| case DWC3_DGCMD_XMIT_FUNCTION: |
| return "Transmit Function Wake Device Notification"; |
| case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO: |
| return "Set Scratchpad Buffer Array Address Lo"; |
| case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI: |
| return "Set Scratchpad Buffer Array Address Hi"; |
| case DWC3_DGCMD_SELECTED_FIFO_FLUSH: |
| return "Selected FIFO Flush"; |
| case DWC3_DGCMD_ALL_FIFO_FLUSH: |
| return "All FIFO Flush"; |
| case DWC3_DGCMD_SET_ENDPOINT_NRDY: |
| return "Set Endpoint NRDY"; |
| case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK: |
| return "Run SoC Bus Loopback Test"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| /** |
| * dwc3_gadget_link_string - returns link name |
| * @link_state: link state code |
| */ |
| static inline const char * |
| dwc3_gadget_link_string(enum dwc3_link_state link_state) |
| { |
| switch (link_state) { |
| case DWC3_LINK_STATE_U0: |
| return "U0"; |
| case DWC3_LINK_STATE_U1: |
| return "U1"; |
| case DWC3_LINK_STATE_U2: |
| return "U2"; |
| case DWC3_LINK_STATE_U3: |
| return "U3"; |
| case DWC3_LINK_STATE_SS_DIS: |
| return "SS.Disabled"; |
| case DWC3_LINK_STATE_RX_DET: |
| return "RX.Detect"; |
| case DWC3_LINK_STATE_SS_INACT: |
| return "SS.Inactive"; |
| case DWC3_LINK_STATE_POLL: |
| return "Polling"; |
| case DWC3_LINK_STATE_RECOV: |
| return "Recovery"; |
| case DWC3_LINK_STATE_HRESET: |
| return "Hot Reset"; |
| case DWC3_LINK_STATE_CMPLY: |
| return "Compliance"; |
| case DWC3_LINK_STATE_LPBK: |
| return "Loopback"; |
| case DWC3_LINK_STATE_RESET: |
| return "Reset"; |
| case DWC3_LINK_STATE_RESUME: |
| return "Resume"; |
| default: |
| return "UNKNOWN link state\n"; |
| } |
| } |
| |
| /** |
| * dwc3_gadget_hs_link_string - returns highspeed and below link name |
| * @link_state: link state code |
| */ |
| static inline const char * |
| dwc3_gadget_hs_link_string(enum dwc3_link_state link_state) |
| { |
| switch (link_state) { |
| case DWC3_LINK_STATE_U0: |
| return "On"; |
| case DWC3_LINK_STATE_U2: |
| return "Sleep"; |
| case DWC3_LINK_STATE_U3: |
| return "Suspend"; |
| case DWC3_LINK_STATE_SS_DIS: |
| return "Disconnected"; |
| case DWC3_LINK_STATE_RX_DET: |
| return "Early Suspend"; |
| case DWC3_LINK_STATE_RECOV: |
| return "Recovery"; |
| case DWC3_LINK_STATE_RESET: |
| return "Reset"; |
| case DWC3_LINK_STATE_RESUME: |
| return "Resume"; |
| default: |
| return "UNKNOWN link state\n"; |
| } |
| } |
| |
| /** |
| * dwc3_trb_type_string - returns TRB type as a string |
| * @type: the type of the TRB |
| */ |
| static inline const char *dwc3_trb_type_string(unsigned int type) |
| { |
| switch (type) { |
| case DWC3_TRBCTL_NORMAL: |
| return "normal"; |
| case DWC3_TRBCTL_CONTROL_SETUP: |
| return "setup"; |
| case DWC3_TRBCTL_CONTROL_STATUS2: |
| return "status2"; |
| case DWC3_TRBCTL_CONTROL_STATUS3: |
| return "status3"; |
| case DWC3_TRBCTL_CONTROL_DATA: |
| return "data"; |
| case DWC3_TRBCTL_ISOCHRONOUS_FIRST: |
| return "isoc-first"; |
| case DWC3_TRBCTL_ISOCHRONOUS: |
| return "isoc"; |
| case DWC3_TRBCTL_LINK_TRB: |
| return "link"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static inline const char *dwc3_ep0_state_string(enum dwc3_ep0_state state) |
| { |
| switch (state) { |
| case EP0_UNCONNECTED: |
| return "Unconnected"; |
| case EP0_SETUP_PHASE: |
| return "Setup Phase"; |
| case EP0_DATA_PHASE: |
| return "Data Phase"; |
| case EP0_STATUS_PHASE: |
| return "Status Phase"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| /** |
| * dwc3_gadget_event_string - returns event name |
| * @event: the event code |
| */ |
| static inline const char *dwc3_gadget_event_string(char *str, size_t size, |
| const struct dwc3_event_devt *event) |
| { |
| enum dwc3_link_state state = event->event_info & DWC3_LINK_STATE_MASK; |
| |
| switch (event->type) { |
| case DWC3_DEVICE_EVENT_DISCONNECT: |
| snprintf(str, size, "Disconnect: [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_RESET: |
| snprintf(str, size, "Reset [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_CONNECT_DONE: |
| snprintf(str, size, "Connection Done [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: |
| snprintf(str, size, "Link Change [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_WAKEUP: |
| snprintf(str, size, "WakeUp [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_EOPF: |
| snprintf(str, size, "End-Of-Frame [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_SOF: |
| snprintf(str, size, "Start-Of-Frame [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_ERRATIC_ERROR: |
| snprintf(str, size, "Erratic Error [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_CMD_CMPL: |
| snprintf(str, size, "Command Complete [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_OVERFLOW: |
| snprintf(str, size, "Overflow [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| default: |
| snprintf(str, size, "UNKNOWN"); |
| } |
| |
| return str; |
| } |
| |
| static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str, |
| size_t size) |
| { |
| switch (t & USB_RECIP_MASK) { |
| case USB_RECIP_DEVICE: |
| snprintf(str, size, "Get Device Status(Length = %d)", l); |
| break; |
| case USB_RECIP_INTERFACE: |
| snprintf(str, size, "Get Interface Status(Intf = %d, Length = %d)", |
| i, l); |
| break; |
| case USB_RECIP_ENDPOINT: |
| snprintf(str, size, "Get Endpoint Status(ep%d%s)", |
| i & ~USB_DIR_IN, |
| i & USB_DIR_IN ? "in" : "out"); |
| break; |
| } |
| } |
| |
| static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v, |
| __u16 i, char *str, size_t size) |
| { |
| switch (t & USB_RECIP_MASK) { |
| case USB_RECIP_DEVICE: |
| snprintf(str, size, "%s Device Feature(%s%s)", |
| b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", |
| ({char *s; |
| switch (v) { |
| case USB_DEVICE_SELF_POWERED: |
| s = "Self Powered"; |
| break; |
| case USB_DEVICE_REMOTE_WAKEUP: |
| s = "Remote Wakeup"; |
| break; |
| case USB_DEVICE_TEST_MODE: |
| s = "Test Mode"; |
| break; |
| case USB_DEVICE_U1_ENABLE: |
| s = "U1 Enable"; |
| break; |
| case USB_DEVICE_U2_ENABLE: |
| s = "U2 Enable"; |
| break; |
| case USB_DEVICE_LTM_ENABLE: |
| s = "LTM Enable"; |
| break; |
| default: |
| s = "UNKNOWN"; |
| } s; }), |
| v == USB_DEVICE_TEST_MODE ? |
| ({ char *s; |
| switch (i) { |
| case TEST_J: |
| s = ": TEST_J"; |
| break; |
| case TEST_K: |
| s = ": TEST_K"; |
| break; |
| case TEST_SE0_NAK: |
| s = ": TEST_SE0_NAK"; |
| break; |
| case TEST_PACKET: |
| s = ": TEST_PACKET"; |
| break; |
| case TEST_FORCE_EN: |
| s = ": TEST_FORCE_EN"; |
| break; |
| default: |
| s = ": UNKNOWN"; |
| } s; }) : ""); |
| break; |
| case USB_RECIP_INTERFACE: |
| snprintf(str, size, "%s Interface Feature(%s)", |
| b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", |
| v == USB_INTRF_FUNC_SUSPEND ? |
| "Function Suspend" : "UNKNOWN"); |
| break; |
| case USB_RECIP_ENDPOINT: |
| snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)", |
| b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", |
| v == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN", |
| i & ~USB_DIR_IN, |
| i & USB_DIR_IN ? "in" : "out"); |
| break; |
| } |
| } |
| |
| static inline void dwc3_decode_set_address(__u16 v, char *str, size_t size) |
| { |
| snprintf(str, size, "Set Address(Addr = %02x)", v); |
| } |
| |
| static inline void dwc3_decode_get_set_descriptor(__u8 t, __u8 b, __u16 v, |
| __u16 i, __u16 l, char *str, size_t size) |
| { |
| snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)", |
| b == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set", |
| ({ char *s; |
| switch (v >> 8) { |
| case USB_DT_DEVICE: |
| s = "Device"; |
| break; |
| case USB_DT_CONFIG: |
| s = "Configuration"; |
| break; |
| case USB_DT_STRING: |
| s = "String"; |
| break; |
| case USB_DT_INTERFACE: |
| s = "Interface"; |
| break; |
| case USB_DT_ENDPOINT: |
| s = "Endpoint"; |
| break; |
| case USB_DT_DEVICE_QUALIFIER: |
| s = "Device Qualifier"; |
| break; |
| case USB_DT_OTHER_SPEED_CONFIG: |
| s = "Other Speed Config"; |
| break; |
| case USB_DT_INTERFACE_POWER: |
| s = "Interface Power"; |
| break; |
| case USB_DT_OTG: |
| s = "OTG"; |
| break; |
| case USB_DT_DEBUG: |
| s = "Debug"; |
| break; |
| case USB_DT_INTERFACE_ASSOCIATION: |
| s = "Interface Association"; |
| break; |
| case USB_DT_BOS: |
| s = "BOS"; |
| break; |
| case USB_DT_DEVICE_CAPABILITY: |
| s = "Device Capability"; |
| break; |
| case USB_DT_PIPE_USAGE: |
| s = "Pipe Usage"; |
| break; |
| case USB_DT_SS_ENDPOINT_COMP: |
| s = "SS Endpoint Companion"; |
| break; |
| case USB_DT_SSP_ISOC_ENDPOINT_COMP: |
| s = "SSP Isochronous Endpoint Companion"; |
| break; |
| default: |
| s = "UNKNOWN"; |
| break; |
| } s; }), v & 0xff, l); |
| } |
| |
| |
| static inline void dwc3_decode_get_configuration(__u16 l, char *str, |
| size_t size) |
| { |
| snprintf(str, size, "Get Configuration(Length = %d)", l); |
| } |
| |
| static inline void dwc3_decode_set_configuration(__u8 v, char *str, size_t size) |
| { |
| snprintf(str, size, "Set Configuration(Config = %d)", v); |
| } |
| |
| static inline void dwc3_decode_get_intf(__u16 i, __u16 l, char *str, |
| size_t size) |
| { |
| snprintf(str, size, "Get Interface(Intf = %d, Length = %d)", i, l); |
| } |
| |
| static inline void dwc3_decode_set_intf(__u8 v, __u16 i, char *str, size_t size) |
| { |
| snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)", i, v); |
| } |
| |
| static inline void dwc3_decode_synch_frame(__u16 i, __u16 l, char *str, |
| size_t size) |
| { |
| snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)", i, l); |
| } |
| |
| static inline void dwc3_decode_set_sel(__u16 l, char *str, size_t size) |
| { |
| snprintf(str, size, "Set SEL(Length = %d)", l); |
| } |
| |
| static inline void dwc3_decode_set_isoch_delay(__u8 v, char *str, size_t size) |
| { |
| snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", v); |
| } |
| |
| /** |
| * dwc3_decode_ctrl - returns a string represetion of ctrl request |
| */ |
| static inline const char *dwc3_decode_ctrl(char *str, size_t size, |
| __u8 bRequestType, __u8 bRequest, __u16 wValue, __u16 wIndex, |
| __u16 wLength) |
| { |
| switch (bRequest) { |
| case USB_REQ_GET_STATUS: |
| dwc3_decode_get_status(bRequestType, wIndex, wLength, str, |
| size); |
| break; |
| case USB_REQ_CLEAR_FEATURE: |
| case USB_REQ_SET_FEATURE: |
| dwc3_decode_set_clear_feature(bRequestType, bRequest, wValue, |
| wIndex, str, size); |
| break; |
| case USB_REQ_SET_ADDRESS: |
| dwc3_decode_set_address(wValue, str, size); |
| break; |
| case USB_REQ_GET_DESCRIPTOR: |
| case USB_REQ_SET_DESCRIPTOR: |
| dwc3_decode_get_set_descriptor(bRequestType, bRequest, wValue, |
| wIndex, wLength, str, size); |
| break; |
| case USB_REQ_GET_CONFIGURATION: |
| dwc3_decode_get_configuration(wLength, str, size); |
| break; |
| case USB_REQ_SET_CONFIGURATION: |
| dwc3_decode_set_configuration(wValue, str, size); |
| break; |
| case USB_REQ_GET_INTERFACE: |
| dwc3_decode_get_intf(wIndex, wLength, str, size); |
| break; |
| case USB_REQ_SET_INTERFACE: |
| dwc3_decode_set_intf(wValue, wIndex, str, size); |
| break; |
| case USB_REQ_SYNCH_FRAME: |
| dwc3_decode_synch_frame(wIndex, wLength, str, size); |
| break; |
| case USB_REQ_SET_SEL: |
| dwc3_decode_set_sel(wLength, str, size); |
| break; |
| case USB_REQ_SET_ISOCH_DELAY: |
| dwc3_decode_set_isoch_delay(wValue, str, size); |
| break; |
| default: |
| snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x", |
| bRequestType, bRequest, |
| cpu_to_le16(wValue) & 0xff, |
| cpu_to_le16(wValue) >> 8, |
| cpu_to_le16(wIndex) & 0xff, |
| cpu_to_le16(wIndex) >> 8, |
| cpu_to_le16(wLength) & 0xff, |
| cpu_to_le16(wLength) >> 8); |
| } |
| |
| return str; |
| } |
| |
| /** |
| * dwc3_ep_event_string - returns event name |
| * @event: then event code |
| */ |
| static inline const char *dwc3_ep_event_string(char *str, size_t size, |
| const struct dwc3_event_depevt *event, u32 ep0state) |
| { |
| u8 epnum = event->endpoint_number; |
| size_t len; |
| int status; |
| int ret; |
| |
| ret = snprintf(str, size, "ep%d%s: ", epnum >> 1, |
| (epnum & 1) ? "in" : "out"); |
| if (ret < 0) |
| return "UNKNOWN"; |
| |
| status = event->status; |
| |
| switch (event->endpoint_event) { |
| case DWC3_DEPEVT_XFERCOMPLETE: |
| len = strlen(str); |
| snprintf(str + len, size - len, "Transfer Complete (%c%c%c)", |
| status & DEPEVT_STATUS_SHORT ? 'S' : 's', |
| status & DEPEVT_STATUS_IOC ? 'I' : 'i', |
| status & DEPEVT_STATUS_LST ? 'L' : 'l'); |
| |
| len = strlen(str); |
| |
| if (epnum <= 1) |
| snprintf(str + len, size - len, " [%s]", |
| dwc3_ep0_state_string(ep0state)); |
| break; |
| case DWC3_DEPEVT_XFERINPROGRESS: |
| len = strlen(str); |
| |
| snprintf(str + len, size - len, "Transfer In Progress [%d] (%c%c%c)", |
| event->parameters, |
| status & DEPEVT_STATUS_SHORT ? 'S' : 's', |
| status & DEPEVT_STATUS_IOC ? 'I' : 'i', |
| status & DEPEVT_STATUS_LST ? 'M' : 'm'); |
| break; |
| case DWC3_DEPEVT_XFERNOTREADY: |
| len = strlen(str); |
| |
| snprintf(str + len, size - len, "Transfer Not Ready [%d]%s", |
| event->parameters, |
| status & DEPEVT_STATUS_TRANSFER_ACTIVE ? |
| " (Active)" : " (Not Active)"); |
| |
| len = strlen(str); |
| |
| /* Control Endpoints */ |
| if (epnum <= 1) { |
| int phase = DEPEVT_STATUS_CONTROL_PHASE(event->status); |
| |
| switch (phase) { |
| case DEPEVT_STATUS_CONTROL_DATA: |
| snprintf(str + ret, size - ret, |
| " [Data Phase]"); |
| break; |
| case DEPEVT_STATUS_CONTROL_STATUS: |
| snprintf(str + ret, size - ret, |
| " [Status Phase]"); |
| } |
| } |
| break; |
| case DWC3_DEPEVT_RXTXFIFOEVT: |
| snprintf(str + ret, size - ret, "FIFO"); |
| break; |
| case DWC3_DEPEVT_STREAMEVT: |
| status = event->status; |
| |
| switch (status) { |
| case DEPEVT_STREAMEVT_FOUND: |
| snprintf(str + ret, size - ret, " Stream %d Found", |
| event->parameters); |
| break; |
| case DEPEVT_STREAMEVT_NOTFOUND: |
| default: |
| snprintf(str + ret, size - ret, " Stream Not Found"); |
| break; |
| } |
| |
| break; |
| case DWC3_DEPEVT_EPCMDCMPLT: |
| snprintf(str + ret, size - ret, "Endpoint Command Complete"); |
| break; |
| default: |
| snprintf(str, size, "UNKNOWN"); |
| } |
| |
| return str; |
| } |
| |
| /** |
| * dwc3_gadget_event_type_string - return event name |
| * @event: the event code |
| */ |
| static inline const char *dwc3_gadget_event_type_string(u8 event) |
| { |
| switch (event) { |
| case DWC3_DEVICE_EVENT_DISCONNECT: |
| return "Disconnect"; |
| case DWC3_DEVICE_EVENT_RESET: |
| return "Reset"; |
| case DWC3_DEVICE_EVENT_CONNECT_DONE: |
| return "Connect Done"; |
| case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: |
| return "Link Status Change"; |
| case DWC3_DEVICE_EVENT_WAKEUP: |
| return "Wake-Up"; |
| case DWC3_DEVICE_EVENT_HIBER_REQ: |
| return "Hibernation"; |
| case DWC3_DEVICE_EVENT_EOPF: |
| return "End of Periodic Frame"; |
| case DWC3_DEVICE_EVENT_SOF: |
| return "Start of Frame"; |
| case DWC3_DEVICE_EVENT_ERRATIC_ERROR: |
| return "Erratic Error"; |
| case DWC3_DEVICE_EVENT_CMD_CMPL: |
| return "Command Complete"; |
| case DWC3_DEVICE_EVENT_OVERFLOW: |
| return "Overflow"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static inline const char *dwc3_decode_event(char *str, size_t size, u32 event, |
| u32 ep0state) |
| { |
| const union dwc3_event evt = (union dwc3_event) event; |
| |
| if (evt.type.is_devspec) |
| return dwc3_gadget_event_string(str, size, &evt.devt); |
| else |
| return dwc3_ep_event_string(str, size, &evt.depevt, ep0state); |
| } |
| |
| static inline const char *dwc3_ep_cmd_status_string(int status) |
| { |
| switch (status) { |
| case -ETIMEDOUT: |
| return "Timed Out"; |
| case 0: |
| return "Successful"; |
| case DEPEVT_TRANSFER_NO_RESOURCE: |
| return "No Resource"; |
| case DEPEVT_TRANSFER_BUS_EXPIRY: |
| return "Bus Expiry"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static inline const char *dwc3_gadget_generic_cmd_status_string(int status) |
| { |
| switch (status) { |
| case -ETIMEDOUT: |
| return "Timed Out"; |
| case 0: |
| return "Successful"; |
| case 1: |
| return "Error"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| |
| #ifdef CONFIG_DEBUG_FS |
| extern void dwc3_debugfs_init(struct dwc3 *); |
| extern void dwc3_debugfs_exit(struct dwc3 *); |
| #else |
| static inline void dwc3_debugfs_init(struct dwc3 *d) |
| { } |
| static inline void dwc3_debugfs_exit(struct dwc3 *d) |
| { } |
| #endif |
| #endif /* __DWC3_DEBUG_H */ |